Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter estimation using data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

SU-F-J-158: Respiratory Motion Resolved, Self-Gated 4D-MRI Using Rotating Cartesian K-Space Sampling

Purpose: Dynamic MRI has been used to quantify respiratory motion of abdominal organs in radiation treatment planning. Many existing 4D-MRI methods based on 2D acquisitions suffer from limited slice resolution and additional stitching artifacts when evaluated in 3D{sup 1}. To address these issues, we developed a 4D-MRI (3D dynamic) technique with true 3D k-space encoding and respiratory motion self-gating. Methods: The 3D k-space was acquired using a Rotating Cartesian K-space (ROCK) pattern, where the Cartesian grid was reordered in a quasi-spiral fashion with each spiral arm rotated using golden angle{sup 2}. Each quasi-spiral arm started with the k-space center-line, which were used as self-gating{sup 3} signal for respiratory motion estimation. The acquired k-space data was then binned into 8 respiratory phases and the golden angle ensures a near-uniform k-space sampling in each phase. Finally, dynamic 3D images were reconstructed using the ESPIRiT technique{sup 4}. 4D-MRI was performed on 6 healthy volunteers, using the following parameters (bSSFP, Fat-Sat, TE/TR=2ms/4ms, matrix size=500×350×120, resolution=1×1×1.2mm, TA=5min, 8 respiratory phases). Supplemental 2D real-time images were acquired in 9 different planes. Dynamic locations of the diaphragm dome and left kidney were measured from both 4D and 2D images. The same protocol was also performed on a MRI-compatible motion phantom where the motion was programmed with different amplitude (10–30mm) and frequency (3–10/min). Results: High resolution 4D-MRI were obtained successfully in 5 minutes. Quantitative motion measurements from 4D-MRI agree with the ones from 2D CINE (<5% error). The 4D images are free of the stitching artifacts and their near-isotropic resolution facilitates 3D visualization and segmentation of abdominal organs such as the liver, kidney and pancreas. Conclusion: Our preliminary studies demonstrated a novel ROCK 4D-MRI technique with true 3D k-space encoding and respiratory motion self-gating. The technique leads to high-resolution and artifacts-free 4D images for improved abdominal organ motion studies. K.S acknowledges funding support from NIH R01CA188300.

60 APPLIED LIFE SCIENCES↗

PRIME

SAND2021-0565 O PRIME is a modeling framework designed for the real-time characterization and forecasting of partially observed epidemics. The method is designed to help guide medical resource allocation in the early epoch of the outbreak. Characterization is the estimation of infection spread parameters using daily counts of symptomatic patients. The estimation problem is posed as one of Bayesian inference and solved using a Markov Chain Monte Carlo technique. The framework can accommodate multiple epidemic waves and can help identify different disease dynamics at the regional, state, and country levels. Examples are provided using publicly available COVID-19 data. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Safta, Cosmin↗

Electron Beam Welding and Characterization of 21-6-9 Stainless Steel Annealed Plate and Welds

This report summarizes the electron beam (EB) welding and characterization work performed on annealed 21-6-9 stainless steel plate during the 2011-2012 time period. The work was directed at producing legacy autogeneous EB welds with the use of the Enhanced Modified Faraday Cup (EMFC) EB diagnostic to characterize the beam, and measuring the resulting tensile and hardness properties of the weld relative to annealed 21-6-9 stainless steel base metal. Different tensile bar configurations were produced, and the results were analyzed to determine how well the stress-strain behavior of small tensile samples compares to standard sized tensile samples for the same material. Additional comparisons were made between cross-weld tensile samples with and without weld steps to determine how the unwelded portion of a step joint affects the measured tensile behavior. Base metal tensile data was further used to calibrate a spherical indentation method to estimate uniaxial tensile behavior using a nanoindenter. The calibrated method was then used to generate the first engineering stress-strain curve for EB welded 21-6-9 stainless steel. Additional analysis was performed to determine Steinberg-Guinan and Johnson-Cook model parameters to represent both the annealed 21-6-9 SS base metal and the EB weld metal stress-strain behaviors under quasi static strain rate conditions.

