Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMATOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

On the analysis of signal peaks in pulse-height spectra

The estimation of the signal location and intensity of a peak in a pulse height spectrum is important for X- ray and γ-ray spectroscopy, charged-particle spectrometry, liquid chromatography, and many other subfields. However, both the ‘‘centroid’’ and ‘‘signal intensity’’ of a peak in a pulse-height spectrum are ill-defined quantities and different methods of analysis will yield different numerical results. Here, we apply three methods of analysis. Method A is based on simple count summation and is likely the technique most frequently applied in practice. The analysis is straightforward and fast, and does not involve any statistical modeling. We find that it provides reliable results only for high signal-to-noise data, but has severe limitations in all other cases. Method B employs a Bayesian model to extract signal counts and centroid from the measured total and background counts. The resulting values are derived from the respective posteriors and, therefore, have a rigorous statistical meaning. The method makes no assumptions about the peak shape. It yields reliable and relatively small centroid uncertainties. However, it provides relatively large signal count uncertainties. Method C makes a strong assumption regarding the peak shape by fitting a Gaussian function to the data. Furthermore, the fit is based again on a Bayesian model. Although Method C requires careful consideration of the Gaussian width (usually given by the detector resolution) used in the fitting, it provides reliable values and relatively small uncertainties both for the signal counts and the centroid.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An interface for the direct coupling of small liquid samples to AMS

We describe the moving wire interface attached to the 1-MV AMS system at LLNL’s Center for Accelerator Mass Spectrometry for the analysis of nonvolatile liquid samples as either discrete drops or from the direct output of biochemical separatory instrumentation, such as high-performance liquid chromatography (HPLC). Discrete samples containing at least a few 10 s of nanograms of carbon and as little as 50 zmol 14 C can be measured with a 3–5% precision in a few minutes. The dynamic range of our system spans approximately 3 orders in magnitude. Sample to sample memory is minimized by the use of fresh targets for each discrete sample or by minimizing the amount of carbon present in a peak generated by an HPLC containing a significant amount of 14 C. As a result, liquid sample AMS provides a new technology to expand our biomedical AMS program by enabling the capability to measure low-level biochemicals in extremely small samples that would otherwise be inaccessible.

14C↗

Creation of a High-Yield AAV Vector Production Platform in Suspension Cells Using a Design-of-Experiment Approach

Recombinant adeno-associated virus (rAAV) vectors are a leading gene delivery platform, but vector manufacturing remains a challenge. New methods are needed to increase rAAV yields and reduce costs. Past efforts to improve rAAV production have focused on optimizing a single variable at a time, but this approach does not account for the interactions of multiple factors that contribute to vector generation. Here, we utilized a design-of-experiment (DOE) methodology to optimize rAAV production in a HEK293T suspension cell system. We simultaneously varied the transgene, packaging, and helper plasmid ratios, the total DNA concentration, and the cell density to systematically evaluate the impact of each variable across 52 conditions. The results revealed a unique set of parameters with a lower concentration of transgene plasmid, a higher concentration of packaging plasmid, and a higher cell density than previously described protocols. Using this DOE-optimized protocol, we achieved unpurified yields approaching 3 × 10 14 viral genomes (VGs)/L of cell culture. Additionally, we incorporated polyethylene glycol (PEG)-based virus precipitation, pH-mediated protein removal, and affinity chromatography to our downstream processing, enabling average purified yields of >1 × 10 14 VGs/L for rAAV-EGFPs across 13 serotypes and capsid variants.

59 BASIC BIOLOGICAL SCIENCES↗

Improved protocol to purify untagged amelogenin – Application to murine amelogenin containing the equivalent P70→T point mutation observed in human amelogenesis imperfecta

