Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE ANGLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

XRISM/Resolve view of Abell 2319: Turbulence, sloshing, and ICM dynamics

Here, we present results from XRISM/Resolve observations of the core of the galaxy cluster Abell 2319, focusing on its kinematic properties. The intracluster medium (ICM) exhibits temperatures of approximately 8 keV across the core, with a prominent cold front and a high-temperature region (⁠~11 keV) in the north-west. The average gas velocity in the 3' x 4' region around the brightest cluster galaxy (BCG) covered by two Resolve pointings is consistent with that of the BCG to within 40 km s -1 ⁠ and we found modest average velocity dispersion of 230–250 km s -1 ⁠. On the other hand, spatially resolved spectroscopy reveals interesting variations. A blueshift of up to ~230 km s -1 ⁠ is observed around the east edge of the cold front, where the gas with the lowest specific entropy is found. The region further south inside the cold front shows only a small velocity difference from the BCG; however, its velocity dispersion is enhanced to ~400 km s -1 ⁠, implying the development of turbulence. These characteristics indicate that we are observing sloshing motion with some inclination angle following BCG and that gas phases with different specific entropy participate in sloshing with their own velocities, as expected from simulations. No significant evidence for a high-redshift ICM component associated with the subcluster Abell 2319B was found in the region covered by the current Resolve pointings. These results highlight the importance of sloshing and turbulence in shaping the internal structure of Abell 2319. Further deep observations are necessary to better understand the mixing and turbulent processes within the cluster.

Astronomy and AstroPhysics↗

Controlling Deformation in Al/Ti: How Interface Roughness and Orientation Drive Bimetal Mechanics

The microstructural characteristics and morphology of interfaces in metals can be crucial in governing the initiation of plasticity and early deformation mechanisms under extreme conditions. During high-strain-rate deformation, these interfaces significantly affect dislocation nucleation, twinning, and other mechanisms that directly impact material strength and failure. Despite their importance, a substantial knowledge gap remains between the observed macroscopic material behavior and the underlying role of bimetal interfaces in plasticity initiation. Here, to address this gap, large-scale molecular dynamics simulations are performed on Al/Ti bimetal structures to examine the effect of interface characteristics on the onset of plasticity under uniaxial compression. Specifically, this study investigates how interface roughness (flat vs waveform interfaces) modifies the initiation of plastic events in the microstructure. Atomistic simulations indicate that interface roughness (a microscopic behavior) reduces the stress required for dislocation nucleation, thereby reducing the peak stress relative to a flat interface. For the square interface, the step height strongly influences plasticity initiation by setting the separation of locally flat regions. Varying the interface rotation relative to the loading direction (macroscopic behavior) reveals that the peak stress for both flat and waveform interfaces initially decreases and then increases with rotation, accompanied by a shift in dominant mechanisms—from Al twinning (flat) to interface sliding and Ti-dominated phase transformation and twinning at lower angles. The change in the stress-strain slope during initial compression reflects how rotation alters the resolved shear stress and activates different slip systems. Overall, the study provides valuable insights into the role of bimetal interfaces in controlling plasticity initiation and early deformation pathways for Al/Ti under extreme loading conditions.

36 MATERIALS SCIENCE↗

Triminimal parametrization of quark mixing matrix

Starting from a new zeroth order basis for quark mixing (CKM) matrix based on the quark-lepton complementarity and the tribimaximal pattern of lepton mixing, we derive a triminimal parametrization of a CKM matrix with three small angles and a CP-violating phase as its parameters. This new triminimal parametrization has the merits of fast convergence and simplicity in application. With the quark-lepton complementary relations, we derive relations between the two unified triminimal parametrizations for quark mixing obtained in this work and for lepton mixing obtained by Pakvasa-Rodejohann-Weiler. Parametrization deviating from quark-lepton complementarity is also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Entanglement, Nonlinear Dynamics, and the Heisenberg Limit

We show that quantum Fisher information provides a sufficient condition to recognize multiparticle entanglement in an N qubit state. The same criterion gives a necessary and sufficient condition for sub-shot-noise phase sensitivity in the estimation of a collective rotation angle {theta}. The analysis therefore singles out the class of entangled states which are useful to overcome classical phase sensitivity in metrology and sensors. We finally study the creation of useful entangled states by the nonlinear dynamical evolution of two decoupled Bose-Einstein condensates or trapped ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Valley-Tunable Even-Denominator Fractional Quantum Hall State in the Lowest Landau Level of an Anisotropic System