36 MATERIALS SCIENCE↗

Hadron spectrum and infrared-finite behavior of QCD running coupling

We study the behavior of the QCD effective coupling α{sub s} in the low-energy region by exploiting the conventional meson spectrum within a relativistic quantum-field model based on analytical confinement of quarks and gluons. The spectra of quark-antiquark and two-gluon bound states are defined by using a master equation similar to the ladder Bethe-Salpeter equation. A new, independent and specific infrared-finite behavior of QCD coupling is found below energy scale ∼1 GeV. Particularly, an infrared-fixed point is extracted at α{sub s}(0) ≅ 0.757 for confinement scale Λ = 345 MeV. We provide a new analytic estimate of the lowest-state glueball mass. As applications, we also estimate masses of some intermediate and heavy mesons as well as the weak-decay constants of light mesons. By introducing only a minimal set of parameters (the quark masses m{sub f} and Λ) we obtain results in reasonable agreement with recent experimental data in a wide range of energy scale ∼0.1–10 GeV. We demonstrate that global properties of some low-energy phenomena may be explained reasonably in the framework of a simple relativistic quantum-field model if one guesses correct symmetry structure of the quark-gluon interaction in the confinement region and uses simple forms of propagators in the hadronisation regime. The model may serve a reasonable framework to describe simultaneously different sectors in low-energy particle physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Specific absorbed fractions for a revised series of the UF/NCI pediatric reference phantoms: internal photon sources

Assessment of radiation absorbed dose to internal organs of the body from the intake of radionuclides, or in the medical setting through the injection of radiopharmaceuticals, is generally performed based upon reference biokinetic models or patient imaging data, respectively. Biokinetic models estimate the time course of activity localized to source organs. The time-integration of these organ activity profiles are then scaled by the radionuclide S-value, which defines the absorbed dose to a target tissue per nuclear transformation in various source tissues. S-values are computed using established nuclear decay information (particle energies and yields), and a parameter termed the specific absorbed fraction (SAF). The SAF is the ratio of the absorbed fraction—fraction of particle energy emitted in the source tissue that is deposited in the target tissue—and the target organ mass. While values of the SAF may be computed using patient-specific or individual-specific anatomic models, they have been more widely available through the use of computational reference phantoms. In this study, we report on an extensive series of photon SAFs computed in a revised series of the University of Florida and the National Cancer Institute pediatric reference phantoms which have been modified to conform to the specifications embodied in the ICRP reference adult phantoms of Publication 110 (e.g. organs modeled, organ ID numbers, blood contribution to elemental compositions). Following phantom anatomical revisions, photon radiation transport simulations were performed using MCNPX v2.7 in each of the ten phantoms of the series—male and female newborn, 1 year old, 5 year old, 10 year old, and 15 year old—for 60 different tissues serving as source and/or target regions. A total of 25 photon energies were considered from 10 keV to 10 MeV along a logarithm energy grid. Detailed analyses were conducted of the relative statistical errors in the Monte Carlo target tissue energy deposition tallies at low photon energies and over all energies for source–target combinations at large intra-organ separation distances. Based on these analyses, various data smoothing algorithms were employed, including multi-point weighted data smoothing, and log–log interpolation at low energies (1 keV and 5 keV) using limiting SAF values based upon target organ mass to bound the interpolation interval. The final dataset is provided in a series of ten electronic supplemental files in MS Excel format. Finally, the results of this study were further used as the basis for assessing the radiative component of internal electron source SAFs as described in our companion paper (Schwarz et al 2021) for this same pediatric phantom series.

