Recent advances concerning the transport properties of dilute gases.
Gas dynamics, discussing viscosity, thermoconductivity and diffusion coefficients
TRANSPORT PROPERTY↗
SEARCH · Engineering Papers
Results for “DYNAMIC PROPERTY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification
This paper attempts to gain an understanding of the effect of lamellar length scale on the mechanical properties of two-phase metal-intermetallic eutectic structure. We first develop a molecular dynamics model for the in-situ grown eutectic interface followed by a model of deformation of Al-Al{sub 2}Cu lamellar eutectic. Leveraging the insights obtained from the simulation on the behaviour of dislocations at different length scales of the eutectic, we present and explain the experimental results on Al-Al{sub 2}Cu eutectic with various different lamellar spacing. The physics behind the mechanism is further quantified with help of atomic level energy model for different length scale as well as different strain. An atomic level energy partitioning of the lamellae and the interface regions reveals that the energy of the lamellae core are accumulated more due to dislocations irrespective of the length-scale. Whereas the energy of the interface is accumulated more due to dislocations when the length-scale is smaller, but the trend is reversed when the length-scale is large beyond a critical size of about 80 nm.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Dynamic Modeling Accuracy Dependence on Errors in Sensor Measurements, Mass Properties, and Aircraft Geometry
A nonlinear simulation of the NASA Generic Transport Model was used to investigate the effects of errors in sensor measurements, mass properties, and aircraft geometry on the accuracy of dynamic models identified from flight data. Measurements from a typical system identification maneuver were systematically and progressively deteriorated and then used to estimate stability and control derivatives within a Monte Carlo analysis. Based on the results, recommendations were provided for maximum allowable errors in sensor measurements, mass properties, and aircraft geometry to achieve desired levels of dynamic modeling accuracy. Results using other flight conditions, parameter estimation methods, and a full-scale F-16 nonlinear aircraft simulation were compared with these recommendations.
Grauer, Jared A.↗
Merger Response of Halo Anisotropy Properties
Anisotropy properties—halo spin, shape, position offset, velocity offset, and orientation—are an important family of dark matter halo properties that indicate the level of directional variation of the internal structures of halos. These properties reflect the dynamical state of halos, which in turn depends on the mass assembly history. In this work, we study the evolution of anisotropy properties in response to merger activity using the IllustrisTNG simulations. We find that the response trajectories of the anisotropy properties significantly deviate from secular evolution. These trajectories have the same qualitative features and timescales across a wide range of merger and host properties. We propose explanations for the behavior of these properties and connect their evolution to the relevant stages of merger dynamics. We measure the relevant dynamical timescales. We also explore the dependence of the strength of the response on time of merger, merger ratio, and mass of the main halo. These results provide insight into the physics of halo mergers and their effects on the statistical behavior of halo properties. This study paves the way toward a physical understanding of scaling relations, particularly to how systematics in their scatter are connected to the mass assembly histories of halos.
79 ASTRONOMY AND ASTROPHYSICS↗
Tailored ultrasound propagation in microscale metamaterials via inertia design
The quasi-static properties of micro-architected (meta)materials have been extensively studied over the past decade, but their dynamic responses, especially in acoustic metamaterials with engineered wave propagation behavior, represent a new frontier. However, challenges in miniaturizing and characterizing acoustic metamaterials in high-frequency (megahertz) regimes have hindered progress toward experimentally implementing ultrasonic-wave control. Here, we present an inertia design framework based on positioning microspheres to tune responses of 3D microscale metamaterials. We demonstrate tunable quasi-static stiffness by up to 75% and dynamic longitudinal-wave velocities by up to 25% while maintaining identical material density. Using noncontact laser-based dynamic experiments of tunable elastodynamic properties and numerical demonstrations of spatio-temporal ultrasound wave propagation, we explore the tunable static and elastodynamic property relation. This design framework expands the quasi-static and dynamic metamaterial property space through simple geometric changes, enabling facile design and fabrication of metamaterials for applications in medical ultrasound and analog computing.
42 ENGINEERING↗
Accelerated Testing of Polymeric Composites Using the Dynamic Mechanical Analyzer
Creep properties of IM7/K3B composite material were obtained using three accelerated test methods at elevated temperatures. Results of flexural creep tests using the dynamic mechanical analyzer (DMA) were compared with results of conventional tensile and compression creep tests. The procedures of the three test methods are described and the results are presented. Despite minor differences in the time shift factor of the creep compliance curves, the DMA results compared favorably with the results from the tensile and compressive creep tests. Some insight is given into establishing correlations between creep compliance in flexure and creep compliance in tension and compression. It is shown that with careful consideration of the limitations of flexure creep, a viable and reliable accelerated test procedure can be developed using the DMA to obtain the viscoelastic properties of composites in extreme environments.
