Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electronic Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

New Insights into the Crystal and Electronic Structures of Li 1+x V 1-x O 2 from Solid State NMR, Pair Distribution Function Analyses, and First Principles Calculations

Pair distribution function (PDF) analyses of synchrotron data obtained for the anode materials Li 1+x V 1-x O 2 (0 ≤ x ≤ 0.1) have been performed to characterize the short to medium range structural ordering. The data show clear evidence for the magnetically-induced distortion of the V sublattice to form trimers, the distortion persisting at even the highest excess Li content considered of x = 0.1. At least three distinct local environments were observed for the stoichiometric material LiVO 2 in 6 Li nuclear magnetic resonance (NMR) spectroscopy, the environments becoming progressively more disordered as the Li content increases. A two-dimensional Li-Li correlation NMR experiment (POST-C7) was used to identify the resonances corresponding to Li within the same layers. NMR spectra were acquired as a function of the state of charge, a distinct environment for Li in Li 2 VO 2 being observed. The results suggest that disorder within the Li layers (in addition to the presence of Li within the V layers as proposed by Armstrong et al. Nat. Mater.2011, 10, 223-229) may aid the insertion of Li into the Li 1+x V 1-x O 2 phase. The previously little-studied Li 2 VO 2 phase was also investigated by hybrid density functional theory (DFT) calculations, providing insights into magnetic interactions, spin-lattice coupling, and Li hyperfine parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Competitive fragmentation pathways of acetic acid dimer explored by synchrotron VUV photoionization mass spectrometry and electronic structure calculations

In present study, photoionization and dissociation of acetic acid dimers have been studied with the synchrotron vacuum ultraviolet photoionization mass spectrometry and theoretical calculations. Besides the intense signal corresponding to protonated cluster ions (CH{sub 3}COOH){sub n}{center_dot}H{sup +}, the feature related to the fragment ions (CH{sub 3}COOH)H{sup +}{center_dot}COO (105 amu) via {beta}-carbon-carbon bond cleavage is observed. By scanning photoionization efficiency spectra, appearance energies of the fragments (CH{sub 3}COOH){center_dot}H{sup +} and (CH{sub 3}COOH)H{sup +}{center_dot}COO are obtained. With the aid of theoretical calculations, seven fragmentation channels of acetic acid dimer cations were discussed, where five cation isomers of acetic acid dimer are involved. While four of them are found to generate the protonated species, only one of them can dissociate into a C-C bond cleavage product (CH{sub 3}COOH)H{sup +}{center_dot}COO. After surmounting the methyl hydrogen-transfer barrier 10.84 {+-} 0.05 eV, the opening of dissociative channel to produce ions (CH{sub 3}COOH){sup +} becomes the most competitive path. When photon energy increases to 12.4 eV, we also found dimer cations can be fragmented and generate new cations (CH{sub 3}COOH){center_dot}CH{sub 3}CO{sup +}. Kinetics, thermodynamics, and entropy factors for these competitive dissociation pathways are discussed. The present report provides a clear picture of the photoionization and dissociation processes of the acetic acid dimer in the range of the photon energy 9-15 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ordering of Trotterization: Impact on Errors in Quantum Simulation of Electronic Structure

Trotter–Suzuki decompositions are frequently used in the quantum simulation of quantum chemistry. They transform the evolution operator into a form implementable on a quantum device, while incurring an error—the Trotter error. The Trotter error can be made arbitrarily small by increasing the Trotter number. However, this increases the length of the quantum circuits required, which may be impractical. It is therefore desirable to find methods of reducing the Trotter error through alternate means. The Trotter error is dependent on the order in which individual term unitaries are applied. Due to the factorial growth in the number of possible orderings with respect to the number of terms, finding an optimal strategy for ordering Trotter sequences is difficult. In this paper, we propose three ordering strategies, and assess their impact on the Trotter error incurred. Initially, we exhaustively examine the possible orderings for molecular hydrogen in a STO-3G basis. We demonstrate how the optimal ordering scheme depends on the compatibility graph of the Hamiltonian, and show how it varies with increasing bond length. We then use 44 molecular Hamiltonians to evaluate two strategies based on coloring their incompatibility graphs, while considering the properties of the obtained colorings. We find that the Trotter error for most systems involving heavy atoms, using a reference magnitude ordering, is less than 1 kcal/mol. Relative to this, the difference between ordering schemes can be substantial, being approximately on the order of millihartrees. The coloring-based ordering schemes are reasonably promising—particularly for systems involving heavy atoms—however further work is required to increase dependence on the magnitude of terms. Finally, we consider ordering strategies based on the norm of the Trotter error operator, including an iterative method for generating the new error operator terms added upon insertion of a term into an ordered Hamiltonian.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2011

