Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coupled Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Influence of the Angle of Attack on the Aerothermodynamics of the Mars Science Laboratory

An investigation of the effects of the incidence angle on the aerothermodynamic environments of the Mars Science Laboratory has been conducted. Flight conditions of peak heating, peak deceleration and chute deploy are selected and the effects of the angle of attack on the aerodynamics and aerothermodynamics are analyzed. The investigation found that static aerodynamics are well behaved within the considered range of incidence angles. Leeside laminar and turbulent computed heating rates decrease with incidence, despite the increase in the leeside running length. Stagnation point was found to stay on the conical flank at all angles of attack, and this is linked to the rapid flow expansion around the shoulder. Hypersonic lift to drag ratio is limited by the heating rates in the region of the windside shoulder. The effects of the high angle of incidence on the dynamic aero at low Mach remains to be determined. Influence of the angle of attack on the smooth-wall transition parameter indicates, that higher angle of attack flight may result in delayed turbulence onset, however, a coupled analysis, involving flight trajectory simulation is necessary.

Dyakonov, Artem A.↗
NASA NTRS2008

Testing of Cloud Microphysics Scheme with Snow Events

One of the grand challenges of the Global Precipitation Measurement (GPM) mission is to improve precipitation measurements in mid- and high-latitudes during cold seasons through the use of high-frequency passive microwave radiometry. For this, the Weather Research Forecast (WRF) model with the Goddard microphysics scheme is coupled with the Satellite Data Simulation Unit (WRF-SDSU) that has been developed to facilitate the over-snowfall retrieval algorithm by providing virtual cloud library and microwave brightness temperature (To) measurements consistent to the GPM Microwave Imager (GMI). This study tested the Goddard cloud microphysics scheme in WRF in snowstorm events (January 20-22, 2007) over the Canadian CloudSat/CALIPSO Validation Project (C3VP) site up in Ontario, Canada. In this meeting, we will present the performance of the Goddard cloud microphysics scheme both with 2ice (ice and snow) and 3ice (ice, snow and graupel) as well as other WRF microphysics schemes. Results will be compared with the King Radar data. We will also use the WRF model outputs to drive the Goddard SDSU to calculate radiances and backscattering signals consistent to satellite direct observations. These simulated radiance are evaluated against the measurement from A-Train satellites.

Tao, Wei-Kuo↗
NASA NTRS2009

The 20-22 January 2007 Snow Events over Canada: Microphysical Properties

One of the grand challenges of the Global Precipitation Measurement (GPM) mission is to improve precipitation measurements in mid- and high-latitudes during cold seasons through the use of high-frequency passive microwave radiometry. Toward this end, the Weather Research and Forecasting (WRF) model with the Goddard microphysics scheme is coupled with a Satellite Data Simulation Unit (WRF-SDSU) that has been developed to facilitate over-land snowfall retrieval algorithms by providing a virtual cloud library and microwave brightness temperature (Tb) measurements consistent with the GPM Microwave Imager (GMI). This study tested the Goddard cloud microphysics scheme in WRF for snowstorm events (January 20-22, 2007) that took place over the Canadian CloudSAT/CALIPSO Validation Project (C3VP) ground site (Centre for Atmospheric Research Experiments - CARE) in Ontario, Canada. In this paper, the performance of the Goddard cloud microphysics scheme both with 2ice (ice and snow) and 3ice (ice, snow and graupel) as well as other WRF microphysics schemes will be presented. The results are compared with data from the Environment Canada (EC) King Radar, an operational C-band radar located near the CARE site. In addition, the WRF model output is used to drive the Goddard SDSU to calculate radiances and backscattering signals consistent with direct satellite observations for evaluating the model results.

