Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Automated chromosome analysis

Minicomputer-controlled system automatically prepares and analyses blood samples and displays karyotype in pictorial form as primary output. System accuracy is assured by operator interaction at key points during process. System can process up to 576 specimens per day.

Castleman, K. R.↗

JAN transistor and diode characterization test program: JANTX diode 1N759A

The necessary data to create a new class of specifications was the objective of this characterization program. Sample selection was made according to the following criteria: (1) manufacturer or qualified distributor; (2) two vendors; and (3) two date codes. The general guidelines for procurement were two QPL vendors, JAN or JANTX, and two manufacturing lots, 27 from each lot. All data were acquired with three digit accuracy. The data processing and calculation of statistical parameters were performed by the Tektronix computer system using 4 digit display.

Takeda, H.↗

Toward a new V/STOL generation

While many V/STOL problems are now better understood and technology has progressed to the point where higher thrust/weight ratios and greater stability augmentation are achievable, a number of still existing insufficiencies provide a sobering reminder that learning in ground testing and simulation, and careful methodical planning, are a prerequisite for any research and development program. The present paper is centered on the major technical problems for the Navy Type multimission V/STOL aircraft. The aircraft's configurations with and without forward lift fan are discussed, along with the propulsion systems, testing techniques, controls, displays, flight dynamics, and ground/flow field interactions.

Roberts, L.↗

Analysis of a VTOL hover task with predictor displays using an optimal control model of the human operator

The influence of different types of predictor displays in a longitudinal VTOL hover task is analyzed in a theoretical study. It was assumed that pitch angle and position are presented to the pilot in separate displays namely the artificial horizon and position display. The predictive information is calculated by means of a Taylor series. From earlier experimental studies it is well known that predictor displays improve human and system performance and result in reducing human workload. In this study, an optimal control model is used to prove this effect theoretically. Several cases with differing amounts of predictive and rate information are compared.

Johannsen, G.↗

Design study of a low cost civil aviation GPS receiver system

A low cost Navstar receiver system for civil aviation applications was defined. User objectives and constraints were established. Alternative navigation processing design trades were evaluated. Receiver hardware was synthesized by comparing technology projections with various candidate system designs. A control display unit design was recommended as the result of field test experience with Phase I GPS sets and a review of special human factors for general aviation users. Areas requiring technology development to ensure a low cost Navstar Set in the 1985 timeframe were identified.

Cnossen, R.↗

Advanced flight control system study

A fly by wire flight control system architecture designed for high reliability includes spare sensor and computer elements to permit safe dispatch with failed elements, thereby reducing unscheduled maintenance. A methodology capable of demonstrating that the architecture does achieve the predicted performance characteristics consists of a hierarchy of activities ranging from analytical calculations of system reliability and formal methods of software verification to iron bird testing followed by flight evaluation. Interfacing this architecture to the Lockheed S-3A aircraft for flight test is discussed. This testbed vehicle can be expanded to support flight experiments in advanced aerodynamics, electromechanical actuators, secondary power systems, flight management, new displays, and air traffic control concepts.

Hartmann, G. L.↗

Digital image processing on a small computer system

A minicomputer-based image processing facility provides a relatively low-cost entry point for education about image analysis applications in remote sensing. While a minicomputer has sufficient processing power to produce results quite rapidly for low volumes of small images, it does not have sufficient power to perform CPU- or 1/0-bound tasks on large images. A system equipped with a display terminal is ideally suited for interactive tasks. Software procurement is a limiting factor for most end users, and software availability may well be the overriding consideration in selecting a particular hardware configuration. The hardware chosen should be selected to be compatible with the software and with concern for future expansion.