Amelogenin is the predominant extracellular protein responsible for converting carbonated hydroxyapatite into dental enamel, the hardest and most heavily mineralized tissue in vertebrates. Despite much effort, the precise mechanism by which amelogenin regulates enamel formation is not fully understood. To assist efforts aimed at understanding the biochemical mechanism of enamel formation, more facile protocols to purify recombinantly expressed amelogenin, ideally without any tag to assist affinity purification, are advantageous. Here we describe an improved method to purify milligram quantities of amelogenin that exploits its high solubility in 2% glacial acetic acid under conditions of low ionic strength. The method involves heating the frozen cell pellet for two 15 min periods at ~70 ºC with two minutes of sonication in between, dialysis twice in 2% acetic acid (1:250 v/v), and reverse phase chromatography. A further improvement in yield is obtained by resuspending the frozen cell pellet in 6 M guanidine hydrochloride in the first step. The acetic acid heating method is illustrated with a murine amelogenin containing the corresponding P70→T point mutation observed in an human amelogenin associated with amelogenesis imperfecta (P71T), while the guanidine hydrochloride heating method is illustrated with wild type murine amelogenin (M180). The self-assembly properties of P71T were probed by NMR chemical shift perturbation studies as a function of protein (0.1 to 1.8 mM) and NaCl (0 to 367 mM) concentration. In conclusion, relative to similar studies with wild type murine amelogenin, P71T self-associates at lower protein or salt concentrations with the interactions initiated near the N-terminus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon dioxide/water foams stabilized with a zwitterionic surfactant at temperatures up to 150 °C in high salinity brine

According to the article, stabilization of CO 2 -in-water (C/W) foams with surfactants at high temperature and high salinity conditions is challenging given limitations in the solubility and thermal stability of surfactants, particularly for surfactants other than anionic ones. Here we show that a single zwitterionic surfactant, cetyl betaine (CH 3 (CH 2 ) 15 N + (CH 3 ) 2 CH 2 COO - ), stabilizes viscous C/W foam (>15 cP) in crushed limestone (76-Darcy) at a temperature up to 150 °C and over a wide range in salinity up to 22% total dissolved solids (TDS) at superficial velocity of 940 ft/day. According to liquid chromatography mass spectrometry (LC/MS), cetyl betaine has high thermal stability with negligible chemical degradation after incubation at 135 °C for 30 days. Interfacial tension (IFT) at the C/W interface was reduced significantly from ~37 mN/m to <5 mN/m with the addition of 0.08 mmol/L of cetyl betaine. Relative to ionic surfactants, the relatively weak electrostatic repulsion between the local charges in the headgroup is shown to produce strong adsorption at the C/W interface (~134 Å2/molecule), resulting in generation of viscous foam (~6 cP) even in pure water without added salt. At a low superficial velocity of 6 ft/day (shear rate 45 s -1 ) in a beadpack, foam was still formed with cetyl betaine. Static adsorption of cetyl betaine on carbonates was on the order of 1 mg/m 2 , and core flood test also proved that cetyl betaine could stabilize viscous C/W foam (>20 cP) within 6 pore volumes of injection at 120 °C. The surfactant stabilized viscous C/W foam at low oil fractions and broke in the presence of large fractions of oil, both of which are desirable in CO 2 mobility control and oil displacement. The ability to form foams at high temperatures and over a wide range in salinity is important for various practical applications including CO 2 enhanced oil recovery, fracturing with energized fluids and CO 2 sequestration.

