Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Live Aircraft Encounter Visualization at FutureFlight Central

Researchers at the National Aeronautics and Space Administration (NASA) have developed an aircraft data streaming capability that can be used to visualize live aircraft in near real-time. During a joint Federal Aviation Administration (FAA)/NASA Airborne Collision Avoidance System flight series, test sorties between unmanned aircraft and manned intruder aircraft were shown in real-time at NASA Ames' FutureFlight Central tower facility as a virtual representation of the encounter. This capability leveraged existing live surveillance, video, and audio data streams distributed through a Live, Virtual, Constructive test environment, then depicted the encounter from the point of view of any aircraft in the system showing the proximity of the other aircraft. For the demonstration, position report data were sent to the ground from on-board sensors on the unmanned aircraft. The point of view can be change dynamically, allowing encounters from all angles to be observed. Visualizing the encounters in real-time provides a safe and effective method for observation of live flight testing and a strong alternative to travel to the remote test range.

Video Streaming↗

Benchmark Problems for Space Mission Formation Flying

To provide a high-level focus to distributed space system flight dynamics and control research, several benchmark problems are suggested for space mission formation flying. The problems cover formation flying in low altitude, near-circular Earth orbit, high altitude, highly elliptical Earth orbits, and large amplitude lissajous trajectories about co-linear libration points of the Sun-Earth/Moon system. These problems are not specific to any current or proposed mission, but instead are intended to capture high-level features that would be generic to many similar missions that are of interest to various agencies.

Carpenter, J. Russell↗

Mars Aerial Regional-Scale Environmental Survey (ARES) Coordinate Systems Definitions and Transformations

The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept with the goal of taking scientific measurements of the atmosphere, surface, and subsurface of Mars by using an airplane as the payload platform. ARES team first conducted a Phase-A study for a 2007 launch opportunity, which was completed in May 2003. Following this study, significant efforts were undertaken to reduce the risk of the atmospheric flight system, under the NASA Langley Planetary Airplane Risk Reduction Project. The concept was then proposed to the Mars Scout program in 2006 for a 2011 launch opportunity. This paper summarizes the design and development of the ARES airplane propulsion subsystem beginning with the inception of the ARES project in 2002 through the submittal of the Mars Scout proposal in July 2006.

Kuhl, Christoper A.↗

Dynamics and control of a Shuttle attached antenna experiment

Study results obtained to date identify the requirements for a large space system flight experiment. This paper considers the dynamics and control of an offset feed wrap-rib antenna attached to the Shuttle for such an experiment. Results reported in this paper are primarily based on the analysis and simulation of the combined Shuttle and antenna flexible dynamics model, and the Shuttle Vernier Reaction Control Subsystem. These results establish the technical feasibility of the Shuttle attached antenna flight experiment. Static and dynamic disturbances examined do not cause significant dynamic interactions to the experiment. Shuttle Vernier jets can be used for control purpose or as controlled excitation sources for experiment. Interface between the Shuttle and the antenna can be rigid or actively decoupled depending on the experiment objective. Key large space systems control technologies such as distributed sensing and actuation, system identification, figure estimation and control, and control for slew or reconfiguration can be validated with the experiment configuration described in this paper.

Wang, S. J.↗

Ground System Architectures Workshop GMSEC SERVICES SUITE (GSS): an Agile Development Story

The GMSEC (Goddard Mission Services Evolution Center) Services Suite (GSS) is a collection of tools and software services along with a robust customizable web-based portal that enables the user to capture, monitor, report, and analyze system-wide GMSEC data. Given our plug-and-play architecture and the needs for rapid system development, we opted to follow the Scrum Agile Methodology for software development. Being one of the first few projects to implement the Agile methodology at NASA GSFC, in this presentation we will present our approaches, tools, successes, and challenges in implementing this methodology. The GMSEC architecture provides a scalable, extensible ground and flight system for existing and future missions. GMSEC comes with a robust Application Programming Interface (GMSEC API) and a core set of Java-based GMSEC components that facilitate the development of a GMSEC-based ground system. Over the past few years, we have seen an upbeat in the number of customers who are moving from a native desktop application environment to a web based environment particularly for data monitoring and analysis. We also see a need to provide separation of the business logic from the GUI display for our Java-based components and also to consolidate all the GUI displays into one interface. This combination of separation and consolidation brings immediate value to a GMSEC-based ground system through increased ease of data access via a uniform interface, built-in security measures, centralized configuration management, and ease of feature extensibility.

