Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELD CONFIGURATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

The dependence of divertor power sharing on magnetic flux balance in near double-null configurations on Alcator C-Mod

Management of power exhaust will be a crucial task for tokamak fusion reactors. Reactor concepts are often proposed with double-null divertors, i.e. having two magnetic separatrices in an up-down symmetric configuration. This arrangement is potentially advantageous since the majority of the tokamak exhaust power tends to flow to the outer pair of divertor legs at large major radius, where the geometry is favorable for spreading the heat over a large surface area and there is more room for advanced divertor configurations. Despite the importance, there have been relatively few studies of divertor power sharing in near double null configurations and no studies at the poloidal magnetic fields and scrape-off layer power widths anticipated for a reactor. Motivated by this need we have undertaken a systematic study on Alcator C-Mod, examining the effect of magnetic flux balance on the power sharing among the four divertor legs in near double-null plasmas. Ohmic L-modes at three values of plasma current and ICRF-heated enhanced D-alpha (EDA) H-modes and I-modes at a single value of plasma current are explored, producing poloidal magnetic fields of 0.42, 0.62 and 0.85 Tesla. For Ohmic L-modes and ICRF-heated EDA H-modes, we find that the point of equal power sharing between upper and lower divertors occurs remarkably close to a balanced double null. Power sharing amongst the outer (upper versus lower) and inner (upper versus lower) pairs of divertors can be described in terms of a logistic function of magnetic flux balance, consistent with heat flux mapping along magnetic field lines to the outer midplane. Power sharing between inner and outer legs is found to follow a Gaussian-like function of magnetic flux balance with non-zero power to the inner divertors at double null. The overall behavior of H-modes operated near double null and for I-modes operating to within one heat flux e-folding of double null are found similar to Ohmic L-modes, with a significant reduction of power on the inner divertor legs. The results are encapsulated in terms of empirically-informed analytic functions of magnetic flux balance. When combined with magnetic equilibrium control system specifications, these relationships can be used to specify the power flux handling requirements for each of the four divertor target plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetosphere structure and radiation mechanisms of pulsars

A presentation is made of the two main models of the radiation mechanism of pulsars: the light cylinder model and the polar cap model. They have to account for gamma radiation, radio and X-ray emission, and in the case of the Crab pulsar, optical radiation. It is hypothesized that pair creation is essential for radio emission. None of the models yields a theoretical pulse-width-period distribution or braking index that correlates well with observations. A revision of the polar cap model suggests that a glitch may be present in the magnetosphere, necessitating the presence of a large centrifugal force strong enough to tear open the magnetic field lines into a Y-type configuration. This model yields a braking index in line with observations.

Roberts, D. H.↗

Evolving force-free magnetic fields. III - States of nonequilibrium and the preflare stage

The paper considers whether a neighboring magnetostatic equilibrium exists to allow a magnetic field initially in a force-free configuration to accommodate any imposed weak pressure. The following problem is treated. The foot points of the field are fixed and the plasma is frozen into the field lines under the approximation of infinite electrical conductivity. A weak pressure is introduced. It is determined infinitesimal plasma displacements exist to adjust the field lines to a new equilibrium without changing the field line connectivity. The analysis is carried out for the bipolar force-free fields forming one of two evolutionary sequences modeling the development of the preflare stage. It was found that for the force-free field corresponding to the quasi-static stage of evolution, the neighboring magnetostatic equilibrium always exists and the imposed gas pressure can be accommodated with a slight departure of the field from being exactly force free.

Low, B. C.↗

New outlook on control of crystalline and chemical perfection during growth of silicon

Significant progress has been made in our understanding of the Czochralski crystal growth process with the realization that the incorporation of oxygen into silicon is directly related to the internal gettering capability of wafers during device fabrication. It was also recognized that the electronic properties exhibited by silicon during various stages of device fabrication were significantly affected by the thermal history of the silicon during the post-growth cool-down period. Turbulent melt convection, induced by unavoidable destabilizing thermal gradients, was found to interfere with homogeneous dopant (and oxygen) incorporation and to influence markedly the dynamics of nonequilibrium point defects in the solidified silicon matrix during the cool-down period. In view of the unavoidability of destabilizing thermal gradients in conventional crystal growth configurations, melt stabilization through the application of magnetic fields is generally considered a viable approach. Control of heat input to the melt through heat pipe systems, as used during growth of germanium, cannot be applied to industrial growth of silicon. Recent studies have shown that heat exchange systems located coaxially about a growing crystal can be used to stabilize and control not only heat transfer in the grown crystal, but also in the melt adjacent to the solidification interface.

