Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Recent Thermal and Hydraulic Stimulation Results at Raft River, ID EGS Site

The Raft River geothermal system, located 160 km northwest of Salt Lake City, Utah is the site of a Department of Energy Enhanced Geothermal System (EGS) stimulation demonstration project. The target well RRG-9 ST-1, is roughly 1.6 km (1 mile) south of the power plant. This well has undergone a series of thermal and hydraulic stimulation treatments. Furthermore, the well passes through approximately 1,524 m MD (5,000 ft. MD) of laterally discontinuous Quaternary and Tertiary volcanoclastic and volcanic rocks that unconformably overlie the Precambrian basement. The Elba Quartzite formation located in the Precambrian basement is the target zone for the stimulation program. Fluid injected into the well exits through a fracture zone in the Elba Quartzite at 1,567 m TVD (5,140 ft. TVD). In June 2013 low-rate stimulation began at RRG-9 ST-1 using injection water from the geothermal plant. The average injection rate, temperature, and well head pressure of the low-rate stimulation was 163 Lpm (43 gpm), 34°C, and 1,931kPa (280 psig), respectively. This injection continued through late August of 2013 when wellhead pressures were intentionally increased to approximately 5,516 kPa (800 psig) at approximately 984 Lpm (260 gpm). From September 12 to September 24, 2013 cold well water was injected. The average surface injection temperature was approximately 12°C. On September 25, 2013 injection of the warmer plant water was resumed. This was continued through the rest of 2013 and into 2014. Between April 1, 2014 and April 4, 2014, a higher rate hydraulic stimulation was conducted. Colder water (~10°C) was injected at rates of 20 bpm to 30 bpm (3,178 Lpm to 4,770 Lpm) at wellhead pressures of 5,861 kPa (850 psig) over approximately 24 hours. Microseismic activity was recorded near the Tertiary-Precambrian contact. Subsequently, injection of water from the plant was resumed. As of mid-January, 2015, over 666 million liters (176 million gallons) have been injected into the well. The fate of this water is the subject of ongoing numerical analyses and continuous site monitoring. Various analyses have been implemented to monitor and assess the ongoing stimulation program. Modified Hall plot analysis shows increasing conductivity and/or a decreasing skin factor around the wellbore. Since April, 2014, the injectivity index has increased significantly from 0.28 Lpm/kPa (0.5 gpm/psig) to 0.93 Lpm/kPa (1.7 gpm/psig).

enhanced geothermal system↗

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu 12-x MxSb 4 S 13 , where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m -1 K -1 ) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive. In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu 10.5 NiZn 0.5 Sb 4 S 13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu 14 Sb 4 S 13 is revealed by Cu self-diffusivity, nuclear density map and “nudged elastic band” (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu1 0 Zn 2 Sb 4 S 13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu 12 Sb 4 S 13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li 3 PO 4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability.

Li, Junchao↗

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR LiPON

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu12-xMxSb4S13, where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m-1 K-1) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive.In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu10.5NiZn0.5Sb4S13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu14Sb4S13 is revealed by Cu self-diffusivity, nuclear density map and "nudged elastic band" (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu10Zn2Sb4S13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu12Sb4S13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li3PO4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability

25 ENERGY STORAGE↗

Performance Advantaged ..beta..-Ketone Containing Polymers - Benefits in Manufacturing, Performance, and End-of-Life

