Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data virtualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Positrons and Electrons at HERA and HERMES

The HERA electron-proton storage ring at DESY, Hamburg, provided a unique laboratory for the collection of data in deep-inelastic charged lepton-proton scattering at a center-of-mass energy of about 7 GeV for the fixed-target experiment HERMES and at 318 GeV for the collider experiments ZEUS and Hl. HERA could be operated with both electrons and positrons. The ability of the lepton beam to polarize itself was exploited.Data taken with the HERMES spectrometer on unpolarized and transversely polarized gaseous targets are presented. Two examples involving interference processes are chosen that are sensitive to the beam charge: the measurement of azimuthal asymmtries in deeply-virtual COMPTON scattering and the search for a two-photon exchange signal at HERMES.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crossed-beam experiment for the scattering of low- and intermediate-energy electrons from BF{sub 3}: A comparative study with XF{sub 3} (X = C, N, and CH) molecules

Absolute differential cross sections (DCSs) for electron interaction with BF{sub 3} molecules have been measured in the impact energy range of 1.5–200 eV and recorded over a scattering angle range of 15°–150°. These angular distributions have been normalized by reference to the elastic DCSs of the He atom and integrated by employing a modified phase shift analysis procedure to generate integral cross sections (ICSs) and momentum transfer cross sections (MTCSs). The calculations of DCSs and ICSs have been carried out using an independent atom model under the screening corrected additivity rule (IAM-SCAR). The present elastic DCSs have been found to agree well with the results of IAM-SCAR calculation above 20 eV, and also with a recent Schwinger multichannel calculation below 30 eV. Furthermore, in the comparison with the XF{sub 3} (X = B, C, N, and CH) molecules, the elastic DCSs reveal a similar angular distribution which are approximately equal in magnitude from 30 to 200 eV. This feature suggests that the elastic scattering is dominated virtually by the 3-outer fluorine atoms surrounding the XF{sub 3} molecules. The vibrational DCSs have also been obtained in the energy range of 1.5–15 eV and vibrational analysis based on the angular correlation theory has been carried out to explain the nature of the shape resonances. Limited experiments on vibrational inelastic scattering confirmed the existence of a shape resonance with a peak at 3.8 eV, which is also observed in the vibrational ICS. Finally, the estimated elastic ICSs, MTCSs, as well as total cross sections are compared with the previous cross section data available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning surrogate for charged particle beam dynamics with space charge based on a recurrent neural network with aleatoric uncertainty

In this work, we develop a machine learning (ML) model with aleatoric uncertainty for the low energy beam transport (LEBT) region of the LANSCE linear accelerator in which we model the transport of a space-charge-dominated 750 keV proton beam through a lattice of 22 quadrupole magnets. Our ML model is developed based on data generated by a Kapchinsky–Vladimirsky (KV) envelope model of beam transport. We show that a recurrent neural network can be used as a dynamical surrogate model for fast prediction of the LEBT beam envelope. Furthermore, we endow the model with the prediction of aleatoric uncertainty and compare three different approaches. We demonstrate that the ML-based uncertainty quantification models are well calibrated and produce good estimates of the regions where the model is less certain about its predictions. This ML framework is a necessary step in the development of a real-time virtual diagnostic tool with uncertainty quantification that can be integrated into more complex downstream tasks (e.g., adaptive control or learning flexible control policies via reinforcement learning) for improved efficiency in beam operations. In future work, we plan to expand on this preliminary study by considering more realistic envelope models that include longitudinal momentum spread and dispersive effects in bending magnets, as well as particle tracking codes with 3D space charge (such as and ). Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

Measurement of dielectron production in central Pb-Pb collisions at s NN = 2.76 TeV

