Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Rotational modulation of the chromospheric activity in Chi(1) Orionis (G0 V)

The age and rotation period of the solar type star Chi(1) Ori recommend it for a rotational modulation study of its strong UV emission lines. IUE observations have accordingly been made at four different phases during each of three separate rotation cycles, over a time span of 325 days. C IV, He II, and Mg II observations are consistent with a uniform spatial distribution and brightness for the Mg II emission network, and a more complex distribution of the regions producing the UV transmission region emission. Alternatively, if the area coverage of the chromospheric and transition region emission is nearly identical, the surface brightness contrast between stellar active regions and normal ones must increase by almost an order of magnitude in the higher temperature lines.

Simon, T.↗
NASA NTRS1985

Mephisto: Interfacial Destabilization in Metal Alloys

The destabilizing mechanisms at a solidification interface were studied to obtain information on the kinetics and morphologies in the transient and steady state, and to separate the influences of liquid phase instabilities from interfacial instabilities. A differential seebeck voltage measurements technique was developed to provide a continuous record of the solid-liquid interface temperature as the solidification rate is varied to determine the kinetic coefficients. Signal processing and noise suppression techniques allow nonovolt precision which corresponds to mK accuracy for the interfacial temperature.

Favier, J. J.↗
NASA NTRS1988

Development of a liquid-fed water resistojet

A concept for a forced-flow once-through water vaporizer for application to resistojet thrusters was evaluated as an element of a laboratory model thruster and tested to investigate its operating characteristics. The vaporizer design concept employs flow swirling to attach the liquid flow to the boiler chamber wall, providing for separation of the two liquid phases. This vaporizer was modified with a nozzle and a centrally-located heater to facilitate vaporization, superheating, and expansion of the propellant, allowing it to function as a resistojet. Performance was measured at thrust levels ranging from 170 to 360 mN and at power levels ranging from 443 to 192 W. Maximum measured specific impulse was 192 sec.

Morren, W. Earl↗
NASA NTRS1988

Development of a liquid-fed water resistojet

A concept for a forced-flow once-through water vaporizer for application to resistojet thrusters was evaluated as an element of a laboratory model thruster and tested to investigate its operating characteristics. The vaporizer design concept employs flow swirling to attach the liquid flow to the boiler chamber wall, providing for separation of the two liquid phases. This vaporizer was modified with a nozzle and a centrally-located heater to facilitatite vaporization, superheating, and expansion of the propellant, allowing it to function as a resistojet. Performance was measured at thrust levels ranging from 170 to 360 mN and at power levels ranging from 443 to 192 W. Maximum measured specific impulse was 192 sec.

Morren, W. Earl↗
NASA NTRS1990

Cobalt and nickel concentrations in the 'komatiite component' of Apollo 16 polymict samples

Some estimates for the concentrations of Co and Ni in the primitive mafic component of Apollo 16 breccias and soils are large, comparable to concentrations in terrestrial komatiites. These estimates may be erroneously high because the contribution from meteoritic contamination of the samples has been underestimated. However, even if the correction for meteoritic Co and Ni is valid and the calculated residual Ni is not of meteoritic origin, the Ni is presently carried by Fe-Ni metal while the Fe and Mg are carried by mafic silicates. If any large-scale separation of metal and silicate phases has occurred, the concentration ratio of Ni to Fe + Mg in the mafic silicates of the ancient crust in the vicinity of the Apollo 16 site has not been preserved by Apollo 16 rocks. Apollo 16 polymict breccias and soils contain much higher concentrations of siderophile elements and Fe-Ni metal than other nonmare samples from the Moon. Thus, it is likely that the Ni/(Mg + Fe) ratio estimated for the komatiite component from Apollo 16 samples is high compared to the actual ratio for the lunar crust.

Korotev, Randy L.↗
NASA NTRS1991

Adaptive optics and interferometry

Adaptive optics and interferometry, two techniques that will improve the limiting resolution of optical and infrared observations by factors of tens or even thousands, are discussed. The real-time adjustment of optical surfaces to compensate for wavefront distortions will improve image quality and increase sensitivity. The phased operation of multiple telescopes separated by large distances will make it possible to achieve very high angular resolution and precise positional measurements. Infrared and optical interferometers that will manipulate light beams and measure interference directly are considered. Angular resolutions of single telescopes will be limited to around 10 milliarcseconds even using the adaptive optics techniques. Interferometry would surpass this limit by a factor of 100 or more. Future telescope arrays with 100-m baselines (resolution of 2.5 milliarcseconds at a 1-micron wavelength) are also discussed.

