Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Microstructure, magnetic and microwave absorptive behavior of doped W-type hexaferrite nanoparticles prepared by co-precipitation method

Highlights: • High frequency properties of substituted W-type Sr-hexaferrite. • Saturation magnetization of samples is decreased with increasing of dopants content. • The ferrite sample covers about 6 GHz of bandwidth in K{sub u} band. • The optimum substituted samples can be used as a potential magnetic loss material. • Sample contain x = 0.4 of dopants have shown greater than 90% of reflection loss. - Abstract: Substituted W-type hexaferrite nanoparticles of SrZn{sub 2−x}Co{sub x/2}Ni{sub x/2}Fe{sub 16}O{sub 27} were synthesized by a chemical co-precipitation method. The X-ray diffraction results confirmed that W-type ferrite was identified as the main phase in whole samples in the range of x = 0–0.4. According to magnetic hysteresis loops, with increasing of substituted cations, saturation of magnetization increased and coercivity decreased due to crystalline site occupation of Zn with Ni and Co cations. The microwave reflection loss analysis results in the K{sub u} band (12–18 GHz) show that the highest value of reflection loss of samples was −29.11 dB at frequency of 14.57 GHz with an absorption bandwidth of more than 6 GHz by choosing reflection loss value of −10 dB as a reference. The results indicate that, the sample with appropriate amount of substituted cations hold great promise for microwave device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Magnetic ordering induced by interladder coupling in the spin-1/2 Heisenberg two-leg ladder antiferromagnet C 9 H 18 N 2 CuBr 4

In this article, we present specific-heat and neutron-scattering results for the S=1/2 quantum antiferromagnet (dimethylammonium)(3,5-dimethylpyridinium)CuBr 4 . The material orders magnetically at T N =1.99(2) K, and magnetic excitations are accompanied by an energy gap of 0.30(2) meV due to spin anisotropy. The system is best described as coupled two-leg spin-1/2 ladders with the leg exchange J leg =0.60(2) meV, rung exchange J rung =0.64(9) meV, interladder exchange J int =0.19(2) meV, and an interaction-anisotropy parameter λ=0.93(2), according to inelastic neutron-scattering measurements. In contrast to most spin ladders reported to date, the material is a rare example in which the interladder coupling is very near the critical value required to drive the system to a Néel-ordered phase without the assistance of a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

Alteration of municipal solid waste incineration bottom ash focusing on the evolution of iron-rich constituents

Municipal solid waste incineration (MSWI) bottom ash contains a considerable amount of Fe-rich constituents. The behaviors of these constituents, such as dissolution and precipitation, are quite important as they regulate the distribution of a series of ions between the liquid (percolated fluid) and solid (ash deposit) phases. This paper studied both fresh and weathered MSWI bottom ash from the mineralogical and geochemical viewpoint by utilizing optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX), and powder X-ray diffraction. The analysis results revealed that for the fresh bottom ash, iron preferentially existed in the chemical forms of spinel group (mainly Fe{sub 3}O{sub 4}, and a series of Al- or Ti- substituted varieties), metallic inclusions (including Fe-P, Fe-S, Fe-Cu-Pb), hematite (Fe{sub 2}O{sub 3}) and unburned iron pieces. In the 1-20 years weathered bottom ash collected from a landfill site, interconversions among these Fe-rich constituents were identified. Consequently, numerous secondary products were developed, including goethite ({alpha}-FeOOH), lepidocrocite ({gamma}-FeOOH), hematite, magnetite, wustite (FeO), Fe-Si-rich gel phase. Of all these transformation products, hydrous iron oxides were the most common secondary minerals. Quantitative chemical analysis of these secondary products by SEM/EDX disclosed a strong association between the newly formed hydrous iron oxides and heavy metals (e.g. Pb, Zn, Ni, and Cu). The results of this study suggest that the processes of natural weathering and secondary mineralization contribute to reduction of the potential risks of heavy metals to the surrounding environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Dual Phase Soft Magnetic Laminates for Low-cost, Non/Reduced-Rare-Earth Containing Electrical Machines

