Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Application of Time-Domain 1 H NMR for Investigating Dynamics of Vegetative Lipids in Bioenergy Crops at Different Developmental Stages

Sweet sorghum is typically cultivated for the food and fodder market. Recently, sweet sorghum varieties are being metabolically transitioned to enhance energy density by accumulating oil droplets in their vegetative tissues for bioenergy applications. Owing to the high biomass yield of sorghum, the transgenic lines can compete with oil-seed crops for biodiesel yield per unit area. In the initial phase of transgenic development, a high-throughput phenotyping method can bridge the gap between the production pipeline and analysis to improve the efficiency of the process. To meet the requirement, the present study extends the application of time-domain 1 H-NMR spectroscopy for rapid quantification and characterization of the total in-situ lipids of sweet sorghum ‘ramada’ to lay the groundwork for analyzing the upcoming large quantity of transgenic samples. NMR technology has been successfully established for analyzing lipid contents of vegetative tissues of non-transgenic variety. The multiexponential analysis of spin-lattice (T 1 ) relaxation spectra obtained from TD-NMR aided the investigation of the dynamics of the free and bound lipid fraction with plant development. The total lipid concentration of bagasse and leaves of non-transgenic sweet sorghum remained unchanged throughout the plant development. Leaves displayed a higher percentage of bound lipids as compared to bagasse. Here, a significant variation in the lipid concentration of juice was observed at the different growth stages with a maximum lipid accumulation of 1.21 ± 0.04% w/w at the boot stage that decreased with further maturity of the plant.

59 BASIC BIOLOGICAL SCIENCES↗

Sharp detection of low-dimensional structure in probability measures via dimensional logarithmic Sobolev inequalities

Identifying low-dimensional structure in high-dimensional probability measures is an essential pre-processing step for efficient sampling. To identify this structure, we approximate the target measure as a perturbation of an arbitrary reference measure along a few directions in $\mathbb{R}^{d}$. These directions are determined by minimizing an upper bound on the Kullback–Leibler (KL) divergence between the target and its approximation. Our contribution improves upon previous works by leveraging dimensional logarithmic Sobolev inequalities to refine the bound on the KL divergence. These inequalities lead to a uniformly tighter bound on the KL divergence, thereby enhancing the identification of the most significant perturbation directions. In particular, when the target and reference are both Gaussian, minimizing the resulting bound is equivalent to minimizing the KL divergence. We further demonstrate the applicability of this analysis to the squared Hellinger distance, where analogous reasoning shows that the dimensional Poincaré inequality offers improved bounds.

Bayesian inference↗

Spatial filtering of light by chirped photonic crystals

We propose an efficient method for spatial filtering of light beams by propagating them through two-dimensional (also three dimensional) chirped photonic crystals, i.e., through the photonic structures with fixed transverse lattice period and with the longitudinal lattice period varying along the direction of the beam propagation. We prove the proposed idea by numerically solving the paraxial propagation equation in refraction-index-modulated media and we evaluate the efficiency of the process by harmonic-expansion analysis. The technique can be also applied for filtering (for cleaning) of the packages of atomic waves (Bose condensates), also to improve the directionality of acoustic and mechanical waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Widely tunable femtosecond solitonic radiation in photonic crystal fiber cladding

We report on a means to generate tunable ultrashort optical pulses. We demonstrate that dispersive waves generated by solitons within the small-core features of a photonic crystal fiber cladding can be used to obtain femtosecond pulses tunable over an octave-wide spectral range. The generation process is highly efficient and occurs at the relatively low laser powers available from a simple Ti:sapphire laser oscillator. The described phenomenon is general and will play an important role in other systems where solitons are known to exist.

74 ATOMIC AND MOLECULAR PHYSICS↗

Gravity Waves from the Nonperturbative Decay of Condensates along Supersymmetric Flat Directions

Nonperturbative effects may lead to an explosive decay of flat direction condensates in supersymmetric theories. We confirm the efficiency of this process with lattice simulations: After only one to five rotations of the condensates in their complex plane, most of their energy is converted into inhomogeneous fluctuations. This generates a gravitational wave background, which depends on the inflaton sector and falls in the hertz-kilohertz frequency range today. These gravity waves can be observable by upcoming experiments such as Advanced LIGO and depend crucially on (i) the initial vacuum expectation value of flat directions when they start to oscillate, (ii) their soft supersymmetry-breaking mass, and (iii) the reheat temperature of the Universe. This signal could open a new observational window on inflation and low-energy supersymmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving I/O Performance for Exascale Applications through Online Data Layout Reorganization