Tao. W.K.↗
NASA NTRS2008

NASA Tech Briefs, June 2008

Topics covered include: Charge-Control Unit for Testing Lithium-Ion Cells; Measuring Positions of Objects Using Two or More Cameras; Lidar System for Airborne Measurement of Clouds and Aerosols; Radiation-Insensitive Inverse Majority Gates; Reduced-Order Kalman Filtering for Processing Relative Measurements; Spaceborne Processor Array; Instrumentation System Diagnoses a Thermocouple; Chromatic Modulator for a High-Resolution CCD or APS; Commercial Product Activation Using RFID; Cup Cylindrical Waveguide Antenna; Aerobraking Maneuver (ABM) Report Generator; ABM Drag_Pass Report Generator; Transformation of OODT CAS to Perform Larger Tasks; Visualization Component of Vehicle Health Decision Support System; Mars Reconnaissance Orbiter Uplink Analysis Tool; Problem Reporting System; G-Guidance Interface Design for Small Body Mission Simulation; DSN Scheduling Engine; Replacement Sequence of Events Generator; Force-Control Algorithm for Surface Sampling; Tool for Merging Proposals Into DSN Schedules; Micromachined Slits for Imaging Spectrometers; Fabricating Nanodots Using Lift-Off of a Nanopore Template; Making Complex Electrically Conductive Patterns on Cloth; Special Polymer/Carbon Composite Films for Detecting SO2; Nickel-Based Superalloy Resists Embrittlement by Hydrogen; Chemical Passivation of Li+-Conducting Solid Electrolytes; Organic/Inorganic Polymeric Composites for Heat-Transfer Reduction; Composite Cathodes for Dual-Rate Li-Ion Batteries; Improved Descent-Rate Limiting Mechanism; Alignment-Insensitive Lower-Cost Telescope Architecture; Micro-Resistojet for Small Satellites; Using Piezoelectric Devices to Transmit Power through Walls; Miniature Latching Valve; Apparatus for Sampling Surface Contamination; Novel Species of Non-Spore-Forming Bacteria; Chamber for Aerosol Deposition of Bioparticles; Hyperspectral Sun Photometer for Atmospheric Characterization and Vicarious Calibrations; Dynamic Stability and Gravitational Balancing of Multiple Extended Bodies; Simulation of Stochastic Processes by Coupled ODE-PDE; Cluster Inter-Spacecraft Communications; Genetic Algorithm Optimizes Q-LAW Control Parameters; Low-Impact Mating System for Docking Spacecraft; Non-Destructive Evaluation of Materials via Ultraviolet Spectroscopy; Gold-on-Polymer-Based Sensing Films for Detection of Organic and Inorganic Analytes in the Air; and Quantum-Inspired Maximizer.

Source record↗
NASA NTRS2006

HFGMC Enhancement of MAC/GMC

Additional information about a mathematical model denoted the high-fidelity generalized method of cells (HFGMC) and implementation of the HFGMC within version 4.0 of the MAC/GMC software has become available. MAC/GMC (Micromechanics Analysis Code With Generalized Method of Cells) was a topic of several prior NASA Tech Briefs articles, version 4.0 having been described in "Comprehensive Micromechanics-Analysis Code - Version 4.0" (LEW-17495-1), NASA Tech Briefs, Vol. 29, No. 9 (September 2005), page 54. MAC/GMC predicts elastic and inelastic thermomechanical responses of composite materials. MAC/GMC utilizes the generalized method of cells (GMC) - a model of micromechanics that predicts macroscopic responses of a composite material as functions of the properties, sizes, shapes, and responses of its constituents (e.g., matrix and fibers). The accuracy of the GMC is limited by neglect of coupling between normal and shear stresses. The HFGMC was developed by combining elements of the GMC and a related model, denoted the higher-order theory for functionally graded materials (HOTFGM), that can account for this coupling. Hence, the HFGMC enables simulation of stress and strain with greater accuracy. Some alterations of the MAC/GMC data structure were necessitated by the greater computational complexity of the HFGMC.

Arnold, Steven M.↗
NASA NTRS2012

Numerical Analysis Using WRF-SBM for the Cloud Microphysical Structures in the C3VP Field Campaign: Impacts of Supercooled Droplets and Resultant Riming on Snow Microphysics

