Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Negative and positive ion trapping by isotopic molecules in cryocrystals in case of solid parahydrogen containing electrons and H{sub 6}{sup +} radical cations

We performed electron spin resonance studies of trapped electrons and H{sub 6}{sup +} radical cations produced by radiolysis of solid parahydrogen (p-H{sub 2}), p-H{sub 2}-ortho-D{sub 2} (o-D{sub 2}), and p-H{sub 2}-HD mixtures. Yields of trapped electrons, H{sub 6}{sup +} radical cations, and its isotopic analogs H{sub 6-n}D{sub n}{sup +} (4{>=}n{>=}1) increased with increasing o-D{sub 2} and HD concentrations in solid p-H{sub 2}. Electrons were found trapped near an o-D{sub 2} or an HD in solid p-H{sub 2} due to the long-range charge-induced dipole and quadrupole interactions between electrons and isotopic hydrogen molecules. H{sub 6}{sup +} radical cations diffuse in solid p-H{sub 2} by repetition of H{sub 6}{sup +}+H{sub 2}{yields}H{sub 2}+H{sub 6}{sup +} and are trapped by ortho-D{sub 2} or HD to form H{sub 6-n}D{sub n}{sup +} (4{>=}n{>=}1) as isotope condensation reactions. Decay behaviors of these cations by the repetition, isotope condensation, and geminate recombination between electrons and H{sub 6-n}D{sub n}{sup +} (4{>=}n{>=}0) were reproduced by determining the corresponding reaction rate constants k{sub 1}, k{sub 2}, and k{sub 3}. Values of 0.045 and 0.0015 L mol{sup -1} min{sup -1} were obtained for k{sub 1} (H{sub 6}{sup +}+D{sub 2}{yields}H{sub 2}+H{sub 4}D{sub 2}{sup +}) and k{sub 2} (H{sub 4}D{sub 2}{sup +}+D{sub 2}{yields}H{sub 2}+H{sub 2}D{sub 4}{sup +}), respectively, and the value was quasinull for k{sub 3} (H{sub 2}D{sub 4}{sup +}+D{sub 2}{yields}H{sub 2}+D{sub 6}{sup +}). These rate constants suggest that hole mobility drastically decreased in the repetition reaction when H{sub 6}{sup +} radical cations acting as hole carriers formed H{sub 4}D{sub 2}{sup +} or H{sub 2}D{sub 4}{sup +}. HD and D{sub 2} molecules, therefore, act as electron and hole acceptors in irradiated solid p-H{sub 2}-o-D{sub 2} and p-H{sub 2}-HD mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-performance quantum ring detector for the 1-3 terahertz range

Molecular beam epitaxy of InAs/GaAs quantum dots and their subsequent transformation to quantum rings by postepitaxy thermal annealing have been investigated. Photoconductive detectors with multiple quantum ring layers in the active region exhibit dark current density approx10{sup -8} A/cm{sup 2} at a bias of 2 V at 4.2 K. The rings have a single bound state, and emission of photoexcited carriers gives rise to a spectral response peaking at 1.82 THz (165 mum) at 5.2 K. Peak responsivity of 25 A/W, specific detectivity, D*, of 1x10{sup 16} Jones and a total quantum efficiency of 19% are measured with 1 V bias at 5.2 K. At 10 K and 1 V, D*approx3x10{sup 15} Jones is measured.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Continuous distribution of defect states and band gap narrowing in neutron irradiated GaAs

We find that fast neutron irradiated n- and p-GaAs diodes both show a broad feature in deep level transient spectroscopy (DLTS) previously studied primarily in n-GaAs and termed the ''U-band.'' The high temperature edge of the broad DLTS feature cuts off at the same temperature in both n- and p-GaAs suggesting that the cut off is due to the DLTS behavior expected for a continuous density of defect states that spans midgap. The band gap implied by the DLTS midgap cut off is 1.36 eV, as compared to the bulk GaAs band gap 1.52 eV. Band gap narrowing is consistent with previous measurements of lattice expansion in neutron irradiated GaAs. This leads to a model of defect cascades that are regions of narrowed band gap with defect levels that are inhomogeneously broadened. We observe, in addition, that the damage cascades are surrounded by large Coulomb barriers that prevent the complete filling of traps in the damaged regions.