Electronic Structure of Doped Lanthanum Cuprates Studied with Resonant Inelastic X-Ray Scattering

We report a comprehensive Cu K-edge resonant inelastic x-ray scattering (RIXS) investigation of La{sub 2-x}Sr{sub x}CuO{sub 4} (LSCO) for 0 {le} x {le} 0.35, stripe-ordered La{sub 1.875}Ba{sub 0.125}CuO{sub 4} (LBCO), and La{sub 2}Cu{sub 0.96}Ni{sub 0.04}O{sub 4} (LCNO) crystals. The RIXS spectra measured at three high-symmetry momentum-transfer (q) positions are compared as a function of doping and for the different dopants. The spectra in the energy range 1-6 eV can be described with three broad peaks, which evolve systematically with increased doping. The most systematic trend was observed for q = ({pi},0) corresponding to the zone boundary. As hole doping increased, the spectral weight transfer from high energies to low energies is nearly linear with x at this q. We interpret the peaks as interband transitions in the context of existing band models for this system, assigning them to Zhang-Rice band {yields} upper Hubbard band, lower-lying band {yields} upper Hubbard band, and lower-lying band {yields} Zhang-Rice band transitions. The spectrum of stripe-ordered LBCO was also measured, and found to be identical to the correspondingly doped LSCO, except for a relative enhancement of the near-infrared peak intensity at {approx}1.5-1.7 eV. The temperature dependence of this near-infrared peak in LBCO was more pronounced than for other parts of the spectrum, continuously decreasing in intensity as the temperature was raised from 25 to 300 K. Finally, we find that 4% Ni substitution in the Cu site has a similar effect on the spectra as does Sr substitution in the La site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Phase equilibria, formation, crystal and electronic structure of ternary compounds in Ti-Ni-Sn and Ti-Ni-Sb ternary systems

The phase equilibria of the Ti-Ni-Sn and Ti-Ni-Sb ternary systems have been studied in the whole concentration range by means of X-ray and EPM analyses at 1073 K and 873 K, respectively. Four ternary intermetallic compounds TiNiSn (MgAgAs-type), TiNi{sub 2-x}Sn (MnCu{sub 2}Al-type), Ti{sub 2}Ni{sub 2}Sn (U{sub 2}Pt{sub 2}Sn-type), and Ti{sub 5}NiSn{sub 3} (Hf{sub 5}CuSn{sub 3}-type) are formed in Ti-Ni-Sn system at 1073 K. The TiNi{sub 2}Sn stannide is characterized by homogeneity in the range of 50-47 at% of Ni. The Ti-Ni-Sb ternary system at 873 K is characterized by formation of three ternary intermetallic compounds, Ti{sub 0.8}NiSb (MgAgAs-type), Ti{sub 5}Ni{sub 0.45}Sb{sub 2.55} (W{sub 5}Si{sub 3}-type), and Ti{sub 5}NiSb{sub 3} (Hf{sub 5}CuSn{sub 3}-type). The solubility of Ni in Ti{sub 0.8}NiSb decreases number of vacancies in Ti site up to Ti{sub 0.91}Ni{sub 1.1}Sb composition. - Graphical abstract: Isothermal section of the Ti-Ni-Sn phase diagram and DOS distribution in hypothetical TiNi{sub 1+x}Sn solid solution. Highlights: Black-Right-Pointing-Pointer Ti-Ni-Sn phase diagram was constructed at 1073 K. Black-Right-Pointing-Pointer Four ternary compounds are formed: TiNiSn, TiNi{sub 2-x}Sn, Ti{sub 2}Ni{sub 2}Sn, and Ti{sub 5}NiSn{sub 3}. Black-Right-Pointing-Pointer Three ternary compounds exist in Ti-Ni-Sb system at 873 K. Black-Right-Pointing-Pointer The TiNi{sub 2}Sb compound is absent.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Sparse maps—A systematic infrastructure for reduced-scaling electronic structure methods. II. Linear scaling domain based pair natural orbital coupled cluster theory