Danielson, R.↗

A study of image quality for radar image processing

Methods developed for image quality metrics are reviewed with focus on basic interpretation or recognition elements including: tone or color; shape; pattern; size; shadow; texture; site; association or context; and resolution. Seven metrics are believed to show promise as a way of characterizing the quality of an image: (1) the dynamic range of intensities in the displayed image; (2) the system signal-to-noise ratio; (3) the system spatial bandwidth or bandpass; (4) the system resolution or acutance; (5) the normalized-mean-square-error as a measure of geometric fidelity; (6) the perceptual mean square error; and (7) the radar threshold quality factor. Selective levels of degradation are being applied to simulated synthetic radar images to test the validity of these metrics.

King, R. W.↗

Observations of the dynamics of the polar thermosphere

The dynamics of the polar thermosphere are examined by using observations made from the Dynamics Explorer 2 satellite. The results used in this study were obtained primarily from the Fabry-Perot interferometer (FPI) and the wind and temperature spectrometer (WATS) during the time period from September 1981 through January 1982. Two primary geophysical conditions were examined: these were the southern summer and the northern winter polar regions. The results support the conclusion that above 60 degrees of latitude the neutral winds are strongly controlled by ion/neutral frictional momentum transfer resulting from magnetospheric convection. This implies that the natural coordinate system within which to display the neutral winds in the high polar thermosphere is magnetic. The collected observations of this study were used to assess the validity of two of the large thermospheric general circulation models. The result of this assessment was that the models reasonably represent the vector winds at high altitudes but do not, at present, accurately simulate the thermodynamics of that regime.

Hays, P. B.↗

Synthesized speech rate and pitch effects on intelligibility of warning messages for pilots

In civilian and military operations, a future threat-warning system with a voice display could warn pilots of other traffic, obstacles in the flight path, and/or terrain during low-altitude helicopter flights. The present study was conducted to learn whether speech rate and voice pitch of phoneme-synthesized speech affects pilot accuracy and response time to typical threat-warning messages. Helicopter pilots engaged in an attention-demanding flying task and listened for voice threat warnings presented in a background of simulated helicopter cockpit noise. Performance was measured by flying-task performance, threat-warning intelligibility, and response time. Pilot ratings were elicited for the different voice pitches and speech rates. Significant effects were obtained only for response time and for pilot ratings, both as a function of speech rate. For the few cases when pilots forgot to respond to a voice message, they remembered 90 percent of the messages accurately when queried for their response 8 to 10 sec later.

Simpson, C. A.↗

Orbital flight test of the manned maneuvering unit

Based on the experience provided by the first astronaut maneuvering unit used in the early extravehicular activities missions, a manned maneuvering unit (MMU) was developed that culminated in emergence of the M509 unit. The M509 unit, flown on the STS41-B, is a self-contained propulsive backpack. A flight support station (FSS) provides cargo bay stowage for the MMU, serves as a donning/doffing station, and provides an interface with the Orbiter gaseous nitrogen system for propellant refueling, electrical power for heaters, and temperature instrumentation. The MMU propulsion system, its control system, the electrical system and the flight displays are described. The orbital flight test has demonstrated superior handling and flying qualities of the MMU.

Stewart, R. L.↗

A simulation evaluation of a pilot interface with an automatic terminal approach system

The pilot-machine interface with cockpit automation is a critical factor in achieving the benefits of automation and reducing pilot blunders. To improve this interface, an automatic terminal approach system (ATAS) was conceived that can automatically fly a published instrument approach by using stored instrument approach data to automatically tune airplane radios and control an airplane autopilot and autothrottle. The emphasis in the ATAS concept is a reduction in pilot blunders and work load by improving the pilot-automation interface. A research prototype of an ATAS was developed and installed in the Langley General Aviation Simulator. A piloted simulation study of the ATAS concept showed fewer pilot blunders, but no significant change in work load, when compared with a baseline heading-select autopilot mode. With the baseline autopilot, pilot blunders tended to involve loss of navigational situational awareness or instrument misinterpretation. With the ATAS, pilot blunders tended to involve a lack of awareness of the current ATAS mode state or deficiencies in the pilots' mental model of how the system operated. The ATAS display provided adequate approach status data to maintain situational awareness.