Fractional quantum Hall states (FQHSs) at even-denominator Landau level filling factors (v) are of prime interest as they are predicted to host exotic, topological states of matter. Here, we report here the observation of a FQHS at v = 1/2 in a two-dimensional electron system of exceptionally high quality, confined to a wide AlAs quantum well, where the electrons can occupy multiple conduction-band valleys with an anisotropic effective mass. The anisotropy and multivalley degree of freedom offer an unprecedented tunability of the v = 1/2 FQHS as we can control both the valley occupancy via the application of in-plane strain, and the ratio between the strengths of the short- and long-range Coulomb interaction by tilting the sample in the magnetic field to change the electron charge distribution. Thanks to this tunability, we observe phase transitions from a compressible Fermi liquid to an incompressible FQHS and then to an insulating phase as a function of tilt angle. We find that this evolution and the energy gap of the v = 1/2 FQHS depend strongly on valley occupancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of Enhanced Thermal Stability of Polarization in Lead-Free (Bi 1/2 Na 1/2 ) 0.94 Ba 0.06 TiO 3 /ZnO Ceramic Composites

(Bi 1/2 Na 1/2 )TiO 3 -based solid solutions, one of the major systems of lead-free piezoelectric ceramics, exhibit a low thermal depolarization temperature ( T d ~100°C). It was reported that by incorporating 30 mol% ZnO particles to form a ceramic composite of (Bi 1/2 Na 1/2 ) 0.94 Ba 0.06 TiO 3 /ZnO, the depolarization process can be shifted up to ~250 °C. In the present work, a variety of advanced transmission electron microscopy techniques, including in situ heating, annular bright-field, high-angle annular dark-field, geometric phase analysis, energy-dispersive spectrum and electron energy-loss spectroscopy, are employed to investigate the underlying mechanisms for the enhanced thermal stability of polarization in the composite. Furthermore, it is found that the abrupt depolarization in (Bi 1/2 Na 1/2 ) 0.94 Ba 0.06 TiO 3 at T d becomes diffused over a wide temperature window up to the temperature at maximum dielectric constant ( T m ) under the combined actions of the incorporation of Zn into the perovskite lattice, the presence of residual stresses, and the pinning effect on micron-sized domains provided by ZnO particles.

36 MATERIALS SCIENCE↗

Feasibility of a unified approach to intensity-modulated radiation therapy and volume-modulated arc therapy optimization and delivery

Purpose: To study the feasibility of unified intensity-modulated arc therapy (UIMAT) which combines intensity-modulated radiotherapy (IMRT) and volumetric-modulated arc therapy (VMAT) optimization and delivery to produce superior radiation treatment plans, both in terms of dose distribution and efficiency of beam delivery when compared with either VMAT or IMRT alone. Methods: An inverse planning algorithm for UIMAT was prototyped within the PINNACLE treatment planning system (Philips Healthcare). The IMRT and VMAT deliveries are unified within the same arc, with IMRT being delivered at specific gantry angles within the arc. Optimized gantry angles for the IMRT and VMAT phases are assigned automatically by the inverse optimization algorithm. Optimization of the IMRT and VMAT phases is done simultaneously using a direct aperture optimization algorithm. Five treatment plans each for prostate, head and neck, and lung were generated using a unified optimization technique and compared with clinical IMRT or VMAT plans. Delivery verification was performed with an ArcCheck phantom (Sun Nuclear) on a Varian TrueBeam linear accelerator (Varian Medical Systems). Results: In this prototype implementation, the UIMAT plans offered the same target dose coverage while reducing mean doses to organs at risk by 8.4% for head-and-neck cases, 5.7% for lung cases, and 3.5% for prostate cases, compared with the VMAT or IMRT plans. In addition, UIMAT can be delivered with similar efficiency as VMAT. Conclusions: In this proof-of-concept work, a novel radiation therapy optimization and delivery technique that interlaces VMAT or IMRT delivery within the same arc has been demonstrated. Initial results show that unified VMAT/IMRT has the potential to be superior to either standard IMRT or VMAT.

