SEARCH · Engineering Papers
Results for “BiN”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flowthrough Pretreatment of Softwood under Water-only and Alkali Conditions
Flowthrough pretreatment provides valuable insight in the fundamentals of deconstruction of plant biomass. In this study, the potential softwood degradation pathways under water-only and alkali conditions were determined by elucidating the deconstructed biomass-derived products at 0-270 °C for 2-10 min at a flow rate of 25 mL/min with water-only or alkaline at initial pH of 8, 9, 11, and 12, respectively. Results indicated that the initial pH value was a convenient indicator along with the severity parameter to control biomass degradation through the non-oxidative (pH<9) and oxidative (pH=9) pathways. Up to 100 % of hemi-sugars, 90 % of cellulose, and 70 % of lignin were derived from softwood under non-oxidative conditions at severity parameter LogR0 around 5.5, respectively. On the contrary, at pH 12, the oxidative degradation resulted in pretreated hydrolysate rich in monomeric and oligomeric phenolic products as well as glycolic acid, acetic acid, and formic acid from carbohydrates. The two dimensional 1H-13C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) analysis revealed that non-oxidative degradation at initial pH values lower than 9 mainly cleaved ß-O-4, all of the ß-ß, and ß-5/a-O-4 linkages, whereas substantial aromatic ring structures with limited ß-O-4 structures remaining at pH 12 through oxidative degradation.
Uranium recovery from seawater using amidoxime-based braided polymers synthesized from acrylic fibers
Global demand for nuclear energy is expected to rise in the coming decades. To meet these growing needs, new uranium resources must be explored. One of the potential alternatives to traditional uranium mining is oceanic uranium. The capture and recovery of uranium from the ocean has been under investigation for some time, with many recent studies focused on amidoxime based adsorbents. These adsorbents while able to achieve high uranium recovery capacities are, nevertheless, expensive to produce and adsorb a significant amount of hard to remove vanadium. The purpose of this study is to evaluate the adsorption performance of amidoxime based polymer braids synthesized from acrylic fibers which are designed to significantly cut polymer synthesis and conditioning costs. Adsorption experiments were performed in a recirculating raceway flume system at environmental conditions, approximately 10.8 oC, with 40-micron prefiltered seawater over 28 days for small and large sized LCW polymer braids. For both braid sizes, the adsorption of vanadium was far lower on the LCW materials than on Oak Ridge National Laboratory’s amidoxime based AF1 and AI8 small braids, with the LCW small braids outperforming both materials with respect to uranium adsorption under similar conditions. Adsorption modeling was used to simulate the performance at higher temperatures based on 20oC experiments previously performed with similar materials. Simulation results indicated that the small LCW braids would have a less significant advantage with respect to uranium adsorption over both AF1 and AI8 at 20oC and adsorb slightly less uranium than AF1 at 31oC. Vanadium adsorption by LCW small braids was less than one third of vanadium adsorption by either AF1 or AI8 for all temperatures. This behavior indicates that the LCW materials are able to achieve comparable uranium adsorption to other amidoxime adsorbents previously developed, while being cheaper to produce and adsorbing significantly less vanadium.
Dual Functional Ni3S2@Ni Core-Shell Nanoparticles Decorating Nanoporous Carbon as Cathode Scaffolds for Lithium-Sulfur Battery with Lean Electrolytes
Lithium-sulfur batteries are very promising for next-generation energy storage. However, most studies use flooded electrolytes to achieve a high specific capacity at the expense of lowering the specific energy. Understanding lithium-sulfur battery performance with lean electrolytes is highly desirable. Herein, a modified Pechini method is developed to synthesize a nanoporous carbon host decorated with Ni3S2@Ni particles. Such a cathode delivers enhanced specific capacities with extended cycling life in lean electrolytes, due to the dual functions of the Ni3S2 shell, which can both facilitate reaction kinetics and promote electrolyte wetting. This work highlights a strategy to rationally design cathodes for highenergy lithium-sulfur batteries.
Water Promotion (or Inhibition) of Condensation Reactions Depends on Exposed Cerium Oxide Catalyst Facets
Nanoparticles with well-defined facets enable quantitative correlations between surface features and catalytic activity. In this work, we explore the role of geometric and acid–base properties in the mechanism of aldol condensation catalyzed by ceria nanoshapes. In the crucial C–C coupling step, the two carbonyl adsorbates are bound to two adjacent cations. On the CeO 2 (110) plane, all atoms lie on the same layer, favoring the interaction between adsorbates and facilitating the bimolecular C–C coupling. Thus, the initial unimolecular deprotonation is rate-limiting. In contrast, the (100) and (111) planes have an open structure with O on the top layer and Ce on the layer below. The former O layer interferes between adsorbates linked to Ce sites, making the C–C coupling rate-limiting. Water helps in overcoming this spatial hindrance by remote bond polarization via H-bonds. Therefore, water promotion is only observed on those planes for which the bimolecular step is rate-limiting.