61 RADIATION PROTECTION AND DOSIMETRY↗

Specific absorbed fractions for a revised series of the UF/NCI pediatric reference phantoms: internal electron sources

Assessment of radiation absorbed dose to internal organs of the body from the intake of radionuclides, or in the medical setting through the injection of radiopharmaceuticals, is generally performed based upon reference biokinetic models or patient imaging data, respectively. Biokinetic models estimate the time course of activity localized to source organs. The time-integration of these organ activity profiles are then scaled by the radionuclide S-value, which defines the absorbed dose to a target tissue per nuclear transformation in various source tissues. S-values are computed using established nuclear decay information (particle energies and yields), and a parameter termed the specific absorbed fraction (SAF). The SAF is the ratio of the absorbed fraction—fraction of particle energy emitted in the source tissue that is deposited in the target tissue—and the target organ mass. While values of the SAF may be computed using patient-specific or individual-specific anatomic models, they have been more widely available through the use of computational reference phantoms. In this study, we report on an extensive series of photon SAFs computed in a revised series of the University of Florida and the National Cancer Institute pediatric reference phantoms which have been modified to conform to the specifications embodied in the ICRP reference adult phantoms of Publication 110 (e.g. organs modeled, organ ID numbers, blood contribution to elemental compositions). Following phantom anatomical revisions, photon radiation transport simulations were performed using MCNPX v2.7 in each of the ten phantoms of the series—male and female newborn, 1 year old, 5 year old, 10 year old, and 15 year old—for 60 different tissues serving as source and/or target regions. A total of 25 photon energies were considered from 10 keV to 10 MeV along a logarithm energy grid. Detailed analyses were conducted of the relative statistical errors in the Monte Carlo target tissue energy deposition tallies at low photon energies and over all energies for source–target combinations at large intra-organ separation distances. Based on these analyses, various data smoothing algorithms were employed, including multi-point weighted data smoothing, and log–log interpolation at low energies (1 keV and 5 keV) using limiting SAF values based upon target organ mass to bound the interpolation interval. The final dataset is provided in a series of ten electronic supplemental files in MS Excel format. Finally, the results of this study were further used as the basis for assessing the radiative component of internal electron source SAFs as described in our companion paper (Schwarz et al 2021) for this same pediatric phantom series.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Methodology for Estimating Purchased Prices of Energy-efficient Motors Internationally and Results for Selected Countries

Motor-driven systems accounts for approximately 60% of manufacturing final electricity use worldwide. Setting standards and designing policies to increase the energy efficiency of the electric motor stocks in a country is a complex process that requires substantial amount of data and analysis. One of the key data needed for this purpose is the purchase price of electric motors in local market conditions. This study was conducted to develop a bottom-up approach to estimate the purchase price of electric motors in different countries/regions for different sizes, number of poles, enclosures, and efficiency levels by adjusting a recent analysis from the U.S to local parameters. The methodology allows for estimates of manufacturer selling prices, along with other costs associated with the distribution channel to calculate purchase prices for different efficiency levels, in different economies. In this report, we provide preliminary results for selected countries/regions in order to illustrate the possible applications of our analysis. Despite the uncertainties due to specific market conditions, this approach can be used by analysts, industry experts, policy makers, and other interested parties to have a more systematic way to estimate the purchase price of electric motors at the country level and use such prices in cost-benefit analyses and cost-effectiveness of higher energy efficiency standards for electric motors.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Large-Scale, High-Resolution Hydrological Model Parameter Data Set for Climate Change Impact Assessment for the Conterminous US