nuclear (including radiation effects), carbon sequ↗

Shale-fluid interactions during forced lmbibition and flow-back

One way to minimize the need for disposal of flow-back waters produced during the hydraulic fracturing of unconventional reservoirs is, potentially, to recycle these fluids by recovering and re-injecting them during hydraulic fracturing of nearby new wells. These flow-back waters contain, however, large concentrations of dissolved salts. During hydraulic fracturing of unconventional reservoirs, a well may undergo extended shut-in periods, following the initial hydraulic-fracture stimulation. The concern here, therefore, is that the salts dissolved in the re-injected flow-back waters may precipitate in the subsurface, thus promoting scale formation; or alternately, because of their high salinity, these same fluids may cause the dissolution of various minerals present in the subsurface. Large divalent cations (e.g., Ca²⁺, Ba²⁺ and Sr²⁺) and anions (e.g., CO3²⁻ and SO4²) may chemically interact with and cause the swelling of clay fractions, thus blocking pores in certain pore size ranges. All these phenomena (i.e., scale formation, clay swelling, minerals dissolution) can influence the petrophysical properties of the formation, including its permeability, porosity, contact angle, etc. One way to potentially overcome some of these technical challenges, is to pre-treat these flow-back waters, prior to re-injection (e.g., via chemical precipitation, followed by membrane filtration) in order to remove unwanted salts. However, such pre-treatment is costly, and the degree of salt removal needed to prevent formation damage is important in determining the economic viability of flow-back water recycle via re-injection. A key focus of this work, therefore, is to study the impact that the injection of flow-back waters, that have undergone varying degrees of pre-treatment and clean-up, will have on the flow-through characteristics of a tight-gas reservoir, particularly of the Marcellus Shale formation. To do so, we have carried-out forced-imbibition experiments with shale samples from various depths in the Marcellus formation, whose properties span high to low ranges of TOC, clay content and matrix permeabilities. We have studied the forced-imbibition characteristics, at an injection pressure of 24,233 kPa (3500 psig), of various flow-back fluids into shale cores saturated with methane at a pore pressure of 17,338 kPa (2500 psig) and a confining stress of 27,680 kPa (4000 psig). Following the forced imbibition experiments, we analyzed the cores for potential changes in permeability and porosity. Quantification of the ion content of the injected and recovered fluids was also performed using Ion Chromatography (IC). The IC analysis of the recovered fluids indicates substantial interactions and geochemical reactions between the invading fluids and the shale cores. The injection of flow-back fluids shows significant impact on the flow-through characteristics, with untreated flow-back fluids, which have the highest cation and anion content, also exhibiting the highest observable reductions in permeability (>90%).

defects, mechanical behavior, carbon sequestration↗

Connecting radiation-driven changes in structural, thermal, and mechanical properties in several medical device polymers

Stemming from security threats and shortages in supply, a recent push has emerged to develop alternatives to radioisotope Cobalt-60 gamma radiation for sterilization of polymeric medical products, including electron beam (e-beam) and X-ray machine-based sources. However, before large-scale implementation, the effects of these non-isotope-based methods must be thoroughly investigated from several perspectives, involving their potential detrimental effects on the structural, thermal, and mechanical properties of polymers in medical devices. This paper investigates such effects in commonly used medical device polymers, including polypropylene homopolymer (PPH), polyolefin elastomer (POE), low-density polyethylene (LDPE), acrylonitrile butadiene styrene (ABS), and chlorobutyl rubber (CIIR). To connect radiation-driven changes in polymer structural and thermal properties and corresponding changes in mechanical properties, several characterization techniques were utilized, including gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). We found that the tensile strength of X-ray irradiated PPH, as well as X-ray, e-beam, and gamma irradiated CIIR decreases due to chain scission, which is corroborated by GPC and DMA. The GPC results of LDPE suggest chain scission, but interestingly without a corresponding decline in tensile strength. By comparison, POE and ABS appear to undergo further crosslinking with increasing irradiation dose, which generally strengthens them. Importantly, in the vast majority of the cases, there were small to no changes in properties upon changing radiation technologies (at a given dose), i.e., no radiation source dependence. However, in a few specific cases, radiation method dependencies did arise, for instance, in terms of the molecular weight of PPH being significantly increased upon X-ray irradiation, while the melting temperature, glass transition temperature, and elongation at break reduced compared to gamma. Overall, this study provides valuable insight into radiation-driven chemical and structural changes in polymers that produce changes in physical and functional properties.

36 MATERIALS SCIENCE↗

Synthesis, characterization (molecular–morphological) and theoretical morphology predictions of linear triblock terpolymers containing poly(cyclohexadiene)

The synthesis via anionic polymerization of six linear triblock terpolymers with various sequences of blocks such as PS (polystyrene), PB [poly(butadiene)], PI [(poly(isoprene)] and PCHD [poly(1,3-cyclohexadiene)] is reported. The synthesis of the terpolymers was carried out by the use of anionic polymerization with high-vacuum techniques and sequential monomer addition. Molecular characterization of the samples was performed via size exclusion chromatography (SEC) and membrane osmometry (MO) to measure the polydispersity indices and the number-average molecular weights, respectively. Proton nuclear magnetic resonance spectroscopy (1H NMR) was employed to verify the microstructure type for the polydienes, as well as, to calculate the molar composition. Structural characterization of the terpolymers was performed via transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS), and several morphologies were observed including one which has not been reported previously. Real-space self-consistent field theory (SCFT) without a priori knowledge about the symmetry of the periodic structures was used to elucidate the thermodynamics of the synthesized triblock copolymers.