Two distinct snowfall events are observed over the region near the Great Lakes during 19-23 January 2007 under the intensive measurement campaign of the Canadian CloudSat/CALIPSO validation project (C3VP). These events are numerically investigated using the Weather Research and Forecasting model coupled with a spectral bin microphysics (WRF-SBM) scheme that allows a smooth calculation of riming process by predicting the rimed mass fraction on snow aggregates. The fundamental structures of the observed two snowfall systems are distinctly characterized by a localized intense lake-effect snowstorm in one case and a widely distributed moderate snowfall by the synoptic-scale system in another case. Furthermore, the observed microphysical structures are distinguished by differences in bulk density of solid-phase particles, which are probably linked to the presence or absence of supercooled droplets. The WRF-SBM coupled with Goddard Satellite Data Simulator Unit (G-SDSU) has successfully simulated these distinctive structures in the three-dimensional weather prediction run with a horizontal resolution of 1 km. In particular, riming on snow aggregates by supercooled droplets is considered to be of importance in reproducing the specialized microphysical structures in the case studies. Additional sensitivity tests for the lake-effect snowstorm case are conducted utilizing different planetary boundary layer (PBL) models or the same SBM but without the riming process. The PBL process has a large impact on determining the cloud microphysical structure of the lake-effect snowstorm as well as the surface precipitation pattern, whereas the riming process has little influence on the surface precipitation because of the small height of the system.

lake-effect↗
NASA NTRS2017

Is There a CME Rate Floor? CME and Magnetic Flux Values for the Last Four Solar Cycle Minima

The recent prolonged activity minimum has led to the question of whether there is a base level of the solar magnetic field evolution that yields a ''floor'' in activity levels and also in the solar wind magnetic field strength. Recently, a flux transport model coupled with magneto-frictional simulations has been used to simulate the continuous magnetic field evolution in the global solar corona for over 15 years, from 1996 to 2012. Flux rope eruptions in the simulations are estimated (Yeates), and the results are in remarkable agreement with the shape of the SOlar Heliospheric Observatory/Large Angle and Spectrometric Coronagraph Experiment coronal mass ejection (CME) rate distribution. The eruption rates at the two recent minima approximate the observed-corrected CME rates, supporting the idea of a base level of solar magnetic activity. In this paper, we address this issue by comparing annual averages of the CME occurrence rates during the last four solar cycle minima with several tracers of the global solar magnetic field. We conclude that CME activity never ceases during a cycle, but maintains a base level of 1 CME every 1.5 to approx. 3 days during minima. We discuss the sources of these CMEs.

Webb, D. F.↗
NASA NTRS2018

Pliocene and Eocene Provide Best Analogs for Near-Future Climates

As the world warms due to rising greenhouse gas concentrations, the Earth system moves toward climate states without societal precedent, challenging adaptation. Past Earth system states offer possible model systems for the warming world of the coming decades. These include the climate states of the Early Eocene (ca. 50 Ma), the Mid-Pliocene (3.3–3.0 Ma), the Last Interglacial (129–116 ka), the Mid-Holocene (6 ka), preindustrial (ca. 1850 CE), and the 20th century. Here, we quantitatively assess the similarity of future projected climate states to these six geohistorical benchmarks using simulations from the Hadley Centre Coupled Model Version 3 (HadCM3), the Goddard Institute for Space Studies Model E2-R (GISS), and the Community Climate System Model, Versions 3 and 4 (CCSM) Earth system models. Under the Representative Concentration Pathway 8.5 (RCP8.5) emission scenario, by 2030 CE, future climates most closely resemble Mid-Pliocene climates, and by 2150 CE, they most closely resemble Eocene climates. Under RCP4.5, climate stabilizes at Pliocene-like conditions by 2040 CE. Pliocene-like and Eocene-like climates emerge first in continental interiors and then expand outward. Geologically novel climates are uncommon in RCP4.5 (<1%) but reach 8.7% of the globe under RCP8.5, characterized by high temperatures and precipitation. Hence, RCP4.5 is roughly equivalent to stabilizing at Pliocene-like climates, while unmitigated emission trajectories, such as RCP8.5, are similar to reversing millions of years of long-term cooling on the scale of a few human generations. Both the emergence of geologically novel climates and the rapid reversion to Eocene-like climates may be outside the range of evolutionary adaptive capacity.

climate change↗
NASA NTRS2018

A Satellite-Based Estimate of Combustion Aerosol Cloud Microphysical Effects over the Arctic Ocean