Abdel-Magid, Becky M.↗
Combined experimental and theoretical assessments of the lattice dynamics and optoelectronics of TaON and Ta{sub 3}N{sub 5}
Presented herein is a detailed discussion of the properties of the lattice dynamic and optoelectronic properties of tantalum(V) oxynitride (TaON) and tantalum(V) nitride (Ta{sub 3}N{sub 5}), from experimental and theoretical standpoint. The active Raman and infra red (IR) frequencies of TaON and Ta{sub 3}N{sub 5} were measured using confocal Raman and Fourier Transform Infrared spectroscopies (FTIR) and calculated using the linear response method within the density functional perturbation theory (DFPT). The detailed study leads to an exhaustive description of the spectra, including the symmetry of the vibrational modes. Electronic structures of these materials were computed using DFT within the range-separated hybrid HSE06 exchange–correlation formalism. Electronic and ionic contributions to the dielectric constant tensors of these materials were obtained from DFPT within the linear response method using the PBE functional. Furthermore, effective mass of photogenerated holes and electrons at the band edges of these compounds were computed from the electronic band structure obtained at the DFT/HSE06 level of theory. The results suggest that anisotropic nature in TaON and Ta{sub 3}N{sub 5} is present in terms of dielectric constant and effective masses. - Graphical abstract: Detailed investigation has been conducted from combined experimental and theoretical approaches on Raman and IR spectroscopies, electronic structures, dielectric constants and effective masses of TaON and Ta{sub 3}N{sub 5}. - Highlights: • Crystal structures of TaON and Ta{sub 3}N{sub 5} are discussed based on XRD and DFT calculation. • Raman and IR spectra of TaON and Ta{sub 3}N{sub 5} materials are measured and computed by DFPT method. • Optoelectronic properties of TaON and Ta{sub 3}N{sub 5} are discussed. • Dielectric constant and effective masses of TaON and Ta{sub 3}N{sub 5} are calculated.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tungsten Ditelluride: a layered semimetal
Tungsten ditelluride (WTe2) is a transition metal dichalcogenide (TMD) with physical and electronic properties that make it attractive for a variety of electronic applications. Although WTe2 has been studied for decades, its structure and electronic properties have only recently been correctly described. We experimentally and theoretically investigate the structure, dynamics and electronic properties of WTe2, and verify that WTe2 has its minimum energy configuration in a distorted 1T structure (Td structure), which results in metallic-like transport. Our findings unambiguously confirm the metallic nature of WTe2, introduce new information about the Raman modes of Td-WTe2, and demonstrate that Td-WTe2 is readily oxidized via environmental exposure. Finally, these findings confirm that, in its thermodynamically favored Td form, the utilization of WTe2 in electronic device architectures such as field effect transistors may need to be reevaluated.
36 MATERIALS SCIENCE↗
Atomic Dynamics in Real Space and Time
Atomic and molecular dynamics in strongly disordered matter, such as liquid, cannot be fully described in terms of phonons, because they are marginalized and often overdamped. Their dynamic and transport properties depend on local atomic rearrangements which are strongly correlated. To describe such local dynamics, the usual representation in momentum (Q) and energy (E) space in terms of the dynamic structure factor, S(Q, E), is not effective. We discuss an alternative approach in real space (r) and time (t), with the van Hove function, G(r, t), and show how this approach facilitates understanding of real-space local dynamics of liquids and other disordered systems in the length scale of Å and time scale of pico-second.
Egami, Takeshi↗
Effects of confinement and pressure on the structure and dynamics of carbon dioxide in silica slit pores
An understanding of carbon dioxide fluid properties within geological mesopores is important in applications ranging from carbon sequestration to shale oil recovery. Here, a molecular dynamics study is presented that aims to shed light on these systems by simulation of CO 2 fluid confined in β-cristobalite silica slit pores with different pore widths and pressure conditions. The weakly associating nature of carbon dioxide leads to little difference in structural and interfacial dynamical properties for different pore sizes and pressures. Rather, the behavior is found to be dominated by the entropic effects, namely, how the CO 2 organizes next to the silica surface. The CO 2 self-diffusion coefficient shows the strongest pore size dependence. It is strongly diminished in small pores and does not reach the bulk fluid value even in 6 nm pores. It also decreases with pressure, yielding an activation volume that increases with pore size. These results provide new insight into the behavior of a compressible fluid in nanoscale confinement.