Beichman, Charles A.↗
NASA NTRS1992

A numerical model for atomization-spray coupling in liquid rocket thrust chambers

The physical process of atomization is an important consideration in the stable operation of liquid rocket engines. Many spray combustion computational fluid dynamics (CFD) codes do not include an atomization sub-model but assume arbitrary drop size distributions, drop initial locations, and velocities. A method of coupling an atomization model with the spray model in a REFLEQS CFD code is presented. This method is based on a jet-embedding technique in which the equations governing the liquid jet core are solved separately using the surrounding gas phase conditions. The droplet initial conditions are calculated using a stability analysis appropriate for the atomization regime of liquid jet break-up. This novel coupling model is used to analyze the SSME fuel preburner single injector flow. Results of the diffusion flame characteristics in a single injection element will be presented. The effect of relative velocity, mixture ratio and droplet initial conditions will be shown. The predictions of present atomization model is compared with that of the widely used CICM correlation. The results are also compared with the predictions of volume-of-fluid method.

M. G. Giridharan↗
NASA NTRS1994

Wideband Linear Phase Modulator

Phase modulator for transmission in X band provides large phase deviation that remains nearly linear with voltage over relatively wide range. Operates with low loss over wide frequency band and with stable characteristics over wide temperature range. Phase modulator contains two varactor-diode phase shifters coupled via circulators. Separate drive circuit applies modulating voltages to varactor diodes. Modulation voltages vary in accordance with input to drive circuit.

Mysoor, Narayan R.↗
NASA NTRS1986

C.A.D. representation of ternary and quaternary phase diagrams

This work is concerned with the utilization of C.A.D. solid-modeling software for the computer representation of three-dimensional phase diagrams. The work was undertaken in two parts. First, the C.A.D. software (I-DEAS, by Structural Dynamics Research Corp.) was integrated with a variety of auxiliary Fortran 77 and I-DEAS language programs which were written specifically for the purpose of phase diagram representation. The capabilities of the resulting suite of software for three-dimensional phase diagram representation were developed and illustrated by the construction, display and manipulation of solid-model phase diagrams for a hypothetical quaternary eutectic system. The results of this work are discussed in some detail in the attached publication ('Solid-modeling: a C.A.D. Alternative for Three-dimensional Phase Diagram Representation'). Such a technique is of general applicability, having utility in both research and education. Secondly, using the C.A.D. technique, data from the literature (gleaned from some 70 separate publications), which represent experimentally determined phase boundaries, were combined to form solid-model representations of the CMS2-M2S-S ternary space diagram and the CMS2-CAS2-M2S-S quaternary liquidus projection (where C=CaO, M=MgO, A=Al2O3, and S=SiO2). These diagrams were utilized in a concurrent study of solidification in the CMAS system.

Delao, James D.↗
NASA NTRS1994

Rotational excitation of H2 in collision with H

Rate coefficients for the reactive processes of ortho-para conversion in which the j = 0 rotational level of molecular hydrogen is excited to the j = 1 and j = 3 level by impacts with hydrogen atoms are calculated for temperatures between 30 K and 1000 K using a fully converged complete close-coupled method. Rate coefficients are also obtained for the excitation from the j = 0 to the j = 2 rotational level and from the j = 1 to the j = 3 rotational level. The interference between the direct and reactive channels is taken into account as is the geometric phase resulting from the adiabatic separation of electronic and nuclear motion that generates the potential energy surface. Convenient analytic representations of the rate coefficients are presented.

Sun, Y.↗
NASA NTRS1983

Stability and Interaction of Coherent Structure in Supersonic Reactive Wakes

A theoretical formulation and analysis is presented for a study of the stability and interaction of coherent structure in reacting free shear layers. The physical problem under investigation is a premixed hydrogen-oxygen reacting shear layer in the wake of a thin flat plate. The coherent structure is modeled as a periodic disturbance and its stability is determined by the application of linearized hydrodynamic stability theory which results in a generalized eigenvalue problem for reactive flows. Detailed stability analysis of the reactive wake for neutral, symmetrical and antisymmetrical disturbance is presented. Reactive stability criteria is shown to be quite different from classical non-reactive stability. The interaction between the mean flow, coherent structure and fine-scale turbulence is theoretically formulated using the von-Kaman integral technique. Both time-averaging and conditional phase averaging are necessary to separate the three types of motion. The resulting integro-differential equations can then be solved subject to initial conditions with appropriate shape functions. In the laminar flow transition region of interest, the spatial interaction between the mean motion and coherent structure is calculated for both non-reactive and reactive conditions and compared with experimental data wherever available. The fine-scale turbulent motion determined by the application of integral analysis to the fluctuation equations. Since at present this turbulence model is still untested, turbulence is modeled in the interaction problem by a simple algebraic eddy viscosity model. The applicability of the integral turbulence model formulated here is studied parametrically by integrating these equations for the simple case of self-similar mean motion with assumed shape functions. The effect of the motion of the coherent structure is studied and very good agreement is obtained with previous experimental and theoretical works for non-reactive flow. For the reactive case, lack of experimental data made direct comparison difficult. It was determined that the growth rate of the disturbance amplitude is lower for reactive case. The results indicate that the reactive flow stability is in qualitative agreement with experimental observation.