To accelerate the mass market adoption of electric drive vehicles, the key technology barriers in electric motors are (1) magnet cost and rare-earth element price volatility; (2) non-rare-earth electric motor performance; and (3) materials property optimization. The goal of this project was to address these barriers by advancing a unique and innovative dual phase soft magnetic material technology and demonstrating the material in a 30-kW synchronous reluctance motor without using any permanent magnet for electric vehicles. Dual phase magnetic materials offer the electric motor designer the ability to locally control the magnetic saturation level in a motor laminate, while at the same time enhancing the mechanical strength of the laminate material, resulting in an enhancement in motor performance and efficiency. Scalable dual phase soft magnetic laminates manufacturing technologies were developed in collaboration with multiple US manufacturers. 1000 lbs of alloy sheet with a thickness of 0.25mm and width of 280 mm was manufactured within the specifications. Batch sizes of up to 240 laminates per run were produced from the alloy sheet. Two prototype motors with dual phase soft magnetic laminates were designed, built, and tested. The major goal of building the subscale prototype as a pathway to develop scalable manufacturing technologies for the dual phase soft magnetic laminates was met. The additional goal of building and testing the subscale prototype in order to validate the calculated performance with the tested motor performance was also met. For the full-scale 30kW continuous power synchronous reluctance motor prototype, the tested performance met the targets in terms of continuous power at the operating speeds up to 8000 rpm. Post-test studies were conducted and the root causes for the discrepancy between the predicted and tested peak power, continuous power at high speed range, and efficiency were identified. Further modeling study showed that the dual phase rotor machine has a 27% higher torque to active weight ratio than an equivalent performance silicon steel rotor machine. Application space and multiple discussions with traction motor and electric vehicle manufacturers for commercialization of the dual phase soft magnetic material technology were identified and conducted. An initial cost model was established based on the developed manufacturing technologies with the US manufacturers. Future paths for further cost reduction were identified, including increasing the market volume by broadening the applications of the dual phase soft magnetic laminate technology for electric machines in other energy sections such as oil & gas, heating, ventilation, and air conditioning (HVAC), and power generation.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2018

Progress in Critical Current Density (J{sub c}) in Sintered MgB{sub 2} Bulks

The present paper focuses on methods of further improving the flux pinning and critical current density of disk-shaped MgB{sub 2} bulk superconductors by adding excess Mg metal in combination with an optimum silver content and optimized processing conditions. Bulk MgB{sub 2} samples were produced by in situ solid-state reaction in Ar gas ambient using high purity commercial powders of Mg metal and 1.5 wt% carbon-coated amorphous B powders mixed in a fixed ratio of Mg/B = 1.1:2. Further, 4 wt% silver was added to improve flux pinning as well as mechanical performance of the bulk MgB{sub 2} material. The magnetization measurements confirmed a sharp superconducting transition with T{sub c,onset} at around 37 K, which is only by 1 K lower than in bulk MgB{sub 2} material produced without carbon-coated amorphous boron. The critical current density (J{sub c}) values significantly improved in the MgB{sub 2} material with 4 wt% of silver and 1.5 wt% of carbon-coated amorphous boron, sintered at 775 {sup ∘}C for 3 h. At 20 K, this sample showed J{sub c} at around 500 and 350 kA/cm{sup 2} in the self-field and 1 T, respectively, which makes it suitable for several industrial applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Spin counting in electrically detected magnetic resonance via low-field defect state mixing

The work herein describes a method that allows one to measure paramagnetic defect densities in semiconductor and insulator based devices with electrically detected magnetic resonance (EDMR). The method is based upon the mixing of defect states which results from the dipolar coupling of paramagnetic sites at low magnetic fields. We demonstrate the measurement method with spin dependent tunneling in thin film dielectrics; however, the method should be equally applicable to paramagnetic defect density measurements in semiconductors via the more commonly utilized EDMR technique called spin dependent recombination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Reversible Control of Interfacial Magnetism through Ionic-Liquid-Assisted Polarization Switching

The ability to control magnetism of materials via electric field enables a myriad of technological innovations in information storage, sensing, and computing. In this paper, we use ionic-liquid-assisted ferroelectric switching to demonstrate reversible modulation of interfacial magnetism in a multiferroic heterostructure composed of ferromagnetic (FM) La 0.8 Sr 0.2 MnO 3 and ferroelectric (FE) PbZr 0.2 Ti 0.8 O 3 . It is shown that ionic liquids can be used to persistently and reversibly switch a large area of a FE film. Finally, this is a prerequisite for polarized neutron reflectometry (PNR) studies that are conducted to directly probe magnetoelectric coupling of the FE polarization to the interfacial magnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites

Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (T, pO{sub 2}) necessary to obtain the desired phase and stoichiometry. These methods have been evaluated for nanometric titanium ferrites. Two phenomena have been observed during the reducing process: the precipitation of a rhombohedral phase and a significant grain growth linked together. - Graphical abstract: XRD patterns of Fe{sub 3(1-{delta})}O{sub 4} nanometric powders obtained in situ during a reducing treatment. The stoichiometric compound was obtained by a thermal annealing at 460 deg. C under pO{sub 2}=3x10{sup -26} Pa ({Phi}{sub DRX}=100 nm). In inset, data of the experimental lattice parameter compared to the theoretical one. {alpha} represents the rhomboedrical phase which precipitates during this thermal treatment, then disappeared. Highlights: > The control of the deviation from oxygen stoichiometry is rarely consider in literature. > At the nanometric scale, it is necessary to develop synthesis routes under appropriate atmosphere. > These synthesis must be coupled with in situ characterization tools. > It opens the door to fast and precise studies concerning the evolution of nanometric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Preparation, characterization and millimetre wave attenuation performance of carbon fibers coated with nickel-wolfram-phosphorus and nickel-cobalt-wolfram- phosphorus

Highlights: • SEM, XRD, EDS and MMW attenuation performances of alloys coated CFs were studied. • Resistivity and P content in alloys were main factors on MMW attenuation property. • The weight gain of coated CFs has effects on the MMW attenuation performance. - Abstract: Carbon fibers (CFs) coated with Ni–X–P (X = W, Co–W or none) alloys were prepared by electroless plating. The morphology, crystal structure, and element composition of alloy-coated CFs were characterized by scanning electron microscopy, X-ray diffractometry, energy-dispersive spectrometry and microwave attenuation. The results showed that CFs were coated with a layer of alloy particles. P content in Ni–Co–W–P or Ni–W–P alloys was lower than that in Ni–P alloy, and coating alloy Ni–P was amorphous. After W or Co introduction, coating alloys exhibited crystal characteristics. MMW-attenuation performance analysis showed that the 3 mm wave attenuation performance of CFs/Ni–Co–W–P, CFs/Ni–W–P and CFs/Ni–P increased by 7.27 dBm, 4.88 dBm and 3.55 dBm, and the 8 mm wave attenuation effects increased by 11.61 dBm, 6.11 dBm, and 4.06 dBm respectively, compared with those of CFs. MMW-attenuation performance is attributable to the sample bulk resistivity and P content in the alloy. Moreover, an optimal weight gain value existed for the MMW-attenuation performance of alloy-coated CFs.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Large Scale Magnetostrictive Valve Actuator

Marshall Space Flight Center's Valves, Actuators and Ducts Design and Development Branch developed a large scale magnetostrictive valve actuator. The potential advantages of this technology are faster, more efficient valve actuators that consume less power and provide precise position control and deliver higher flow rates than conventional solenoid valves. Magnetostrictive materials change dimensions when a magnetic field is applied; this property is referred to as magnetostriction. Magnetostriction is caused by the alignment of the magnetic domains in the material s crystalline structure and the applied magnetic field lines. Typically, the material changes shape by elongating in the axial direction and constricting in the radial direction, resulting in no net change in volume. All hardware and testing is complete. This paper will discuss: the potential applications of the technology; overview of the as built actuator design; discuss problems that were uncovered during the development testing; review test data and evaluate weaknesses of the design; and discuss areas for improvement for future work. This actuator holds promises of a low power, high load, proportionally controlled actuator for valves requiring 440 to 1500 newtons load.

Richard, James A.↗
DOE OSTI2013

Multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles: Aqueous solution preparation, characterization and photocatalytic activity

Highlights: ► Ag-loaded Fe{sub 3}O{sub 4}@C magnetic-optical bifunctional materials have been investigated. ► The magnetism was studied at the room temperature. ► The photocatalytic activity was evaluated under visible light irradiation. ► Ag-loaded Fe{sub 3}O{sub 4}@C nanocomposites show superior magnetism and photocatalytic activity. ► A simple synthetic process was discussed. - Abstract: The paper describes a kind of multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles, which can be successfully synthesized using a simple route based on directly adsorption and spontaneous reduction of silver ions onto the surface shell of carbon-coated magnetic nanoparticles. The as-prepared samples have been characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrum, vibrating sample magnetometer (VSM) and UV–vis spectrum (UV–vis). The Ag nanocrystals loaded on the surface shell of carbon-coated magnetic nanoparticles are nearly spherical with an average diameter of 10 nm. And the carbonaceous polysaccharides shell obtained using an glucose hydrothermal reaction act as a role of a bridge between magnetic Fe{sub 3}O{sub 4} core and noble metallic Ag nanocrystals. The as-prepared samples can be used as an effective catalyst for the photodegradation of organic dyes (neutral red) under the exposure of visible light. Results show that the as-prepared samples have a degradation rate of 93.7% for dyes within 30 min, which indicates their high-efficiency and rapid photocatalytic activity.