To extend geographical coverage, refine spatial resolution, and improve modeling efficiency, a computation- and data-intensive effort was conducted to organize a comprehensive hydrologic dataset with post-calibrated model parameters for hydro-climate impact assessment. Several key inputs for hydrologic simulation—including meteorologic forcings, soil, land class, vegetation, and elevation—were collected from multiple best-available data sources and organized for 2107 hydrologic subbasins (8-digit hydrologic units, HUC8s) in the conterminous United States at refined 1/24° (~4 km) spatial resolution. Using high-performance computing for intensive model calibration, a high-resolution parameter dataset was prepared for the macro-scale Variable Infiltration Capacity (VIC) hydrologic model. The VIC simulation was driven by DAYMET daily meteorological forcing and was calibrated against USGS WaterWatch monthly runoff observations for each HUC8. The results showed that this new parameter dataset may help reasonably simulate runoff at most US HUC8 subbasins. Based on this exhaustive calibration effort, it is now possible to accurately estimate the resources required for further model improvement across the entire conterminous United States. We anticipate that through this hydrologic parameter dataset, the repeated effort of fundamental data processing can be lessened, so that research efforts can emphasize the more challenging task of assessing climate change impacts. The pre-organized model parameter dataset will be provided to interested parties to support further hydro-climate impact assessment.

Oubeidillah, Abdoul A.↗

An Efficient Bayesian Method for Advancing the Application of Deep Learning in Earth Science

Despite their wide and successful applications, deep learning (DL) models are prone to overfitting for small training datasets, produce a poor predictive performance for uncertain data, and provide point estimations without any indication of the accuracy and credibility. These limitations of the deterministic DL models hinder their effective application in Earth system science where the labelled data are sparse, noisy and incomplete with large uncertainty and where the predictive uncertainty quantification is needed for scientific understanding and policy decision making. Integration of Bayesian inference into DL models adds an estimate of uncertainty and regularization in the predictions. However, traditional Bayesian methods are computationally unaffordable and inflexible for high-dimensional problems, which limits their application to DL systems that typically have millions of model parameters. In this effort, we propose an efficient and general-purpose Bayesian inference method to advance DL model optimization and uncertainty quantification, so as to facilitate the adoption of DL in Earth sciences. In a demonstration, we integrate the proposed Bayesian method with a feedforward neural network (NN) to build a fast-to-evaluate surrogate of the complex Energy Exascale Earth System Land Model for efficient modeling. The formulated Bayesian NN, using a small number of training data, produces an accurate prediction with high credibility, whereas with the same small training size, the deterministic NN cannot yield a reasonable estimation and does not provide confidence information. The proposed Bayesian method is computationally efficient and flexible, capable of integration with diverse network variants such as convolutional NNs and recurrent NNs to advance the application of DL in Earth sciences.

Lu, Dan↗

Simplified Model and Approach to Transform Infrared Surface Temperature to Film Effectiveness in a Conjugate Heat Transfer Experiment

In the pursuit of more efficient gas turbines, film cooling is a critical technology. This article describes a simplified engineering model based on a one-dimensional thermal resistance network. The model is used to relate film-cooling effectiveness and heat transfer augmentation to local overall cooling effectiveness in a conjugate flat plate experiment. Here, this article presents experimental proof-of-concept data to demonstrate the potential for this model. In contrast to previous approaches, neither the wall heat flux nor the adiabatic wall temperature is required to estimate the local film-cooling performance parameters. The model predicts surface temperatures that are within the experimental uncertainties over the range for which the model is trained and to within five percent when the model is extrapolated to higher coolant channel Reynolds numbers. This article is relevant to conjugate test rigs that can measure the hot-surface temperature distribution with and without film cooling. This information may also be relevant to designers as a method to approximate surface temperatures or used as an approximate heat transfer model for optimization studies.

advanced turbines↗

Simplified Model and Approach to Transform Infrared Surface Temperature to Film Effectiveness in a Conjugate Heat Transfer Experiment

