Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Joint routing of conventional and range-extended electric vehicles in a large metropolitan network

Range-extended electric vehicles combine the higher efficiency and environmental benefits of battery-powered electric motors with the longer mileage and autonomy of conventional internal combustion engines. This combination is particularly advantageous for time-constrained delivery routing in dense urban areas, where battery recharging along routes can be too time-consuming to economically justify the use of all-electric vehicles. However, switching from electric to conventional fossil fuel modes also results in higher costs and emissions and lower efficiency. This paper analyzes this heterogeneous vehicle routing problem and describes two solution methods: an exact branch-price-and-cut algorithm and an iterated tabu search metaheuristic. From a methodological perspective, we find that the exact algorithm consistently obtains tight lower bounds that also serve to certify the metaheuristic solutions as near-optimal. From a policy standpoint, we examine a large-scale real-world case study concerning parcel deliveries in the Chicago metropolitan area and quantify various operational metrics including energy costs and vehicle miles traveled. We find that by deploying roughly 20% of range -extended vehicles with a modest all-electric range of 33 miles, parcel distributors can save energy costs by up to 17% while incurring less than 0.5% increase in vehicle miles traveled. Increasing the range to 60 miles further reduces costs by only 4%, which can alternatively be achieved by decreasing the average service time by 1 minute or increasing driver working time by 1 hour. In conclusion, our study reveals several key areas of improvement on which vehicle manufacturers, distributors, and policy makers can focus their attention.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Estimating Energy Bounds for Adoption of Shared Micromobility

Shared micromobility has garnered widespread popularity in recent years, but limited attention has been given to the energy impacts of trips replaced by micromobility. This paper investigates the energy bounds of shared micromobility adoption. Travel demand data at the national and city level were analyzed to identify trips that can be served through micromobility, and scenarios with varying levels of micromobility adoption were evaluated. Results show that peak adoption of shared micromobility can reduce energy consumption from reported passenger travel by 1% at the national level and 2.6% at the city level, with micromobility-induced transit trips identified as the largest contributor for energy reduction. Sensitivity analysis was carried out to show how the energy impacts would change with various levels of key micromobility-related parameters, and results show distance threshold having a stronger influence on the energy impacts, compared to redistribution energy intensity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Comparison of direct and CO 2 -oxidative dehydrogenation of propane

Propane dehydrogenation to propylene has received increasing attention due to the fast growth in propylene demand and the exploration of shale gas containing propane. Direct dehydrogenation of propane (DDHP) offers high propylene selectivity but is limited by quick deactivation due to coke formation. CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP) can consume CO 2 and meanwhile reduce coke deposition via the reverse Boudouard reaction. Here in the current review, direct and CO 2 -assisted dehydrogenation of propane has been compared from three aspects: reaction mechanisms, catalyst compositions, and CO 2 footprint analysis. As the average CO 2 emissions from electricity generation decrease due to the utilization of renewable energy, CO 2 -ODHP potentially leads to a net-negative CO 2 footprint while DDHP cannot.

58 GEOSCIENCES↗
DOE OSTI2024

Innovative biphasic solvent systems for lignocellulosic biorefinery

Bioconversion of lignocellulosics to ethanol is significantly hindered by biomass recalcitrance and, therefore, often requires a biomass pretreatment step. Furan-based compounds such as furfural (FF) and 5-hydroxymethylfurfural (HMF) are versatile building blocks for fuels and chemicals. However, their production during pretreatment often suffers from low yield and low separation efficiency. Biphasic solvent systems are capable of reducing biomass recalcitrance and extracting furans into the organic phase, thus preventing their degradation, increasing their yield, and allowing much easier separation. The development of a sustainable biphasic solvent system is essential to the furan-driven biorefinery and has drawn significant attention. Finally, this review systematically summarizes recent advances in the development of biphasic solvent systems in lignocellulosic biorefinery for improving the production of liquid fuels and furan-based compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Disorder driven variations in magnetoresistance and planar Hall effect in Bi 2 Te 3 thin films