36 MATERIALS SCIENCE↗
DOE OSTI2019

First-principles Study of Strain-Induced Magnetism in Defective Arsenene

By using first-principles calculations, we explore the influences of tensile strain on the magnetic properties of a defective arsenene monolayer with mono-vacancy and di-vacancy. Calculation results show that unstrained defective arsenene monolayers both are intrinsically nonmagnetic. However, appropriate tensile strains can induce a ferromagnetic coupling in mono-vacancy- (8%) and di-vacancy-doped systems (7%), respectively. In addition, we also discussed the physical mechanism of strain-induced magnetism emergence and predicted a possibility of magnetism appearance in the experiment. Our study may provide insight for the design of memory-switching spintronic devices with metal-free magnetism by using arsenene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Microscopic magnetic properties of an oxygen-doped Tb-Fe thin film by magnetic Compton scattering

The magnetic Compton scattering of a Tb{sub 32}Fe{sub 55}O{sub 13} film was measured in order to investigate the microscopic magnetization processes (i.e., the spin moment, orbital moment, and element specific moments). The trend of the spin magnetic moment was the same as that of the total magnetic moment but opposite to the orbital magnetic moment. In the low magnetic field region, the magnetic moments were not perfectly aligned perpendicular to the film surface, and the perpendicular components were found to mainly arise from the magnetic moment of Tb. Oxygen atoms hinder long range magnetic interaction and hence also affect the magnetization process of the magnetic moments of Tb and Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Enhanced magnetic behavior, exchange bias effect, and dielectric property of BiFeO{sub 3} incorporated in (BiFeO{sub 3}){sub 0.50} (Co{sub 0.4}Zn{sub 0.4}Cu{sub 0.2} Fe{sub 2}O{sub 4}){sub 0.5} nanocomposite

Nanoparticles of BiFeO{sub 3} (BFO) are incorporated in the nanocomposite of (BiFeO{sub 3}){sub 0.50} (Co{sub 0.4}Zn{sub 0.4}Cu{sub 0.2} Fe{sub 2}O{sub 4}){sub 0.5}, (BFO-CZCF) and these are prepared by chemical route. The formation of pure crystallographic phase of each component (BFO and CZCF) in the nanocomposite of BFO-CZCF has been confirmed by Rietveld analysis of the X-ray diffractograms using FULLPROF program. Morphology, average particle size and its distribution, crystallographic phase etc. are obtained from the high-resolution transmission electron microscopy of BFO-CZCF. Magnetic measurements of BFO-CZCF have been carried out to explore the modulation of magnetic behavior of BFO in BFO-CZCF. Interestingly, magnetization of BFO-CZCF has been drastically enhanced compared to that of the pristine BFO. An exchange bias effect is also observed in the M vs. H loops of BFO-CZCF recorded in field cooled and zero field cooled conditions, which suggest that nanoparticles of BFO (AFM) are encapsulated by nanoparticles of CZCF (FM) in BFO-CZCF. Thermal variation of dielectric constant of BFO-CZCF is recorded in the range of 300 to 1073 K and a ferroelectric to paraelectric transition is observed at ∼728 K. Enhanced magnetic property of BFO would quite interesting for this important multiferroic.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electronic noise of a single skyrmion

To enable the practical use of skyrmion-based devices, it is essential to achieve a balance between energy efficiency and thermal stability while also ensuring reliable electrical detection against noise. Understanding how a skyrmion interacts with material disorder and external perturbations is thus essential. Here, we investigate the electronic noise of a single skyrmion under the influence of thermal fluctuations and spin currents in a magnetic thin film. We detect the thermally induced noise with a 1/ƒ $\gamma$ signature in the strong pinning regime but a random telegraph noise in the intermediate pinning regime. Both the thermally dominated and current-induced telegraphlike signals are detected in the weak pinning regime. Our results provide a comprehensive electronic noise picture of a single skyrmion, demonstrating the potential of noise fluctuation as a valuable tool for characterizing the pinning condition of a skyrmion. In conclusion, these insights could also aid in the development of low-noise and reliable skyrmion-based devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A Review of the Mechanical Properties of Materials Used in Nb 3 Sn Magnets for Particle Accelerators