The first measurement of dielectron (e + e - ) production in central (0–10%) Pb–Pb collisions at $\sqrt{s}$$_{NN}$ = 2.76 TeV at the LHC is presented. The dielectron invariant-mass spectrum is compared to the expected contributions from hadron decays in the invariant-mass range 0 < m ee < 3.5 GeV /$c$ 2 . The ratio of data and the cocktail of hadronic contributions without vacuum ρ0 is measured in the invariant-mass range 0.15 < m ee < 0.7 GeV /$c$ 2 , where an excess of dielectrons is observed in other experiments, and its value is 1.40 ± 0.28 (stat.) ± 0.08 (syst.) ± 0.27 (cocktail). The dielectron spectrum measured in the invariant mass range 0 < m ee < 1 GeV /$c$ 2 is consistent with the predictions from two theoretical model calculations that include thermal dielectron production from both partonic and hadronic phases with in-medium broadened ρ 0 meson. The fraction of direct virtual photons over inclusive virtual photons is extracted for dielectron pairs with invariant mass 0.1 < m ee < 0.3 GeV /$c$ 2 and in the transverse-momentum intervals 1 < $p{_T}_{,ee}$ < 2 GeV/$c$ and 2 < $p{_T}_{,ee}$ < 4 GeV /$c$. The measured fraction of virtual direct photons is consistent with the measurement of real direct photons by ALICE and with the expectations from previous dielectron measurements at RHIC within the experimental uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rethinking Sensitivity Analysis of Nuclear Simulations with Topology

In nuclear engineering, understanding the safety margins of the nuclear reactor via simulations is arguably of paramount importance in predicting and preventing nuclear accidents. It is therefore crucial to perform sensitivity analysis to understand how changes in the model inputs affect the outputs. Modern nuclear simulation tools rely on numerical representations of the sensitivity information -- inherently lacking in visual encodings -- offering limited effectiveness in communicating and exploring the generated data. In this paper, we design a framework for sensitivity analysis and visualization of multidimensional nuclear simulation data using partition-based, topology-inspired regression models and report on its efficacy. We rely on the established Morse-Smale regression technique, which allows us to partition the domain into monotonic regions where easily interpretable linear models can be used to assess the influence of inputs on the output variability. The underlying computation is augmented with an intuitive and interactive visual design to effectively communicate sensitivity information to the nuclear scientists. Our framework is being deployed into the multi-purpose probabilistic risk assessment and uncertainty quantification framework RAVEN (Reactor Analysis and Virtual Control Environment). We evaluate our framework using an simulation dataset studying nuclear fuel performance.

computational topology↗

Observation and differential cross section measurement of neutral current DIS events with an empty hemisphere in the Breit frame

The Breit frame provides a natural frame to analyze lepton–proton scattering events. In this reference frame, the parton model hard interactions between a quark and an exchanged boson defines the coordinate system such that the struck quark is back-scattered along the virtual photon momentum direction. In Quantum Chromodynamics (QCD), higher order perturbative or non-perturbative effects can change this picture drastically. As Bjorken-x decreases below one half, a rather peculiar event signature is predicted with increasing probability, where no radiation is present in one of the two Breit-frame hemispheres and all emissions are to be found in the other hemisphere. At higher orders in $\alpha$ s or in the presence of soft QCD effects, predictions of the rate of these events are far from trivial, and that motivates measurements with real data. We report on the first observation of the empty current hemisphere events in electron–proton collisions at the HERA collider using data recorded with the H1 detector at a center-of-mass energy of 319 GeV. The fraction of inclusive neutral-current DIS events with an empty hemisphere is found to be 0.0112 ± 3.9% stat ± 4.5% syst ± 1.6% mod in the selected kinematic region of 150 < Q 2 < 1500 GeV 2 and inelasticity 0.14 < y < 0.7. The data sample corresponds to an integrated luminosity of 351.1 pb -1 , sufficient to enable differential cross section measurements of these events. The results show an enhanced discriminating power at lower Bjorken-x among different Monte Carlo event generator predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ROMUSE 2.0 User Manual