Climate predictions for the rapidly changing Arctic are highly uncertain, largely due to a poor understanding of the processes driving cloud properties. In particular, cloud fraction (CF) and cloud phase (CP) have major impacts on energy budgets, but are poorly represented in most models, often because of uncertainties in aerosol–cloud interactions. Here, we use over 10 million satellite observations coupled with aerosol transport model simulations to quantify large scale microphysical effects of aerosols on CF and CP over the Arctic Ocean during polar night, when direct and semi-direct aerosol effects are minimal. Combustion aerosols over sea ice are associated with very large (~10W/sq.m) differences in longwave cloud radiative effects at the sea ice surface. However, co-varying meteorological changes on factors such as CF likely explain the majority of this signal. For example, combustion aerosols explain at most 40% of the CF differences between the full dataset and the clean-condition subset, compared to between 57% and 91% of the differences that can be predicted by co-varying meteorology. After normalizing for meteorological regime, aerosol microphysical effects have small but significant impacts on CF, CP, and precipitation frequency on an Arctic-wide scale. These effects indicate that dominant aerosol–cloud microphysical mechanisms are related to the relative fraction of liquid-containing clouds, with implications for a warming Arctic.

Zamora, Lauren M.↗
NASA NTRS2018

The Ozone Water-Land Environmental Transition Study: An Innovative Strategy for Understanding Chesapeake Bay Pollution Events

Coastal regions have historically represented a significant challenge for air quality investigations because of water-land boundary transition characteristics and a paucity of measurements available over water. Prior studies have identified the formation of high levels of ozone over water bodies, such as the Chesapeake Bay, that can potentially recirculate back over land to significantly impact populated areas. Earth-observing satellites and forecast models face challenges in capturing the coastal transition zone where small-scale meteorological dynamics are complex and large changes in pollutants can occur on very short spatial and temporal scales. An observation strategy is presented to synchronously measure pollutants “over land” and “over water” to provide a more complete picture of chemical gradients across coastal boundaries for both the needs of state and local environmental management and new remote sensing platforms. Intensive vertical profile information from ozone lidar systems and ozonesondes, obtained at two main sites, one over land and the other over water, are complemented by remote sensing and in situ observations of air quality from ground-based, airborne (both personned and unpersonned), and shipborne platforms. These observations, coupled with reliable chemical transport simulations, such as the National Oceanic and Atmospheric Administration (NOAA) National Air Quality Forecast Capability (NAQFC), are expected to lead to a more fully characterized and complete land–water interaction observing system that can be used to assess future geostationary air quality instruments, such as the National Aeronautics and Space Administration (NASA) Tropospheric Emissions: Monitoring of Pollution (TEMPO), and current low-Earth-orbiting satellites, such as the European Space Agency’s Sentinel-5 Precursor (S5-P) with its Tropospheric Monitoring Instrument (TROPOMI).

Forecast Models↗
NASA NTRS2019

GEOS-Chem and the GMAO: Reaction, Replay and Reanalysis

This presentation summarizes the evolution of chemical modeling in the GMAO, showing how the parallel tracks for mission support, using forecasts over several days, and chemistry-climate coupling, using multi-decadal simulations, are converging in the future. The presentation emphasizes the new GEOS Composition Forecasting system (GEOS CF) and its potential role in future reanalyses of NASA's EOS Aura data and the testing needed to use this in chemistry-climate simulations.

Pawson, Steven↗
NASA NTRS2020

Impact of a Regional US Drought on Land and Atmospheric Carbon

The impacts of drought on regional land and atmospheric carbon are still poorly understood. Here we quantify the impact of a regional US drought on land carbon fluxes (Gross Primary Production, or GPP, and Net Biosphere Production, or NBP) and atmospheric carbon (CO2) by imposing an idealized 3-month meteorological drought in an ensemble of coupled land-atmosphere climate simulations. The imposed drought, applied to the lower Mississippi River Valley (~500,000 km (exp 2)), leads to a 23% GPP reduction in the drought area in the month immediately following the drought’s termination. The drought also caused GPP reductions in some remote areas through drought-induced impacts on remote meteorology, particularly the areas adjacent to the imposed drought. In the remote areas, the induced precipitation changes are responsible for most of the anomalous land productivity. The impact of the drought-induced meteorological anomalies on GPP is greater than that of the CO2 anomalies by at least an order of magnitude. While their impact on GPP is secondary, the drought-induced atmospheric CO2 anomalies near the land surface can be as large as 3.57ppm. The significant CO2 anomalies cover an area up to three times of that of the imposed drought, suggesting that atmospheric transport needs to be considered in the interpretation of drought-induced CO2 anomalies in the atmosphere. The imposed drought also leads to column-averaged CO2 increases of up to 0.78ppm, which is at the edge of the uncertainty from single soundings of current greenhouse gas (GHG) observing satellites.