Hinton, David A.↗

Configuration management issues and objectives for a real-time research flight test support facility

Presented are some of the critical issues and objectives pertaining to configuration management for the NASA Western Aeronautical Test Range (WATR) of Ames Research Center. The primary mission of the WATR is to provide a capability for the conduct of aeronautical research flight test through real-time processing and display, tracking, and communications systems. In providing this capability, the WATR must maintain and enforce a configuration management plan which is independent of, but complimentary to, various research flight test project configuration management systems. A primary WATR objective is the continued development of generic research flight test project support capability, wherein the reliability of WATR support provided to all project users is a constant priority. Therefore, the processing of configuration change requests for specific research flight test project requirements must be evaluated within a perspective that maintains this primary objective.

Yergensen, Stephen↗

Configuration management issues and objectives for a real-time research flight test support facility

An account is given of configuration management activities for the Western Aeronautical Test Range (WATR) at NASA-Ames, whose primary function is the conduct of aeronautical research flight testing through real-time processing and display, tracking, and communications systems. The processing of WATR configuration change requests for specific research flight test projects must be conducted in such a way as to refrain from compromising the reliability of WATR support to all project users. Configuration management's scope ranges from mission planning to operations monitoring and performance trend analysis.

Yergensen, Stephen↗

Computer vision techniques for rotorcraft low-altitude flight

A description is given of research that applies techniques from computer vision to automation of rotorcraft navigation. The effort emphasizes the development of a methodology for detecting the ranges to obstacles in the region of interest based on the maximum utilization of passive sensors. The range map derived from the obstacle detection approach can be used as obstacle data for the obstacle avoidance in an automataic guidance system and as advisory display to the pilot. The lack of suitable flight imagery data, however, presents a problem in the verification of concepts for obstacle detection. This problem is being addressed by the development of an adequate flight database and by preprocessing of currently available flight imagery. Some comments are made on future work and how research in this area relates to the guidance of other autonomous vehicles.

Sridhar, Banavar↗

Dynamics of coorbital satellite rings

The dynamical behavior of a coorbital satellite ring is studied for N = 2-9 satellites, in terms of a simplified dynamical description, in which the motion is reduced to the separation angles between satellites. The number and stability of different kinds of stationary configurations is explored, revealing that equally spaced rings are not stable against small perturbations for N not greater than 6, while for N = 2-8 there exists another, stable compact solution. Integrations of exact equations confirm these results. Moreover, the systems are found to display chaotic characteristics for a certain range of energy. The behavior can be interpreted in terms of maximum velocity curves, defining the allowed region of the motion in the phase space.

Salo, H.↗

Computer-aided boundary delineation of agricultural lands

The National Agricultural Statistics Service of the United States Department of Agriculture (USDA) presently uses labor-intensive aerial photographic interpretation techniques to divide large geographical areas into manageable-sized units for estimating domestic crop and livestock production. Prototype software, the computer-aided stratification (CAS) system, was developed to automate the procedure, and currently runs on a Sun-based image processing system. With a background display of LANDSAT Thematic Mapper and United States Geological Survey Digital Line Graph data, the operator uses a cursor to delineate agricultural areas, called sampling units, which are assigned to strata of land-use and land-cover types. The resultant stratified sampling units are used as input into subsequent USDA sampling procedures. As a test, three counties in Missouri were chosen for application of the CAS procedures. Subsequent analysis indicates that CAS was five times faster in creating sampling units than the manual techniques were.

Cheng, Thomas D.↗

Design and calibration of a vacuum compatible scanning tunneling microscope

A vacuum compatible scanning tunneling microscope was designed and built, capable of imaging solid surfaces with atomic resolution. The single piezoelectric tube design is compact, and makes use of sample mounting stubs standard to a commercially available surface analysis system. Image collection and display is computer controlled, allowing storage of images for further analysis. Calibration results from atomic scale images are presented.

Abel, Phillip B.↗