Superconducting magnets experience significant thermo-mechanical loads throughout their life cycle. These are introduced by the electro-magnetic forces during powering, but also by the prestress applied in many magnet designs. Further to this, the large thermal excursion that components of different materials experience can generate significant internal forces. The loads are also experienced by the superconducting coils, whose critical current can decrease as a consequence of the applied strain. It is then crucial to predict the overall mechanical behavior and conservatively design a magnet, avoiding failure of the mechanical components and of the superconducting coils. Finite Element Analysis (FEA) is generally used to perform these tasks, but its results rely heavily on the material properties and models used. This is in particular true for the coil composite, which is simplified to allow reasonable model sizes in full magnet models. Here we present the state-of-art knowledge of the mechanical properties of the materials mostly used in superconducting magnet construction. We review elastic and plastic properties at room and cryogenic temperature, thermal contraction, and summarize the state-of-art failure criteria for these materials. Finally, the paper summarizes the present understanding of the mechanical behavior and limits of Nb3Sn coils. For the first time, an orthotropic failure criteria is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

Nanocrystalline ferrites Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4}: Influence of cation distribution on acidic and gas sensing properties

This work is devoted to a detailed analysis of the interconnection between composition, cation distribution and acidic properties of the surface of nanocrystalline ferrites Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4} obtained by aerosol pyrolysis. The detailed analysis of the Moessbauer spectra allows us to determine the distribution of cations between tetrahedral and octahedral positions in spinel structure. Depending on samples composition, the tetrahedral positions can be occupied by only Fe{sup 3+} cations (inverse spinel, x{>=}0.4) or by Fe{sup 3+} and Zn{sup 2+} cations (mixed spinel, x=0, 0.2). Increasing the nickel concentration in the ferrite leads to decrease in the number of strong acid centers on the surface. It was found that the decrease in the contribution of strong surface acid sites leads to an increase in sensory sensitivity of the ferrite towards ammonia. For ethanol detection an inverse relationship between sensor signal and surface acidity was observed. - Graphical abstract: (a) n- and p-types change in electrical resistance and (b) sensor signal of Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4} towards NH{sub 3} and ethanol vapor vs. the part of strong acid sites. Highlights: > Relationship between composition, cation distribution, and acidity in nanocrystalline Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4}. > Degree of inversion of spinel is determined by Moessbauer spectroscopy. > Increase of nickel content leads to decrease in the number of strong acid centers. > This results in an increase in sensory sensitivity of the ferrite towards ammonia. > Relationship between sensor signal to ethanol and surface acidity is opposite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Synthesis of kaolin supported nanoscale zero-valent iron and its degradation mechanism of Direct Fast Black G in aqueous solution

Graphical abstract: UV–visible spectra of DFBG solution using K-nZVI (1:1) nanoparticles. (a) Before reaction; (b) during reaction; (c) after reaction. - Highlights: • Kaolin-supported Fe{sup 0} nanoparticle (K-nZVI) was synthesized. • Degradation of Direct Fast Black by K-nZVI was studied. • K-nZVI was characterized by SEM, XRD, UV and FIIR. • Degradation mechanism of Direct Fast Black was proposed. - Abstract: Calcinated kaolin supported nanoscale zero-valent iron (K-nZVI) was synthesized and used for the removal of tetrad azo-group dye-Direct Fast Black G (DFBG) from aqueous solution. The results demonstrated that after reacting for 10 min with an initial concentration of DFBG 100 mg L{sup −1} (pH 9.49), 78.60% of DFBG was removed using K-nZVI, while only 41.39% and 12.56% of DFBG were removed using nZVI and kaolin, respectively. K-nZVI with a mass ratio of nZVI nanoparticles versus kaolin at 1:1 was found to have a high degree of reactivity. Furthermore, scanning electron microscopy (SEM) confirmed that nZVI was better dispersed when kaolin was present. XRD patterns indicated that iron oxides were formed after reaction. Fourier transforms infrared spectra (FTIR) and UV–visible demonstrated that the peak in the visible light region of DFBG was degraded and new bands were observed. Kinetics studies showed that the degradation of DFBG fitted well to the pseudo first-order model. The degradation of DFBG by K-nZVI was based on its adsorption onto kaolin and iron oxides, and subsequently reduction using nZVI was proposed. A significant outcome emerged in that 99.84% of DFBG in wastewater was removed using K-nZVI after reacting for 60 min.

36 MATERIALS SCIENCE↗