Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BOUNDARY CONDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Enhanced Mixing in a Rectangular Duct

An experimental investigation of the mixing of non-reacting opposed rows of jets injected normal to a confined rectangular crossflow has been conducted. Planar Mie-scattering was used to measure the time-average concentration distribution of the jet fluid in planes perpendicular to the duct axis. Particular emphasis was placed on the study of closely spaced orifice configurations applicable to the mixing zone of an RQL combustor. Baseline studies were performed of mixing under "ideal" conditions, i.e., plenum fed jets injecting into a crossflow uniform in velocity and turbulence intensity. In addition, more practical ("non-ideal") issues encountered during hardware design were also studied. As in other studies, mixing effectiveness, determined using a spatial unmixedness parameter based on the variance of mean jet concentration distributions, was found to be optimum when the spacing-to-duct-height ratio was inversely proportional to the square root of the jet-to-mainstream momentum-flux ratio. This relationship is suitable for design under ideal flow conditions. Inlet flow boundary conditions of the jet and approach flow (mainstream) were found to strongly influence mixing performance, but no attempt was made to determine optimum performance under non-ideal conditions. The tests performed do offer some guidance as to expected mixing behavior for several common variables likely to be imposed by hardware constraints. Additionally, in this study it was found that for rows of orifices with opposite centerlines inline, mixing was similar for blockages up to 89 percent (previous crossflow mixing studies concerned with dilution zone configurations, blockages were typically less than 50 percent). Lower levels of unmixedness were obtained as a function of downstream location when axial injection length was minimized. Mixing may be enhanced if orifice centerlines of opposed rows are staggered, but blockage must be =50 percent in this configuration. Round hole and "square" orifice shapes had similar performance. Other variations in orifice shape did not substantially augment overall mixing performance. Furthermore an isothermal mixing data set was generated and used by CFDRC as input to a NO(x) inference code.

Liscinsky, D. S.↗

A Computational Model for Rotor-Fuselage Interactional Aerodynamics

A novel unsteady rotor-fuselage interactional aerodynamics model has been developed. This model loosely couples a Generalized Dynamic Wake Theory (GDWT) to a thin-layer Navier-Stokes solution procedure. This coupling is achieved using an unsteady pressure jump boundary condition in the Navier-Stokes model. The new unsteady pressure jump boundary condition models each rotor blade as a moving pressure jump which travels around the rotor azimuth and is applied between two adjacent planes in a cylindrical, non-rotating grid. Comparisons are made between measured and predicted time-averaged and time-accurate rotor inflow ratios. Additional comparisons are made between measured and predicted unsteady surface pressures on the top centerline and sides of the fuselage.

D. Douglas Boyd, Jr.↗

The Land Surface Data Toolkit (LDT v7.2) - A Data Fusion Environment for Land Data Assimilation Systems

The effective applications of land surface models (LSMs) and hydrologic models pose a varied set of data input and processing needs, ranging from ensuring consistency checks to more derived data processing and analytics. This article describes the development of the Land surface Data Toolkit (LDT), which is an integrated framework designed specifically for processing input data to execute LSMs and hydrological models. LDT not only serves as a preprocessor to the NASA Land Information System (LIS), which is an integrated framework designed for multi-model LSM simulations and data assimilation (DA) integrations, but also as a land-surface-based observation and DA input processor. It offers a variety of user options and inputs to processing datasets for use within LIS and stand-alone models. The LDT design facilitates the use of common data formats and conventions. LDT is also capable of processing LSM initial conditions and meteorological boundary conditions and ensuring data quality for inputs to LSMs and DA routines. The machine learning layer in LDT facilitates the use of modern data science algorithms for developing data-driven predictive models. Through the use of an object-oriented framework design, LDT provides extensible features for the continued development of support for different types of observational datasets and data analytics algorithms to aid land surface modeling and data assimilation.

droughts and floods↗

Test and Analysis Correlation of Standard and Hybrid Standard/Thin-ply Composite Notched Test Specimens