Witt, A. F.↗

Rotation of the coronal magnetic field

The coronal magnetic field rotates differently than the photosphere. The field configuration of the corona can be calculated from the observed photosphpere field using a potential field model. Correlation of the field patterns at different latitudes with a lag near one solar rotation shows much less differential rotation than observed in the photospheric field; however, the peak is very broad and determines the rotation rate rather poorly. Consideration of longer lags reveals a more complex rotational structure and indicates different rotation rates in the Northern and Southern Hemispheres. Spectral analysis of the equatorial dipole component of the coronal field reveals an organization into just a few discrete rotation frequencies which are apparently present simultaneously. Spectral analysis of the field at different latitudes shows that the frequencies are present simultaneously. Spectra analysis of the field at different latitudes shows that the frequencies are present simultaneously, but in different hemispheres, and that the Southern Hemisphere fields rotate more slowly than those in the north in solar cycle 21.

Hoeksema, J. T.↗

The horse-collar aurora - A frequent pattern of the aurora in quiet times

The frequent appearance of the 'horse-collar aurora' pattern in quiet-time DE 1 images is reported, presenting a two-hour image sequence that displays the basic features and shows that it sometimes evolves toward the theta configuration. There is some evidence for interplanetary magnetic field B(y) influence on the temporal development of the pattern. A preliminary statistical analysis finds the pattern appearing in one-third or more of the image sequences recorded during quiet times.

Hones, E. W., Jr.↗

The magnetic topology of the plasmoid flux rope in a MHD-simulation of magnetotail reconnection

On the basis of a 3D MHD simulation, the magnetic topology of a plasmoid that forms by a localized reconnection process in a magnetotail configuration (including a net dawn-dusk magnetic field component B sub y N is discussed. As a consequence of B sub y N not equalling 0, the plasmoid assumes a helical flux rope structure rather than an isolated island or bubble structure. Initially all field lines of the plasmoid flux rope remain connected with the earth, while at later times a gradually increasing amount of flux tubes becomes separated, connecting to either the distant boundary or to the flank boundaries. In this stage, topologically different flux tubes become tangled and wrapped around each other, consistent with predictions on the basis of an ad hoc plasmoid model.

Birn, J.↗

The Three-Dimenstional Solar Wind at Solar Activity Minimum

In late 1997, the Ulysses spacecraft completed its first orbit around the Sun, observing the properties of the heliosphere at all latitudes between 80 degrees South and 80 degrees North. Because the mission occurred during a period of near-minimum solar activity, the configuration of the solar wind and interplanetary magnetic field were particularly simple, thus allowing confident comparisons between the properties of the polar corona observed by instruments of the Spartan and SOHO spacecraft and the resulting properties of the solar wind.

Solar Wind Ulysses Solar Activity polar corona↗

Composition of Upstream Flow for Titan's Interaction with Saturn's Magnetosphere during T9 Flyby

As described in Bertucci et al. [2007] Saturn's magnetic field is stretched out into a magnetodisk configuration where the field is confined near the equatorial plane with Titan below the current sheet. As discussed in Maurice et al. [1996] for Jupiter's outer magnetosphere where magnetodisk configuration applies the heavy ions are confined within 2 deg of the current sheet and at higher latitudes protons dominate. We show compositional evidence from the Cassini Plasma Spectrometer (CAPS) Ion Mass Spectrometer (IMS) that protons dominate the ion composition for the upstream flow, while in pickup region H2+ and protons dominate. If true, then we expect a far different interaction between Saturn's magnetosphere and Titan's upper atmosphere and exosphere, where heavy ions are essentially absent.