Biomass derived chemicals can possess extended functionality, often in the form of heteroatoms like oxygen and nitrogen, that can enable performance advantaged properties in emergent materials. These performance advantages can manifest in multiple ways such as reduced manufacturing intensity, better performance, or enhanced end-of-life options. One illustrative example of this concept is ..beta..-ketoadipic acid (..beta..KA), a C6 dicarboxylic acid with a ketone in its backbone. ..beta..KA can be obtained via biological cultivation from aromatic compounds, sugars, and even waste plastics. When ..beta..KA is implemented into polymers, namely nylons, in place of adipic acid the overall material properties are increased. Specifically, the glass transition temperature (which is the measurement at which temperature a plastic softens) is increased by 69 degrees C and the water permeability is reduced by 20%. Molecular dynamic (MD) simulations reveal that the ..beta..-ketone in ..beta..KA leads to restricted movement across multiple backbone carbons when compared to adipic acid. Furthermore, MD simulations reveal that the ..beta..-ketone, when compared to no-ketone or an a-ketone, can lead to an increase in hydrogen bonding between neighboring chains. Both phenomena may help explain the molecular origin of the increases in polymer performance. When implemented into polyesters, namely PET, ..beta..KA can maintain the requisite performance while enabling enhanced degradation. Aside from performance advantages in thermomechanical performance, the production of ..beta..KA also is advantaged in its manufacturing. Although estimates for the minimum selling price (MSP) of ..beta..KA exceed adipic acid the manufacture of ..beta..KAwould reduce supply chain energy and GHG emissions by >50% and >30% respectively. Further TEA analysis reveals that the MSP of ..beta..KA is primarily driven by the feedstock cost while the capital expenditures are driven largely by fermentation costs. Overall, the work presented within will be illustrative of how biomass derived molecules, namely ..beta..KA, can manifest performance advantages across multiple benchmarks and may enable a path to market for biomass-derived materials.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗

..beta..-Ketoadipic Acid Production in P. putida for Performance-Advantaged Nylons

Biomass derived chemicals can possess extended functionality, often in the form of heteroatoms like oxygen and nitrogen, that can enable performance advantaged properties in emergent materials. One illustrative example of this concept is ..beta..-ketoadipic acid (..beta..KA), a C6 dicarboxylic acid with a ketone in its backbone. ..beta..KA can be obtained via biological cultivation from aromatic compounds, sugars, and even waste plastics. When ..beta..KA is implemented into polymers, namely nylons, in place of adipic acid the overall material properties are increased. Specifically, the glass transition temperature (which is the measurement at which temperature a plastic softens) is increased by 69 degrees C and the water permeability is reduced by 20%. Molecular dynamic (MD) simulations reveal that the ..beta..-ketone in ..beta..KA leads to restricted movement across multiple backbone carbons when compared to adipic acid. Furthermore, MD simulations reveal that the ..beta..-ketone, when compared to no-ketone or an a-ketone, can lead to an increase in hydrogen bonding between neighboring chains. Both phenomena may help explain the molecular origin of the increases in polymer performance. Aside from performance advantages in thermomechanical performance, the production of ..beta..KA also is advantaged in its manufacturing. Although estimates for the minimum selling price (MSP) of ..beta..KA exceed adipic acid the manufacture of ..beta..KA would reduce supply chain energy and GHG emissions by >50% and >30% respectively. Further TEA analysis reveals that the MSP of ..beta..KA is primarily driven by the feedstock cost while the capital expenditures are driven largely by fermentation costs. Overall, the work presented within will be illustrative of how biomass derived molecules, namely ..beta..KA, can manifest performance advantages across multiple benchmarks and may enable a path to market for biomass-derived materials.

beta-ketoadipic acid↗

Development of Multicomponent EAM Potential for Ni-Based Superalloy

We initiated the development of multi-component EAM potentials for Aluminides and Carbides, key phases in Ni-based Superalloys. The goal is to utilize the MD simulation to understand the deformation dynamics that contribute to the formation of voids and creep initiation. For this purpose, we constructed the raw data from ab-initio (molecular dynamics) MD simulations fed into the potential development code and used Nickel as the base metal with the addition of a number of various elements including Aluminum, Chromium, Tungsten. We then developed the EAM potentials for the aluminide and carbide phases using the force-fitting code MEAMfit. Our generated potential reproduces the fundamental properties of the Ni3Al and Mo23C6 phases. We verified further the EAM potential through the thermal stability test at different temperatures and by reproducing the elastic constants consistent with the experimental values.