Domain based local pair natural orbital coupled cluster theory with single-, double-, and perturbative triple excitations (DLPNO-CCSD(T)) is a highly efficient local correlation method. It is known to be accurate and robust and can be used in a black box fashion in order to obtain coupled cluster quality total energies for large molecules with several hundred atoms. While previous implementations showed near linear scaling up to a few hundred atoms, several nonlinear scaling steps limited the applicability of the method for very large systems. In this work, these limitations are overcome and a linear scaling DLPNO-CCSD(T) method for closed shell systems is reported. The new implementation is based on the concept of sparse maps that was introduced in Part I of this series [P. Pinski, C. Riplinger, E. F. Valeev, and F. Neese, J. Chem. Phys. 143, 034108 (2015)]. Using the sparse map infrastructure, all essential computational steps (integral transformation and storage, initial guess, pair natural orbital construction, amplitude iterations, triples correction) are achieved in a linear scaling fashion. In addition, a number of additional algorithmic improvements are reported that lead to significant speedups of the method. The new, linear-scaling DLPNO-CCSD(T) implementation typically is 7 times faster than the previous implementation and consumes 4 times less disk space for large three-dimensional systems. For linear systems, the performance gains and memory savings are substantially larger. Calculations with more than 20 000 basis functions and 1000 atoms are reported in this work. In all cases, the time required for the coupled cluster step is comparable to or lower than for the preceding Hartree-Fock calculation, even if this is carried out with the efficient resolution-of-the-identity and chain-of-spheres approximations. The new implementation even reduces the error in absolute correlation energies by about a factor of two, compared to the already accurate previous implementation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

High resolution measurements supported by electronic structure calculations of two naphthalene derivatives: [1,5]- and [1,6]-naphthyridine—Estimation of the zero point inertial defect for planar polycyclic aromatic compounds

Polycyclic aromatic hydrocarbons (PAHs) molecules are suspected to be present in the interstellar medium and to participate to the broad and unresolved emissions features, the so-called unidentified infrared bands. In the laboratory, very few studies report the rotationally resolved structure of such important class of molecules. In the present work, both experimental and theoretical approaches provide the first accurate determination of the rotational energy levels of two diazanaphthalene: [1,5]- and [1,6]-naphthyridine. [1,6]-naphthyridine has been studied at high resolution, in the microwave (MW) region using a Fourier transform microwave spectrometer and in the far-infrared (FIR) region using synchrotron-based Fourier transform spectroscopy. The very accurate set of ground state (GS) constants deduced from the analysis of the MW spectrum allowed the analysis of the most intense modes in the FIR (ν{sub 38}-GS centered at about 483 cm{sup −1} and ν{sub 34}-GS centered at about 842 cm{sup −1}). In contrast with [1,6]-naphthyridine, pure rotation spectroscopy of [1,5]-naphthyridine cannot be performed for symmetry reasons so the combined study of the two intense FIR modes (ν{sub 22}-GS centered at about 166 cm{sup −1} and ν{sub 18}-GS centered at about 818 cm{sup −1}) provided the GS and the excited states constants. Although the analysis of the very dense rotational patterns for such large molecules remains very challenging, relatively accurate anharmonic density functional theory calculations appeared as a highly relevant supporting tool to the analysis for both molecules. In addition, the good agreement between the experimental and calculated infrared spectrum shows that the present theoretical approach should provide useful data for the astrophysical models. Moreover, inertial defects calculated in the GS (Δ{sub GS}) of both molecules exhibit slightly negative values as previously observed for planar species of this molecular family. We adjusted the semi-empirical relations to estimate the zero-point inertial defect (Δ{sub 0}) of polycyclic aromatic molecules and confirmed the contribution of low frequency out-of-plane vibrational modes to the GS inertial defects of PAHs, which is indeed a key parameter to validate the analysis of such large molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Erratum to: “The Fluorescence and Electronic Structure of Phenyl-Substituted Tetraazachlorin Molecules” [Optics and Spectroscopy 117, 722 (2014)]