36 MATERIALS SCIENCE↗

Effects of fluorine incorporation into HfO{sub 2} gate dielectrics on InP and In{sub 0.53}Ga{sub 0.47}As metal-oxide-semiconductor field-effect-transistors

In this work, the effects of fluorine (F) incorporation on electrical characteristics of HfO{sub 2}/InP and HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As gate stack are presented. F had been introduced into HfO{sub 2} gate dielectric by postgate CF{sub 4} plasma treatment, which was confirmed by x-ray photoelectron spectroscopy analysis and a secondary ion mass spectrometry technique. Compared to the control sample, fluorinated samples had great improvements in subthreshold swing, hysteresis, the normalized extrinsic transconductance, and the normalized drain current. These improvements can be attributed to the reduction in fixed charge in the HfO{sub 2} bulk and less interface trap density at the HfO{sub 2}/III-V interface.

36 MATERIALS SCIENCE↗

Thickness evaluation of InGaAs/InAlAs quantum wells

This work proposes a new optoelectronic measurement of quantum well (QW) thickness and applies it to doped and undoped In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As multiple-QW structures. Near-infrared spectroscopic identification of the interband optical transition at 100-300 K gave the eigenenergies of the conduction band in the QW. Evaluation of the QW thickness involved analysis of the effective mass at the corresponding eigenenergy. QW thicknesses in the range of 5.45-20.8 nm were determined in six different wafers. These thicknesses agreed well with the QW thicknesses estimated by double-crystal x-ray diffraction within almost two monolayers. This measurement was used to determine the distance of potential boundaries confining the electron wave functions.

36 MATERIALS SCIENCE↗

Real-time observation of anisotropic strain relaxation by three-dimensional reciprocal space mapping during InGaAs/GaAs (001) growth

Real-time three-dimensional reciprocal space mapping (3D-RSM) measurement during In{sub 0.12}Ga{sub 0.88}As/GaAs(001) molecular beam epitaxial growth has been performed to investigate anisotropy in relaxation processes along [110] and [110] directions caused by alpha and beta misfit dislocations (MDs). Anisotropies, strain relaxation, and crystal quality in both directions were simultaneously evaluated via the position and broadness of 022 diffraction in 3D-RSM. In the small-thickness region, strain relaxation caused by alpha-MDs is higher than that caused by beta-MDs, and therefore crystal quality along [110] is worse than that along [110]. Rapid relaxation along both [110] and [110] directions occurs at almost the same thickness. After rapid relaxation, anisotropy in strain relaxation gradually decreases, whereas crystal quality along [110] direction, presumably due to beta-MDs, becomes better that along [110] direction and the ratio does not decay with thickness.

36 MATERIALS SCIENCE↗

InAs quantum wire induced composition modulation in an In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layer grown on an InP substrate

Composition modulations are observed by transmission electron microscopy in In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layers that overgrow both single- and multilayer InAs quantum wire structures grown on an InP substrate. Indium-rich (gallium-deficient) regions were observed in the region of the barrier layer lying directly above individual quantum wires, while indium-deficient (gallium-rich) regions were detected in the barrier above the gaps between adjacent underlying quantum wires. The magnitude of such modulation was typically 7% (atomic percent) for both indium and gallium as estimated from the energy dispersive x-ray analysis. The origin of such composition modulations was determined by modeling the chemical potential distribution for indium and gallium on the growth front of the barrier layer at the initial capping stage of the quantum wires with finite element simulations. It is found that the number and positions of the indium-rich regions are determined by the combined effects of strain and surface energy distributions on the barrier material capping the quantum wires. Moreover the estimated magnitudes of the composition modulation for both indium and gallium from the finite element models are in good agreement with the experimental observations. This method provides a simple way to understand the origin of, and to estimate the magnitude of the quantum wire-induced composition modulation in the barrier layer.