This paper describes a simplified engineering model based on a one-dimensional thermal resistance network. The model is used to develop a new method to relate film cooling effectiveness and heat transfer augmentation to local overall cooling effectiveness in a conjugate flat plate experiment. This paper presents experimental proof-of-concept data to demonstrate the potential for this model. In contrast to previous approaches, neither the wall heat flux nor the adiabatic wall temperature is required to estimate the local film cooling performance parameters. The model predicts surface temperatures that are within the experimental uncertainties over the range for which the model is trained, and to within five percent when the model is extrapolated to higher coolant channel Reynolds numbers. This paper is relevant to conjugate test rigs that can measure the hot surface temperature distribution with and without film cooling. This information may also be relevant to designers as a method to approximate surface temperatures or used as an approximate heat transfer model for optimization studies.

advanced gas turbines↗

A Poisson method application to the assessment of the earthquake hazard in the North Anatolian Fault Zone, Turkey

North Anatolian Fault (NAF) is one from the most important strike-slip fault zones in the world and located among regions in the highest seismic activity. The NAFZ observed very large earthquakes from the past to present. The aim of this study; the important parameters of Gutenberg-Richter relationship (a and b values) estimated and this parameters taking into account, earthquakes were examined in the between years 1900-2015 for 10 different seismic source regions in the NAFZ. After that estimated occurrence probabilities and return periods of occurring earthquakes in fault zone in the next years, and is being assessed with Poisson method the earthquake hazard of the NAFZ. The Region 2 were observed the largest earthquakes for the only historical period and hasn’t been observed large earthquake for the instrumental period in this region. Two historical earthquakes (1766, M{sub S}=7.3 and 1897, M{sub S}=7.0) are included for Region 2 (Marmara Region) where a large earthquake is expected in the next years. The 10 different seismic source regions are determined the relationships between the cumulative number-magnitude which estimated a and b parameters with the equation of LogN=a-bM in the Gutenberg-Richter. A homogenous earthquake catalog for M{sub S} magnitude which is equal or larger than 4.0 is used for the time period between 1900 and 2015. The database of catalog used in the study has been created from International Seismological Center (ISC) and Boğazici University Kandilli observation and earthquake research institute (KOERI). The earthquake data were obtained until from 1900 to 1974 from KOERI and ISC until from 1974 to 2015 from KOERI. The probabilities of the earthquake occurring are estimated for the next 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 years in the 10 different seismic source regions. The highest earthquake occur probabilities in 10 different seismic source regions in the next years estimated that the region Tokat-Erzincan (Region 9) %99 with an earthquake occur probability for magnitude 6.5 which the return period 24.7 year, %92 with an earthquake occur probability for magnitude 7 which the return period 39.1 year, %80 with an earthquake occur probability for magnitude 7.5 which the return period 62.1 year, %64 with an earthquake occur probability for magnitude 8 which the return period 98.5 year. For the Marmara Region (Region 2) in the next 100 year estimated that %89 with an earthquake occur probability for magnitude 6 which the return period 44.9 year, %45 with an earthquake occur probability for magnitude 6.5 which the return period 87 year, %45 with an earthquake occur probability for magnitude 7 which the return period 168.6 year.

58 GEOSCIENCES↗

Predicting Nanoparticle Suspension Viscoelasticity for Multimaterial 3D Printing of Silica–Titania Glass

A lack of predictive methodology is frequently a major bottleneck in materials development for additive manufacturing. Hence, exploration of new printable materials often relies on the serendipity of trial and error approaches, which is time-consuming, labor-intensive, and costly. In this paper, we present an approach to overcome these issues by quantifying and controlling the viscoelasticity of inks for multimaterial 3D printing of silica–titania glass using direct ink writing (DIW). We formulate simple silica and silica–titania inks from a suspension of fumed silica nanoparticles in an organic solvent with a dissolved molecular titania precursor. We use a small set of experimental rheological data and estimates of interaction potentials from colloidal theory to develop a predictive tool that allows us to design and obtain compatible inks that are matched both in desired rheological properties (viscosity profiles and elastic modulus) as well as solids loading. The model incorporates silica particle volume fraction, particle size, particle size distribution, and titania precursor concentration, and captures the effects of all formulation parameters on the measured viscoelasticity in a single curve. We validate the ink formulations predicted by the model and find that the materials can be very well matched in rheological properties as desired for 3D printing. Using the DIW and heat treatment methods we have reported previously, we use these inks to print and process a fully transparent glass with spatial change in dopant composition and refractive index. Finally, we believe that this approach can be extended to other colloidal systems and allow predictive ink formulation design for desired printability in direct ink write manufacturing.