Hybrid composite laminates, a combination of standard-and thin-ply layers, are structurally efficient and can offer opportunities for weight savings over composite laminates composed of only standard-thickness plies. Three hybrid laminates and three standard laminates were tested and analyzed to provide a baseline comparison for not only weight savings and strength benefits of the hybrid stacking sequences, but also to provide fidelity for progressive failure modeling techniques using the two different laminate designs. The standard and hybrid composite specimens were designed to have the same thickness and in-plane stiffness properties, as closely as possible, and were loaded with axial tension and axial compression. Small notched specimens were tested under compression and tension loading, and larger intermediate specimens were tested under tension loading, only. The finite element modeling represented the as-designed panel dimensions as well as the real-life testing conditions through various boundary conditions. The progressive failure modeling and analysis technique described, exhibited very good correlation with the hybrid test specimens, and therefore is appropriate for use in future investigations into more appealing stacking sequences. The progressive failure modeling can also be used to determine the proper usage of thin-ply materials in order to determine the most ideal strength benefits over their standard-ply counterparts.

Alana Zahn↗

A compact solution to computational acoustics

This paper demonstrates that the linearized, dimensional Euler equations for acoustic computation can be accurately solved as a set of decoupled first-order wave equations, and that if ordered properly, this system of simple waves has unambiguous, easily implemented boundary conditions, allowing waves of same group speeds to pass through numerical boundaries or comply with wall conditions. Thus, the task of designing a complex multi-dimensional scheme with approximate far-field boundary conditions reduces to the design of higher order schemes for the one-dimensional simple wave equation. A compact finite-difference scheme and a characteristically exact but numerically n(th) order accurate boundary condition are introduced for solving the first order wave equation. Spanning a three-point two-level stencil, this low-dispersion implicit scheme has a third order spatial accuracy when used on nonuniform meshes, fourth order accurate on uniform meshes, and a temporal accuracy of second order due to the choice of trapezoidal integration for algorithmic simplicity. The robustness and accuracy of the scheme are demonstrated through a series of numerical experiments and comparisons with published results. When tested on the one-dimensional wave equation on a uniform grid, this scheme allows a Gaussian wave packet to pass through any finite domain with low numerical dispersion characteristic of a spatially fourth-order scheme and reflections at numerical boundaries maintained below truncation error. On highly stretched and irregular grids, only mild dispersions are found in the solution while solutions by other methods fail or are severely distorted. Yet, this scheme is no more sophisticated to solve or implement than the Crank-Nicolson scheme. This scheme has been tested on four categories of the ICASE/LaRC benchmark problems, which include propagation of acoustic and convective waves in Cartesian and cylindrical domains, reflection of acoustic wave at stationary/moving boundaries, and sound generation by gust-blade interaction.

Fung, K.-Y.↗

Properties of a warm plasma collisional sheath in an oblique magnetic field

The properties of a warm plasma collisional sheath in an oblique magnetic field and the associated sheath criterion are investigated with a two-fluid model. In the fluid framework, a sheath criterion including effects of the magnetic field and collision is established theoretically for a wide range of ion temperature. With the sheath criterion as the plasma-sheath boundary condition, different plasma parameters including potential, electron and ion densities, and ion velocity are calculated for various ion temperatures and ion thermal motions. It is shown that the properties of the sheath depend not only on the plasma balance equations but also on the sheath boundary conditions. In addition, effects of the directions and magnitudes of the magnetic field on the plasma sheath are also discussed under different ion temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion-acoustic cnoidal wave and associated non-linear ion flux in dusty plasma

Using reductive perturbation method with appropriate boundary conditions, coupled evolution equations for first and second order potentials are derived for ion-acoustic waves in a collisionless, un-magnetized plasma consisting of hot isothermal electrons, cold ions, and massive mobile charged dust grains. The boundary conditions give rise to renormalization term, which enable us to eliminate secular contribution in higher order terms. Determining the non secular solution of these coupled equations, expressions for wave phase velocity and averaged non-linear ion flux associated with ion-acoustic cnoidal wave are obtained. Variation of the wave phase velocity and averaged non-linear ion flux as a function of modulus (k{sup 2}) dependent wave amplitude are numerically examined for different values of dust concentration, charge on dust grains, and mass ratio of dust grains with plasma ions. It is found that for a given amplitude, the presence of positively (negatively) charged dust grains in plasma decreases (increases) the wave phase velocity. This behavior is more pronounced with increase in dust concentrations or increase in charge on dust grains or decrease in mass ratio of dust grains. The averaged non-linear ion flux associated with wave is positive (negative) for negatively (positively) charged dust grains in the plasma and increases (decreases) with modulus (k{sup 2}) dependent wave amplitude. For given amplitude, it increases (decreases) as dust concentration or charge of negatively (positively) charged dust grains increases in the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alternative auxiliary fields for chiral multiplets