The applications being developed within the U.S. Exascale Computing Project (ECP) to run on imminent Exascale computers will generate scientific results with unprecedented fidelity and record turn-around time. Many of these codes are based on particle-mesh methods and use advanced algorithms, especially dynamic load-balancing and mesh-refinement, to achieve high performance on Exascale machines. Yet, as such algorithms improve parallel application efficiency, they raise new challenges for I/O logic due to their irregular and dynamic data distributions. Thus, while the enormous data rates of Exascale simulations already challenge existing file system write strategies, the need for efficient read and processing of generated data introduces additional constraints on the data layout strategies that can be used when writing data to secondary storage. We review these I/O challenges and introduce two online data layout reorganization approaches for achieving good tradeoffs between read and write performance. We demonstrate the benefits of using these two approaches for the ECP particle-in-cell simulation WarpX, which serves as a motif for a large class of important Exascale applications. Here, we show that by understanding application I/O patterns and carefully designing data layouts we can increase read performance by more than 80 percent.

97 MATHEMATICS AND COMPUTING↗

Atomic-Level, Energy-Conversion Heat Transfer

Abstract Heat is stored in quanta of kinetic and potential energies in matter. The temperature represents the equilibrium and excited occupation (boson) of these energy conditions. Temporal and spatial temperature variations and heat transfer are associated with the kinetics of these equilibrium excitations. During energy-conversion (between electron and phonon systems), the occupancies deviate from equilibria, while holding atomic-scale, inelastic spectral energy transfer kinetics. Heat transfer physics reaches nonequilibrium energy excitations and kinetics among the principal carriers, phonon, electron (and holes and ions), fluid particle, and photon. This allows atomic-level tailoring of energetic materials and energy-conversion processes and their efficiencies. For example, modern thermal-electric harvesters have transformed broad-spectrum, high-entropy heat into a narrow spectrum of low-entropy emissions to efficiently generate thermal electricity. Phonoelectricity, in contrast, intervenes before a low-entropy population of nonequilibrium optical phonons becomes a high-entropy heat. In particular, the suggested phonovoltaic cell generates phonoelectricity by employing the nonequilibrium, low-entropy, and elevated temperature optical-phonon produced population—for example, by relaxing electrons, excited by an electric field. A phonovoltaic material has an ultranarrow electronic bandgap, such that the hot optical-phonon population can relax by producing electron-hole pairs (and power) instead of multiple acoustic phonons (and entropy). Examples of these quanta and spectral heat transfer are reviewed, contemplating a prospect for education and research in this field.

Engineering↗

Asphaltene-induced spontaneous emulsification: Effects of interfacial co-adsorption and viscoelasticity

Asphaltenes are a class of high molecular weight aromatic compounds found in crude oil. They adsorb onto toluene-water interfaces and induce a spontaneous emulsification phenomenon, whereby stable water-in-oil emulsions form without the need of an external energy input. This work aims to control and understand the factors affecting spontaneous droplet formation in the presence of asphaltene adsorption. This is particularly useful for crude oil refining, where the presence of a stable emulsion hampers the efficiency of downstream processing operations. We explore the effect of the addition of copolymers designed as crude oil flow improvers as a means to control the extent of emulsion formation. We find that the polymers competitively adsorb onto the toluene-water interface and diminish spontaneous emulsification. Additionally, we conduct fluorescence microscopy experiments and measurements of the interfacial energy to determine the mechanism of spontaneous emulsification in asphaltene systems. We conclude that an emulsion forms via the diffusion of molecular water into the oil phase and subsequent binding with asphaltene aggregates, leading to the nucleation of micrometer-sized water droplets. We find that the polymer forms complexes with the dissolved asphaltenes, possibly hampering the ability of diffused water to bind to the asphaltenes and reducing the extent of spontaneous emulsification. Finally, we investigate the role of interfacial shear and dilatational viscoelasticity to better understand which fundamental interfacial properties are important in the emulsification of asphaltene-laden systems. We find that the rate of formation of an interfacial microstructural network is inversely correlated with the extent and rate of spontaneous emulsification.