The degenerately doped sesquichalcogenide Bi 2 Te 3 , a well-known thermoelectric material, has attracted much attention in recent years as a topological insulator in which conducting surface states lead to exotic electronic transport. Here, in this study, we report the observation of anisotropic magnetoresistance (AMR) and planar Hall effect (PHE) in polycrystalline thin films of Bi 2 Te 3 over a broad range of temperature and magnetic field strength. The values of AMR, PHE and the Hall mobility (μ H ) are compared with results of similar measurements on single crystals and epitaxial films of Bi 2 Te 3 , where these properties are understood in the framework of electronic transport in the topologically protected conducting surface states. Our textured polycrystalline films show a robust metallic character with a carrier density (n s ) and mobility μ H of 9×10 20 cm -3 and 16.7 cm 2 V -1 s -1 respectively. This carrier density is higher and the mobility lower by an order of magnitude compared to the reported values of n s and μ H in epitaxial films and single crystals. However, we see a comparable AMR and PHE in our films for which the concept of conducting surface states is ill-defined due to their polycrystallinity and disordered structure. We suggest that an anisotropic backscattering of charge carriers in the strongly spin – orbit coupled electronic states of this heavy-metal-based non-magnetic compound may lead to the measured resistivity anisotropy. The observation of AMR and PHE in polycrystalline films may be important for scalable production of Bi 2 Te 3 based AMR and PHE sensors of magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In-situ ATR-IR monitoring of hydrothermal carbonation of wollastonite

In-situ reaction monitoring allows for the development of reaction models for hydrothermal carbonation reactions, which have recently gained attention due to their importance in CO 2 sequestration and utilization. Here, we measured the carbonation kinetics of wollastonite (β- CaSiO 3 ) powder compacts under hydrothermal conditions (90°C and 2.4atm) with the help of optical fiber-based attenuated total reflectance infrared spectroscopy (ATR-IR). Further, the fiber probe was positioned at the target area to study the reaction chemistry at the desired region of the powder compact. Absorbances of solid reactants and products were monitored throughout the entire reaction in the 1000–1600cm -1 spectral range. ATR-IR enabled the detection of amorphous silica, which allowed all solid reactants (β-CaSiO 3 ) and products (CaCO 3 and SiO 2 ) to be monitored independently and simultaneously. A linear proportionality constant between absorbance and CaCO 3 phase concentration was determined and used to construct a reaction kinetics profile for carbonate formation, which revealed a rapid reaction onset, followed by two distinct slower decaying regimes.

42 ENGINEERING↗
DOE OSTI2019

Planning for sustained water-electricity resilience over the U.S.: Persistence of current water-electricity operations and long-term transformative plans

The electricity system relies upon the availability and predictability of water to support hydropower operations and cooling of thermoelectric plants, implying that water plays a fundamental role in power operations and that water-related stresses may have a critical effect on the electricity system. Designing for electricity system resilience to changing societal demands and environmental conditions is a complex and urgent endeavor, one that requires robust diagnosis and an articulation of interdependencies among key system components. Here we consider the argument that water may help to navigate that complexity, revealing thresholds for system change and the transformations that may be required for enduring resilience of the electricity sector. To assess this thesis, we apply a framework for understanding resilient systems following Folke et al., that is extended in this special issue, by which resilience comprises three capabilities: system persistence, adaptability, and transformation. We apply this resilience diagnosis approach to the bulk electricity system of the contiguous United States, with particular attention to water-driven stressors. We provide a qualitative narrative that discusses the spectrum of resilience capabilities (persistence, adaptability, and transformability) of the water-electricity system in the United States over three scales of inter-dependencies: individual power plant, urban and grid scales.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Contributions of biofilm-induced flow heterogeneities to solute retention and anomalous transport features in porous media

We report that microbial biofilms are ubiquitous within porous media and the dynamics of their growth influence surface and subsurface flow patterns which impacts the physical properties of porous media and large-scale transport of solutes. Here, a two-dimensional pore-scale numerical model was used to evaluate the impact of biofilm-induced flow heterogeneities on conservative transport. Our study integrates experimental biofilm images of Paenibacillus 300A strain in a microfluidic device packed with cylindrical grains in a hexagonal distribution, with mathematical modeling. Biofilm is represented as a synthetic porous structure with locally varying physical properties that honors the impact of biofilm on the porous medium. We find that biofilm plays a major role in shaping the observed conservative transport dynamics by enhancing anomalous characteristics. More specifically, when biofilm is present, the pore structure in our geometry becomes more spatially correlated. We observe intermittent behavior in the Lagrangian velocities that switches between fast transport periods and long trapping events. Our results suggest that intermittency enhances solute spreading in breakthrough curves which exhibit extreme anomalous slope at intermediate times and very marked late solute arrival due to solute retention. The efficiency of solute retention by the biofilm is controlled by a transport regime which can extend the tailing in the concentration breakthrough curves. These results indicate that solute retention by the biofilm exerts a strong control on conservative solute transport at pore-scale, a role that to date has not received enough attention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Opportunities for iron and steel industrial wastewater treatment and reuse in the United States