We study 3-form auxiliary field formulation for chiral multiplets in the Wess-Zumino model. The conventional auxiliary fields F and G are replaced by their Hodge duals K{sub {mu}}{sub {nu}}{sub {rho}}{sub {sigma}} and H{sub {mu}}{sub {nu}}{sub {rho}}{sub {sigma}} which are the field strengths of the 3-form potential auxiliary fields G{sub {mu}}{sub {nu}}{sub {rho}} and F{sub {mu}}{sub {nu}}{sub {rho}}. Even though duality transformations connect these two formulations, there exist certain differences from the conventional formulation. When boundary conditions are taken into account, the field equations in the 3-form formulation are equivalent to the conventional ones, while our Lagrangian is not. We also show that the new field strengths acquire generalized Chern-Simons terms. The O'Raifeartaigh mechanism works for spontaneous supersymmetry breaking also in the 3-form auxiliary field formulation via the boundary conditions on the 3-form auxiliary fields.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On Raviart-Thomas and VMS formulations for flow in heterogeneous materials.

It is well known that the continuous Galerkin method (in its standard form) is not locally conservative, yet many stabilized methods are constructed by augmenting the standard Galerkin weak form. In particular, the Variational Multiscale (VMS) method has achieved popularity for combating numerical instabilities that arise for mixed formulations that do not otherwise satisfy the LBB condition. Among alternative methods that satisfy local and global conservation, many employ Raviart-Thomas function spaces. The lowest order Raviart-Thomas finite element formulation (RT0) consists of evaluating fluxes over the midpoint of element edges and constant pressures within the element. Although the RT0 element poses many advantages, it has only been shown viable for triangular or tetrahedral elements (quadrilateral variants of this method do not pass the patch test). In the context of heterogenous materials, both of these methods have been used to model the mixed form of the Darcy equation. This work aims, in a comparative fashion, to evaluate the strengths and weaknesses of either approach for modeling Darcy flow for problems with highly varying material permeabilities and predominantly open flow boundary conditions. Such problems include carbon sequestration and enhanced oil recovery simulations for which the far-field boundary is typically described with some type of pressure boundary condition. We intend to show the degree to which the VMS formulation violates local mass conservation for these types of problems and compare the performance of the VMS and RT0 methods at boundaries between disparate permeabilities.

36 MATERIALS SCIENCE↗

m=1 ideal kink modes in a line-tied screw pinch with finite plasma pressure

A new method for computing ideal magnetohydrodynamic linear eigenmodes in a cylindrical screw pinch with line-tying boundary conditions at the axial ends is presented. In this method, plasma volume is reflected over one of the end planes, and equations and field components are continued into the extended volume with the continuation rules prescribed by the line-tying boundary conditions. Field components in the combined volume are expanded in Fourier series in the axial coordinate. The resulting set of coupled differential equations is solved numerically in the radial coordinate by a finite difference method yielding growth rates and eigenmodes for the system. An example of an m=1 (m is the poloidal wave number) internal kink instability in a force-free plasma equilibrium with uniform pressure is considered. In contrast to a periodic screw pinch, marginally stable perturbations are essentially compressible in the line-tied geometry. Finite compressibility makes the mode more stable in addition to the usual line-tying stabilization in zero pressure plasma. The critical length corresponding to the marginal stability increases with the increase of plasma beta. A universal axial dependence for marginally stable density perturbations {rho}(r,z)={rho}(r)exp[-iz{mu}(r)] is predicted analytically and confirmed numerically, where {mu}(r) depends on the equilibrium magnetic field components as {mu}(r)=B{sub {theta}}/rB{sub z}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal Charging Study of Compressed Expanded Natural Graphite/Phase Change Material Composites