36 MATERIALS SCIENCE↗

Neural network-based single material beam-hardening correction for X-ray CT in Additive Manufacturing

Beam-hardening (BH) artifacts are ubiquitous in X-ray CT scans of dense metal additively manufactured (AM) parts. While linearization approaches are useful for correcting beam-hardened data from single material objects, they either require a calibration scan or detailed system and material composition information. In this paper, we introduce a neural network-based, material-agnostic method to correct beam-hardening artifacts. We train a neural network to map the acquired beam-hardened projection values and the corresponding estimated thickness of the part based on an initial segmentation to beam-hardening related parameters, which can be used to compute the coefficients of a linearizing correction polynomial. A key strength of our approach is that, once the network is trained, it can be used for correcting beam hardening from a variety of materials without any calibration scans or detailed system and material composition information. Furthermore, our method is robust to errors in the estimated thickness due to the typical challenge of obtaining an accurate initial segmentation from reconstructions impacted by BH artifacts. We demonstrate the utility of our method to obtain high-quality CT reconstructions from a collection of AM parts -- suppressing cupping and streaking artifacts

Rahman, Obaid↗

Artificial neural networks estimate evapotranspiration for Miscanthus × giganteus as effectively as empirical model but with fewer inputs

Estimating actual evapotranspiration (ET) is particularly crucial for addressing how vegetation affects the water balance of ecosystems. ET estimation can be complex with empirical models due to their many parameters and reliance on aridity. In contrast, artificial neural networks (ANNs) could potentially estimate ET with fewer and more common meteorological parameters. In this study, we trained two ANNs, one using a feed-forward approach (FFN) and the other a nonlinear auto-regressive network (NARX), to predict ET and compared them to the commonly used empirical model Granger and Gray (GG). We trained our models on a nine-year eddy covariance (EC) dataset for Miscanthu s × giganteus ( M . × giganteus ) from Illinois (UIEF), then tested them using out-of-sample data from both UIEF and a different location in Iowa (SABR) to compare the accuracy of FFN, NARX, and GG models in estimating daily ET. A combination of air temperature (T a ) and solar radiation (R s ) was chosen as inputs due to the highest R 2 for FFN (R 2 = 0.79, 0.81, and 0.79 for training, testing, and validation, respectively) and only T a for NARX (R 2 = 0.70 for out-of-sample validation). The predictive power of the FFN model was superior to the NARX and GG models at the UIEF site (R 2 = 0.84, 0.70, and 0.83 for out-of-sample validation, respectively). Our analysis showed that ANN approaches are as accurate as empirical approaches for estimating ET but use fewer inputs.

54 ENVIRONMENTAL SCIENCES↗

Quantum-Inspired Bayesian Sampling for Uncertainty Quantification and Machine Learning (Final Technical Report)