Software Development/Agile↗

Ka-band High-Rate Downlink System for the NISAR Mission

This paper provides a description and analyses of the high-rate Ka-band telecom system for the upcoming NISAR (NASA-ISRO Synthetic Aperture Radar) mission. NISAR is a collaborative Earth-Science mission between National Aeronautics and Space Administration (NASA) and Indian Space Research Organization (ISRO), which features an L-band SAR instrument and an S-band SAR instrument. The simultaneous dual-frequency radar system at peak rates will produce data at gigabit-per-second speeds, which drives the data-volume requirements. The key driving requirement for the payload communication subsystem is to provide a minimum of 26 Terabits per day of radar science data to the ground. The high-rate transmitter on the flight system is a software-defined radio developed at the Jet Propulsion Laboratory (JPL), based on the Universal Space Transponder platform, providing an offset quadrature phase shift key modulated waveform with Low-Density Parity-Check encoding of the data transfer frames. Two transmitters used in a dual-polarization configuration with each transmitter providing two giga-symbols per second (Gsps) of coded data provides an aggregate rate of four Gsps. In this system, only one watt of signal power is necessary on each polarization to overcome propagation losses and achieve a successful RF link. Several Near Earth Network (NEN) ground station sites (Alaska in the United States, Svalbard in Norway, and Punta Arenas in Chile) are baselined for the space-to-Earth communications link. Each ground station will also feature multiple upgrades to support NISAR’s transmission starting with new Ka-band antennas, wideband downconverters and high-rate receivers. In addition, a baseband data processor called Data Acquisition Processor and Handling Network Environment (DAPHNE), newly developed by the NEN, provides data storage and connectivity to backhaul networks. With NISAR’s large quantities of data (over 3.5 Petabytes over the mission), the processing of science data will be primarily performed on a cloud system to reduce the overall cost to the mission. The system described herein will be the first operational use of Gsps-class downlink rates on an Earth-Science mission.

Dissanayake, Asoka↗

Achieving Operability via the Mission System Paradigm

In the past, flight and ground systems have been developed largely-independently, with the flight system taking the lead, and dominating the development process. Operability issues have been addressed poorly in planning, requirements, design, I&T, and system-contracting activities. In many cases, as documented in lessons-learned, this has resulted in significant avoidable increases in cost and risk. With complex missions and systems, operability is being recognized as an important end-to-end design issue. Never-the-less, lessons-learned and operability concepts remain, in many cases, poorly understood and sporadically applied. A key to effective application of operability concepts is adopting a 'mission system' paradigm. In this paradigm, flight and ground systems are treated, from an engineering and management perspective, as inter-related elements of a larger mission system. The mission system consists of flight hardware, flight software, telecom services, ground data system, testbeds, flight teams, science teams, flight operations processes, procedures, and facilities. The system is designed in functional layers, which span flight and ground. It is designed in response to project-level requirements, mission design and an operations concept, and is developed incrementally, with early and frequent integration of flight and ground components.

ground systems↗

Implementation and flight tests for the Digital Integrated Automatic Landing System (DIALS). Part 1: Flight software equations, flight test description and selected flight test data

Five flight tests of the Digital Automated Landing System (DIALS) were conducted on the Advanced Transport Operating Systems (ATOPS) Transportation Research Vehicle (TSRV) -- a modified Boeing 737 aircraft for advanced controls and displays research. These flight tests were conducted at NASA's Wallops Flight Center using the microwave landing system (MLS) installation on runway 22. This report describes the flight software equations of the DIALS which was designed using modern control theory direct-digital design methods and employed a constant gain Kalman filter. Selected flight test performance data is presented for localizer (runway centerline) capture and track at various intercept angles, for glideslope capture and track of 3, 4.5, and 5 degree glideslopes, for the decrab maneuver, and for the flare maneuver. Data is also presented to illustrate the system performance in the presence of cross, gust, and shear winds. The mean and standard deviation of the peak position errors for localizer capture were, respectively, 24 feet and 26 feet. For mild wind conditions, glideslope and localizer tracking position errors did not exceed, respectively, 5 and 20 feet. For gusty wind conditions (8 to 10 knots), these errors were, respectively, 10 and 30 feet. Ten hands off automatic lands were performed. The standard deviation of the touchdown position and velocity errors from the mean values were, respectively, 244 feet and 0.7 feet/sec.

Hueschen, R. M.↗

Workshop on Solar Electric Propulsion

A summary of the discussion at the workshop on solar electric propulsion (SEP) is presented. The purpose of ELITE SEP flight experiment is to demonstrate operation of solar array powered electric thrusters for raising spacecraft from parking orbit to higher altitudes, leading to definition of an operational SEP orbit transfer vehicles (OTV) for Air Force missions. Many of the problems or potential problems that may be associated with SEP are not well understood nor clearly identified, and system level phenomena such as interaction of thruster plume with the solar arrays cannot be simulated in a ground test. Therefore, an end-to-end system flight test is required to demonstrate solar electric propulsion.