Eunjee Lee↗
NASA NTRSDate not supplied

Performance Analysis of Optimized STARC-ABL Designs Across the Entire Mission Profile

Boundary layer ingestion (BLI) offers the potential for significant fuel burn reduction by exploiting strong aeropropulsive interactions. NASA’s STARC–ABL concept uses an electri- cally powered BLI tail cone thruster on what is otherwise a traditional airframe. Despite the traditional airframe of this configuration, aeropropulsive integration is critical to the perfor- mance of the BLI propulsor. Furthermore, due to being electrically powered, the fan pressure ratio and efficiency of the BLI tail cone thruster vary widely across the flight envelope, and this variation in fan performance must be accounted for with the aeropropulsive integration of the BLI system. Thus, accurate performance prediction for this novel propulsion configu- ration requires the use of a coupled aeropropulsive model across the flight envelope. In this work, we analyze the off-design performance of 18 optimized designs using an aeropropulsive model that is built with the OpenMDAO framework to couple 3-D RANS CFD simulations to 1-D thermodynamic cycle analyses. The designs are created via high-fidelity aeropropulsive design optimizations that span a range of fan pressure ratio and thrust values at the cruise conditions for the STARC-ABL concept, which was chosen as the aerodynamic design point for the propulsor. Performance analyses we present herein are then performed at a range of off-design flight conditions that span the flight envelope, including low-speed and low-altitude flight conditions. This study provides the first set of high-fidelity data for the STARC–ABL configuration at off-design conditions, and the results quantify the power savings through BLI compared to a traditional propulsion system across the entire mission profile.

optimization↗
NASA NTRS2021

Impacts of the Eruption of Mount Pinatubo on Surface Temperatures and Precipitation Forecasts With the NASA GEOS Subseasonal-to-Seasonal System

A contemporary seasonal forecasting system is used to study the impacts of a volcanic sulfate injection into the stratosphere on the seasonal forecasts for surface temperatures, the El Niño Southern Oscillation (ENSO), and precipitation. The focus is a case study of the June 1991 eruption of Mt. Pinatubo, Philippines and the period from July 1991 to February 1992. Version 2 of the Goddard Earth Observing System (GEOS) subseasonal-to-seasonal (S2S) forecasting system is used in this study. GEOS-S2S includes the GOddard Chemistry, Aerosols, Radiation and Transport (GOCART) aerosol module, which allows to prognostically simulate aerosol distributions. GOCART is coupled to the radiation and cloud modules to include the impact of the eruption on forecasted radiation and precipitation. The coupled GEOS-S2S system was initialized in May 1991 with fields based on observations to produce ten-member 9-month forecasts with and without the volcanic sulfur injection. The results of these ensemble experiments demonstrate that including Mt. Pinatubo in seasonal forecasts would improve the forecasts of the 1991–1992 global mean temperature and precipitation but worsen the forecast of ENSO by strengthening of El Niño beyond what showed in observations. Most significant changes in the forecasts of temperatures and precipitation are limited to the tropics. The only land area where the inclusion of Pinatubo significantly lowered the forecasted precipitation is tropical Africa.

Mt. Pinatubo↗
NASA NTRS2021

Radar-Based Bayesian Estimation of Ice Crystal Growth Parameters within a Microphysical Model

The potential for polarimetric Doppler radar measurements to improve predictions of ice microphysical processes within an idealized model–observational framework is examined. In an effort to more rigorously constrain ice growth processes (e.g., vapor deposition) with observations of natural clouds, a novel framework is developed to compare simulated and observed radar measurements, coupling a bulk adaptive-habit model of vapor growth to a polarimetric radar forward model. Bayesian inference on key microphysical model parameters is then used, via a Markov chain Monte Carlo sampler, to estimate the probability distribution of the model parameters. The statistical formalism of this method allows for robust estimates of the optimal parameter values, along with (non-Gaussian) estimates of their uncertainty. To demonstrate this framework, observations from Department of Energy radars in the Arctic during a case of pristine ice precipitation are used to constrain vapor deposition parameters in the adaptive habit model. The resulting parameter probability distributions provide physically plausible changes in ice particle density and aspect ratio during growth. A lack of direct constraint on the number concentration produces a range of possible mean particle sizes, with the mean size inversely correlated to number concentration. Consistency is found between the estimated inherent growth ratio and independent laboratory measurements, increasing confidence in the parameter PDFs and demonstrating the effectiveness of the radar measurements in constraining the parameters. The combined Doppler and polarimetric observations produce the highest-confidence estimates of the parameter PDFs, with the Doppler measurements providing a stronger constraint for this case.