36 MATERIALS SCIENCE↗

Impact of ion-implantation-induced band gap engineering on the temperature-dependent photoluminescence properties of InAs/InP quantum dashes

We report on the effects of the As/P intermixing induced by phosphorus ion implantation in InAs/InP quantum dashes (QDas) on their photoluminescence (PL) properties. For nonintermixed QDas, usual temperature-dependent PL properties characterized by a monotonic redshift in the emission band and a continual broadening of the PL linewidth as the temperature increases, are observed. For intermediate ion implantation doses, the inhomogeneous intermixing enhances the QDas size dispersion and the enlarged distribution of carrier confining potential depths strongly affects the temperature-dependent PL properties below 180 K. An important redshift in the PL emission band occurs between 10 and 180 K which is explained by a redistribution of carriers among the different intermixed QDas of the ensemble. For higher implantation doses, the homogeneous intermixing reduces the broadening of the localized QDas state distribution and the measured linewidth temperature behavior matches that of the nonintermixed QDas. An anomalous temperature-dependent emission energy behavior has been observed for extremely high implantation doses, which is interpreted by a possible QDas dissolution.

36 MATERIALS SCIENCE↗

In situ growth of superconducting NdFeAs(O,F) thin films by molecular beam epitaxy

Superconducting NdFeAs(O,F) thin films were grown on GaAs substrates by molecular beam epitaxy. Films grown with a sufficiently long growth time exhibited a clear superconducting transition with an onset temperature up to 48 K and zero resistance temperature up to 42 K without the need of an ex situ annealing process. Electron probe microanalysis and Hall coefficient measurements indicated that the superconducting films are doped with fluorine, and depth-profile analysis by Auger electron spectroscopy revealed the formation of a NdOF layer near the surface, which is probably connected with the fluorine doping.

36 MATERIALS SCIENCE↗

Nanoheteroepitaxy of gallium arsenide on strain-compliant silicon-germanium nanowires

Heterogeneous integration of high-quality GaAs on Si-based substrates using a selective migration-enhanced epitaxy (MEE) of GaAs on strain-compliant SiGe nanowires was demonstrated for the first time. The physics of compliance in nanoscale heterostructures was captured and studied using finite-element simulation. It is shown that nanostructures can provide additional substrate compliance for strain relief and therefore contribute to the formation of defect-free GaAs on SiGe. Extensive characterization using scanning electron microscopy and cross-sectional transmission electron microscopy was performed to illustrate the successful growth of GaAs on SiGe nanowire. Raman and Auger electron spectroscopy measurements further confirmed the quality of the GaAs grown and the high growth selectivity of the MEE process.

36 MATERIALS SCIENCE↗

Co doping enhanced giant magnetocaloric effect in Mn{sub 1-x}Co{sub x}As films epitaxied on GaAs (001)

A giant magnetocaloric effect was found in series of Mn{sub 1-x}Co{sub x}As films epitaxied on GaAs (001). The maximum magnetic entropy change caused by a magnetic field of 4 T is as large as 25 J/kg K around room temperature, which is about twice the value of pure MnAs film. The observed small thermal hysteresis is more suitable for practical application. Growing of layered Mn{sub 1-x}Co{sub x}As films with Co concentration changing gradually may draw layered active magnetic regenerator refrigerators closer to practical application. Our experimental result may provide the possibility for the combination of magnetocaloric effect and microelectronic circuitry.

36 MATERIALS SCIENCE↗

Coupling of single InGaAs quantum dots to the plasmon resonance of a metal nanocrystal

The authors report the coupling of single InGaAs quantum dots (QDs) to the surface plasmon resonance of a metal nanocrystal. Clear enhancement of the photoluminescence (PL) in the spectral region of the surface plasmon resonance is observed which splits up into distinct emission lines from single QDs in micro-PL. The hybrid metal-semiconductor structure is grown by molecular beam epitaxy on GaAs (100) utilizing the concept of self-organized anisotropic strain engineering for realizing ordered arrays with nanometer-scale precise positioning of the metal nanocrystals with respect to the QDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impact of heavy hole-light hole coupling on optical selection rules in GaAs quantum dots

We report strong heavy hole-light hole mixing in GaAs quantum dots grown by droplet epitaxy. Using the neutral and charged exciton emission as a monitor we observe the direct consequence of quantum dot symmetry reduction in this strain free system. By fitting the polar diagram of the emission with simple analytical expressions obtained from k{center_dot}p theory we are able to extract the mixing that arises from the heavy-light hole coupling due to the geometrical asymmetry of the quantum dot.