Godahewa, Sahan M. [Univ. of Kansas, Lawrence, KS ↗
Nanoscale Probing of Dynamics in Local Molecular Environments
Vibrational spectroscopy can provide information about structure, coupling, and dynamics underlying the properties of complex molecular systems. While measurements of spectral line broadening can probe local chemical environments, the spatial averaging in conventional spectroscopies limits insight into underlying heterogeneity, in particular in disordered molecular solids. Here, using femtosecond infrared scattering scanning near-field optical microscopy (IR s-SNOM), we resolve in vibrational free-induction decay (FID) measurements a high degree of spatial heterogeneity in polytetrafluoroethylene (PTFE) as a dense molecular model system. In nanoscopic probe volumes as small as 103 vibrational oscillators, we approach the homogeneous response limit, with extended vibrational dephasing times of several picoseconds, that is, up to 10 times the inhomogeneous lifetime, and spatial average converging to the bulk ensemble response. We simulate the dynamics of relaxation with a finite set of local vibrational transitions subject to random modulations in frequency. The combined results suggest that the observed heterogeneity arises due to static and dynamic variations in the local molecular environment. This approach thus provides real-space and real-time visualization of the subensemble dynamics that define the properties of many functional materials.
Atkin, Joanna M.↗
A convergence study for SPDEs using combined Polynomial Chaos and Dynamically-Orthogonal schemes
We study the convergence properties of the recently developed Dynamically Orthogonal (DO) field equations [1] in comparison with the Polynomial Chaos (PC) method. To this end, we consider a series of one-dimensional prototype SPDEs, whose solution can be expressed analytically, and which are associated with both linear (advection equation) and nonlinear (Burgers equation) problems with excitations that lead to unimodal and strongly bi-modal distributions. We also propose a hybrid approach to tackle the singular limit of the DO equations for the case of deterministic initial conditions. The results reveal that the DO method converges exponentially fast with respect to the number of modes (for the problems considered) giving same levels of computational accuracy comparable with the PC method but (in many cases) with substantially smaller computational cost compared to stochastic collocation, especially when the involved parametric space is high-dimensional.
97 MATHEMATICS AND COMPUTING↗
Integrity Constraint Monitoring in Software Development: Proposed Architectures
In the development of complex software systems, designers are required to obtain from many sources and manage vast amounts of knowledge of the system being built and communicate this information to personnel with a variety of backgrounds. Knowledge concerning the properties of the system, including the structure of, relationships between and limitations of the data objects in the system, becomes increasingly more vital as the complexity of the system and the number of knowledge sources increases. Ensuring that violations of these properties do not occur becomes steadily more challenging. One approach toward managing the enforcement or system properties, called context monitoring, uses a centralized repository of integrity constraints and a constraint satisfiability mechanism for dynamic verification of property enforcement during program execution. The focus of this paper is to describe possible software architectures that define a mechanism for dynamically checking the satisfiability of a set of constraints on a program. The next section describes the context monitoring approach in general. Section 3 gives an overview of the work currently being done toward the addition of an integrity constraint satisfiability mechanism to a high-level program language, SequenceL, and demonstrates how this model is being examined to develop a general software architecture. Section 4 describes possible architectures for a general constraint satisfiability mechanism, as well as an alternative approach that, uses embedded database queries in lieu of an external monitor. The paper concludes with a brief summary outlining the, current state of the research and future work.
Fernandez, Francisco G.↗
Bond Valences and Anharmonicity in Vacancy-Ordered Double Perovskite Halides
We report that anharmonic lattice dynamics are intimately linked with optical and electronic properties in perovskite halides semiconductors. Vacancy-ordered double perovskites are a subset of the perovskite halide family containing isolated octahedral units. The absence of polyhedral connectivity engenders the vacancy-ordered double perovskites with additional degrees of dynamic freedom, which presents an ideal structural framework to study dynamic-property relationships in perovskite halide semiconductors. In the present study, we examine the structure and bonding origins of anharmonicity in the vacancy-ordered double perovskites Cs 2 Sn 1-x Te x I 6 . While X-ray diffraction indicates that all members adopt the cubic vacancy-ordered double perovskite structure, the local coordination environment probed by X-ray pair distribution function (XPDF) analysis reveals asymmetry of the Cs–I/I–I pair correlation that smoothly decreases with increasing tellurium content. Temperature-dependent neutron total scattering suggests that this asymmetry in the PDF occurs due to anharmonic lattice dynamics arising from octahedral tilting and Cs + displacements, as supported by Reverse Monte Carlo simulations of the Cs 2 SnI 6 and Cs 2 TeI 6 end members. We further correlate the trends in asymmetry and anharmonicity with the bond valence sum of the Cs + ion, and find that the anharmonicity vanishes when the bonding preferences of the Cs + are satisfied by the size of the cuboctahedral void. Lastly, this study presents a simple and effective approach for understanding the origin of anharmonicity in vacancy-ordered double perovskite materials.