Kinetic Modeling of Secondary Organic Aerosol in a Weather-Chemistry Model: Parameterizations, Processes, and Predictions for GOAmazon
Secondary organic aerosol (SOA) forms and evolves in the atmosphere through many pathways and processes, over diverse spatial and time scales. Hence, there is a need to represent these widely-varying kinetic processes in large-scale atmospheric models to allow for accurate predictions of the abundance, properties, and impacts of SOA. In this work, we integrated a kinetic, process-level model (simpleSOM-MOSAIC) into a weather-chemistry model (WRF-Chem) to simulate the oxidation chemistry and microphysics of atmospheric SOA. simpleSOM-MOSAIC simulates multigenerational gas-phase chemistry, autoxidation reactions, heterogeneous oxidation, oligomerization, and phase-state-influenced gas/particle partitioning of SOA. As a case study, the integrated WRF-Chem-simpleSOM-MOSAIC (WC-SSM) model was used to simulate the photochemical evolution downwind of a large city (Manaus, Brazil) in the Amazon and, in turn, study the anthropogenic and biogenic interactions in an otherwise pristine environment. Consistent with previous work, we found that OA was enhanced by up to a factor of four in the urban plume due to elevated hydroxyl radical (OH) concentrations, relative to the background, and that this OA was dominated by SOA from biogenic precursors (80%). Further, in addition to accurately simulating the OA enhancement in the urban plume, the model reproduced the magnitude of the OA oxygen-to-carbon (O:C) ratio and broadly tracked the evolution of the aerosol size distribution. Our work highlights the importance of including an integrated, kinetic representation of SOA processes in an atmospheric model
Parameterizing Perennial Bioenergy Crops in Version 5 of the Community Land Model Based on Site‐Level Observations in the Central Midwestern United States
Abstract With projected expansion of biofuel production at a global scale, there is a pressing need to develop adequate representation of bioenergy crops in land surface models to help effectively quantify the biogeophysical and biogeochemical effects of its associated land use changes. This study implements two new perennial bioenergy crops, Miscanthus and switchgrass, into the Community Land Model Version 5 based on site‐level observations from the midwestern United States by modifying parameters associated with photosynthesis, phenology, allocation, decomposition, and carbon cost of nitrogen uptake and integrating concomitantly land management practices. Sensitivity analyses indicate that carbon and energy fluxes of the perennial crops are most sensitive to photosynthesis and phenology parameters. Validation of simulated fluxes against site‐level measurements demonstrates that the model is capable of capturing the overall patterns of energy and carbon fluxes, as well as physiological transitions from leaf emergence to senescence. Compared to annual crops, perennial crops feature longer growing season, greater leaf areas, and higher productivity, leading to increased transpiration, lower annual runoff, and larger carbon uptake. The model simulations suggest that with higher CO 2 assimilation rates and lower demands for nutrients and water, high‐yielding perennial crops are promising alternatives of bioenergy feedstocks compared to traditional annual crops not only for mitigating climate change but also for environmental conservation purposes by reducing fertilizer application and therefore alleviating surface‐ and ground‐water contaminations. Although the local‐scale simulations shed light on potential benefits of using perennial grasses as bioenergy feedstocks, quantifying consequences of their plantations at larger scales warrants additional investigation.
A New Approach for Simultaneous Estimation of Entrainment and Detrainment Rates in Non- Precipitating Shallow Cumulus
A new approach is developed for estimating entrainment and detrainment rates in cumulus clouds based on aircraft observations. Equations relating entrainment and detrainment rates to gross entrainment and detrainment are derived. This approach is applied to the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems field campaign, supported by the U.S. Department of Energy's Atmospheric Radiation Measurement program. The results show that both entrainment and detrainment rates decrease with increasing height. Sensitivity tests with different detrained air assumptions yield similar results. The entrainment and detrainment rates can reproduce the cloud thermodynamic variables. Partial correlation analysis indicates that entrainment rate is positively correlated with environmental relative humidity (RH), and detrainment rate is negatively correlated with environmental RH and positively correlated with entrainment rate. This new approach can be applied to other cloud observations to obtain a data set of entrainment and detrainment rates in cumulus clouds.