36 MATERIALS SCIENCE↗

Contact detection acceleration in pebble flow simulation for pebble bed reactor systems

Pebble flow simulation plays an important role in the steady state and transient analysis of thermal-hydraulics and neutronics for Pebble Bed Reactors (PBR). The Discrete Element Method (DEM) and the modified Molecular Dynamics (MD) method are widely used to simulate the pebble motion to obtain the distribution of pebble concentration, velocity, and maximum contact stress. Although DEM and MD present high accuracy in the pebble flow simulation, they are quite computationally expensive due to the large quantity of pebbles to be simulated in a typical PBR and the ubiquitous contacts and collisions between neighboring pebbles that need to be detected frequently in the simulation, which greatly restricted their applicability for large scale PBR designs such as PBMR400. Since the contact detection accounts for more than 60% of the overall CPU time in the pebble flow simulation, the acceleration of the contact detection can greatly enhance the overall efficiency. In the present work, based on the design features of PBRs, two contact detection algorithms, the basic cell search algorithm and the bounding box search algorithm are investigated and applied to pebble contact detection. The influence from the PBR system size, core geometry and the searching cell size on the contact detection efficiency is presented. Our results suggest that for present PBR applications, the bounding box algorithm is less sensitive to the aforementioned effects and has superior performance in pebble contact detection compared with basic cell search algorithm. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of molecular dynamics potential for uranium silicide fuels

The use of uranium-silicide (U-Si) in place of uranium dioxide (UO{sub 2}) is one of the promising concepts being proposed to increase the accident tolerance of nuclear fuels for light water reactors. First-principles based density functional theory (DFT) electronic structure calculations may provide the most reliable information. However, it is probably not possible to obtain kinetic information such as amorphization under irradiation directly from DFT simulations due to size and time limitations. Thus, a more feasible way may be to employ molecular dynamics (MD) simulation. Unfortunately, so far no MD potential is available for U-Si to discover the underlying mechanisms. Here, we present our recent progress in developing a U-Si potential. The development is based on the Tersoff type potentials for single element U and Si. The Si potential is taken from the literature and a Tersoff type U potential is developed in this project. With the primary focus on the U{sub 3}Si{sub 2} phase, some other U-Si systems such as U{sub 3}Si are also included as a test of the transferability of the potentials for binary U-Si phases. Based on the potentials for unary U and Si, two sets of parameters for the binary U-Si system are developed using the Tersoff mixing rules and the cross-term fitting, respectively. The cross-term potential is found to give better results on the enthalpy of formation, lattice constants and elastic constants than those produced by the Tersoff mixing potential, with the reference data taken from either experiments or DFT calculations. In particular, the results on the formation enthalpy and lattice constants for the U{sub 3}Si{sub 2} phase and lattice constants for the high temperature U{sub 3}Si (h-U{sub 3}Si) phase generated by the cross-term potential agree well with experimental data. Reasonable agreements are also reached on the elastic constants of U{sub 3}Si{sub 2}, on the formation enthalpy for the low temperature U{sub 3}Si (m-U{sub 3}Si) and h-U{sub 3}Si phases, and on the lattice constants of m-U{sub 3}Si phase. All these phases are predicted to be mechanically stable. The unary U potential is also tested for three metallic U phases (α, β, γ). The potential is found capable to predict the cohesive energies well against experimental data for all three phases. It matches reasonably with previous experiments on the lattice constants and elastic constants of αU. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Applications of Transient Grating Spectroscopy to Radiation Materials Science