Concerns around water security in the United States have heightened the interest in industrial water treatment and reuse to improve water efficiency and operational reliability. Alongside nationwide efforts to expand industrial capacity, primary manufacturing sectors are adopting more resource-efficient technologies. This transition is expected to shift industrial water consumption patterns, driving the need for improved treatment and reuse practices. This study investigates opportunities for water use, treatment, and reuse in the iron and steel sector through a review of academic and industry literature and interviews with industry representatives. It identifies key challenges in water and wastewater management and outlines the conditions under which innovative treatment technologies could be deployed. Based on these insights, the study presents a practical water management action plan. Furthermore, it assesses water quality targets across different process operations, evaluates existing treatment technologies, and highlights challenges and opportunities for improvement relative to future performance expectations. Although water is often perceived as a low-cost commodity, industry feedback suggests that improvements in water use and treatment efficiency are typically prioritized only when they also reduce energy use, carbon emissions, or costs. This study advocates for a direct two-way partnership between industry and research audiences to bring their attention toward sustainable industrial water use, treatment, and reuse.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Fiber-Shaped Fluidic Nanogenerator with High Power Density for Self-Powered Integrated Electronics

Flow-based hydrovoltaic nanogenerators have attracted particular attention as efficient and facile miniature energy-harvesting devices. However, they deliver relatively low output power density and limited power conversion efficiency owing to inefficient charge separation and poor charge accumulation. Here, we report the fabrication of high-performance, fiber-shaped fluidic nanogenerators (FFNGs) that use MoS 2 -encapsulated C fibers. The FFNGs deliver stable output voltages of 540 mV and an ultrahigh power density of 10.8 W m -2 . With experiments and density functional theory calculations, improvements in output performance can be attributed to smaller energy requirements for Na + cation adsorption, increased charge separation, and diffusion layer formations on the near surface. Moreover, self-powered, integrated devices achieve a maximum total power conversion-storage efficiency of ~11% and stable output voltage up to 3.1 V, which is applicable for use in consumer electronics devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Networks and interfaces as catalysts for polymer materials innovation

Autonomous experimental systems offer a compelling glimpse into a future where closed-loop, iterative cycles—performed by machines and guided by artificial intelligence (AI) and machine learning (ML)—play a foundational role in materials research and development. This perspective draws attention to the roles of networks and interfaces—of and between humans and machines—for the purpose of generating knowledge and accelerating innovation. Polymers, a class of materials with massive global impact, present a unique opportunity for the application of informatics and automation to pressing societal challenges. To develop these networks and interfaces in polymer science, the Community Resource for Innovation in Polymer Technology (CRIPT)—a polymer data ecosystem based on novel polymer data model, representation, search, and visualization technologies—is introduced. The ongoing co-design efforts engage stakeholders in industry, academia, and government to uncover rapidly actionable, high-impact opportunities to build networks, bridge interfaces, and catalyze innovation in polymer technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Significant charge transport effects due to subtle molecular changes in nitroxide radical single crystals

Radical-containing materials have received renewed interest due to their charge-conducting properties. However, most work focuses on macromolecules, while less attention has been paid to radical-containing small molecules. Here, we quantify the electrical conductivity in two organic radical single crystals and demonstrate that a subtle change in atomic connectivity drastically alters the macroscopic electronic properties of the materials. One radical crystal has an electrical conductivity of 3S m –1 , which is the among the highest values for nonconjugated radical conductors over a 1 μm scale. However, the other radical crystal has a 1,000-fold lower conductivity, despite their extremely similar molecular structures. The temperature-dependent conductivity follows the variable range hopping mechanism for both radical crystals, and the difference in effective charge mobility is the reason for the conductivity difference. These results present a clear picture of the design rules and charge transport mechanism for radical-based small-molecule materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Protocol for engineering poly(ethylene terephthalate) hydrolases via directed evolution using a high-throughput screening assay