Polymer Science↗

Melt-spinnable polyacrylonitrile copolymer precursors for carbon fibers

This paper describes the feasibility of achieving melt-processable polyacrylonitrile copolymer precursors for producing high strength carbon fibers. High molecular weight poly(acrylonitrile-ran-methyl acrylate) (PAN-MA) copolymers with high acrylonitrile content were mixed were various binary melting point modifiers with one component being water to produce systems that formed stable melts at temperatures below the temperature corresponding to the onset of PAN-MA crosslinking. The structure of the copolymer was 96.5 ± 0.13 mol% AN and 4.40 ± 0.13 mol % MA by 1H NMR with an Mw = 238 kDa and polydispersity of 1.9 determined by size exclusion chromatography. A reduction in the Tm of the copolymer of 200 °C was established for one of the copolymer/melting point modifier systems, which corresponds to the greatest reduction in a PAN-based copolymer melting temperature yet reported. From isothermal DSC and pressurized capillary rheometry experiments it was found that the stability of the resulting melts shows a strong temperature dependence, but does not show a strong dependence on shear-rate. Copolymer mixtures consisting of H2O and acetonitrile or adiponitrile were found to be suitable for melt-extrusion at 170 °C with viscosities ranging from 1800 to 2000 Pa*s and stabilities of the melts ≥1 h.

36 MATERIALS SCIENCE↗

Effect of Microstructure on Chain Flexibility and Glass Transition Temperature of Polybenzofulvene

Polybenzofulvene (PBF) is a polydiene with a very high glass transition temperature (T g ), which makes it a potential candidate for use as the hard block for high-temperature thermoplastic elastomer applications. The T g s of polydienes are known to be related to chain flexibility. However, no studies have been reported that correlate the chain flexibility to the microstructure of PBF. Herein, we present a study of solution properties of linear PBFs with narrow molecular weight dispersity and having 1,2-addition ranging from 23% to 99%. The materials were prepared by living anionic polymerization under different conditions. Specifically, the chain flexibility as defined by the Flory's characteristic ratio, , and dependence of chain flexibility on microstructure by combined measurements of intrinsic viscosity and molecular weight using triple-detector size exclusion chromatography (SEC) is studied. The persistence lengths (l p ) and chain diameters (d B ) were also estimated using the touched-bead wormlike chain model. To the best of our knowledge, the characteristic ratio of PBF is found to be the highest of all polydienes that have been reported so far.

36 MATERIALS SCIENCE↗

Elucidating reactivity regimes in cyclopentane oxidation: Jet stirred reactor experiments, computational chemistry, and kinetic modeling

This study is concerned with the identification and quantification of species generated during the combustion of cyclopentane in a jet stirred reactor (JSR). Experiments were carried out for temperatures between 740 and 1250 K, equivalence ratios from 0.5 to 3.0, and at an operating pressure of 10 atm. The fuel concentration was kept at 0.1% and the residence time of the fuel/O 2 /N 2 mixture was maintained at 0.7 s. The reactant, product, and intermediate species concentration profiles were measured using gas chromatography and Fourier transform infrared spectroscopy. The concentration profiles of cyclopentane indicate inhibition of reactivity between 850-1000 K for φ=2.0 and φ=3.0. This behavior is interesting, as it has not been observed previously for other fuel molecules, cyclic or non-cyclic. A kinetic model including both low- and high-temperature reaction pathways was developed and used to simulate the JSR experiments. The pressure-dependent rate coefficients of all relevant reactions lying on the PES of cyclopentyl + O 2 , as well as the C-C and C-H scission reactions of the cyclopentyl radical were calculated at the UCCSD(T)-F12b/cc-pVTZ-F12//M06-2X/6-311++G(d,p) level of theory. The simulations reproduced the unique reactivity trend of cyclopentane and the measured concentration profiles of intermediate and product species. Furthermore, sensitivity and reaction path analyses indicate that this reactivity trend may be attributed to differences in the reactivity of allyl radical at different conditions, and it is highly sensitive to the C-C/C-H scission branching ratio of the cyclopentyl radical decomposition.

