Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Ion Beam Analysis of the Thermal Stability of Hydrogenated Diamond-Like Carbon Thin Films on Si Substrate

Unbalanced magnetron sputtering deposition of C-H films has been performed with various levels of negative substrate bias and with a fixed flow rate of hydrogen. Argon was used as a sputtering gas and formed the majority of the gas in the plasma. The effect of hydrogenation on the final concentration of trapped elements and their thermal stability with respect to hydrogen content is studied using ion beam analysis (IBA) techniques. The elemental concentrations of the films were measured in the films deposited on silicon substrates with a 2.5 MeV of H{sup +} beam, which is used to perform Rutherford Backscattering Spectrometry (RBS) and Non-Rutherford Backscattering spectrometry (NRBS) and with 16 MeV of O{sup 5+} beam, used to perform Elastic Recoil Detection Analysis (ERDA). Effect of bias on the thermal stability of trapped hydrogen in the films has been studied. As the films were heated in-situ in vacuum using a non-gassy button heater, hydrogen was found to be decreasing around 400 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic phases and structural properties in Co/Ru superlattices

We report studies by x-ray diffraction, ferromagnetic resonance (FMR), and x-ray magnetic circular dichroism (XMCD) in Co/Ru superlattices grown by magnetron sputtering. We studied the [Co(50 A)/Ru(t{sub Ru})]{sub 20} samples, which were deposited at room temperature on Si substrates with the Ru thicknesses, t{sub Ru}, varying between 9 and 33 A. The main and secondary uniform absorption modes, observed in the FMR spectra, are associated with the Co/Ru interfaces and the bulk Co regions, respectively. The main mode becomes more intense than the secondary one for increasing t{sub Ru}. This is attributed to the roughness and/or atomic interdiffusion, which leads, with increasing t{sub Ru}, to an increasing volume of Co/Ru interfacial regions and a decreasing volume of pure Co regions. The XMCD measurements provide Co spin magnetic moments lower than the bulk Co value, confirming the presence of a Co magnetic region with a lower local effective magnetization attributed to the Co/Ru interfaces.

36 MATERIALS SCIENCE↗

Aluminum incorporation in Ti{sub 1-x}Al{sub x}N films studied by x-ray absorption near-edge structure

The local bonding structure of titanium aluminum nitride (Ti{sub 1-x}Al{sub x}N) films grown by dc magnetron cosputtering with different AlN molar fractions (x) has been studied by x-ray absorption near-edge structure (XANES) recorded in total electron yield mode. Grazing incidence x-ray diffraction (GIXRD) shows the formation of a ternary solid solution with cubic structure (c-Ti{sub 1-x}Al{sub x}N) that shrinks with the incorporation of Al and that, above a solubility limit of xapprox0.7, segregation of w-AlN and c-Ti{sub 1-x}Al{sub x}N phases occurs. The Al incorporation in the cubic structure and lattice shrinkage can also be observed using XANES spectral features. However, contrary to GIXRD, direct evidence of w-AlN formation is not observed, suggesting a dominance and surface enrichment of cubic environments. For x>0.7, XANES shows the formation of Ti-Al bonds, which could be related to the segregation of w-AlN. This study shows the relevance of local-order information to assess the atomic structure of Ti{sub 1-x}Al{sub x}N solutions.

36 MATERIALS SCIENCE↗

Aluminum doped zinc oxide for organic photovoltaics

Aluminum doped zinc oxide (AZO) was grown via magnetron sputtering as a low-cost alternative to indium tin oxide (ITO) for organic photovoltaics (OPVs). Postdeposition ozone treatment resulted in devices with lower series resistance, increased open-circuit voltage, and power conversion efficiency double that of devices fabricated on untreated AZO. Furthermore, cells fabricated using ozone treated AZO and standard ITO displayed comparable performance.

36 MATERIALS SCIENCE↗

Metal--Insulator Transition in Bi{sub 2}Sr{sub 2}Cu{sub 1}O{sub 6+d}(Bi-2201) Thin Films

We have studied the influence of disorder induced by oxygen on the normal state resistivity of under doped Bi{sub 2}Sr{sub 2}Cu{sub 1}O{sub 6+d}(Bi-2201) thin films, deposited in situ onto heated SrTiO{sub 3}(100) substrates by using DC magnetron sputtering for an off-stoichiometric target. The compositions and structural characterization for the deposited films were carried by (EDX), (XPS) and X-ray diffraction measurements. The effect of partial oxygen pressure in the sputtering gas on the metal-insulator transition are presented.