should read “porphyrazine” instead of “porphyrazin”;should read “intersystem crossing” instead of “intercombinational conversion”;should read “mirror-symmetrical” instead of “reflection-symmetric”;should read “fluorescence enhancement” instead of “fluorescence buildup.”Page 722, Abstract, lines 9–10 from the top, the sentence should read:This characteristic increases upon tetrapyrrole phenylation.Page 727, left column, lines 17–18 from the top, the sentence should read:The vibronic transition parts of the emission spectrum are diffuse, (…)Page 727, left column, lines 29–30 from the top, the sentence should read:Note that the Stokes shift in these cases is relatively large.Page 729, left column, lines 8–10 from the bottom, the sentence should read:For H{sub 2}Ph{sub 8}TAC{sup mp} and H{sub 2}Ph{sub 6}TAC{sup tm}, the enhancement of fluorescence is weaker than in the former case: on cooling, τ{sub F} is increased by a factor of 4–5 in MTHF and by a factor of only 2.6–3 in toluene.Page 729, right column, lines 9–10 from the footnote, the sentence should read:It is seen from Table 1 that our results agree reasonably well with previously reported data.Page 730, left column, lines 16–19 from the top, the sentence should read:The lifetime for the outgassed H{sub 2}TAP solution intoluene (τ{sub T}{sup 0}) was measured by A.S. Stasheuski as phosphorescence decay at λ{sub reg} = 1070 nm using the setup described in [29].Page 730, left column, lines 20–23 from the top, the sentence should read:The τ{sub T} value derived from the kinetics of the rise of singlet oxygen luminescence [26] for the nonoutgassed solution at λ{sub reg} = 1272 nm is 162 ns;Page 730, right column, lines 25–27 from the top, the sentence should read:Therefore, for H{sub 2}TAP (λ{sub F}{sup 00}≈ 620 nm), the internal conversion probability should not be high.Page 731, left column, the heading of Table 2 should read:Bond lengths in the porphine macrocycle (Å).Page 731, left column, lines 3–6 from the top, the sentence should read:For elucidating the mechanism of the deactivation of the S{sub 1} state, it was of essential interest to see whether the enhancement of H{sub 2}TAP fluorescence would be observed at 77 K.Page 733, left column, lines 2–3 from the top, the sentence should read:The corresponding difference for the H{sub 2}P–H{sub 2}C pair is 0.013 Å.Page 733, left column, lines 14–16 from the top, the sentence should read:The macrocycle undergoes additional contraction, and the symmetry of its conjugated system is very close to D{sub 2h}.Page 733, right column, line 21 from the top should read:Replacement of the methine bridges (…)Page 734, left column, lines 8–11 from the figure caption, the sentence should read:This is the main reason of the large bathochromic shift of the Soret band of H{sub 2}Ph{sub 8}TAP and MgPh{sub 8}TAP [16] relative to H{sub 2}TAP and MgTAP, respectively.Page 734, left column, lines 1–4 from the bottom, the sentence should read:The complete INDO/Sm calculation yields the corresponding quantitative characteristics, which are in good agreement with experimental data (see below).Page 740, left column, reference no. 25 should read:25. V. A. Galievsky, A. S. Stasheuski, V. V. Kiselyov, A. I. Shabusov, M. V. Belkov, and B. M. Dzhagarov, Instrum. Exp. Tech. 53, 568 (2010).25. V. A. Galievsky, A. S. Stasheuski, V. V. Kiselyov, A. I. Shabusov, M. V. Belkov, and B. M. Dzhagarov, Instrum. Exp. Tech. 53, 568 (2010).30. V. L. Ermolaev and E. B. Sveshnikova, Acta Phys. Pol. 34, 771 (1968).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Synthesis, structure, electronic and thermal properties of sphalerite CuZn 2 InS 4