42 ENGINEERING↗

Addressing Spacer Channel Resistances in MCDI Using Porous and Pliable Ionic Conductors

Membrane capacitive deionization (MCDI) is a unique electrochemical separations platform that allows for energy recovery during electrode regeneration. Similar to other electrochemical separation technologies producing deionized water (e.g. electrodialysis), ohmic resistances in the spacer channel significantly hampers the performance and energy efficiency of the process. This work devised a series of ionomer coated nylon mesh nets to address spacer channel resistances in MCDI. Under constant current operation, the ionomer coated nylon meshes displayed a 300 mV lower cell voltage rise during deionization while sustaining the same deionization rate. Furthermore, energy recovery was improved by 1.4x to 5.5x depending on the saline feed concentration. The lower cell voltage rise during deionization combined with the greater energy recovery with ionomer coated meshes resulted in energy normalized adsorbed salt (ENAS) values that were 2x to 3x greater. Addressing the spacer channel resistances in MCDI allowed for 8% to 19% increase in current density without the cell voltage exceeding 1.6 V—the upper bound set for mitigating parasitic reactions. Operating at higher current density leads to smaller MCDI units for a given deionization requirement and has implications for reducing the capital costs of the MCDI unit.

Palakkal, Varada Menon (ORCID:0000000317038323)↗

Evaluation of Lithium Metal Anode Volumetric Expansion through Laser Plasma Focused Ion Beam Cross-Sectional Imaging

Lithium metal is an ideal anode for high energy density batteries, however the implementation of lithium metal anodes remains challenging. Beyond the development of highly efficient electrolytes, degradation processes restrict cycle life and reduce practical energy density. Herein lithium volumetric expansion and degradation pathways are studied in half cells through coupling electrochemical analysis with cross-sectional imaging of the intact electrode stack using a cryogenic laser plasma focused ion beam and scanning electron microscope. Here, we find that the volumetric capacity is compromised as early as the first cycle, at best reaching values only half the theoretical capacity (1033 vs 2045 mAh cm -3 ). By the 101st electrodeposition, the practical volumetric capacity decreases to values ranging from 143 to 343 mAh cm -3 .

25 ENERGY STORAGE↗

Exploring Flood Predictability in Taiwan through Coupled Atmospheric–Hydrological and High-Performance Hydrodynamic Models

Effective flood simulation capabilities can tremendously support early warning and disaster prevention. To examine the applicability of a fully physics-based and high-performance flood simulation and forecasting modeling framework for a flood-prone region in Taiwan, we conduct a numerical experiment that couples the Weather Research and Forecasting (WRF) Model, WRF-Hydrological modeling system (WRF-Hydro), and the Two-Dimensional Runoff Inundation Toolkit for Operational Needs (TRITON) to perform integrated rainfall, streamflow, and flood simulations. Furthermore, we first use the coupled WRF and WRF-Hydro (WWH) to predict rainfall and streamflow and then drive TRITON with the predicted streamflow hydrographs to simulate flood depth and inundation area. With the refined spatial resolution and parameterization, this framework can better predict rainfall with reasonable spatial patterns. Although WWH could overestimate the amount of rainfall in some areas, the uncertain rainfall–streamflow predictions produce reasonable flood maps able to pinpoint regions at risk of flooding. In terms of model efficiency, the graphics processing unit–based computation can yield a speed-up factor as high as ∼13 compared to the central processing unit–based computation, promoting the efficacy of the coupled modeling framework in practical real-time flood forecasting.

Coupled models↗

Multi-omic characterization of a soil microbial consortium reveals critical role of succinate and glutamate metabolism during calcium carbonate precipitation

Microbially induced calcium carbonate precipitation (MICP) holds potential for use in soil stabilization and carbon sequestration, with the overall efficiency of the process being a major determinant for use in many environmental and civil engineering applications. While the biogeochemical pathways and enzymes driving MICP are known, the microbial metabolic networks and community dynamics underlying such precipitation remain poorly characterized. To address this gap, we developed a four-member consortium of soil bacteria (Curtobacterium flaccumfaciens, Rhodococcus qingshengii, Microbacterium sp., and Bacillus toyonensis), termed carbon storing consortium - A (CSC-A), that is capable of MICP. Prior work shows that MICP production is higher in CSC-A compared to the sum of carbonate produced by each member, suggesting carbonate production is driven by consortium dynamics. To that end we used a multi-omic integration approach of genomics, transcriptomics, and metabolomics to investigate potential inter-species interactions that may influence the MICP phenotype. Genomic life history characterizations identified evidence of niche specialization by B. toyonensis and Microbacterium, while metatranscriptomic analysis suggests R. qingshengii is a keystone species during growth in urea. By comparing individual species’ metabolomes to the metabolic profile of a shared well of precipitated metabolites, we identified over 200 metabolites predicted to be produced or consumed by CSC-A members. Integrating both data types to search the KEGG reactome highlighted a network centered around glutamine metabolism and branched chain amino acid biosynthesis under regulation during CSC-A growth in urea. Succinate metabolism was also a major node in this network and laboratory assays confirmed that increasing the amount of succinate in the growth medium leads to increased carbonate precipitation by CSC-A, a critical confirmation of our modeling approach. By isolating and identifying the interconnected metabolic components underlying MICP in CSC-A, we identified keystone taxa, metabolites, and pathways important for future optimization of the application of this consortia to carbonate precipitation.