36 MATERIALS SCIENCE↗

Interfacial and structural properties of sputtered HfO{sub 2} layers

Magnetron sputtered HfO{sub 2} layers formed on a heated Si substrate were studied by spectroscopic ellipsometer (SE), x-ray diffraction (XRD), Fourier transform infrared (FTIR), and x-ray photoelectron spectroscopy (XPS) depth profiling techniques. The results show that the formation of a SiO{sub x} suboxide layer at the HfO{sub 2}/Si interface is unavoidable. The HfO{sub 2} thickness and suboxide formation are highly affected by the growth parameters such as sputtering power, O{sub 2}/Ar gas ratio during sputtering, sputtering time, and substrate temperature. XRD spectra show that the deposited film has (111) monoclinic phase of HfO{sub 2}, which is also supported by FTIR spectra. The atomic concentration and chemical environment of Si, Hf, and O have been measured as a function of depth starting from the surface of the sample by XPS technique. It shows that HfO{sub 2} layers of a few nanometers are formed at the top surface. Below this thin layer, Si-Si bonds are detected just before the Si suboxide layer, and then the Si substrate is reached during the depth profiling by XPS. It is clearly understood that the highly reactive sputtered Hf atoms consume some of the oxygen atoms from the underlying SiO{sub 2} to form HfO{sub 2}, leaving Si-Si bonds behind.

36 MATERIALS SCIENCE↗

Structure and corrosion behavior of platinum/ruthenium/nitrogen doped diamondlike carbon thin films

Platinum/ruthenium/nitrogen doped diamondlike carbon (PtRuN-DLC) thin films were deposited on p-Si (100) substrates with dc magnetron cosputtering by varying the dc power applied to a Pt{sub 50}Ru{sub 50} target to investigate the effect of Pt and Ru incorporation in the films on the bonding structure, adhesion strength, surface morphology, and corrosion behavior of the films by means of X-ray photoelectron spectroscopy, micro-Raman spectroscopy, microscratch test, atomic force microscopy, scanning electron microscopy, and potentiodynamic polarization test. It was found that the incorporation of Pt and Ru in the N-DLC films improved the corrosion resistance of the films in a 0.1M NaCl solution at lower polarization potentials though more sp{sup 2} bonds were formed in the films. However, the films with higher Pt and Ru contents degraded earlier than the ones with lower Pt and Ru contents at higher polarization potentials.

36 MATERIALS SCIENCE↗

On the delamination dynamic of sputtered amorphous carbon nitride films

We present in this study a spectroscopic investigation of spontaneous delamination of amorphous carbon nitride (a-CN{sub x}) films deposited on silicon substrates (Si) by rf magnetron sputtering of a graphite target in pure Ar/N{sub 2} gas mixture. The microstructural properties of the films were determined in their as-deposited state using infrared absorption and Raman spectroscopy experiments. Various shapes of debonding patterns have been observed. Based on the present experimental evidence, a description of nitrogen incorporation and the resulting hybridization states of the CN bonds in the a-CN{sub x} films prior and after delamination are proposed to elucidate the microstructural origin of this delamination occurring along the a-CN{sub x}/Si interface and the physicochemical mechanism that governed its dynamic.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe-rich Fe-V alloy films

Polycrystalline Fe{sub 100-x}V{sub x} with x=0 to 14 at.% V films on a glass substrate were made by the dc magnetron sputtering method. The deposition temperature was 250 deg. C. The magnetic properties, i.e., saturation magnetization 4piM{sub s}, bulk-pinning field for a domain wall H{sub cw}, coercive force H{sub c}, initial permeability mu{sub i}, maximum permeability mu{sub m}, saturation magnetostriction lambda{sub s}, and electrical property, such as the electrical resistivity rho of the Fe-V films, were measured. We find that 4piM{sub s} is a decreasing function of x, H{sub c}, and/or H{sub cw} has a minimum at xapprox =x{sub 0}=8 at. % V, mu{sub i}, mu{sub m}, and/or mu{sub c} has a maximum at x=x{sub 0}, lambda{sub s}approx =0 at x=x{sub 0}, and rho is an increasing function of x. These new magnetic results are consistent with earlier magnetostriction measurements [Jen and Chen, J. Magn. Magn. Mater. 204, 165 (1999)] and theoretical calculations [Ostanin, Staunton, and Razee, Phys. Rev. B 69, 064425 (2004)]. Moreover, all the magnetic features in the x dependence of H{sub c}, H{sub cw}, mu{sub i}, mu{sub m}, mu{sub c}, and lambda{sub s}, respectively, can be explained within the framework of the bulk-pinning (or surface-pinning) and the end-pinning (or nucleation) models. Briefly, the pinning model analysis of the magnetic hysteresis data confirms the inference that near zero lambda{sub s} implies maximal permeabilities and smallest H{sub c} and H{sub cw}. Among all the Fe-V films, the Fe{sub 92}V{sub 8} film has the optimal magnetic and electrical properties for application.