ROMUSE (Reduced Order Modeling Based Uncertainty/Sensitivity Estimator) is an effort within the Consortium for Advanced Simulation of Light water reactors (CASL) to provide an analysis tool to be used in conjunction with reactor core simulators, especially the Virtual Environment for Reactor Applications (VERA). ROMUSE is written in C++ and is currently capable of performing various types of parameters perturbations, uncertainty quantification, surrogate models construction and subspace analysis. Version 2.0 has the capability to interface with DAKOTA which gives ROMUSE access to the various algorithms implemented within DAKOTA. ROMUSE is mainly designed to interface with VERA and the Comprehensive Modeling and Simulation Suite for Nuclear Safety Analysis and Design (SCALE) [1,2,3], however, ROMUSE can interface with any general model (e.g. python and matlab) with Input/Output (I/O) format that follows the Hierarchical Data Format 5 (HDF5). In this brief user manual, the use of ROMUSE will be overviewed and example problems will be presented and briefly discussed. The algorithms provided here range from algorithms inspired by those discussed in Ref.[4] to nuclear-specific algorithms discussed in Ref. [3].

97 MATHEMATICS AND COMPUTING↗

Bioimaging Capabilities to Enable Mapping of the Neural Connections in a Complex Brain

DOE’s Office of Science (SC), through its BRAIN Initiative Working Group, convened a virtual roundtable on November 2-4, 2020, to develop a conceptual framework for the capabilities needed to enable an interdisciplinary community of researchers to fully map the neural connections initially in the brain of a mouse and ultimately in the brain of a human. Over 30 researchers and programmatic observers from diverse scientific backgrounds, including those working in both the basic and applied sciences, participated in the roundtable and conceptualized forward-leaning ideas. In developing the framework, participants were asked to address questions under the three themes: connectome requirements, bioimaging technology, and computing and data.

59 BASIC BIOLOGICAL SCIENCES↗

Booster and AGS transverse emittance during the 2006 and 2009 polarized proton runs

This note is an overview of issues relating to transverse polarized proton emittance in the Booster and AGS. It also compares the transverse emittance during the FY09 polarized proton run with it during the FY06 run as several changes were made for the FY09 run in an attempt to reduce the transverse emittance coming out of the AGS. The FY06 run is used for comparison because it was relatively long, and it's believed that the performance of the injectors for polarized protons, up until FY09, was best during that run. Over the shutdown just before the FY09 run work was done in LEBT and MEBT to reduce the emittance coming out of the Linac. Measurements of the beam coming out of Linac1 indicate that the horizontal normalized emittance was reduced from 11.0 {pi} to 4.5 {pi}mm mrad, and that the vertical normalized emittance was reduced from 12.1 {pi} to 5.5 {pi} mm mrad going from FY06 to FY09. There were 2 new types of stripping foil installed in the Booster, called descriptively the 'strip' (No.6) and 'stamp' (No.2) foil, both nominally 100 {micro}g/cm{sup 2}. Both foils are composed of a diamond like material, and designed to reduce the number of times the beam goes through the foil. Other than those, there are two standard 100 {micro}g/cm carbon foils (No.3 and 5), and one 200 {micro}g/cm{sup 2} carbon foil (No.4). Of the two 100 {micro}g/cm{sup 2} foils, one has shown some deterioration (No.3) in stripping efficiency. During the FY06 run a standard 100 {micro}g/cm{sup 2} foil was generally used, and during the FY09 run the strip foil was generally used, though the stamp foil was also used for the last 3-4 weeks of the run. Both the FY06 and FY09 runs were about 5 months long, starting in late January, FY06 ending in late June, and FY09 ending in early July. A new injection setup was used for about the last 3 months of FY09, from the beginning of April to the end of the run. This setup uses 1/2 integer stopband correctors with the tunes near, but slightly greater than, 4.5 to distort the {beta} functions at the foil in order to reduce the emittance blowup caused by scattering on the foil. New BtA quad settings, largely based on a MAD model of the BtA line and AGS were used for virtually the entire FY09 run (Feb 5 to the end) in an attempt to improve the matching into the AGS. Since, it has been thought for some time that there is emittance blowup in the vertical due to an injection mismatch. The nominal Linac pulse width was decreased from 400 {micro}s to 300 {micro}s in the latter part of february 09, so the vast majority of the FY09 run used a 300 {micro}s pulse width. The standard pulse width for FY06 was 400 {micro}s. This has some implications for comparing the data from FY06 with that from FY09, but they don't seem insurmountable.