Radiation damage is an inherently multi-scale phenomenon, with much of the key material evolution occurring at the mesoscale. Current techniques for the direct interrogation of material property changes due to irradiation either function with very small volumes, such as in-situ TEM, cannot cover the full range of defect populations produced, such as in positron annihilation spectroscopy, or requires destruction of the test material, such as in standard or micromechanical testing. In addition, the ultimate quantities of interest to radiation materials scientists are the changes in key material properties with irradiation. These include stiffness, ductility, and thermal conductivity for structural materials, and optical properties such as index of refraction or changes in transmittance spectra for optically active materials. The latter of these are often correlated directly to stress- or thermally-induced changes, themselves a function of the specific defect populations responsible for their change. The rapid study of such a mesoscale phenomenon requires an inherently mesoscale technique, where multiple quantities of interest can be accurately measured in very short times. Determining the sensitivity of any technique with known certainly is of critical importance to qualifying a new technique to measure in-situ material property changes during irradiation. In this paper, we present the new applicability of an existing technique, known as transient grating (TG) spectroscopy, to rapidly and accurately study key problems in radiation materials science. Results quantifying the absolute sensitivity of the technique are presented, alongside molecular dynamics (MD) simulations of the TG spectroscopy process to gauge direct agreement between theory, simulation, and experiment. An example problem of interest is demonstrated as an illustration of what is possible, showing elastic and thermal changes in irradiated silicon carbide (SiC) films. Finally, future work to quantify the effects of experimentally-simulated radiation defects is proposed, in support of building a database to use TG spectroscopy to deconvolve irradiated material property changes in-situ in terms of the defect populations responsible for their evolution. The application of the TG spectroscopy technique to in-situ radiation materials science has the potential to answer long-standing questions in the field, relating to ion beam rastering, the onset of void swelling, and direct measurement of radiation-created point defect concentrations. Before it can do so, the technique must carefully be analyzed and tuned to increase its sensitivity, the certainty of its results, and the ability to predict radiation-induced changes by simulations must be developed. Making such measurements in-situ with the aid of predictive MD simulations has the potential to elucidate mechanisms of radiation damage accumulation, as well as more rapidly qualify radiation-resistant alloys for service in nuclear systems. Work is underway to build this database of experimentally-simulated radiation-produced defects, which will be combined and compared with actual irradiated materials for eventual in-situ deconvolution of the TG signal into the defect populations responsible for irradiation-induced microstructural change. (authors)

36 MATERIALS SCIENCE↗

Fundamental Investigations into the Properties and Performance of Advanced Materials

Intelligent engineering designs require an accurate understanding of material behavior, since any uncertainties or gaps in knowledge must be counterbalanced with heightened factors of safety, leading to overdesign. Therefore, building better structures and pushing the performance of new components requires an improved understanding of the thermomechanical response of advanced materials under service conditions. This dissertation provides fundamental investigations of several advanced materials: thermoset polymers, a common matrix material for fiber-reinforced composites and nanocomposites; aluminum alloy 7075-T6 (AA7075-T6), a high-performance aerospace material; and ceramic matrix composites (CMCs), an advanced composite for extreme-temperature applications. To understand matrix interactions with various interfaces and nanoinclusions at their fundamental scale, the properties of thermoset polymers are studied at the atomistic scale. An improved proximity-based molecular dynamics (MD) technique for modeling the crosslinking of thermoset polymers is carefully established, enabling realistic curing simulations through its ability to dynamically and probabilistically perform complex topology transformations. The proximity-based MD curing methodology is then used to explore damage initiation and the local anisotropic evolution of mechanical properties in thermoset polymers under uniaxial tension with an emphasis on changes in stiffness through a series of tensile loading, unloading, and reloading experiments. Aluminum alloys in aerospace applications often require a fatigue life of over 109 cycles, which is well over ii the number of cycles that can be practically tested using conventional fatigue testing equipment. In order to study these high-life regimes, a detailed ultrasonic cycle fatigue study is presented for AA7075-T6 under fully reversed tension-compression loading. The geometric sensitivity, frequency effects, size effects, surface roughness effects, and the corresponding failure mechanisms for ultrasonic fatigue across different fatigue regimes are investigated. Finally, because CMCs are utilized in extreme environments, oxidation plays an important role in their degradation. A multiphysics modeling methodology is thus developed to address the complex coupling between oxidation, mechanical stress, and oxygen diffusion in heterogeneous carbon fiber-reinforced CMC microstructures.

Schichtel, Jacob J.↗

Transfer of Rovibrational Energies in Hydrogen Plasma-Carbon Surface Interactions

We present state-of-the-art molecular dynamics (MD) simulations of high-density plasma-bombardment of carbon, mimicking plasma-wall interactions at the fusion reactor first wall. Bare and hydrogenated amorphous carbon surfaces with temperatures in the range of 300-800K are bombarded by a distribution of neutral hydrogen molecules representing well defined center-of-mass and rovibrational temperatures. The MD simulations are benchmarked against experiments in which a heated carbon surface is irradiated with hydrogen molecules from a plasma source. Comparisons between simulations and experiment are presented for the rovibrational distributions upon reflection and the rotational and vibrational accommodation coefficients.