Bents, David↗

The servicing aid tool: A teleoperated robotics system for space applications

The Servicing Aid Tool (SAT) is a teleoperated, force-reflecting manipulation system designed for use on the Space Shuttle. The system will assist Extravehicular Activity (EVA) servicing of spacecraft such as the Hubble Space Telescope. The SAT stands out from other robotics development programs in that special attention was given to provide a low-cost, space-qualified design which can easily and inexpensively be reconfigured and/or enhanced through the addition of existing NASA funded technology as that technology matures. SAT components are spaceflight adaptations of existing ground-based designs from Robotics Research Corporation (RRC), the leading supplier of robotics systems to the NASA and university research community in the United States. Fairchild Space is the prime contractor and provides the control electronics, safety system, system integration, and qualification testing. The manipulator consists of a 6-DOF Slave Arm mounted on a 1-DOF Positioning Link in the shuttle payload bay. The Slave Arm is controlled via a highly similar, 6-DOF, force-reflecting Master Arm from Schilling Development, Inc. This work is being performed under contract to the Goddard Space Flight Center Code, Code 442, Hubble Space Telescope Flight Systems and Servicing Project.

Dorman, Keith W.↗

Design and Technology Maturation of the Stratospheric Projectile Experiment of Entry Dynamics

A new technique for obtaining stratospheric free-flight dynamics data for atmospheric entry capsules is described. The Stratospheric Projectile Experiment of Entry Dynamics (SPEED) represents a new approach to characterizing the free-flight dynamics of vehicles in the supersonic and transonic regime of flight. The SPEED test architecture leverages a stratospheric balloon and 3D-printed flight system in a novel two-stage configuration to deliver test articles to supersonic conditions in the atmosphere which achieve dynamic similitude with a full-scale vehicle. Designed to address the limitations of existing test facilities, SPEED captures the complete time evolution of a vehicle’s dynamic state while producing a statistically significant number of observed flight trajectories to address the stochastic nature of the wake-driven dynamic stability phenomenon. SPEED was developed over two years at NASA Ames Research Center. This presentation describes the motivation for a new test architecture, operational constraints and achievable flight test envelopes, the design, and development of the SPEED concept.

Dynamic Stability↗

Robotic and Crewed Mars Missions Increasing the Demand for Planetary Protection Technology Needs

Planetary protection (PP) policy seeks to avoid harmful contamination by limiting biological and relevant organic contamination from spacecraft as well as preventing adverse changes to Earth’s biosphere when extraterrestial samples are brought back to Earth. The PP policy at NASA was updated in 2021 (NPR 8715.24) and 2022 (NASA-STD-8719.27) to enable missions by expanding the decades old prescriptive requirements to allow for an option of adopting performance-based requirements that are objectivesdriven, risk-informed and case-assured. In parallel, the final PP knowledge gap workshop was completed representing the international consensus on the key areas to be considered in developing crew PP policy. These knowledge gaps focused on key technology development areas in 1) microbial and human health monitoring, 2) technical and operations needed for contamination control and 3) natural transport of contamination on Mars. As robotic missions start to implement performance-based approaches and research and technology efforts commence to inform crew policy the demand for data quality driven verification and validation in relevant space environments. Examples of the types of testing that is envisioned includes test as you fly validation and verification of decontamination systems in a relevant on-orbit and Mars environment, developing lethality curves of terrestrial organisms to further our understanding of the biocidal impacts of Mars and the space environment, and particle transport model validation and verification. Thus, the PP discipline has identified the need for groundbased space environments to perform preliminary testing as validation and verification of flight systems and to advance the technology readiness level prior to further testing on-orbit or lunar environments to prepare for Mars.

J. Nick Benardini↗

Design of a Mars Airplane Propulsion System for the Aerial Regional-Scale Environmental Survey (ARES) Mission Concept

The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept with the goal of taking scientific measurements of the atmosphere, surface, and subsurface of Mars by using an airplane as the payload platform. ARES team first conducted a Phase-A study for a 2007 launch opportunity, which was completed in May 2003. Following this study, significant efforts were undertaken to reduce the risk of the atmospheric flight system, under the NASA Langley Planetary Airplane Risk Reduction Project. The concept was then proposed to the Mars Scout program in 2006 for a 2011 launch opportunity. This paper summarizes the design and development of the ARES airplane propulsion subsystem beginning with the inception of the ARES project in 2002 through the submittal of the Mars Scout proposal in July 2006.