43 PARTICLE ACCELERATORS↗

Could what that ESCO sales rep said really be true? Savings realization rates in ESPC versus bid-to-spec projects

Claims that savings realization is greater in energy savings performance contracts (ESPCs) are rampant at least among energy service company representatives and other ESPC cheerleaders. But hard supporting evidence for these claims has been virtually non-existent. The Department of Energy's Federal Energy Management Program uses its Compliance Tracking System (CTS) database to document the performance of federal buildings and projects towards meeting various federal energy-saving goals. This paper focuses on preliminary analysis from CTS to understand and compare the performance of federal ESPCs with projects that have been implemented with more conventional government appropriations funding. The authors have found preliminary evidence using CTS that shows markedly higher savings realization rates among ESPC projects than appropriations-funded ones. There are numerous caveats to the data comparison that clamor for further study, but the difference is still intriguing. If borne out, this finding will provide concrete support to the idea that ESPCs guarantees and measurement and verification, long touted by energy service companies (ESCOs) as offering savings assurance, may truly yield substantial benefits. If ESPCs actually do perform better (i.e., have higher realization rates and savings persistence) than conventional bid-to-spec projects, the perceived premium for conducting them may look like a very good deal after all.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Catalysts at work: From integral to spatially resolved X-ray absorption spectroscopy

Spectroscopic studies on heterogeneous catalysts have mostly been done in an integral mode. However, in many cases spatial variations in catalyst structure can occur, e.g. during impregnation of pre-shaped particles, during reaction in a catalytic reactor, or in microstructured reactors as the present overview shows. Therefore, spatially resolved molecular information on a microscale is required for a comprehensive understanding of theses systems, partly in ex situ studies, partly under stationary reaction conditions and in some cases even under dynamic reaction conditions. Among the different available techniques, X-ray absorption spectroscopy (XAS) is a well-suited tool for this purpose as the different selected examples highlight. Two different techniques, scanning and full-field X-ray microscopy/tomography, are described and compared. At first, the tomographic structure of impregnated alumina pellets is presented using full-field transmission microtomography and compared to the results obtained with a scanning X-ray microbeam technique to analyse the catalyst bed inside a catalytic quartz glass reactor. On the other hand, by using XAS in scanning microtomography, the structure and the distribution of Cu(0), Cu(I), Cu(II) species in a Cu/ZnO catalyst loaded in a quartz capillary microreactor could be reconstructed quantitatively on a virtual section through the reactor. An illustrating example for spatially resolved XAS under reaction conditions is the partial oxidation of methane over noble metal-based catalysts. In order to obtain spectroscopic information on the spatial variation of the oxidation state of the catalyst inside the reactor XAS spectra were recorded by scanning with a micro-focussed beam along the catalyst bed. Alternatively, full-field transmission imaging was used to efficiently determine the distribution of the oxidation state of a catalyst inside a reactor under reaction conditions. The new technical approaches together with quantitative data analysis and an appropriate in situ catalytic experiment allowed drawing important conclusions on the reaction mechanism, and the analytical strategy might be similarly applied in other case studies. The corresponding temperature profiles and the catalytic performance were measured by means of an IR-camera and mass spectrometric analysis. In a more advanced experiment the ignition process of the partial oxidation of methane was followed in a spatiotemporal manner which demonstrates that spatially resolved spectroscopic information can even be obtained in the subsecond scale.