High‐Pressure Phase Stability and Thermoelastic Properties of Iron Carbonitrides and Nitrogen in the Deep Earth
Abstract Iron‐dominant metallic phases are likely the primary hosts for nitrogen in the reduced deep Earth, hence the storage of nitrogen in the lower mantle and the core is governed by the behavior of the Fe‐N‐C system at high temperatures and pressures. In this study, phase transitions and thermoelastic properties of iron carbonitrides were investigated at high pressure‐temperature conditions by diamond anvil cell experiments and first‐principles calculations. Experimental data revealed no phase transition in ε ‐type Fe 4 (N 0.6 C 0.4 ) or Fe 7 (N 0.75 C 0.25 ) 3 up to 60 GPa at room temperature. At high temperature, Fe 7 (N 0.75 C 0.25 ) 3 transforms into the Fe 3 C‐type phase at ∼27 GPa, and then into the Fe 7 C 3 ‐type phase at ∼45 GPa, which is also corroborated by our theoretical calculations. We found that the phase stability of iron carbonitrides mainly depends on the N/C ratio, and the elastic properties of iron carbonitrides are dominantly affected by the Fe/(N+C) ratio. Iron carbonitrides with diverse structures may be the main host for nitrogen in the deep mantle. Some iron carbonitride inclusions in lower mantle diamonds could be the residue of the primordial mantle or originate from subducted nitrogen‐bearing materials, rather than iron‐enriched phases of the outer core. In addition, our experiments confirmed the existence of Fe 7 C 3 ‐type Fe 7 C 3 ‐Fe 7 N 3 solid solutions above 40 GPa. Fe 7 C 3 ‐type Fe 7 (C, N) 3 has comparable density and thermoelastic properties to its isostructural endmembers and may be a promising candidate constituent of the Earth's inner core.
Water‐Induced Diamond Formation at Earth's Core‐Mantle Boundary
Abstract The carbon and water cycles in the Earth's interior are linked to key planetary processes, such as mantle melting, degassing, chemical differentiation, and advection. However, the role of water in the carbon exchange between the mantle and core is not well known. Here, we show experimental results of a reaction between Fe 3 C and H 2 O at pressures and temperatures of the deep mantle and core‐mantle boundary (CMB). The reaction produces diamond, FeO, and FeH x , suggesting that water can liberate carbon from the core in the form of diamond (“core carbon extraction”) while the core gains hydrogen, if subducted water reaches to the CMB. Therefore, Earth's deep water and carbon cycles can be linked. The extracted core carbon can explain a significant amount of the present‐day mantle carbon. Also, if diamond can be collected by mantle flow in the region, it can result in unusually high seismic‐velocity structures.
Anthropogenic extremely low volatility organics (ELVOCs) Govern the Growth of Molecular Clusters over the Southern Great Plains during the Springtime
New particle formation (NPF) and growth govern cloud condensation nuclei (CCN) concentrations in many regions. The mechanisms governing the nucleation of molecular clusters vary substantially in different regions of the atmosphere. Additionally, the growth of these clusters from ~2 to 20 nm sizes is often governed by the availability of extremely low volatility organic vapours (ELVOCs). While the pathways to ELVOC formation from the oxidation of biogenic monoterpenes with ozone is better understood, the chemical and mechanistic pathways for ELVOC formation from oxidation of anthropogenic organics are not well understood. We integrate measurements and three-dimensional regional model simulations with the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to understand the processes governing new particle formation and growth and secondary organic aerosol (SOA) formation during the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) field campaign at the Southern Great Plains (SGP) observatory in Oklahoma, and contrast it with a site within the Bankhead National Forest (BNF), Alabama in Southeast USA, where 5-year long measurements will begin in 2024. Simulations show that nucleation rates are at least an order of magnitude higher at SGP compared to BNF during the springtime days (April 28 and May 14, 2016), largely due to lower H2SO4 concentrations at BNF, which are needed for nucleation. In addition, the larger CS at BNF (compared to SGP) increase the loss of molecular clusters by coagulation to pre-existing particles. Among the 8 different nucleation mechanisms in WRF-Chem, we find that the amine+H2SO4 nucleation mechanism dominates at the SGP site, while the pure organic ion induced nucleation mechanism dominates over BNF. Through various WRF-Chem sensitivity simulations, we find that anthropogenic ELVOCs are critical for explaining the growth of newly formed particles and the resulting number size distribution observed near the surface at the SGP site during the daytime. In addition, we show that treating organic particles as semisolid, with strong diffusion-limited uptake of organic vapours, brings model predictions into closer agreement with the observed evolution of particle size distribution. Simulations also predict that anthropogenic SOA, formed by the oxidation of aromatic volatile organic compounds (VOCs), is the dominant organic aerosol component at SGP, while biogenic SOA dominates particle composition at the BNF site in Southeast USA on these days.