30 DIRECT ENERGY CONVERSION↗

Experimental and computational investigations of ethane and ethylene kinetics with copper oxide particles for Chemical Looping Combustion

In this work, reaction pathways for the oxidation of methane, ethane, and ethylene with CuO was obtained by ReaxFF Molecular Dynamics (MD) simulations between temperatures of 1000 K and 2000 K. Experiments in a fixed-bed flow reactor were preformed with methane, ethane, and ethylene at temperatures ranging from 500 K to 1000 K with time-dependent species measurements from an Electron-Ionization Molecular Beam Mass Spectrometer (MBMS), and species validation with Gas Chromatography (GC) for detection of complete and intermediate combustion products. The MBMS and GC allow for the detection of oxygenated species and larger species produced from radical reformation. The simulation and experiment agree on the production of such species as CH 3 CHO, CH 2 O, CO, and H 2 O, which allow for the creation of simple C1 and C2 reaction pathways, which can be used in kinetic models of C2 species and larger fuels such as biofuels, which inherently depend on C1 and C2 kinetics and reaction pathway. The simulation and experiment disagree on the formation of C 2 H 2 , CH 3 OH, and CO 2 with large amounts of C 2 H 2 being measured in the ethylene oxidation simulations and CH 3 OH being formed in methane oxidation simulations, while neither species were experimentally found. In the case of CO 2 large amounts of CO 2 are rapidly produced in experiments with C2 fuels at 800 K, while little-to-no CO 2 was observed in simulations. This is believed to be resulting from the extremely short timescale of the simulations, preventing total oxidation of the fuel. Here, the differences in products produced between simulation and experiment allow for the potential to modify the ReaxFF potential functions to more accurately model the experimental products of Cu–H–O–C reaction kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Styrene Thermal Decomposition and Its Reaction with Acetylene under Shock Tube Pyrolysis Conditions: an Experimental and Kinetic Modeling Study

Styrene is an important compound for polymer production and a key intermediate in gas-phase kinetics of polycyclic aromatic hydrocarbons (PAHs). For the first time, the pyrolysis of styrene with and without the presence of acetylene is investigated in a single-pulse shock tube coupled to gas chromatography and mass spectrometry. For each reaction system, quantitative speciation profiles are probed within the temperature range of 1100-1730 K, nominal pressure of 20 bar, and reaction duration of similar to 4 ms. A kinetic model is built to simulate the results. The model explains how styrene is consumed under high-pressure pyrolytic conditions, how the secondary chemistry of intermediate products affect subsequent PAH formation, and how acetylene addition alters the reaction pathways. Throughout the temperature range, styrene breakdown is dominated by the bimolecular interaction between styrene and hydrogen atom, which produces benzene+vinyl or phenyl and ethylene through the stabilization of 2-phenylethyl and its subsequent dissociation. As a result, large amounts of phenyl accumulate, which react with styrene to form C14H12 species while simultaneously releasing H atoms through addition/elimination reactions. The reactivity of fuel consumption is preserved by the regeneration of H atoms as chain carriers. Several C14H10 compounds are formed as a result of the following breakdown of the C14H12 isomers, particularly stilbene, 1,1-diphenyl ethylene, and 9-methyl-9H-fluorene. The presence of acetylene as a co-reactant with styrene allows the Hydrogen-Abstraction-Acetylene-Addition (HACA) pathway to proceed from phenyl radical to enhance the production of phenylacetylene at very low temperatures and acenaphthylene. This hinders the formation of C14H12 isomers, exclusive products from pure styrene dissociation by competing with the styrene+phenyl routes.