60 APPLIED LIFE SCIENCES↗

Determination of the size and phase composition of silver nanoparticles in a gel film of bacterial cellulose by small-angle X-ray scattering, electron diffraction, and electron microscopy

The nanoscale structural features in a composite (gel film of Acetobacter Xylinum cellulose with adsorbed silver nanoparticles, stabilized by N-polyvinylpyrrolidone) have been investigated by small-angle X-ray scattering. The size distributions of inhomogeneities in the porous structure of the cellulose matrix and the size distributions of silver nanoparticles in the composite have been determined. It is shown that the sizes of synthesized nanoparticles correlate with the sizes of inhomogeneities in the gel film. Particles of larger size (with radii up to 100 nm) have also been found. Electron microscopy of thin cross sections of a dried composite layer showed that large particles are located on the cellulose layer surface. Electron diffraction revealed a crystal structure of silver nanoparticles in the composite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NOvA joint $ν^{e}$ + $ν^{µ}$ oscillation results in neutrino and antineutrino modes

NOvA is an experiment devoted to studying neutrino oscillations in the NuMI neutrino beam from FNAL (USA). It is a long-baseline experiment consisting of two functionally identical, finely granulated detectors which are separated by 810 km of Earth crust and sited at 14 mrad off the beam axis. By measuring the transition probabilities P(νμ→νe \nu_\mu \rightarrow \nu_e ) and P(νμ→νμ \nu_\mu \rightarrow \nu_\mu ) NOvA is able to extract oscillation parameters: Δm232 \Delta m^2_{32} , mixing angle θ23 \theta_{23} , CP violating phase δCP \delta_{CP} and neutrino mass hierarchy. This analysis will be the first to include both neutrino (9⋅1020 9 \cdot 10^{20} POT) and antineutrino (7⋅1020 7 \cdot 10^{20} POT) data, which helps to resolve degeneracies in the oscillation probability. In this poster, the lastest NOvA oscillation results will be discussed, as well as important intermediate steps in νe \nu_e analysis like signal and background predictions, projected sensitivities in upcoming analyses will be presented.

Back, Ashley [Iowa State U.]↗

Explorer 45 observations of the proton ring current

Explorer 45 satellite data on the stormtime proton ring current are reported and analyzed. Storm-associated variations of equatorially mirroring protons, interactions between the ring current and the plasmapause, and storm recovery phase behavior are discussed. Pitch-angle distributions are plotted as a function of proton energy and radial distance, the structure implying domination of pitch-angle diffusion of ring-current protons in the plasmapause region by resonant interactions with ion cyclotron waves during storm recovery. The anisotropic precipitation in the plasmapause region and the more poleward isotropic precipitation observed at low altitudes outside the plasmapause are compared and distinguished.

Lyons, L. R.↗

EDIN design study alternate space shuttle booster replacement concepts. Volume 1: Engineering analysis

The use of a recoverable liquid rocket booster (LRB) system to replace the existing solid rocket booster (SRB) system for the shuttle was studied. Historical weight estimating relationships were developed for the LRB using Saturn technology and modified as required. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the study designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut off points of the shuttle reference mission 1. Performance analysis is based on a point design trajectory model which optimizes initial tilt rate and exoatmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle of attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary. Four basic configurations were investigated: a parallel burn vehicle with an F-1 engine powered LRB; a parallel burn vehicle with a high pressure engine powered LRB; a series burn vehicle with a high pressure engine powered LRB. The relative sizes of the LRB and the ET are optimized to minimize GLOW in most cases.

Demakes, P. T.↗

Characteristics of reflected and diffuse ions upstream from the earth's bow shock

The distinction between two types of upstream ion populations is made on the basis of pronounced differences in their distribution functions. The reflected ions represent a fast beam with temperatures typically one-million to five-million K and speeds up to five times the solar wind speed. An important feature of the reflected ion distributions is their strong temperature anisotropy, with perpendicular temperature exceeding parallel temperature by a factor of two or three. In contrast, the diffuse ions occupy a much larger region of phase space, both in energy and angle; their distribution function generally has the form of a circular ridge in two dimensions and a spherical shell in three dimensions. Accordingly, their temperature is much larger (not less than about 10-million K) and their bulk speed is typically smaller than the solar wind speed.