Poly(ethylene terephthalate) (PET) hydrolases, which depolymerize PET to its monomers, have gained attention for their potential to facilitate bio-industrial recycling of this waste plastic. Here, we present a protocol for screening large, random mutagenesis enzyme libraries simultaneously for enhanced activity, solubility, and stability. We outline steps for library construction, screening using plate-based split GFP and model substrate assays, and determination of enzyme thermostability. We then detail procedures for validation assays on PET substrates and characterization of final variants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Novel method for effectively amplifying human peripheral blood T cells in vitro

The use of chimeric antigen receptor-modified T cells (CAR T cells) is an effective therapy for advanced cancer, especially hematological malignancies, and this method has attracted widespread attention in the last several years. The type, number and vitality of the effector cells clearly play important roles in this approach. In this study, to expand the possibility of curing cancer through adoptive cell therapy (ACT), we developed a novel method for effectively obtaining abundant T cells in vitro. The fusion proteins of three cytokines, SA-hIL-2, SA-hIL-7 and SA-hIL-21, were anchored onto biotin magnetic beads to increase the number of cytokines on the surface of the magnetic beads, which increased the local concentration of cytokines and thus promoted the binding of cytokines to T cells. Next, we examined the effects of these modified magnetic beads on the proliferation rate of T cells and CD19 CAR T cells. In this study, we report the expression and purification of the active bifunctional fusion proteins SA-hIL-2, SA-hIL-7 and SA-hIL-21, which were bound to biotin magnetic beads to develop a platform that was employed to increase the local concentration of cytokines. When the cells had been cultured for 14 days, the proliferation rate of the CD3{sup +} T cells in the group that received cytokine-coupled biotin magnetic beads (Beads-SA-CK) was higher than that of the cells in the groups that received soluble cytokines (Soluble-SA-CK) and that of the cells in the standard group (Standard-CK). We speculate that this difference may be the result of the increased expression of Bcl-2 and the increased phosphorylation of Stat5. Moreover, our results preliminarily indicate that compared with the other two treatments, Soluble-SA-CK and Standard-CK, adding cytokine-coupled biotin magnetic beads more effectively increases the proliferation rate of CD19 CAR-T cells. As expected, the CD19 CAR-T cells stimulated by Beads-SA-CK had a stronger anticancer effect than the cells stimulated by the other two treatments. An effective method of preparing abundant T cells in vitro was developed, and it may provide a novel strategy for ACT.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Neurons die with heightened but functional macro- and chaperone mediated autophagy upon increased amyloid-ß induced toxicity with region-specific protection in prolonged intermittent fasting

Highlights: • Macroautophagy (MA) is strongly engaged upon APP overexpression and remains high over time. • APP colocalization with macroautophagy components remains increased until late, promoting continuous recruitment to the autophagy machinery. • Robust chaperone-mediated autophagy (CMA) engagement is observed in late APP overexpression. • Macroautophagic flux during APP overexpression is preserved, even at late time points, suggesting functional autophagy in the face of apoptosis onset. • Macroautophagy impairment increases markers of amyloidogenesis and further exacerbates the onset of apoptotic cell death. Alzheimer's disease (AD) is a devastating neurodegenerative condition with significant socio-economic impact that is exacerbated by the rapid increase in population aging, particularly impacting already burdened health care systems of poorly resourced countries. Accumulation of the amyloid-β (Aβ) peptide, generated through amyloid precursor protein (APP) processing, manifesting in senile plaques, is a well-established neuropathological feature. Aβ plays a key role in driving synaptic dysfunction, neuronal cell loss, glial cell activation and oxidative stress associated with the pathogenesis of AD. Thus, the enhanced clearance of Aβ peptide though modulation of the mechanisms that regulate intracellular Aβ metabolism and clearance during AD progression have received major attention. Autophagy, a lysosome-based major proteolytic pathway, plays a crucial role in intracellular protein quality control and has been shown to contribute to the clearance of Aβ peptide. However, to what extent autophagy activity remains upregulated and functional in the process of increasing Aβ neurotoxicity is largely unclear. Here, we investigated the extent of neuronal toxicity in vitro by characterising autophagic flux, the expression profile of key amyloidogenic proteins, and proteins associated with prominent subtypes of the autophagy pathway to dissect the interplay between the engagement of proteolytic pathways and cell death onset in the context of APP overexpression. Moreover, we assessed the neuroprotective effects of a caloric restriction regime in vivo on the modulation of autophagy in specific brain regions. Our results reveal that autophagy is upregulated in the presence of high levels of APP and Aβ and remains heightened and functional despite concomitant apoptosis induction, suggestive of a mismatch between autophagy cargo generation and clearance capacity. These findings were confirmed when implementing a prolonged intermittent fasting (IF) intervention in a model of paraquat-induced neuronal toxicity, where markers of autophagic activity were increased, while apoptosis onset and lipid peroxidation were robustly decreased in brain regions associated with neurodegeneration. This work highlights that especially caloric restriction mimetics and controlled prolonged IF may indeed be a highly promising therapeutic strategy at all stages of AD-associated pathology progression, for a cell-inherent and cell specific augmentation of Aβ clearance through the powerful engagement of autophagy and thereby robustly contributing to neuronal protection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Fluctuating pH for efficient photomixotrophic succinate production

