Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “#msfc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Gravitational macrosegregation in binary Pb-Sn alloy ingots

A space shuttle experiment employing the General Purpose (Rocket) Furnace (GPF) in its isothermal mode of operation is manifested on MSL-3, circa 1989. The central aim of this experiment is to investigate the effect of reduced gravity levels on the segregation behavior in a slowly, and isothermally, cooled sample of a binary Pb-15 wt% Sn alloy. This experiment should be able to simulate, in a small laboratory sample, some aspects of the segragation phenomena occurring in large industrial ingots. Ground-based experiments conducted in the single-cavity simulator of the GPF, in support of the microgravity experiment are described in detail. The results of the MSFC experiments are compared with other related experiments conducted at Case Western Reserve University (CWRS), wherein the isothermal constraints were relaxed. The isothermally processed samples indicate a small and gradual increase in fraction eutectic, and a corresponding increase in tin content, from the bottom to the top of the ingot. The radial variations are minimal near the ingot bottom, but there are large radial variations in the top half. In the CWRU experiments, more severe segregations, including segregation defects known as freckles. Follow up experiments employing the GPF without the isothermal constraints, or other suitably modified space shuttle hardware are suggested.

Laxmanan, V.↗
NASA NTRS1986

Thermal infrared imaging of Comet Halley

Thermal infrared images (10.8, 12.8, and 19.2 microns) of comet Halley were obtained on 1986 Mar. 28.7, 29.7 and 30.7 UT using the NASA-MSFC 20-pixel bolometer array at the NASA Infrared Telescope Facility. Analysis of the observations shows: the presence of spatial structure indicative of dust ejection occurring mainly on the sunward side of the nucleus; a dust coma deficient in large particles (radius greater than 100 microns) compared with that of Comet P/Giacobini-Zinner, temporal variability consistent with an extrapolation of a quasi-sinusoidal light curve observed by IUE on 1986 March 23, 24, and 25; and a maximum at the nuclear condensation of the color temperature and the strength of the silicate emission feature.

Campins, H.↗
NASA NTRS1987

Boundary layer simulation improvement

The current Boundary Layer Integral Matrix Procedure - Version J (BLIMPJ) is advanced with regard to the previously modeled calculation methods accounting for surface roughness, relaminarization, condensed phase, and thick boundary layer effects. Current analytical limitations will be relaxed to permit more realistic wall and flow conditions and to use appropriate turbulence models with specific emphasis for the projected Orbit Transfer Vehicle (OTV) engine application. The updates will be incorporated into the BLIMPJ computer program, and the modified program will be made operational on the MSFC CRAY computer system. Experimental feasibility studies were conducted to find out how to obtain quality test data with advanced instrumentation for concept verification purposes.

Praharaj, Sarat C.↗
NASA NTRS1987

Program risk analysis handbook

NASA regulations specify that formal risk analysis be performed on a program at each of several milestones. Program risk analysis is discussed as a systems analysis approach, an iterative process (identification, assessment, management), and a collection of techniques. These techniques, which range from extremely simple to complex network-based simulation, are described in this handbook in order to provide both analyst and manager with a guide for selection of the most appropriate technique. All program risk assessment techniques are shown to be based on elicitation and encoding of subjective probability estimates from the various area experts on a program. Techniques to encode the five most common distribution types are given. Then, a total of twelve distinct approaches to risk assessment are given. Steps involved, good and bad points, time involved, and degree of computer support needed are listed. Why risk analysis should be used by all NASA program managers is discussed. Tools available at NASA-MSFC are identified, along with commercially available software. Bibliography (150 entries) and a program risk analysis check-list are provided.

Batson, R. G.↗
NASA NTRS1986

Containerless processing technology

Ground- and space-based containerless processing levitation devices are described. Experiments performed in the MSFC drop tube, the JPL drag-free drop facilities, a single-axis tuned cavity acoustic levitator furnace on TEXUS-I, and a three-axis acoustic levitator and furnace on the STS-11 mission are discussed. Neither acoustic interference nor aerodynamic levitation trials have yielded promising results in sounding rocket and STS based experiments. An electrostatic levitator has furnished a high degree of positioning control with multiple objects in a terrestrial laboratory.

Naumann, R. J.↗
NASA NTRS1986

Reliability and maintenance simulation of the Hubble Space Telescope

An analytical approach is presented which was developed and implemented at MSFC specifically for the Space Telescope Program to provide comparisons of critical item failures, system downstates, on-orbit servicing versus return for ground maintenance, overall system downtime, and to obtain a measure of expected uptime for science functions.

Pizzano, F.↗
NASA NTRS1986

The AXAF technology mirror assembly program - An overview

The manufacture and testing of the Technology Mirror Assembly (TMA), a prototype Wolter I telescope scaled to the dimensions of the innermost element of the High-Resolution Mirror Assembly for the NASA Advanced X-ray Astrophysics Facility (AXAF), are reviewed. Consideration is given to the grinding, polishing, coating, and assembly of the zerodur TMA blanks, the TMA mount design, and the test procedures used at the MSFC X-ray Calibration Facility. Test results indicate FWHM resolution less than 0.5 arcsec, but with significant near-field scattering attributed to ripple; further long-lap polishing is suggested.