03 NATURAL GAS↗

Electric and magnetic dipole strength in 112,114,116,118,120,124 Sn

Background: There is renewed interest in electric dipole strength distributions for a variety of reasons including the extraction of the dipole polarizability related to properties of the symmetry energy and a measure for the neutron skin thickness, understanding the structure of low-energy $\textit{E}$1 strength in nuclei with neutron excess, and establishing the systematics of the isovector giant dipole resonance (IVGDR). Inelastic proton scattering at energies of a few hundred MeV and very forward angles including 0° has been established as a tool for the study of electric and magnetic dipole strength distributions in nuclei. Purpose: The present work aims at a systematic investigation of the electric and magnetic dipole strength distributions in the chain of stable even-mass tin isotopes. Methods: Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295-MeV beam covering laboratory angles 0°–6° and excitation energies 6–22 MeV. Cross sections due to $\textit{E}$1 and $\textit{M}$1 excitations were extracted with a multipole decomposition analysis (MDA) and then converted to reduced transition probabilities with the “virtual photon method” for $\textit{E}$1 and the “unit cross section method” for $\textit{M}$1 excitations, respectively. Including a theory-aided correction for the high-excitation-energy region not covered experimentally, the electric dipole polarizability was determined from the $\textit{E}$1 strength distributions. Results: In this work, total photoabsorption cross sections derived from the $\textit{E}$1 and $\textit{M}$1 strength distributions show significant differences compared to those from previous ($\textit{γ, xn}$) experiments in the energy region of the IVGDR. The widths of the IVGDR deduced from the present data with a Lorentz parametrization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from empirical systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The $\textit{E}$1 strengths below neutron threshold show fair agreement in this work with results from ($\textit{γ, γ'}$) experiments on 112,116,120,124 Sn in the energy region between 6 and 7 MeV, where also isoscalar $\textit{E}$1 strength was found for 124 Sn. At higher excitation energies, large differences are observed, pointing to a different nature of the excited states with small ground-state branching ratios. The isovector spin-$\textit{M}$1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei. Conclusions: The present results contribute to the solution of a variety of nuclear structure problems including the systematics of the energy and width of the IVGDR, the structure of low-energy $\textit{E}$1 strength in nuclei, new constraints to energy density functionals (EDFs) aiming at a systematic description of the dipole polarizability across the nuclear chart, from which properties of the symmetry energy can be derived, and the systematics of the isovector spin-$\textit{M}$1 strength in heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Activation of intact bacteria and bacterial fragments mixed with agar as cloud droplets and ice crystals in cloud chamber experiments

Biological particles, including bacteria and bacterial fragments, have beenof much interest due to the special ability of some to nucleate ice atmodestly supercooled temperatures. This paper presents results from a recentstudy conducted on two strains of cultivated bacteria which suggest thatbacterial fragments mixed with agar, and not whole bacterial cells, serve ascloud condensation nuclei (CCN). Due to the absence of whole bacteria cellsin droplets, they are unable to serve as ice nucleating particles (INPs) inthe immersion mode under the experimental conditions. Experiments wereconducted at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA)cloud chamber at the Karlsruhe Institute of Technology (KIT) by injectingbacteria-containing aerosol samples into the cloud chamber and inducing cloudformation by expansion over a temperature range of -5 to -12 ° C.Cloud droplets and ice crystals were sampled through a pumped counterflowvirtual impactor inlet (PCVI) and their residuals were characterized with asingle particle mass spectrometer (miniSPLAT). The size distribution of theoverall aerosol was bimodal, with a large particle mode composed of intactbacteria and a mode of smaller particles composed of bacterial fragmentsmixed with agar that were present in higher concentrations. Results fromthree expansions with two bacterial strains indicate that the cloud dropletresiduals had virtually the same size distribution as the smaller particlesize mode and had mass spectra that closely matched those of bacterialfragments mixed with agar. The characterization of ice residuals that weresampled through an ice-selecting PCVI (IS-PCVI) also shows that the sameparticles that activate to form cloud droplets, bacteria fragments mixed withagar, were the only particle type observed in ice residuals. These resultsindicate that the unavoidable presence of agar or other growth media inall laboratory studies conducted on cultivated bacteria can greatlyaffect the results and needs to be considered when interpreting CCN and INactivation data.