Menon, Suresh↗
NASA NTRS1997

Solar Cycle Predictions Near Sunspot Minimum

Observations of solar magnetic activity and the dynamics of the solar convection zone have produced severe constraints on models of the Sun's magnetic dynamo. These constraints are so severe that, at present, we do not have numerical models that can accept the current conditions and then march forward in time to predict future activity. Given this state of solar dynamo theory we are forced to examine previous behavior to discover patterns and trends that afford us some measure of predictability. Here we examine the behavior of several indicators of solar activity near solar minimum that are well correlated with the amplitude of the following solar maximum to predict the level of solar activity over cycle 23. Sunspot numbers, areas, and positions are useful for characterizing solar cycle behavior due to the extent of the data (12 cycles or more). These data exhibit several patterns that relate future activity to past behavior. With the Odd-Even effect the odd numbered cycles have been larger than their even numbered predecessors for each of the last six cycle pairs. With the Amplitude-Period effect short period cycles have been followed by large amplitude cycles and long period cycles have been followed by small amplitude cycles for 10 of the last 13 cycles. With the Maximum-Minimum effect the sunspot number at minimum is directly correlated with the sunspot number at maximum for a given cycle. The geomagnetic indices aa and Ap are also related to solar activity by the connections between disturbances in the solar wind and variations in the Earth's magnetic field. Like the Maximum-Minimum effect for sunspots, the size of the aa and Ap indices at minimum are directly related to the amplitude of the following maximum. The number of geomagnetically disturbed days (days with Ap >= 25) over the course of a cycle is another indicator for the size of the next cycle. The aa and Ap indices can each be separated into a component in phase with the current sunspot cycle and an "extended cycle" component that is directly related to the following cycle. Individually each of these indicators provides some measure of predictive ability for the amplitudes of previous cycles. Taken in combination we find that the predictions are much more accurate. Our multi-variate analysis indicates that a maximum sunspot number of 160 +/- 20 should occur near the end of 1999 for cycle 23.

Hathaway, David H.↗
NASA NTRS1999

Tracking the Relative Motion of Four Space Payloads Launched from a Sub-Orbital NASA Rocket

One problem, which is comparatively new in the field of GPS applications, is the determination of the relative trajectories of space vehicles. Applications include the docking of spacecraft, collision avoidance in the area of space stations, and trajectory reconstruction of multiple payloads. The required precision in any of these applications will vary, according to the requirements of the task and abilities of GPS to cope with the environment and the dynamics. This paper describes the post-mission reconstruction of the relative trajectories of four GPS receivers attached to four payloads jettisoned from a Black Brant XII rocket. This vehicle was launched by the National Aeronautics and Space Administration (NASA) in January 1999 from the Poker Flats Research Range near Fairbanks, Alaska. The Black Brant XII is a sub-orbital rocket designed to carry payloads of 100 to 500 kg into the upper atmosphere. Flight time is generally in the order of 10-20 minutes. In this experiment, a GPS receiver and antenna was attached to each of the four payloads. One of the GPS receivers was assigned as the "base station", while the other 3 receivers were designated as remotes. GPS time, code and phase measurements were telemetered to a ground station for real-time processing and storage. The object of the mission was to re-compute the position and velocity of the remote units with respect to the base station during the launch phase and after the payloads separated. During the launch segment the 3 baseling distances between the 4 antennas are known from plans and are constant values until each payload is released. On the fly ambiguity determination was used to establish local coordinates from the base antenna to each of the other 3 GPS units during flight. Distance computations were made from the GPS-derived coordinates and compared to plan distances. Using this methodology an error analysis of the relative GPS accuracies has been presented and in addition a description given of the respective payload behaviour following separation from the vehicle.

Martell, Hugh↗
NASA NTRS2000

A semiempirical study for the ground and excited states of free-base and zinc porphyrin-fullerene dyads