36 MATERIALS SCIENCE↗
Physical properties of zircon and scheelite lutetium orthovanadate: Experiment and first-principles calculation
Pure zircon and scheelite LuVO{sub 4} were prepared by solid state reaction and high-pressure route, respectively. Structure, elastic constants, lattice dynamics and thermodynamics of LuVO{sub 4} polymorphs were studied by experiments and first principles calculation. Calculations here are in good agreement with the experimental results. The phonon dispersions of LuVO{sub 4} polymorphs were studied by the linear response method. The calculated phonon dispersions show that zircon and scheelite LuVO{sub 4} phases are dynamically stable. Raman-active frequencies were measured and assigned to different modes according to the calculations. The internal frequencies shift downward after phase transition from zircon to scheelite. Born effective charge tensors elements for both phases are analyzed. The finite temperature thermodynamic properties of LuVO{sub 4} polymorphs were calculated from the obtained phonon density of states by quasi-harmonic approach. - Graphical abstract: Lutetium orthovanadate polymorphs were synthesized by SSR and HP methods and their physical and chemical properties, including lattice dynamical properties, were determined by DFT calculations and experiments. Display Omitted - Highlights: • Pure zircon and scheelite LuVO{sub 4} polymorphs were synthesized by solid state reaction and high-pressure route. • Chemical and physical properties of LuVO4 polymorphs were studied by experiments and first principles calculation. • Raman-active frequencies were measured and assigned to different modes according to the calculations. • Lattice dynamics of polymorphs were discussed in details.
36 MATERIALS SCIENCE↗
What sets the splashback radius of dark matter haloes: accretion history or other properties?
The density profiles of dark matter haloes contain rich information about their growth history and physical properties. One particularly interesting region is the splashback radius, R sp , which marks the transition between particles orbiting in the halo and particles undergoing first infall. While the dependence of R sp on the recent accretion rate is well-established and theoretically expected, it is not clear exactly what parts of the accretion history R sp responds to, and what other halo properties might additionally influence its position. Here, we comprehensively investigate these questions by correlating the dynamically measured splashback radii of a large set of simulated haloes with their individual growth histories as well as their structural, dynamical, and environmental properties. We find that R sp is sensitive to the accretion over one crossing time but largely insensitive to the prior history (in contrast to concentration, which probes earlier epochs). All secondary correlations are much weaker, but we discern a relatively higher R sp in less massive, older, more elliptical, and more tidally deformed haloes. Despite these minor influences, we conclude that the splashback radius is a clean indicator of a halo’s growth over the past dynamical time. We predict that the magnitude gap should be a promising observable indicator of a halo’s accretion rate and splashback radius.
79 ASTRONOMY AND ASTROPHYSICS↗
Novel experimental probes of QCD in SIDIS and e + e - annihilation (Final Technical Report)
The research addressed with this award seeks to advance our understanding of the structure and dynamics underlying the properties of visible matter. In our current understanding the nucleons (protons and neutrons) are not fundamental but are comprised of quarks and gluons, which are collectively called partons. A static quark picture fails to explain the properties of the nucleons, such as their mass and intrinsic spin, which are thought to emerge dynamically from the quark-gluon interactions via the strong force. In this work, novel observables employing correlations of particles produced in the scattering of high energy electrons off protons at the CLAS12 experiment at Jefferson Lab were analyzed to probe quark-gluon interactions. The ultimate goal of this line of inquiry is to be able to describe the properties of protons and neutrons from first principles, similar to how studying the hydrogen atom has led to the formulation of the theory of Quantum Electrodynamics. Because quarks cannot be observed directly but only as part of more complex composite particles, a smaller, complimentary part of this work was the analysis of particle production in electron-positron annihilation at the Belle II experiment to understand the production of particles from initial quarks. This takes advantage of the fact that in e + e - annihilation the initial quark dynamics is known, unlike in the scattering of nucleons. Several new applications using Machine Learning algorithms for event tagging and reconstruction to support this program were developed as part of this award. In addition, we had a significant role in the development of the physics program for the future Electron-Ion Collider, which is a new collider to be build in the US within the next decade.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
The In Situ Ion Irradiation Toolbox: Time-Resolved Structure and Property Measurements
Abstract The dynamic interactions of ions with matter drive a host of complex evolution mechanisms, requiring monitoring on short spatial and temporal scales to gain a full picture of a material response. Understanding the evolution of materials under ion irradiation and displacement damage is vital for many fields, including semiconductor processing, nuclear reactors, and space systems. Despite materials in service having a dynamic response to radiation damage, typical characterization is performed post-irradiation, washing out all information from transient processes. Characterizing active processes in situ during irradiation allows the mechanisms at play during the dynamic ion-material interaction process to be deciphered. In this review, we examine the in situ characterization techniques utilized for examining material structure, composition, and property evolution under ion irradiation. Covering analyses of microstructure, surface composition, and material properties, this work offers a perspective on the recent advances in methods for in situ monitoring of materials under ion irradiation, including a future outlook examining the role of complementary and combined characterization techniques in understanding dynamic materials evolution.
36 MATERIALS SCIENCE↗