36 MATERIALS SCIENCE↗

Magnetic anisotropies of laterally confined structures of epitaxial Fe films on GaAs (001)

We have investigated magnetic properties of laterally confined structures of epitaxial Fe films on GaAs (001). Fe films with different thicknesses were grown by molecular-beam epitaxy and patterned into regular arrays of rectangles with varying aspect ratios. In-plane magnetic anisotropy was observed in all of the patterned Fe films both at 15 and 300 K. We have demonstrated that the coercive fields can be tuned by varying the aspect ratios of the structures. The magnitudes of the corresponding anisotropy constants have been determined and the shape anisotropy constant is found to be enhanced as the aspect ratio is increased.

36 MATERIALS SCIENCE↗

Evolution of pyramid morphology during InAs(001) homoepitaxy

Growth of InAs(001) homoepitaxial layer has been carried out especially at the bistable region, where the coexistence of both In-stabilized (4x2) and As-stabilized (2x4) surface reconstruction are found to be predominant. The observation of pyramid morphology in this bistable region is reported here. Atomic force microscopy studies have been performed on such pyramids. The heights of the observed pyramids vary from 12 to 26 nm with their bases from 3.6x1.2 to 18x6.3 {mu}m{sup 2}. Formation of such pyramids in the bistable region is attributed to the unique anomalous As-desorption observed during the surface reconstruction.

36 MATERIALS SCIENCE↗

Low frequency noise in InSb/GaAs and InSb/Si channels

The low frequency noise features of InSb grown on GaAs and Si substrates using molecular-beam epitaxy are investigated in the temperature range from 80 to 300 K. In all samples the flicker noise dominates the spectra, with Hooge factors as low as 2x10{sup -5} and 9x10{sup -5} for InSb on GaAs and Si, respectively. The temperature dependence of the Hooge factors is investigated.

36 MATERIALS SCIENCE↗

Metamorphic quantum dots: Quite different nanostructures

In this work, we present a study of InAs quantum dots deposited on InGaAs metamorphic buffers by molecular beam epitaxy. By comparing morphological, structural, and optical properties of such nanostructures with those of InAs/GaAs quantum dot ones, we were able to evidence characteristics that are typical of metamorphic InAs/InGaAs structures. The more relevant are: the cross-hatched InGaAs surface overgrown by dots, the change in critical coverages for island nucleation and ripening, the nucleation of new defects in the capping layers, and the redshift in the emission energy. The discussion on experimental results allowed us to conclude that metamorphic InAs/InGaAs quantum dots are rather different nanostructures, where attention must be put to some issues not present in InAs/GaAs structures, namely, buffer-related defects, surface morphology, different dislocation mobility, and stacking fault energies. On the other hand, we show that metamorphic quantum dot nanostructures can provide new possibilities of tailoring various properties, such as dot positioning and emission energy, that could be very useful for innovative dot-based devices.

36 MATERIALS SCIENCE↗

Microwave induced zero-conductance state in a Corbino geometry two-dimensional electron gas with capacitive contacts

Microwave induced photoconductivity of a two-dimensional electron gas in selectively doped GaAs/AlAs heterostructures has been studied using the Corbino geometry with capacitive contacts at a temperature T=1.6 K and magnetic field B up to 0.5 T. Zero-conductance states have been observed in the samples under study subject to microwave radiation, similarly to the samples with Ohmic contacts. It has been shown that Ohmic contacts do not play a significant role for observation of zero-conductance states induced by microwave radiation.

36 MATERIALS SCIENCE↗