36 MATERIALS SCIENCE↗

Specular electron scattering at single-crystal Cu(001) surfaces

Epitaxial copper layers, 20 nm to 1.5-{mu}m-thick, were grown on MgO(001) by ultrahigh vacuum magnetron sputter deposition at 80 deg. C. In situ electrical resistivity measurements indicate partial specular scattering at the Cu vacuum interface with a Fuchs-Sondheimer scattering parameter p=0.6{+-}0.1. In situ deposition of 0.3 to 7.0-nm-thick Ta cap layers on the Cu surfaces leads to a resistivity increase, which is independent of the Ta thickness and is associated with a transition to completely diffuse surface scattering with p=0.0{+-}0.1. The diffuse scattering is attributed to a 'rough' electron potential at the Cu-Ta interface as well as to scattering into localized interface and surface states.

36 MATERIALS SCIENCE↗

Magnetic softness and high-frequency characteristics of Fe{sub 65}Co{sub 35}-O alloy films

The effects of oxygen concentration and film thickness were studied on the microstructural, electrical, and magnetic properties of Fe{sub 65}Co{sub 35}-O alloy films prepared by dc magnetron sputtering at room temperature. The films showed the best magnetic softness with a large saturation magnetization of 21.5 kG, low coercivities of 2.8 and 2.1 Oe in easy and hard axes, respectively, and a high resistivity of 2215 muOMEGA cm at an optimized condition of an oxygen gas flow ratio of 1.0% and a film thickness of 105 nm. Such an excellent magnetic softness can be attributed to grain refinement caused by the addition of very low dose of oxygen, which basically did not lead to the full formation of Fe and/or Co oxide phases with low saturation magnetizations. The microwave permeability measurement indicated that the addition of very low dose of oxygen could improve the response of real permeability to frequency. A high real permeability of 525 at frequency up to 1.2 GHz was obtained for the Fe{sub 65}Co{sub 35}-O films deposited at the optimized condition above.

36 MATERIALS SCIENCE↗

Temperature dependence of the optical properties of AlInN

Measurements of the temperature dependence of transmission have been carried out on AlInN thin films grown by reactive radio-frequency magnetron sputtering on (0001) sapphire substrates. By following a detailed procedure developed for analyzing the transmission spectra, we obtained more reliable data for the effects of temperature on the optical properties of AlInN. Two sets of temperature and photon-energy dependence of empirical formulas have been established for the absorption coefficient, bandgap, Urbach bandtail, and refractive index, which not only unify various experimental data reported in the literature but also provide a database of the optical properties of AlInN based on experimental results. It was found that the shift in the temperature dependence of the bandgap increases with the Al content and that the Urbach bandtail parameter is closely related to the structural characteristics of the AlInN thin films. These optical properties provide an experimental basis for further theoretical investigation and the design of AlInN-based devices.

36 MATERIALS SCIENCE↗

Charging effect and capacitance modulation of Ni-rich NiO thin film

In this letter, Ni-rich NiO thin film is deposited on p-type Si substrate by dc magnetron sputtering to form a metal-insulator-semiconductor structure. The charge trapping in the Ni nanocrystals (nc-Ni) embedded in NiO matrix induces a flatband voltage shift and capacitance modulation, which could be used for memory applications. The charging of nc-Ni depends on the voltage polarity, as well as the charging time and magnitude of gate voltage. The capacitance modulation can be described by an equivalent circuit model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Energy transfer and 1.54 {mu}m emission in amorphous silicon nitride films

Er-doped amorphous silicon nitride films with various Si concentrations (Er:SiN{sub x}) were fabricated by reactive magnetron cosputtering followed by thermal annealing. The effects of Si concentrations and annealing temperatures were investigated in relation to Er emission and excitation processes. Efficient excitation of Er ions was demonstrated within a broad energy spectrum and attributed to disorder-induced localized transitions in amorphous Er:SiN{sub x}. A systematic optimization of the 1.54 {mu}m emission was performed and a fundamental trade-off was discovered between Er excitation and emission efficiency due to excess Si incorporation. These results provide an alternative approach for the engineering of sensitized Si-based light sources and lasers.