08 HYDROGEN↗

Stress-induced phase transformation in nanocrystalline UO2

We report a stress-induced phase transfonnation in stoichiometric UO{sub 2} from fluorite to the {alpha}-PbO{sub 2} structure using molecular dynamics (MD) simulations and density functional theory (DFT) calculations. MD simulations, performed on nanocrystalline microstructure under constant-stress tensile loading conditions, reveal a heterogeneous nucleation of the {alpha}-PbO{sub 2} phase at the grain boundaries followed by the growth of this phase towards the interior of the grain. The DFT calculations confinn the existence of the {alpha}-PbO{sub 2} structure, showing that it is energetically favored under tensile loading conditions.

36 MATERIALS SCIENCE↗

Structure and Phase Transitions of Monolayers of Intermediate-length n-alkanes on Graphite Studied by Neutron Diffraction and Molecular Dynamics Simulation

We present evidence from neutron diffraction measurements and molecular dynamics (MD) simulations of three different monolayer phases of the intermediate-length alkanes tetracosane (n-C(24)H(50) denoted as C24) and dotriacontane (n-C(32)H(66) denoted as C32) adsorbed on a graphite basal-plane surface. Our measurements indicate that the two monolayer films differ principally in the transition temperatures between phases. At the lowest temperatures, both C24 and C32 form a crystalline monolayer phase with a rectangular-centered (RC) structure. The two sublattices of the RC structure each consists of parallel rows of molecules in their all-trans conformation aligned with their long axis parallel to the surface and forming so-called lamellas of width approximately equal to the all-trans length of the molecule. The RC structure is uniaxially commensurate with the graphite surface in its [110] direction such that the distance between molecular rows in a lamella is 4.26 A=sqrt[3a(g)], where a(g)=2.46 A is the lattice constant of the graphite basal plane. Molecules in adjacent rows of a lamella alternate in orientation between the carbon skeletal plane being parallel and perpendicular to the graphite surface. Upon heating, the crystalline monolayers transform to a 'smectic' phase in which the inter-row spacing within a lamella expands by approximately 10% and the molecules are predominantly oriented with the carbon skeletal plane parallel to the graphite surface. In the smectic phase, the MD simulations show evidence of broadening of the lamella boundaries as a result of molecules diffusing parallel to their long axis. At still higher temperatures, they indicate that the introduction of gauche defects into the alkane chains drives a melting transition to a monolayer fluid phase as reported previously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and charging kinetics of electrical double layers at large electrode voltage

The structure and charging kinetics of electrical double layers (EDLs) at interfaces of NaCl solutions and planar electrodes are studied by molecular dynamics (MD) and Poisson Nernst Planck (PNP) simulations. Based on the MD results and prior experimental data, we show that counterion packing in planar EDLs does not reach the steric limit at electrode voltages below 1 V. In addition, we demonstrate that a PNP model, when complemented with a Stern model, can be effectively used to capture the overall charging kinetics. However, the PNP/Stern model can only give a qualitative description of the fine features of the EDL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of shocked polymers : Mbar experiments on Z and multi-scale simulations.

Significant progress has been made over the last few years in understanding properties of matter subject to strong shocks and other extreme conditions. High-accuracy multi-Mbar experiments and first-principles theoretical studies together provide detailed insights into the physics and chemistry of high energy-density matter. While comprehensive advances have been made for pure elements like deuterium, helium, and carbon, progress has been slower for equally important, albeit more challenging, materials like molecular crystals, polymers, and foams. Hydrocarbon based polymer foams are common materials and in particular they are used in designing shock- and inertial confinement fusion experiments. Depending on their initial density, foams shock to relatively higher pressure and temperature compared to shocked dense polymers/plastics. As foams and polymers are shocked, they exhibit both structural and chemical transitions. We will present experimental and theoretical results for shocked polymers in the Mbar regime. By shock impact of magnetically launched flyer plates on poly(4-methyl-1-pentene) foams, we create multi-Mbar pressures in a dense plasma mixture of hydrogen, carbon, at temperatures of several eV. Concurrently with executing experiments, we analyze the system by multi-scale simulations, from density functional theory to continuum magneto-hydrodynamics simulations. In particular, density functional theory (DFT) molecular dynamics (MD) and classical MD simulations of the principal shock Hugoniot will be presented in detail for two hydrocarbon polymers: polyethylene (PE) and poly(4-methyl-1-pentene) (PMP).