Paschmann, G.↗

Accreting X-ray pulsar atmospheres heated by Coulomb deceleration of protons

Results are presented from detailed self-consistent models of accreting magnetized neutron star atmospheres, heated by the gradual deceleration of infalling protons via Coulomb encounters. The temperature and density gradients are calculated assuming momentum and energy balance, coupled with the radiative transfer for two polarizations. The cyclotron resonance effects were treated approximately. These models are characterized by power-law energy spectra, with single pulses at higher frequencies and multiple pulses at lower ones for some aspect angles, as well as a phase-dependent spectral index.

Meszaros, P.↗

Infrared studies of the bipolar nebula OHO739

Infrared studies have been made of the M9 giant OHO739, which is embedded in a bipolar nebula, in order to study the structure and density distribution of the circumstellar disk, and preliminary results are reported. The degree of polarization across the 3.1 micron ice band in an 8 arcsec beam centered at the 2.2 micron peak is found to increase with extinction in the ice band, as expected for a bipolar scattering nebula. A distance of 2 kpc is inferred from the tilt angle of the bipolar axis and phase lag measurements of the OH maser. Maps made in the K band and in narrow bands at 2.85, 3.1, and 3.5 microns by raster-scanning OHO739 are presented. In all maps, the object is clearly elongated along the bipolar axis. Patterns of increases and decreases in extinction in the object are inferred to indicate that ice particles are widespread through the nebula and not just concentrated in the disk.

Tielens, A. G. G. M.↗

Photometric properties of lunar terrains derived from Hapke's equation

Hapke's bidirectional reflectance equations provide the most rigorous available description of photometric behavior in terms of physically meaningful parameters. The primary objective of this study was to derive Hapke parameters for the lunar surface from both disk-integrated and disk-resolved photometric data. Hapke's equation was fit to the disk-integrated phase curves and disk-resolved data for dark, average, and bright terrain classes using an iterative, nonlinear least squares algorithm described by Helfenstein. Parameters were initially determined from the disk-integrated data, and the result was applied as a first guess to the iterative solution of parameters for individual terrain classes. Plots are presented of the disk-resolved data normalized to corresponding brightnesses predicted from the disk-integrated solution under the same illumination and viewing geometries. Systematic trends in disk-resolved parameters can be identified. Values for single scattering albedo (w) of the dominantly anorthositic average and bright terrains are significantly larger than the value for the basaltic dark terrains (mare). Values for surge brightness parameters, particle phase function, and average topographic slope angle are also discussed.

Helfenstein, Paul↗

Acousto-ultrasonic input-output characterization of unidirectional fiber composite plate by SV waves

A unidirectional fiberglass epoxy compostie specimen is modelled as a homogeneous transversely isotropic continuum plate medium. Acousto-ultrasonic noncontact input-output characterization is studied theoretically with a transmitting and a receiving transducer located on the same face of the plate. The single reflection problem for an incident SV wave at a plane boundary in transversely isotropic medium is analyzed. An obliquely incident SV wave results in a reflected SV wave and a reflected P wave for an angle of incidence of the incident SV wave less than the critical angle. Otherwise, there exists only an SV wave in the medium as the reflected P wave degenerates into a surface wave travelling parallel to the plane boundary. The amplitude ratio of the reflected SV wave is -1 when the angle of incidence is greater than or = the critical angle. The directional dependence of the phase velocity of the SV wave propagating in the transversely isotropic medium has a significant effect on the delay time, as opposed to the directional independence of the phase velocity of a shear wave propagating in an isotropic medium. The displacements associated with the SV wave in the plate and which may be detected by the noncontact receiving transducer are approximated by an asymptotic solution for an infinite transversely isotropic medium subjected to a harmonic point load.

Liao, Peter↗

The determination of the topological structure of skin friction lines on a rectangular wing-body combination

A short tutorial in the application of topological ideas to the intepretation of oil flow patterns is presented. Topological concepts such as critical points, phase portraits, topological stability, and indexing are discussed. These concepts are used in an ordered procedure to construct phase portraits of skin friction lines with oil flow patterns for a wing-body combination and two angles of attack. The relationship between the skin friction phase portrait and planar cuts of the velocity field is also discussed.

Yates, Leslie A.↗