Kinetic Modeling↗

Probing activated radioprotection of simple hydrophilic phosphonic acids in aqueous solution

Prior exploration into the radiation chemistry of the ligand octylphenyl-N,N-diisobutylcarbamoylmethyl phosphine oxide (CMPO) and its analogues demonstrated their ability to undergo activated radioprotection in an organic solvent – a feature most advantageous for spent nuclear fuel reprocessing scenarios. This phenomenon was dependent on these organophosphorus compounds forming a sacrificial complex involving extracted nitric acid and the presence of an adjacent phenylphosphine oxide motif in the molecule. However, the hydrophobic nature of these compounds prevented elucidation of which components were essential for activated radioprotection; for example, does the phenylphosphine oxide motif only require protonation, or simply the presence of complexed nitrate anion(s), or both? To begin to address these questions, we report on the effect of dissolved nitrate on the radiation chemistry of a series of simple hydrophilic phosphonic acids (methyl, ethyl, phenyl, and benzyl) in aqueous solution. An extensive suite of gamma irradiations supported by high performance liquid chromatography and nuclear magnetic resonance techniques was used to demonstrate that all four compounds were unable to undergo activated radioprotection. While some nitrate protection was observed, this was attributed to changes in the available suite of radiolysis products, and not to the formation of nitrate-phosphonic acid sacrificial complexes. The absence of activated radioprotection and evidence for the formation of a [PhPA•NO 3 -] complex further supports the necessity of complex formation to activate the radioprotection mechanism.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Aging mechanisms of filled cross-linked polyethylene (XLPE) cable insulation material exposed to simultaneous thermal and gamma radiation

Thermal and simultaneous thermal and gamma radiation aging experiments were conducted on an industry grade cross-linked polyethylene (XLPE) cable insulation material, which is a composite material with XLPE as polymer matrix and various additives and fillers. Reverse engineering was conducted to identify and quantify the material composition given that this information was not revealed by the cable manufacture. Samples were then aged at temperatures of 60, 90, and 115 °C, exposed to gamma radiation for total doses of 0 to 324 kGy, and at dose rates of 0 to 540 Gy/h. Aging mechanisms were studied using various materials characterization techniques including pyrolysis gas chromatography mass spectrometry (Py-GCMS), differential scanning calorimetry (DSC), nuclear magnetic resonance spectroscopy (NMR), and gel-fraction tests. Results show that the flame-retardant components were decomposed into smaller molecules when the material was exposed to gamma radiation, while no changes were observed when the samples were aged thermally without gamma radiation. With exposure to gamma radiation, the crystalline phase of the XLPE were damaged by gamma radiation introducing defects in the crystals, resulting in smaller and less perfect crystals. The dominance of chain scission or chain reformation process largely depends on the chain mobility, which is decided by the aging temperature. Chain scission was seen to dominate when the material was exposed to gamma radiation at 60 °C. Chain cross-linking slightly dominated when the material was exposed to gamma radiation at 90 °C and became more dominant with exposure to gamma radiation at 115 °C. No significant change to the XLPE polymer matrix was observed when the samples were exposed to thermal aging without gamma radiation. Finally, antioxidant is more effective in protecting the XLPE polymer matrix under thermal aging, but less effective with sample exposure to gamma radiation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

New methods for trace analysis of gamma-irradiated pentaerythritol tetranitrate

High explosives (HEs) are used in a diverse range of applications in which they could be exposed to various radiation levels that may cause potential chemical changes. This study further evaluated pentaerythritol tetranitrate (PETN) that was previously aged with a low-level 2 kGy dose of gamma irradiation in order to understand chemical changes caused by irradiation. Both unirradiated PETN and gamma-irradiated PETN were analyzed using ultra high-pressure liquid chromatography coupled to quadrupole time of flight mass spectrometry (UHPLC-QTOF). The resulting data were processed in a non-targeted manner using Fisher's ratio analysis and multivariate curve resolution-alternating least squares (MCR-ALS) to aid in discovery and identification of the chemical changes brought about by irradiation without a priori knowledge. The application of using UHPLC-QTOF in combination with chemometric techniques for the analysis of irradiated samples has not previously been performed. Here, in this work, we show how to use this method to provide chemical information that would otherwise not be discernible, such as the discovery of degradation of the various homologues of PETN. Major differences identified with radiolytic aging of the PETN sample included decomposition products that resulted from the degradation of the trigger linkage – the O–NO 2 bonds – resulting in the formation of alcohol and aldehyde groups. Similar degradation was also observed in the PETN homologues as well as interconversion from one homologue to another.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