Kuhl. Christopher A.↗

AERIAL MEASURING SYSTEM IN JAPAN

The U.S. Department of Energy National Nuclear Security Agency’s Aerial Measuring System deployed personnel and equipment to partner with the U.S. Air Force in Japan to conduct multiple aerial radiological surveys. These were the first and most comprehensive sources of actionable information for U.S. interests in Japan and provided early confirmation to the government of Japan as to the extent of the release from the Fukushima Daiichi Nuclear Power Generation Station. Many challenges were overcome quickly during the first 48 hours; including installation and operation of Aerial Measuring System equipment on multiple U.S. Air Force Japan aircraft, flying over difficult terrain, and flying with talented pilots who were unfamiliar with the Aerial Measuring System flight patterns. These all combined to make for a dynamic and non-textbook situation. In addition, the data challenges of the multiple and on-going releases, and integration with the Japanese government to provide valid aerial radiological survey products that both military and civilian customers could use to make informed decisions, was extremely complicated. The Aerial Measuring System Fukushima response provided insight in addressing these challenges and gave way to an opportunity for the expansion of the Aerial Measuring System’s mission beyond the borders of the US.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Cryogenic Propellant Storage and Transfer Technology Demonstration For Long Duration In-Space Missions

The high specific impulse of cryogenic propellants can provide a significant performance advantage for in-space transfer vehicles. The upper stages of the Saturn V and various commercial expendable launch vehicles have used liquid oxygen and liquid hydrogen propellants; however, the application of cryogenic propellants has been limited to relatively short duration missions due to the propensity of cryogens to absorb environmental heat resulting in fluid losses. Utilizing advanced cryogenic propellant technologies can enable the efficient use of high performance propellants for long duration missions. Crewed mission architectures for beyond low Earth orbit exploration can significantly benefit from this capability by developing realistic launch spacing for multiple launch missions, by prepositioning stages and by staging propellants at an in-space depot. The National Aeronautics and Space Administration through the Office of the Chief Technologist is formulating a Cryogenic Propellant Storage and Transfer Technology Demonstration Mission to mitigate the technical and programmatic risks of infusing these advanced technologies into the development of future cryogenic propellant stages or in-space propellant depots. NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. This mission will test and validate key cryogenic technological capabilities and has the objectives of demonstrating advanced thermal control technologies to minimize propellant loss during loiter, demonstrating robust operation in a microgravity environment, and demonstrating efficient propellant transfer on orbit. The status of the demonstration mission concept development, technology demonstration planning and technology maturation activities in preparation for flight system development are described.

Meyer, Michael L.↗

Robotic and Crewed Mars Missions Increasing the Demand for Planetary Protection Technology Needs

Planetary protection (PP) policy seeks to avoid harmful contamination by limiting biological and relevant organic contamination from spacecraft as well as preventing adverse changes to Earth’s biosphere when extraterrestrial samples are brought back to Earth. The PP policy at NASA was updated in 2021 (NPR 8715.24) and 2022 (NASA-STD-8719.27) to enable missions by expanding the decades old prescriptive requirements to allow for an option of adopting performance-based requirements that are objectives-driven, risk-informed and case-assured. In parallel, the final PP knowledge gap workshop was completed representing the international consensus on the key areas to be considered in developing crew PP policy. These knowledge gaps focused on key technology development areas in 1) microbial and human health monitoring, 2) technical and operations needed for contamination control and 3) natural transport of contamination on Mars. As robotic missions start to implement performance-based approaches and research and technology efforts commence to inform crew policy the demand for data quality driven verification and validation in relevant space environments. Examples of the types of testing that is envisioned includes test as you fly validation and verification of decontamination systems in a relevant on-orbit and Mars environment, developing lethality curves of terrestrial organisms to further our understanding of the biocidal impacts of Mars and the space environment, and particle transport model validation and verification. Thus, the PP discipline has identified the need for ground-based space environments to perform preliminary testing as validation and verification of flight systems and to advance the technology readiness level prior to further testing on-orbit or lunar environments to prepare for Mars.

J Nick Benardini↗

Titan/Centaur D-1T TC-3 Viking B Flight Data Report

Titan/Centaur TC-3 was launched from the Eastern Test Range, Complex 41, at 02:34 PM EDT on Tuesday, September 9, 1975. This was the third operational flight of the newest NASA unmanned launch vehicle. The spacecraft was the Viking B, the second of two orbiting and landing missions to Mars planned for the 1975 Martian launch opportunity. The objective of the launch phase of the mission, to inject the Viking spacecraft onto the planned transfer orbit to Mars, was successfully accomplished. A review of the launch vehicle system flight data is presented.

Source record↗