36 MATERIALS SCIENCE↗

Enhancement in ordering of Fe{sub 50}Pt{sub 50} film caused by Cr and Cu additives

A 100-nm-thick Fe{sub 50}Pt{sub 50} film with high coercivity was fabricated by magnetron sputtering. On introducing a Cr top/bottom layer, the ordering temperature (T{sub or}) of the film decreased considerably from 500 to 380 deg. C. On introducing both Cr top/bottom layer and a 0.2-nm-thick Cu interlayer, the T{sub or} decreased even further to 340 deg. C. During the annealing process, the number of Cr atoms diffused into the Fe{sub 50}Pt{sub 50} layer increased. This increased the Fe diffusivity, lowering the T{sub or} in the process. The diffusion of the additive and the effects of annealing were verified by selected-area electron diffraction observations and by investigating the temperature dependence of the magnetization. The superlattice structure of the ordered Fe{sub 50}Pt{sub 50} film containing Cr and Cu additives was confirmed by the transmission electronic microscopy. Because of the Cr and Cu additives, the average grain size in the ordered Fe{sub 50}Pt{sub 50} film increased slightly; however, the coercivity of the ordered Fe{sub 50}Pt{sub 50} film is improved considerably.

36 MATERIALS SCIENCE↗

Concentration dependence of the Er{sup 3+} visible and infrared luminescence in Y{sub 2-x}Er{sub x}O{sub 3} thin films on Si

Y{sub 2-x}Er{sub x}O{sub 3} thin films, with x varying between 0 and 0.72, have been successfully grown on crystalline silicon (c-Si) substrates by radio-frequency magnetron cosputtering of Y{sub 2}O{sub 3} and Er{sub 2}O{sub 3} targets. As-deposited films are polycrystalline, showing the body-centered cubic structure of Y{sub 2}O{sub 3}, and show only a slight lattice parameter contraction when x is increased, owing to the insertion of Er ions. All the films exhibit intense Er-related optical emission at room temperature both in the visible and infrared regions. By studying the optical properties for different excitation conditions and for different Er contents, all the mechanisms (i.e., cross relaxations, up-conversions, and energy transfers to impurities) responsible for the photoluminescence (PL) emission have been identified, and the existence of two different well-defined Er concentration regimes has been demonstrated. In the low concentration regime (x up to 0.05, Er-doped regime), the visible PL emission reaches its highest intensity, owing to the influence of up-conversions, thus giving the possibility of using Y{sub 2-x}Er{sub x}O{sub 3} films as an up-converting layer in the rear of silicon solar cells. However, most of the excited Er ions populate the first two excited levels {sup 4}I{sub 11/2} and {sup 4}I{sub 13/2}, and above a certain excitation flux a population inversion condition between the former and the latter is achieved, opening the route for the realization of amplifiers at 2.75 mum. Instead, in the high concentration regime (Er-compound regime), an increase in the nonradiative decay rates is observed, owing to the occurrence of cross relaxations or energy transfers to impurities. As a consequence, the PL emission at 1.54 mum becomes the most intense, thus determining possible applications for Y{sub 2-x}Er{sub x}O{sub 3} as an infrared emitting material.

36 MATERIALS SCIENCE↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combinatorial investigation of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC

We have synthesized thin films of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC by combinatorial method on TiC (111) seed layers grown on c-axis sapphire (Al{sub 2}O{sub 3}) substrates at 900 deg. C using magnetron sputter. X-ray diffraction showed the films to be c-axis oriented and epitaxial, and films contained a minor secondary phase of (Ti,Nb)C, irrespective of stoichiometry. Most notably, Raman spectroscopy suggest a sizable increase in the elastic modulus in the Nb-rich region as compared to either of the end members.

36 MATERIALS SCIENCE↗