carbon storing consortium - A (CSC-A)↗

Data for Application of Time-Domain 1H NMR for Investigating Dynamics of Vegetative Lipids in Bioenergy Crops at Different Developmental Stages

Sweet sorghum is typically cultivated for the food and fodder market. Recently, sweet sorghum varieties are being metabolically transitioned to enhance energy density by accumulating oil droplets in their vegetative tissues for bioenergy applications. Owing to the high biomass yield of sorghum, the transgenic lines can compete with oil-seed crops for biodiesel yield per unit area. In the initial phase of transgenic development, a high-throughput phenotyping method can bridge the gap between the production pipeline and analysis to improve the efficiency of the process. To meet the requirement, the present study extends the application of time-domain 1H-NMR spectroscopy for rapid quantification and characterization of the total in-situ lipids of sweet sorghum ‘ramada’ to lay the groundwork for analyzing the upcoming large quantity of transgenic samples. NMR technology has been successfully established for analyzing lipid contents of vegetative tissues of non-transgenic variety. The multiexponential analysis of spin-lattice (T1) relaxation spectra obtained from TD-NMR aided the investigation of the dynamics of the free and bound lipid fraction with plant development. The total lipid concentration of bagasse and leaves of non-transgenic sweet sorghum remained unchanged throughout the plant development. Leaves displayed a higher percentage of bound lipids as compared to bagasse. A significant variation in the lipid concentration of juice was observed at the different growth stages with a maximum lipid accumulation of 1.21 ± 0.04% w/w at the boot stage that decreased with further maturity of the plant.

Biomass Analytics↗

Data for Catalyst and Reactor Design Considerations for Selective Production of Acids by Oxidative Cleavage of Alkenes with H2O2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η2-O2) complexes vs. H2O2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H2O2 concentrations. Semi-batch reactors with continuous introduction of H2O2 solutions offer the means to maintain low H2O2 concentrations while providing sufficient quantities of H2O2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. This kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H2O2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H2O2 feed rate increases selectivity towards oxidative cleavage products and selective use of H2O2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semi-batch reactors with optimized molar feed rates of H2O2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H2O2 selectivity (3% to 30%). In addition, semi-batch reaction conditions used avoid H2O2-mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H2O2.

Catalysis↗

Impact of longitudinal phase-matching variations on three-wave nonlinear interactions

A general study of three-wave nonlinear mixing in the presence of longitudinal variations in phase-matching conditions is presented. The efficiency of second-harmonic generation and optical parametric amplification is quantified using a normalized set of equations and a polynomial description of the wave-vector mismatch as a function of the longitudinal coordinate. These modeling results are used to estimate the impact of spatial variations in wave-vector mismatch experimentally obtained for five partially deuterated potassium dihydrogen phosphate crystals. The longitudinal inhomogeneities in the properties of crystals of similar quality are not expected to have a significant impact on their use for second-harmonic generation and optical parametric amplification, but the efficiency of nonlinear processes in crystals with larger variations could decrease.

36 MATERIALS SCIENCE↗

Scientific data analysis on data-parallel platforms.

As scientific computing users migrate to petaflop platforms that promise to generate multi-terabyte datasets, there is a growing need in the community to be able to embed sophisticated analysis algorithms in the computing platforms' storage systems. Data Warehouse Appliances (DWAs) are attractive for this work, due to their ability to store and process massive datasets efficiently. While DWAs have been utilized effectively in data-mining and informatics applications, they remain largely unproven in scientific workloads. In this paper we present our experiences in adapting two mesh analysis algorithms to function on five different DWA architectures: two Netezza database appliances, an XtremeData dbX database, a LexisNexis DAS, and multiple Hadoop MapReduce clusters. The main contribution of this work is insight into the differences between these DWAs from a user's perspective. In addition, we present performance measurements for ten DWA systems to help understand the impact of different architectural trade-offs in these systems.

99 GENERAL AND MISCELLANEOUS↗