08 HYDROGEN↗

Plasticity and Failure in Nanocrystalline BCC Metals via Molecular Dynamics Simulation

Advances in the ability to generate extremely high pressures in dynamic experiments such as at the National Ignition Facility has motivated the need for special materials optimized for those conditions as well as ways to probe the response of these materials as they are deformed. We need to develop a much deeper understanding of the behavior of materials subjected to high pressure, especially the effect of rate at the extremely high rates encountered in those experiments. Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum at pressures less than 100 GPa to investigate the processes associated with plastic deformation for strains up to 100%. We focus on 3D polycrystalline systems with typical grain sizes of 10-20 nm. We also study a rapidly quenched liquid (amorphous solid) tantalum. We apply a constant volume (isochoric), constant temperature (isothermal) shear deformation over a range of strain rates, and compute the resulting stress-strain curves to large strains for both uniaxial and biaxial compression. We study the rate dependence and identify plastic deformation mechanisms. The identification of the mechanisms is facilitated through a novel technique that computes the local grain orientation, returning it as a quaternion for each atom. This analysis technique is robust and fast, and has been used to compute the orientations on the fly during our parallel MD simulations on supercomputers. We find both dislocation and twinning processes are important, and they interact in the weak strain hardening in these extremely fine-grained microstructures. We also present some results on void growth in nanocrystalline BCC metals under tension.

36 MATERIALS SCIENCE↗

Microstructural Stability of Nanocrystalline Copper through the Addition of Antimony Dopants at Grain Boundaries: Experiments and Molecular Dynamics Simulations

Experiments and simulations show that the microstructural stability of nanocrystalline Cu can be improved by adding impurity atoms, such as Sb, which migrate to the grain boundaries. Cu100-xSbx alloys are cast in three compositions (Cu-0.0, 0.2 and 0.5 at.%Sb) and subsequently processed into nanocrystalline form by equal channel angular extrusion (ECAE). The presence of Sb atoms at the grain boundaries increases the recrystallization temperature to 400 C compared to 200 C for pure nanocrystalline Cu, which was verified by measurements of microhardness, ultimate tensile strength, grain size using TEM, and Auger electron spectroscopy. Molecular dynamics (MD) simulations were performed using a wider range of Sb compositions (0.0 to 1.0 at.%Sb) to study the underlying mechanisms associated with stability. MD simulations show that Sb atoms reduce excess grain boundary energy and that 0.2 and 0.5 at.%Sb is enough to stabilize the nanocrystalline Cu microstructure.

36 MATERIALS SCIENCE↗

Evaluating the Effectiveness of Soil Profile Rehabilitation for Pluvial Flood Mitigation Through Two-Dimensional Hydrodynamic Modeling

Pluvial flooding, driven by increasingly impervious surfaces and intense storm events, presents a growing challenge for urban areas worldwide. In Baltimore City, MD, USA, climate change, rapid urbanization, and aging stormwater infrastructure are exacerbating flooding impacts, resulting in significant socio-economic consequences. This study evaluated the effectiveness of a soil profile rehabilitation scenario using a 2D hydrodynamic modeling approach for the Tiffany Run watershed, Baltimore City. This study utilized different extreme storm events, a high-resolution (1 m) LiDAR Digital Terrain Model (DTM), building footprints, and hydrological soil data. These datasets were integrated into a fully coupled 2D hydrodynamic model, the City Catchment Analysis Tool (CityCAT), to simulate urban flood dynamics. The pre-soil rehabilitation simulation revealed a maximum water depth of 3.00 m in most areas, with hydrologic soil groups C and D, especially downstream of the study area. The post-soil rehabilitation simulation was targeted at vacant lots and public parcels, accounting for 33.20% of the total area of the watershed. This resulted in a reduced water depth of 2.50 m. Additionally, the baseline runoff coefficient of 0.49 decreased to 0.47 following the rehabilitation, and the model consistently recorded a peak runoff reduction rate of 4.10 across varying rainfall intensities. The validation using a contingency matrix demonstrated true-positive rates of 0.75, 0.50, 0.64, and 0 for the selected events, confirming the model’s capability at capturing real-world flood occurrences.

Baltimore City↗