Quaternary chalcogenides continue to be of interest due to the variety of physical properties they possess, as well as their potential for different applications of interest. Investigations on materials with the sphalerite crystal structure have only recently begun. In this study we have synthesized sulfur-based sphalerite quaternary chalcogenides, including off-stoichiometric compositions, and investigated the temperature-dependent electronic, thermal and structural properties of these materials. Insulating to semiconducting transport is observed with stoichiometric variation, and analyses of heat capacity and thermal expansion revealed lattice anharmonicity that contributes to the low thermal conductivity these materials possess. Finally, we include similar analyses for CuZn 2 InSe 4 and compare these sphalerite quaternary chalcogenides to that of zinc blende binaries in order to fully understand the origin of the low thermal conductivity these quaternary chalcogenides possess.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bidentate Lewis Base Ligand-Mediated Surface Stabilization and Modulation of the Electronic Structure of CsPbBr 3 Perovskite Nanocrystals

The desorption of conventional ligands from the surface of halide perovskite nanocrystals (NCs) often causes their structural instability and the deterioration of the optoelectronic properties. To address this challenge, we present an approach of using a bidentate Lewis base ligand, namely, 1,4-bis(diphenylphosphino)butane (DBPP), for the synthesis of CsPbBr 3 NCs. The phosphine group of DBPP has a strong interaction with PbBr 2 precursor, forming a highly crystalline intermediate complex during the reaction. In the presence of oleic acid, the uncoordinated phosphine group of DBPP is converted into the phosphonium cation, which strongly binds with the surface bromide of the formed CsPbBr 3 NCs through hydrogen bonding. Density functional theory calculations suggest that DBPP can strongly bind to the undercoordinated lead and surface bromide ions of CsPbBr 3 NCs through its unprotonated and protonated phosphine groups, respectively. The robust binding of DBPP with the surface of perovskite NCs helps to preserve their structural integrity under various environmental stresses. Moreover, the electron density and energy levels are regulated in DBPP-capped CsPbBr 3 NCs via the efficient transfer of electrons from the ligands to the NCs, resulting in their improved photocatalytic CO 2 reduction performance. Furthermore, our study highlights the potential of using bidentate ligands to stabilize the surface of perovskite NCs and modulate their optical and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electronic, structural and magnetic properties of Mn (1+x) Pt (1-x) Sb

Electronic and magnetic properties of half-metallic Heusler alloys can be modified by tuning their chemical compositions. We have carried out a combined theoretical and experimental investigation of Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) alloys. Our first-principles calculations indicate that the stoichiometric MnPtSb exhibits nearly half-metallic band structure, but a robust half-metallicity can be achieved in Mn-rich compositions Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) with x = 0.25 and higher in their cubic structures. In addition, while MnPtSb exhibits ferromagnetic alignment, Mn (1+x) Pt (1-x) Sb are ferrimagnetic for all non-zero values of x. We have also synthesized cubic MnPtSb and Mn 1.25 Pt 0.75 Sb alloys using arc melting and annealing. The magnetic properties of these alloys are consistent with our theoretical predictions. Furthermore, these results indicate that the Mn-rich Mn (1+x) Pt (1-x) Sb alloys have potential for spin-transport-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Electronic structure of graphene oxide and reduced graphene oxide monolayers

Graphene oxide (GO) monolayers obtained by Langmuir Blodgett route and suitably treated to obtain reduced graphene oxide (RGO) monolayers were studied by photoelectron spectroscopy. Upon reduction of GO to form RGO C1s x-ray photoelectron spectra showed increase in graphitic carbon content, while ultraviolet photoelectron spectra showed increase in intensity corresponding to C2p-{pi} electrons ({approx}3.5 eV). X-ray excited Auger transitions C(KVV) and plasmon energy loss of C1s photoelectrons have been analyzed to elucidate the valence band structure. The effective number of ({pi}+{sigma}) electrons as obtained from energy loss spectra was found to increase by {approx}28% on reduction of GO.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2013

Favorable electronic structure for organic solar cells induced by strong interaction at interface