The ground and excited states of a covalently linked porphyrin-fullerene dyad in both its free-base and zinc forms (D. Kuciauskas et al., J. Phys. Chem. 100 (1996) 15926) have been investigated by semiempirical methods. The excited-state properties are discussed by investigation of the character of the molecular orbitals. All frontier MOs are mainly localized on either the donor or the acceptor subunit. Thus, the absorption spectra of both systems are best described as the sum of the spectra of the single components. The experimentally observed spectra are well reproduced by the theoretical computations. Both molecules undergo efficient electron transfer in polar but not in apolar solvents. This experimental finding is explained theoretically by explicitly considering solvent effects. The tenth excited state in the gas phase is of charge-separated character where an electron is transferred from the porphyrin donor to the fullerene acceptor subunit. This state is stabilized in energy in polar solvents due to its large formal dipole moment. The stabilization energy for an apolar environment such as benzene is not sufficient to lower this state to become the first excited singlet state. Thus, no electron transfer is observed, in agreement with experiment. In a polar environment such as acetonitrile, the charge-separated state becomes the S, state and electron transfer takes place, as observed experimentally. The flexible single bond connecting both the donor and acceptor subunits allows free rotation by ca. +/- 30 degrees about the optimized ground-state conformation. For the charge-separated state this optimized geometry has a maximum dipole moment. The geometry of the charge-separated state thus does not change relatively to the ground-state conformation. The electron-donating properties of porphyrin are enhanced in the zinc derivative due to a reduced porphyrin HOMO-LUMO energy gap. This yields a lower energy for the charge-separated state compared to the free-base dyad.

Bridged Compounds/chemistry↗
NASA NTRS1994

Algorithms for Unequal-Arm Michelson Interferometers

A method of data acquisition and data analysis is described in which the performance of Michelson-type interferometers with unequal arms can be made nearly the same as interferometers with equal arms. The method requires a separate readout of the relative phase in each arm, made by interfering the returning beam in each arm with a fraction of the outgoing beam.

Michelson Interferometer↗
NASA NTRS2005

New Approach for Thermal Protection System of a Probe During Entry

One of the biggest challenges for any thermal protection system (TPS) of a probe is to provide a sufficient barrier for heat generated during descent in order to keep the temperature inside of the probe low enough to support operational temperature of equipment. Typically, such a goal is achieved by having the ceramic tiles and blankets like on the Space Shuttle, silicon based ablators, or metallic systems to cover the probe external surface. This paper discusses the development of an innovative technique for TPS of the probe. It is proposed to use a novel TPS which comprises thermal management of the entry vehicle. It includes: a) absorption of the heat during heat pick load by a Phase Change Material (PCM), b) separation of the compartment which contains PCM from the rest of the space vehicle by a gap with a high thermal resistance, c) maintaining temperature of the internal wall of s/c cabin temperature by transfer heat from the internal wall to the "cold" side of the vehicle and to reject heat into the space during the flight and on a ground, d) utilization of an advanced heat pipe, so called Loop Heat Pipe to transfer heat from the cabin internal wall to the cold side of the s/c and to reject the heat into environment outside of the vehicle. A Loop Heat Pipe is capable of transferring heat against gravity

Yendler, Boris↗
NASA NTRS2011

The Vertical Distribution of Thin Features Over the Arctic Analysed from CALIPSO Observations: Optically Thin Clouds - Part 1

Clouds play a crucial role in the Arctic climate system. Therefore, it is essential to accurately and reliably quantify and understand cloud properties over the Arctic. It is also important to monitor and attribute changes in Arctic clouds. Here, we exploit the capability of the CALIPSO-CALIOP instrument and provide comprehensive statistics of tropospheric thin clouds, otherwise extremely difficult to monitor from passive satellite sensors.We use 4 yr of data (June 2006.May 2010) over the circumpolar Arctic, here defined as 67-82 deg. N, and characterize probability density functions of cloud base and top heights, geometrical thickness and zonal distribution of such cloud layers, separately for water and ice phases, and discuss seasonal variability of these properties. When computed for the entire study area, probability density functions of cloud base and top heights and geometrical thickness peak at 200-400, 1000-2000 and 400-800 m, respectively, for thin water clouds, while for ice clouds they peak at 6-8, 7-9 and 400-1000 m, respectively. In general, liquid clouds were often identified below 2 km during all seasons, whereas ice clouds were sensed throughout the majority of the upper troposphere and also, but to a smaller extent, below 2 km for all seasons.

DeVasthale, Abhay↗
NASA NTRS2011

Temporal and Spatial Aspects of Gas Release During the 2010 Apparition of Comet 103P/Hartley-2

We report measurements of eight primary volatiles (H2O, HCN, CH4, C2H6, CH3OH, C2H2, H2CO, and NH3) and two product species (OH and NH2) in comet 103P/Hartley-2 using high dispersion infrared spectroscopy. We present production rates for individual volatiles species, their mixing ratios relative to water, and their spatial distributions in the coma on multiple dates that span the interval Sept. - Dec. 2010. The production rates vary strongly with nucleus rotation, but the mixing ratios remain constant throughout the campaign. The released primary volatiles exhibit diverse spatial properties which favor the presence of separate polar and apolar ice phases in the nucleus, establish dust and gas release from icy clumps (and also, directly from the nucleus), and provide insights into the driver for the cyanogen (CN) polar jet.

Bonev, B. P.↗