With increasing simulation and measurement data, machine learning and artificial intelligence have been widely used in computational decision-making of complex engineering systems. The resulting tools, such as uncertainty quantification solvers, reinforcement learning, and physics-informed machine learning, have achieved great success in critical DOE tasks such as material discovery and design, energy system modeling and control, and numerical weather and climate prediction. A core topic in scientific machine learning and artificial intelligence is Bayesian inference: given an observed data set, people want to estimate the posterior distribution of a (possibly large) number of hidden parameters. Due to the flexibility and weak assumptions, Bayesian sampling has been the mainstream Bayesian inference solvers despite the rapid progress of approximate Bayesian inference. Classical Bayesian sampling methods such as Markov-chain Monte Carlo suffer from a low-acceptance rate due to the random walk nature, therefore state-of-the-art techniques use Hamiltonian Monte Carlo and its variants to efficiently draw posterior samples in a high dimension. The key idea of Hamiltonian Monte Carlo and its variants is to simulate the Hamiltonian dynamics of a classical particle with a fixed mass, and their performance significantly degrades when the posterior distribution is highly spiky or has multiple modes. Leveraging the idea of quantum physics, this project has investigated new theory, algorithms and applications of Bayesian inference (especially Bayesian sampling). The main results include: (1) novel quantum-inspired Bayesian sampling methods that can lead to better accuracy for challenging multi-modal or spiky distributions, (2) more scalable machine learning framework leveraging tensor-compressed Bayesian inference, and (3) Bayesian and sampling approaches for verifying the robustness of continuous and binary neural networks.

97 MATHEMATICS AND COMPUTING↗

On Degeneracies in Retrievals of Exoplanetary Transmission Spectra

Accurate estimations of atmospheric properties of exoplanets from transmission spectra require the understanding of degeneracies between model parameters and observations that can resolve them. We conduct a systematic investigation of such degeneracies using a combination of detailed atmospheric retrievals and a range of model assumptions, focusing on H{sub 2}-rich atmospheres. As a case study, we consider the well-studied hot Jupiter HD 209458 b. We perform extensive retrievals with models ranging from simple isothermal and isobaric atmospheres to those with full pressure–temperature profiles, inhomogeneous cloud/haze coverage, multiple-molecular species, and data in the optical–infrared wavelengths. Our study reveals four key insights. First, we find that a combination of models with minimal assumptions and broadband transmission spectra with current facilities allows precise estimates of chemical abundances. In particular, high-precision optical and infrared spectra, along with models including variable cloud coverage and prominent opacity sources, with Na and K being important in the optical, provide joint constraints on cloud/haze properties and chemical abundances. Second, we show that the degeneracy between planetary radius and its reference pressure is well characterized and has little effect on abundance estimates, contrary to previous claims using semi-analytic models. Third, collision-induced absorption due to H{sub 2}–H{sub 2} and H{sub 2}–He interactions plays a critical role in correctly estimating atmospheric abundances. Finally, our results highlight the inadequacy of simplified semi-analytic models with isobaric assumptions for reliable retrievals of transmission spectra. Transmission spectra obtained with current facilities such as the Hubble Space Telescope and Very Large Telescope can provide strong constraints on atmospheric abundances of exoplanets.

79 ASTRONOMY AND ASTROPHYSICS↗

A method for the estimation of the enthalpy of formation of mixed oxides in Al{sub 2}O{sub 3}-Ln{sub 2}O{sub 3} systems

A new method is proposed for the estimation of the enthalpy of formation (DELTA{sub ox}H) of various Al{sub 2}O{sub 3}-Ln{sub 2}O{sub 3} mixed oxides from the constituent binary oxides. Our method is based on Pauling's concept of electronegativity and, in particular, on the relation between the enthalpy of formation of a binary oxide and the difference between the electronegativities of the oxide-forming element and oxygen. This relation is extended to mixed oxides with a simple formula given for the calculation of DELTA{sub ox}H. The parameters of this equation were fitted using published experimental values of DELTA{sub ox}H derived from high-temperature oxide melt solution calorimetry. Using our proposed method, we obtained a standard deviation (sigma) of 4.87 kJ mol{sup -1} for this data set. Taking into account regularities within the lanthanide series, we then estimated the DELTA{sub ox}H values for Al{sub 2}O{sub 3}-Ln{sub 2}O{sub 3} mixed oxides. The values estimated using our method were compared with those obtained by Aronson's and Zhuang's empirical methods, both of which give significantly poorer results. - Graphical abstract: Enthalpy of formation of Ln-Al-O oxides from the constituent binary ones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