Robert S. Schrom↗
DOE OSTI2023

Flow Induced Corrosion in 6061-T6 Aluminum Pipes in De-Ionized Water Environments

Flow induced corrosion/erosion of 6061-T6 aluminum in de-ionized (DI) water environments has not been studied widely. Especially, the long-term effects of corrosion/erosion in seemingly benign flow velocity, temperature, and resistivity ranges of 8 ft/s, 85 oF, 3-5 MOhm-cm, respectively. This study concludes that the flow induced corrosion/erosion in the above parameter ranges is minimal. This is detailed by presenting a literature survey, measuring pipe wall samples from a system that has operated in the above parameter range, predict the loss of material in mm/year at the above velocities and at higher temperatures using electric potential values from other experimental studies coupled with wall shear stress simulated using Computational Fluid Dynamic (CFD) analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Design of a neutral thermal scattering (NeTS) module for hydrogen in light water

The accurate representation of thermal scattering law (TSL) data is integral to the design and characterization of many modern nuclear systems, particularly those using light water as a moderator/coolant. As a material-dependent distribution over energy-momentum phase space, the TSL may exhibit a variety of unique and relevant conditional (e.g., temperature, pressure) and compositional (e.g., porosity, stoichiometry, radiation damage) dependencies. Currently, there are various approaches to incorporate temperature dependence, which is especially important in coupled neutronic-thermal hydraulic simulations. In each approach, there is an inherent tradeoff between memory consumption and accuracy. Some techniques require tens to hundreds of MBs or more, while others fail to reproduce the underlying data to within 10% error over the considered input domain, despite having a reduced storage burden. This work aims to address both sides of the tradeoff simultaneously by implementing a novel deep learning (DL) approach to TSL representation. The neural thermal scattering (NeTS) concept, which is amenable to an arbitrary number of dependencies, is demonstrated via the inclusion of temperature dependence into a highly compact, highly accurate functional form of the multi- variate TSL (i.e., S(α, β, T)) for hydrogen in light water. Resulting storage requirements are on the order of 100 kB, and median and maximum percent deviations are on the order of 0.1% and 1%, respectively. These measures represent a step improvement over previous techniques. Notably, the developed neural network and feature methodology build on those employed in prior work on beryllium oxide. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

3D Play Fairway Analysis for Examining of Superhot Drilling Production Scenarios: Preprint

The DEEPEN (DE-risking Exploration for geothermal Plays in magmatic ENvironments) project was a multi-laboratory, international effort to reduce uncertainty and improve resource characterization in superhot geothermal systems. Building on this foundation, this work advances open-source tools designed to lower the exploration risk and cost of superhot geothermal projects while promoting transparency, reproducibility, and efficiency in exploration workflows. These tools are being tested at two key sites: (1) the Nesjavellir Geothermal Area in Iceland, where the Icelandic Deep Drilling Project (IDDP) will drill its third well, and (2) Newberry Volcano in Oregon, USA, where Mazama Energy will pilot the first superhot enhanced geothermal system (EGS). A major outcome is the creation of a modular, open-source Python framework for play fairway analysis (PFA) in 2D and 3D, called geoPFA. The PFA workflow has been expanded to produce pseudo conceptual models, and will soon be refined to assess reservoir components through integration with the thermo-hydraulic-mechanical-chemical (THMC) simulator TReactMech, to enable iterative coupling between PFA and THMC models, improving characterization of superhot systems. All three of the Icelandic Deep Drilling Project's production scenarios were analyzed via this framework: (1) a superhot deep injection well paired with conventional production wells at Nesjavellir, (2) a superhot deep production well at Nesjavellir, and (3) superhot enhanced geothermal system at Newberry Volcano. This analysis provides useful insights around conceptual modeling of these production scenarios, helping to inform decisions around which scenario is best suited for which types of environments.

15 GEOTHERMAL ENERGY↗