54 ENVIRONMENTAL SCIENCES↗

Excited Baryon Structure Using KY Exclusive Reactions with CLAS12

Studying excited nucleon structure via exclusive KY electroproduction will be an important tool for exploring the non-perturbative strong interaction. Electrocouplings for low-lying N? states (<1.7 GeV) have been determined from analyses of CLAS ?N and ??N data. This work made clear that consistency of independent analyses of exclusive channels with different couplings and non-resonant contributions is essential to have confidence in the extracted results. In terms of hadronic coupling, most high-lying N? states preferentially decay through the ??N channel instead of ?N. Data from the KY channels will therefore be critical to provide an independent analysis to compare the extracted electrocouplings for the high-lying N? states against those determined from the ??N channel from an already approved CLAS12 12-GeV experiment. A new experiment that will focus on N??KY decays using CLAS12 at JLab will be discussed that will measure differential cross sections to be used as input to extract the ?vNN? transition form factors for the most prominent N? states in the range of invariant energy W from 1.6 to 3~GeV in the virtually unexplored domain of momentum transfers Q2 up to 12~GeV2.

Carman, Daniel↗

Excited Baryon Structure Using KY Exclusive Reactions with CLAS12

Studying excited nucleon structure via exclusive KY electroproduction will be an important tool for exploring the non-perturbative strong interaction. Electrocouplings for low-lying N? states (<1.7 GeV) have been determined from analyses of CLAS ?N and ??N data. This work made clear that consistency of independent analyses of exclusive channels with different couplings and non-resonant contributions is essential to have confidence in the extracted results. In terms of hadronic coupling, most high-lying N? states preferentially decay through the ??N channel instead of ?N. Data from the KY channels will therefore be critical to provide an independent analysis to compare the extracted electrocouplings for the high-lying N? states against those determined from the ??N channel from an already approved CLAS12 12-GeV experiment. A new experiment that will focus on N??KY decays using CLAS12 at JLab will be discussed that will measure differential cross sections to be used as input to extract the ?vNN? transition form factors for the most prominent N? states in the range of invariant energy W from 1.6 to 3~GeV in the virtually unexplored domain of momentum transfers Q2 up to 12~GeV2.

Carman, Daniel↗

Qualification of the First ICS-3000 ION Chromatograph for use at the Defense Waste Processing Facility