Cyanobacteria are attracting increasing attention as a photosynthetic chassis organism for diverse biochemical production, however, photoautotrophic production remains inefficient. Photomixotrophy, a method where sugar is used to supplement baseline autotrophic metabolism in photosynthetic hosts, is becoming increasingly popular for enhancing sustainable bioproduction with multiple input energy streams. In this study, the commercially relevant diacid, succinate, was produced photomixotrophically. Succinate is an important industrial chemical that can be used for the production of a wide array of products, from pharmaceuticals to biopolymers. In this system, the substrate, glucose, is transported by a proton symporter and the product, succinate, is hypothesized to be transported by another proton symporter, but in the opposite direction. Thus, low pH is required for the import of glucose and high pH is required for the export of succinate. Succinate production was initiated in a pH 7 medium containing bicarbonate. Glucose was efficiently imported at around neutral pH. Utilization of bicarbonate by CO 2 fixation raised the pH of the medium. As succinate, a diacid, was produced, the pH of the medium dropped. By repeating this cycle with additional pH adjustment, those contradictory requirements for transport were overcome. pH affects a variety of biological factors and by cycling from high pH to neutral pH processes such as CO 2 fixation rates and CO 2 solubility can vary. In this study the engineered strains produced succinate during fluctuating pH conditions, achieving a titer of 5.0gL -1 after 10 days under shake flask conditions. Finally, these results demonstrate the potential for photomixotrophic production as a viable option for the large-scale production of succinate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of Corynebacterium glutamicum as a monoterpene production platform

Monoterpenes are commonly known for their role in the flavors and fragrances industry and are also gaining attention for other uses like insect repellant and as potential renewable fuels for aviation. Corynebacterium glutamicum, a Generally Recognized as Safe microbe, has been a choice organism in industry for the annual million ton-scale bioproduction of amino acids for more than 50 years; however, efforts to produce monoterpenes in C. glutamicum have remained relatively limited. In this study, we report a further expansion of the C. glutamicum biosynthetic repertoire through the development and optimization of a mevalonate-based monoterpene platform. In the course of our plasmid design iterations, we increased flux through the mevalonate-based bypass pathway, measuring isoprenol production as a proxy for monoterpene precursor abundance and demonstrating the highest reported titers in C. glutamicum to date at 1504.6 mg/L. Our designs also evaluated the effects of backbone, promoter, and GPP synthase homolog origin on monoterpene product titers. Monoterpene production was further improved by disrupting competing pathways for isoprenoid precursor supply and by implementing a biphasic production system to prevent volatilization. With this platform, we achieved 321.1 mg/L of geranoids, 723.6 mg/L of 1,8-cineole, and 227.8 mg/L of linalool. Furthermore, we determined that C. glutamicum first oxidizes geraniol through an aldehyde intermediate before it is asymmetrically reduced to citronellol. Additionally, we demonstrate that the aldehyde reductase, AdhC, possesses additional substrate promiscuity for acyclic monoterpene aldehydes.

59 BASIC BIOLOGICAL SCIENCES↗