Sittler, Edward C.↗

Static Measurements on HTS Coils of Fully Superconducting AC Electric Machines for Aircraft Electric Propulsion System

The NASA Glenn Research Center (GRC) has been developing the high efficiency and high-power density superconducting (SC) electric machines in full support of electrified aircraft propulsion (EAP) systems for a future electric aircraft. A SC coil test rig has been designed and built to perform static and AC measurements on BSCCO, (RE)BCO, and YBCO high temperature superconducting (HTS) wire and coils at liquid nitrogen (LN2) temperature. In this paper, DC measurements on five SC coil configurations of various geometry in zero external magnetic field are measured to develop good measurement technique and to determine the critical current (Ic) and the sharpness (n value) of the super-to-normal transition. Also, standard procedures for coil design, fabrication, coil mounting, micro-volt measurement, cryogenic testing, current control, and data acquisition technique were established. Experimentally measured critical currents are compared with theoretical predicted values based on an electric-field criterion (Ec). Data here are essential to quantify the SC electric machine operation limits where the SC begins to exhibit non-zero resistance. All test data will be utilized to assess the feasibility of using HTS coils for the fully superconducting AC electric machine development for an aircraft electric propulsion system.

superconducting motor↗

Structure and Dynamics of the Solar Corona

Advanced computational techniques were used to study solar coronal heating and coronal mass ejections. A three dimensional, time dependent resistive magnetohydrodynamic code was used to study the dynamic response of a model corona to continuous, slow, random magnetic footpoint displacements in the photosphere. Three dimensional numerical simulations of the response of the corona to simple smooth braiding flows in the photosphere were calculated to illustrate and understand the spontaneous formation of current filaments. Two dimensional steady state helmet streamer configurations were obtained by determining the time asymptotic state of the interaction of an initially one dimensinal transponic solar wind with a spherical potential dipole field. The disruption of the steady state helmet streamer configuration was studied as a response to shearing of the magnetic footpoints of the closed field lines under the helmet.

Schnack, D. D.↗

Simulation of the development and interaction of instabilities in a relativistic electron beam under variation of the beam wall thickness

The development and interaction of Bursian and diocotron instabilities in an annular relativistic electron beam propagating in a cylindrical drift chamber are investigated analytically and numerically as functions of the beam wall thickness and the magnitude of the external uniform magnetic field. It is found that the interaction of instabilities results in the formation of a virtual cathode with a complicated rotating helical structure and several reflection regions (electron bunches) in the azimuthal direction. It is shown that the number of electron bunches in the azimuthal direction increases with decreasing beam wall thickness and depends in a complicated manner on the magnitude of the external magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of X-ray observations of the 15 June 1973 flare in active region NOAA 131

Observations and analyses of the 1B/M3 flare of 15 June, 1973 in active region NOAA 131 (McMath 12379) are presented. The X-ray observations, consisting of broadband photographs and proportional counter data from the Skylab/ATM NASA-MSFC/Aerospace S-056 experiment, are used to infer temperatures, emission measures, and densities for the flaring plasma. The peak temperature from the spatially resolved photographs is 25,000,000 K, while the temperature from the full-disk proportional counter data is approximately 15,000,000 K. The density is 3 times 10 to the 10th/cu cm. The X-ray flare emission appears to come primarily from two low-lying curvilinear features lying perpendicular to and centered on the line where the photospheric longitudinal magnetic field is zero. Similarities in the preflare and postflare X-ray emission patterns indicate that no large-scale relaxation of the coronal magnetic configuration was observed. Also discussed are H-alpha and magnetic field observations of the flare and the active region. Finally, results of numerical calculations, including thermal conduction, radiative loss, and chromospheric evaporation, are in qualitative agreement with the decay phase observations.

Krall, K. R.↗

Galvanically split superconducting microwave resonators for introducing internal voltage bias

We present the design and performance of high-Q superconducting niobium nitride microwave resonators intended for use in hybrid quantum systems, coupling spin degrees of freedom to the cavity mode, both magnetically and electrically. We demonstrate a solution that allows to introduce static electric fields in the resonator without compromising the microwave performance. Quality factors above 10{sup 5} remain unchanged in strong applied static electric fields above 10 MV/m and magnetic fields up to ∼400 mT. By design, the configuration of the dc field matches that of the microwave field, especially advantageous for experiments on electrostatically controlled spin systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulsar extinction

The radiation properties of pulsars are reinvestigated in the context of the 'PCFB' model, according to which the radiation originates at the polar caps and the magnetic-field lines change from a closed to an open configuration at the 'force-balance' or 'corotation' radius. Major attention is given to the condition for electron-positron pair creation, which leads, in turn, to an extinction condition whereby any pulsar will cease to be a radio emitter after its period has increased beyond a certain value. This extinction condition is derived on the basis of a model where the magnetic field is the same as that of a point dipole located at the center of the star; effects of dipole distortion are also considered. A comparison of the results with observational data shows that most pulsars satisfy or nearly satisfy the pair-creation condition for undistorted dipoles and seem to satisfy the extinction condition. It is noted that pulsars which should be extinguished according to the undistorted-dipole model need not be if the magnetic field is sufficiently distorted at the polar caps.