The ICS-3000 Ion Chromatography (IC) system installed in 221-S M-13 has been qualified for use. The qualification was a head to head comparison of the ICS-3000 with the currently used DX-500 IC system. The crosscheck work included standards for instrument calibration and calibration verifications and standards for individual anion analysis, where the standards were traceable back to the National Institute of Standards and Technology (NIST). In addition the crosscheck work included the analysis of simulated Sludge Receipt Adjustment Tank (SRAT) Receipt, SRAT Product, and Slurry Mix Evaporator (SME) samples, along with radioactive Sludge Batch 5 material from the SRAT and SME tanks. Based upon the successful qualification of the ICS-3000 in M-13, it is recommended that this task proceed in developing the data to qualify, by a head to head comparison of the two ICS-3000 instruments, a second ICS-3000 to be installed in M-14. The Defense Waste Processing Facility (DWPF) requires the analysis of specific anions at various stages of its processing of high level waste (HLW). The anions of interest to the DWPF are fluoride, formate, chloride, nitrite, nitrate, sulfate, oxalate, and phosphate. The anion analysis is used to evaluate process chemistry including formic acid/nitric acid additions to establish optimum conditions for mercury stripping, reduction-oxidation (REDOX) chemistry for the melter, nitrite destruction, organic acid constituents, etc. The DWPF Laboratory (Lab) has been using Dionex DX-500 ion chromatography (IC) systems since 1998. The vendor informed DWPF in 2006 that the instruments would no longer be supported by service contracts after 2008. DWPF purchased three new ICS-3000 systems in September of 2006. The ICS-3000 instruments are (a) designed to be more stable using an eluent generator to make eluent, (b) require virtually no daily chemical handling by the analysts, (c) require less line breaks in the hood, and (d) generally require less maintenance due to the pump configuration only using water versus the current system where the pump uses various hydroxide concentrations. The ICS-3000 instruments also allow the DWPF to maintain current service contracts, which support routine preventive maintenance and emergency support for larger problems such as component failure. One of the three new systems was set up in the DWPF Lab trailers in January of 2007 to be used for the development of methods and procedures. This system will continue to be used for training, new method development and potential improvements to current methods. The qualification of the other two ICS-3000 instruments is to be a phased effort. This effort is to be supported by the Applied Computational Engineering and Statistical (ACES) group of the Savannah River National Laboratory (SRNL) as authorized by the Technical Task Request (TTR) and as directed by the corresponding Task Technical and Quality Assurance (TT&QA) plan. The installation of the first 'rad' system into the M-13 Lab module required modifications to both the Lab module and to the radiohood. The installation was completed in July 2008. The testing of this system was conducted as directed by the TT&QA plan. The purpose of this technical report is to provide a review of the data generated by these tests that will lead to the recommendation for the qualification of the M-13 ICS-3000 instrument. With the successful qualification of this first ICS-3000, plans will be developed for the installation of the second 'rad' system in the M-14 Lab module later in fiscal year 2009. When the second 'rad' ICS-3000 system is installed, the DX-500 systems will be removed and retired from service.

47 OTHER INSTRUMENTATION↗

Nucleon resonance structure studies via exclusive KY electroproduction

Studying the structure of excited nucleon states employing the electroproduction of exclusive reactions is an important avenue for exploring the nature of the non-perturbative strong interaction. The electrocouplings of $N^*$ states in the mass range below 1.8~GeV have been determined from analyses of CLAS $\pi N$, $\eta N$, and $\pi \pi N$ data. This work has made it clear that consistent results from independent analyses of several exclusive channels with different couplings and non-resonant backgrounds but the same $N^*$ electro excitation amplitudes, is essential to have confidence in the extracted results. In terms of hadronic coupling, many high-lying $N^*$ states preferentially decay through the $\pi \pi N$ channel instead of $\pi N$. Data from the $KY$ channels will therefore be critical to provide an independent analysis to compare the extracted electrocouplings for the high-lying $N^*$ states against those determined from the $\pi N$ and $\pi \pi N$ channels. Lastly, a program to study excited $N^*$ state structure in both non-strange and strange exclusive electroproduction channels using CLAS12 will measure differential cross sections and polarization observables to be used as input to extract the $\gamma_vNN^*$ electrocoupling amplitudes for the most prominent $N^*$ states in the range of invariant energy $W$ up 3~GeV in the virtually unexplored domain of momentum transfers $Q^2$ up to 12~GeV$^2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Symmetric Active/Active Metadata Service for High Availability Parallel File Systems

High availability data storage systems are critical for many applications as research and business become more data-driven. Since metadata management is essential to system availability, multiple metadata services are used to improve the availability of distributed storage systems. Past research focused on the active/standby model, where each active service has at least one redundant idle backup. However, interruption of service and even some loss of service state may occur during a fail-over depending on the used replication technique. In addition, the replication overhead for multiple metadata services can be very high. The research in this paper targets the symmetric active/active replication model, which uses multiple redundant service nodes running in virtual synchrony. In this model, service node failures do not cause a fail-over to a backup and there is no disruption of service or loss of service state. We further discuss a fast delivery protocol to reduce the latency of the needed total order broadcast. Our prototype implementation shows that metadata service high availability can be achieved with an acceptable performance trade-off using our symmetric active/active metadata service solution.

99 GENERAL AND MISCELLANEOUS↗