Brain ageing in schizophrenia: evidence from 26 international cohorts via the ENIGMA Schizophrenia consortium
Schizophrenia (SZ) is associated with an increased risk of life-long cognitive impairments, age-related chronic disease, and premature mortality. We investigated evidence for advanced brain ageing in adult SZ patients, and whether this was associated with clinical characteristics in a prospective meta-analytic study conducted by the ENIGMA Schizophrenia Working Group. The study included data from 26 cohorts worldwide, with a total of 2803 SZ patients (mean age 34.2 years; range 18–72 years; 67% male) and 2598 healthy controls (mean age 33.8 years, range 18–73 years, 55% male). Brain-predicted age was individually estimated using a model trained on independent data based on 68 measures of cortical thickness and surface area, 7 subcortical volumes, lateral ventricular volumes and total intracranial volume, all derived from T1-weighted brain magnetic resonance imaging (MRI) scans. Deviations from a healthy brain ageing trajectory were assessed by the difference between brain-predicted age and chronological age (brain-predicted age difference [brain-PAD]). On average, SZ patients showed a higher brain-PAD of +3.55 years (95% CI: 2.91, 4.19; I 2 = 57.53%) compared to controls, after adjusting for age, sex and site (Cohen’s d = 0.48). Among SZ patients, brain-PAD was not associated with specific clinical characteristics (age of onset, duration of illness, symptom severity, or antipsychotic use and dose). This large-scale collaborative study suggests advanced structural brain ageing in SZ. Longitudinal studies of SZ and a range of mental and somatic health outcomes will help to further evaluate the clinical implications of increased brain-PAD and its ability to be influenced by interventions.
Efficient electrically powered CO2-to-ethanol via suppression of deoxygenation
Explore the source record for details and available documents.
A thermotropic liquid crystal enables efficient and stable perovskite solar modules
Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate during perovskite crystallization and aggregate at interfaces, contributing to defects and to spatial inhomogeneity. Here we develop design criteria for additives to prevent their evaporative precipitation and enable uniform passivation of defects. We explored liquid crystals with melting point below the perovskite processing temperature, functionalization for defect passivation and hydrophobicity to improve device stability. We find that thermotropic liquid crystals such as 3,4,5-trifluoro-4'-(trans-4-propylcyclohexyl)biphenyl enable large-area perovskite films that are uniform, low in defects and stable against environmental stress factors. We demonstrate modules with a certified stabilized efficiency of 21.1% at an aperture area of 31 cm 2 and enhanced stability under damp-heat conditions (ISOS-D-3, 85% relative humidity, 85 °C) with T 86 (the duration for the efficiency to decay to 86% of the initial value) of 1,200 h, and reverse bias with (ISOS-V-1, negative maximum-power-point voltage) and without bypass diodes.
The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides
Abstract not provided
Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes
Electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) are limited by a lack of material strategies that can both suppress the formation of defects and enhance the charge carrier confinement. Here we report a one-dopant alloying strategy that generates smaller, monodisperse colloidal particles (confining electrons and holes, and boosting radiative recombination) with fewer surface defects (reducing non-radiative recombination). Doping of guanidinium into formamidinium lead bromide PNCs yields limited bulk solubility while creating an entropy-stabilized phase in the PNCs and leading to smaller PNCs with more carrier confinement. Further, the extra guanidinium segregates to the surface and stabilizes the undercoordinated sites. Furthermore, a surface-stabilizing 1,3,5-tris(bromomethyl)-2,4,6-triethylbenzene was applied as a bromide vacancy healing agent. The result is highly efficient PNC-based light-emitting diodes that have current efficiency of 108 cd A –1 (external quantum efficiency of 23.4%), which rises to 205 cd A –1 (external quantum efficiency of 45.5%) with a hemispherical lens.
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width (n). Recently, 2D/3D heterostructures containing n = 1 and 2 RDPs have produced PSCs with > 25% power conversion efficiency (PCE). Unfortunately, this method does not translate to inverted PSCs due to electron blocking at the 2D/3D interface. Here we report a method to increase the layer width of RDPs in 2D/3D heterostructures in order to address this problem. We discover that bulkier organics form 2D heterostructures more slowly, resulting in wider RDPs; and that small modifications to ligand design induce preferential growth of n ≥ 3 RDPs. Levering these insights, we developed efficient inverted PSCs (certified 23.91% quasi-steady state efficiency). Furthermore, unencapsulated devices operate at room temperature and ~50% relative humidity for over 1000 hrs without loss of PCE; and, when subjected to ISOS-L3 accelerated aging encapsulated devices retain 92% of PCE after 500 hrs.
The National Microbiome Data Collaborative: Enabling Microbiome Science
To harness the potential of microbiome science across the broad range of relevant disciplines, new approaches to data infrastructure and transdisciplinary collaboration are necessary. The National Microbiome Data Collaborative (NMDC) is a new initiative to support microbiome data exploration and discovery through a collaborative integrative data science ecosystem.