To clarify the role of buffer layer in organic solar cells (OSCs), the electronic properties of bathocuproine (BCP)/Mg interface were systematically investigated by using ultraviolet photoemissions spectroscopy, high-resolution X-ray photoemission spectroscopy, angle-resolved X-ray photoemission spectroscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The results show there are gap states at the interface, which are caused by the interaction between BCP and Mg. The formation of Mg-N bond was found at the interface. The NEXAFS measurements show that BCP molecules for 1-2 monolayers are lying-down on the substrate, whereas orient randomly for thick BCP layer. It was supposed that the gap states and the highly-ordered orientation of thin BCP layer are the reasons for improving the performance of OSC with BCP buffer layer and low work function metal cathode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Nature of native atomic defects in ZrTe 5 and their impact on the low-energy electronic structure

Over the past decades, investigations of the anomalous low-energy electronic properties of ZrTe 5 have reached a wide array of conclusions. An open question is the growth method's impact on the stoichiometry of ZrTe 5 samples, especially given the very small density of states near its chemical potential. In this work, we report on high-resolution scanning tunneling microscopy and spectroscopy measurements performed on samples grown via different methods. Using density functional theory calculations, we identify the most prevalent types of atomic defects on the surface of ZrTe 5 , namely, Te vacancies and intercalated Zr atoms. Finally, we precisely quantify their density and outline their role as ionized defects in the anomalous resistivity of this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Socorro Electronic Structure Software

Socorro can be used to compute the ground-state electron density for a periodically repeated simulation cell in which the external potential is obtained from norm-conserving pseudopotentials or projector-augmented-wave functions. The ground-state electron density is computed by summation over one-electron orbitals which are obtained using the Kohn-Sham formulation of density-functional theory and which are expanded in a plane-wave basis. Various quantities can be computed from the ground-state solution, including atomic forces which can be used to optimize atom positions in the simulation cell and to perform molecular dynamics simulations.

Foiles, StephenM↗
DOE OSTI2017

Socorro Electronic Structure Software

Socorro can be used to compute the ground-state electron density for a periodically repeated simulation cell in which the external potential is obtained from norm-conserving pseudopotentials or projector-augmented-wave functions. The ground-state electron density is computed by summation over one-electron orbitals which are obtained using the Kohn-Sham formulation of density-functional theory and which are expanded in a plane-wave basis. Various quantities can be computed from the ground-state solution, including atomic forces which can be used to optimize atom positions in the simulation cell and to perform molecular dynamics simulations.

Foiles, Stephen M↗
DOE OSTI2018

Electronic and structural response to pressure in the hyperkagome-lattice Na 3 Ir 3 O 8

Here, the hyper-kagome lattice iridate Na 3 Ir 3 O 8 , closely related to spin liquid candidate Na 4 Ir 3 O 8 , is unusual in that spin-orbit interactions acting on the 1/3-filled J eff = 1/2 state lead to a semimetallic ground state, in contrast to the conventional insulating Mott state stabilized by S-O interactions in the 1/2-filled J eff = 1/2 state of other iridates including Na 4 Ir 3 O 8 . We have studied the evolution of crystal structure, electronic structure, and transport in Na 3 Ir 3 O 8 under high pressure using x-ray diffraction, x-ray absorption near edge structure, and electrical resistance measurements in a diamond anvil cell. The study was augmented by the use of ab initio calculations, which provided insight into pressure-induced changes in crystal and electronic structure. We found that Na 3 Ir 3 O 8 transforms from a semimetal to an insulator under pressure, with an estimated energy gap that increases to about 130 meV at P similar to 9 GPa. At approximately 10 GPa, a cubic-to-monoclinic structural transition takes place between two insulating phases. This structural transition features a sizable volume collapse and a high-pressure phase characterized by apparent dimerization of Ir-Ir distances, wide dispersion of Ir-O-Ir bond angles, and an increase in the occupation of 5 d states. Although the energy gap is reduced in the high-pressure phase, insulating behavior remains to the highest pressures similar to 1 Mbar. The strongly pressure-dependent insulating gap shows a positive correlation with the expectation value of the angular part of the S-O interaction, < L • S >, which may indicate an active role of S-O interactions in stabilizing the insulating state that emerges in the compressed Na 3 Ir 3 O 8 structure.

36 MATERIALS SCIENCE↗