The thermal charging performance of phase change materials, specifically paraffin wax, combined with compressed expanded natural graphite foam is studied under constant heat flux and constant temperature conditions. By varying the heat flux between 0.39 W/cm2 and 1.55 W/cm2 or maintaining a boundary temperature of 60 C for four graphite foam bulk densities, the impact on the rate of thermal energy storage is discussed. Thermal charging experiments indicate that thermal conductivity of the composite is an insufficient metric to compare the influence of graphite foam on the rate of thermal energy storage of the PCM composite. By dividing the latent heat of the composite by the time to melt for various boundary conditions and graphite foam bulk densities, it is determined that bulk density selection is dependent on the applied boundary condition. A greater bulk density is advantageous for samples exposed to a constant temperature near the melting temperature as compared to constant heat flux conditions where a lower bulk density is adequate. Furthermore, the anisotropic nature of graphite foam bulk densities greater than 50 kg/m3 is shown to have an insignificant impact on the rate of thermal charging. These experimental results are used to validate a computational model for future use in the design of thermal batteries for waste heat recovery.

Compressed expanded natural graphite↗

Quantum radiation reaction force on a one-dimensional cavity with two relativistic moving mirrors

We consider a real massless scalar field inside a cavity with two moving mirrors in a two-dimensional spacetime, satisfying the Dirichlet boundary condition at the instantaneous position of the boundaries, for arbitrary and relativistic laws of motion. Considering vacuum as the initial field state, we obtain formulas for the exact value of the energy density of the field and the quantum force acting on the boundaries, which extend results found in previous papers [D. T. Alves, E. R. Granhen, H. O. Silva, and M. G. Lima, Phys. Rev. D 81, 025016 (2010); L. Li and B.-Z. Li, Phys. Lett. A 300, 27 (2002); L. Li and B.-Z. Li, Chin. Phys. Lett. 19, 1061 (2002); L. Li and B.-Z. Li, Acta Phys. Sin. 52, 2762 (2003); C. K. Cole and W. C. Schieve, Phys. Rev. A 64, 023813 (2001)]. For the particular cases of a cavity with just one moving boundary, nonrelativistic velocities, or in the limit of infinity length of the cavity (a single mirror), our results coincide with those found in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kaluza-Klein towers for spinors in warped spaces

All the boundary conditions compatible with the reduction of a five-dimensional spinor field of bulk mass M in a compactified warped space to a four-dimensional brane are derived from the Hermiticity conditions of the relevant operator. The possible presence of metric singularities is taken into account. Examples of resulting Kaluza-Klein spinor towers are given for a representative set of values for the basic parameters of the model and of the parameters describing the allowed boundary conditions, within the hypothesis that there exists one-mass-scale-only, the Planck mass. In many cases, the lowest mass in the tower is small and very sensitive to the parameters while the other masses are much higher and become more regularly spaced. In these cases, if a basic fermion of the standard model (lepton or quark) happens to be the lowest mass of a Kaluza-Klein tower, the other masses would be much larger and weakly dependent on the fermion which defines the tower.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Wightman function and scalar Casimir densities for a wedge with two cylindrical boundaries

Wightman function, the vacuum expectation values of the field square and the energy-momentum tensor are investigated for a massive scalar field with general curvature coupling parameter inside a wedge with two coaxial cylindrical boundaries. It is assumed that the field obeys Dirichlet boundary condition on bounding surfaces. The application of a variant of the generalized Abel-Plana formula enables to extract from the expectation values the contribution corresponding to the geometry of a wedge with a single shell and to present the interference part in terms of exponentially convergent integrals. The local properties of the vacuum are investigated in various asymptotic regions of the parameters. The vacuum forces acting on the boundaries are presented as the sum of self-action and interaction terms. It is shown that the interaction forces between the separate parts of the boundary are always attractive. The generalization to the case of a scalar field with Neumann boundary condition is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated Multiscale Modeling of Molecular Computing Devices