Sturrock, P. A.↗

Interaction Forces Between Multiple Bodies in a Magnetic Field

Some of the results from experiments to determine the interaction forces between multiple bodies in a magnetic field are presented in this paper. It is shown how the force values and the force directions depend on the configuration of the bodies, their relative positions to each other, and the vector of the primary magnetic field. A number of efficient new automatic loading and assembly machines, as well as manipulators and robots, have been created based on the relationship between bodies and magnetic fields. A few of these patented magnetic devices are presented. The concepts involved open a new way to design universal grippers for robot and other kinds of mechanisms for the manipulation of objects. Some of these concepts can be used for space applications.

Joffe, Benjamin↗

Enhanced magnetic field probe array for improved excluded flux calculations on the C-2U advanced beam-driven field-reversed configuration plasma experiment

External flux conserving coils were installed onto the exterior of the C-2U [M. W. Binderbauer et al., Phys. Plasmas 22, 056110 (2015)] confinement vessel to increase the flux confinement time of the system. The 0.5 in. stainless steel vessel wall has a skin time of ∼5 ms. The addition of the external copper coils effectively increases this time to ∼7 ms. This led to better-confined/longer-lived field-reversed configuration (FRC) plasmas. The fringing fields generated by the external coils have the side effect of rendering external field measurements invalid. Such measurements were key to the previous method of excluded flux calculation [M. C. Thompson et al., Rev. Sci. Instrum. 83, 10D709 (2012)]. A new array of B-dot probes and Rogowski coils were installed to better determine the amount of flux leaked out of the system and ultimately provide a more robust measurement of plasma parameters related to pressure balance including the excluded flux radius. The B-dot probes are surface mountable chip inductors with inductance of 33 μH capable of measuring the DC magnetic field and transient field, due to resistive current decay in the wall/coils, when coupled with active integrators. The Rogowski coils measure the total change in current in each external coil (150 A/2 ms). Currents were also actively driven in the external coils. This renders the assumption of total flux conservation invalid which further complicates the analysis process. The ultimate solution to these issues and the record breaking resultant FRC lifetimes will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the performance of the Micromegas chambers for the ATLAS Muon Spectrometer Upgrade

The ATLAS collaboration at LHC has chosen the Micromegas (Micro Mesh Gaseous Structure) technology along with the small-strip Thin Gap Chambers (sTGC) for the high luminosity upgrade of the inner muon station in the high-rapidity region, the so called New Small Wheel (NSW). It employs eight layers of Micromegas detectors and eight layers of sTGC. The NSW project requires fully efficient Micromegas chambers with spatial resolution down to 100 μm in the precision coordinate for momentum reconstruction, and at mm level in the azimuthal (second) coordinate, over a total active area of 1200 m{sup 2}, with a rate capability up to about 15 kHz/cm{sup 2} and operation in a moderate magnetic field up to B = 0.4 T. The required tracking capability is provided by the intrinsic space resolution combined with a mechanical precision at the level of 30 μm along the precision coordinate. Together with the precise tracking capability the Micromegas chambers should provide a trigger signal. Several tests have been performed on small (10x10 cm{sup 2}) and large (1 x 1 m{sup 2}) size single gap chambers prototypes using high energy hadron beams at CERN, low and intermediate energy (0.5-5 GeV) electron beams at Frascati and DESY, neutron beams at Demokritos (Athens) and Garching (Munich) and cosmic rays. More recently two quadruplets with dimensions 1.2 x 0.5 m{sup 2} and the same configuration and structure foreseen for the NSW upgrade have been built at CERN and tested with high energy pions/muons beam. Results obtained in the most recent tests, in different configurations and operating conditions, in dependence with the magnetic field, will be presented, along with a comparison between different read-out electronics, either based on the APV25 chips, or based on a new digital front-end ASIC developed in its second version (VMM2) as a new prototype of the final chip that will be employed in the NSW upgrade. (authors)

43 PARTICLE ACCELERATORS↗