Significant advances were made on all objectives of the research program. We have developed fast multiresolution methods for performing electronic structure calculations with emphasis on constructing efficient representations of functions and operators. We extended our approach to problems of scattering in solids, i.e. constructing fast algorithms for computing above the Fermi energy level. Part of the work was done in collaboration with Robert Harrison and George Fann at ORNL. Specific results (in part supported by this grant) are listed here and are described in greater detail. (1) We have implemented a fast algorithm to apply the Green's function for the free space (oscillatory) Helmholtz kernel. The algorithm maintains its speed and accuracy when the kernel is applied to functions with singularities. (2) We have developed a fast algorithm for applying periodic and quasi-periodic, oscillatory Green's functions and those with boundary conditions on simple domains. Importantly, the algorithm maintains its speed and accuracy when applied to functions with singularities. (3) We have developed a fast algorithm for obtaining and applying multiresolution representations of periodic and quasi-periodic Green's functions and Green's functions with boundary conditions on simple domains. (4) We have implemented modifications to improve the speed of adaptive multiresolution algorithms for applying operators which are represented via a Gaussian expansion. (5) We have constructed new nearly optimal quadratures for the sphere that are invariant under the icosahedral rotation group. (6) We obtained new results on approximation of functions by exponential sums and/or rational functions, one of the key methods that allows us to construct separated representations for Green's functions. (7) We developed a new fast and accurate reduction algorithm for obtaining optimal approximation of functions by exponential sums and/or their rational representations.

99 GENERAL AND MISCELLANEOUS↗

Suppression of long-wavelength CMB spectrum from the no-boundary initial condition

The lack of correlations at the long-wavelength scales of the cosmic microwave background spectrum is a long-standing puzzle and it persists in the latest Planck data. By considering the Hartle–Hawking no-boundary wave function as the initial condition of the inflationary universe, we propose that the power suppression can be the consequence of a massive inflaton, whose initial vacuum is the Euclidean instanton in a compact manifold. We calculate the primordial power spectrum of the perturbations, and find that as long as the scalar field is moderately massive, the power spectrum is suppressed at the long-wavelength scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Black hole thermodynamics from a variational principle: asymptotically conical backgrounds

The variational problem of gravity theories is directly related to black hole thermodynamics. For asymptotically locally AdS backgrounds it is known that holographic renormalization results in a variational principle in terms of equivalence classes of boundary data under the local asymptotic symmetries of the theory, which automatically leads to finite conserved charges satisfying the first law of thermodynamics. We show that this connection holds well beyond asymptotically AdS black holes. In particular, we formulate the variational problem for N = 2 STU supergravity in four dimensions with boundary conditions corresponding to those obeyed by the so called ‘subtracted geometries’. We show that such boundary conditions can be imposed covariantly in terms of a set of asymptotic second class constraints, and we derive the appropriate boundary terms that render the variational problem well posed in two different duality frames of the STU model. This allows us to define finite conserved charges associated with any asymptotic Killing vector and to demonstrate that these charges satisfy the Smarr formula and the first law of thermodynamics. Moreover, by uplifting the theory to five dimensions and then reducing on a 2-sphere, we provide a precise map between the thermodynamic observables of the subtracted geometries and those of the BTZ black hole. Finally, surface terms play a crucial role in this identification.

79 ASTRONOMY AND ASTROPHYSICS↗

Benchmarking the variational cluster approach by means of the one-dimensional Bose-Hubbard model

Convergence properties of the variational cluster approach with respect to the variational parameter space, cluster size, and boundary conditions of the reference system are investigated and discussed for bosonic many-body systems. Specifically, the variational cluster approach is applied to the one-dimensional Bose-Hubbard model, which exhibits a quantum phase transition from Mott to superfluid phase. In order to benchmark the variational cluster approach, results for the phase boundary delimiting the first Mott lobe are compared with essentially exact density matrix renormalization group data. Furthermore, static quantities, such as the ground state energy and the one-particle density matrix are compared with high-order strong coupling perturbation theory results. For reference systems with open boundary conditions the variational parameter space is extended by an additional variational parameter which allows for a more uniform particle density on the reference system and thus drastically improves the results. It turns out that the variational cluster approach yields accurate results with relatively low-computational effort for both the phase boundary as well as the static properties of the one-dimensional Bose-Hubbard model, even at the tip of the first Mott lobe where correlation effects are most pronounced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