Wyman, Charles L.↗
NASA NTRS1986

National Space Transportation System telemetry distribution and processing, NASA-JFK Space Center/Cape Canaveral

Prelaunch, launch, mission, and landing distribution of RF and hardline uplink/downlink information between Space Shuttle Orbiter/cargo elements, tracking antennas, and control centers at JSC, KSC, MSFC, GSFC, ESMC/RCC, and Sunnyvale are presented as functional block diagrams. Typical mismatch problems encountered during spacecraft-to-project control center telemetry transmissions are listed along with new items for future support enhancement.

Jenkins, George↗
NASA NTRS1985

Photographic film as a detector for solar X-ray/XUV astronomical applications

The characteristics of several films as detectors for solar soft X-ray (3-100 A) and XUV (100-600 A) radiation are discussed. The properties of soft-X-ray-sensitive films like the SO-212 make them useful for the glancing-incidence X-ray telescopes. Used for the MSFC X-Ray Telescope during the Skylab mission (at the wavelengths of 8.34 and 15.4 A), the SO-212 film functioned as a photon detector, achieving spatial resolution of 2.2 arc sec. Other high-resolution soft-X-ray-sensitive films include SO-242 and 101-07. For XUV detection, the SC-5, SC-7, 104-07, and 101-07 films are recommended.

Hoover, Richard B.↗
NASA NTRS1987

Development of optical modulators for measurements of solar magnetic fields

The measurement of polarized light allows solar astronomers to infer the magnetic field on the Sun. The accuracy of these measurements is dependent on the stable retardation characteristics of the polarization modulators used to minimize the atmospheric effects seen in ground-based observations. This report describes the work by the Space Science Laboratory at Marshall Space Flight Center to improve two types of polarization modulators. As a result, the timing characteristics for both electrooptic crystals (KD*Ps) and liquid crystal devices (LCDs) have been studied and will be used to enhance the capabilities of the MSFC Vector Magnetograph.

West, E. A.↗
NASA NTRS1987

Low thrust viscous nozzle flow fields prediction

An existing Navier-Stokes code (PARC2D) was used to compute the nozzle flow field. Grids were generated by the interactive grid generator codes TBGG and GENIE. All computations were made on the NASA/MSFC CRAY X-MP computer. Comparisons were made between the computations and MSFC in-house wall pressure measurements for CO2 flow through a conical nozzle having an area ratio of 40. Satisfactory agreements exist between the computations and measurements for different stagnation pressures of 29.4, 14.7, and 7.4 psia, at stagnation temperature of 1060 R. However, agreements did not match precisely near the nozzle exit. Several reasons for the lack of agreement are possible. The computational code assumes a constant gas gamma, whereas the gamma i.e. the specific heat ratio for CO2 varied from 1.22 in the plenum chamber to 1.38 at the nozzle exit. The computations also assumes adiabatic and no-slip walls. Both assumptions may not be correct. Finally, it is possible that condensation occurs during the nozzle expansion at the low stagnation pressure. The next phase of the work will incorporate variable gamma and slip wall boundary conditions in the computational code and develop a more accurate computer code.

Liaw, Goang-Shin↗
NASA NTRS1987

Atmospheric electricity

In the last three years the focus was on the information contained in the lightning measurement, which is independent of other meteorological measurements that can be made from space. The characteristics of lightning activity in mesoscale convective systems were quantified. A strong relationship was found between lightning activity and surface rainfall. It is shown that lightning provides a precursor signature for wet microbursts (the strong downdrafts that produce windshears hazardous to aircraft) and that the lightning signature is a direct consequence of storm evolution. The Universities Space Research Association (USRA) collaborated with NASA scientists in the preliminary analysis and scientific justification for the design and deployment of an optical instrument which can detect lightning from geostationary orbit. Science proposals for the NASA mesoscale science program and for the Tethered Satellite System were reviewed. The weather forecasting research and unmanned space vehicles. Software was written to ingest and analyze the lightning ground strike data on the MSFC McIDAS system. The capabilities which were developed have a wide application to a number of problems associated with the operational impacts of electrical discharge within the atmosphere.

Source record↗
NASA NTRS1988

Research study for materials/properties test results database

The Lubricants Data Base System was designed and developed for operation on the DEC PDP 11/24 computer. The procedures are written in Datatrieve. In transferring the Lubricants System to the VAX 8600 computer, the Datatrieve had to be 80 percent rewritten. At the end of the contract the Lubricants System is operational on both the PDP 11/24 and VAX 8600 computers. The LOX/GOX, Aluminum/Steel, Toxic, VCM, and Flammability Systems are operational only on the PDP 11/24 computer. The Toxic, VCM, and Flammability Systems do not contain any useable data, only test data. However, the LOX/GOX file does contain test data results supplied by MSFC.

Source record↗
NASA NTRS1987

Evaluation of high-voltage, high-power, solid-state remote power controllers for amps

The Electrical Power Branch at Marshall Space Flight Center has a Power System Development Facility where various power circuit breadboards are tested and evaluated. This project relates to the evaluation of a particular remote power controller (RPC) energizing high power loads. The Facility equipment permits the thorough testing and evaluation of high-voltage, high-power solid-state remote power controllers. The purpose is to evaluate a Type E, 30 Ampere, 200 V dc remote power controller. Three phases of the RPC evaluation are presented. The RPC is evaluated within a low-voltage, low-power circuit to check its operational capability. The RPC is then evaluated while performing switch/circuit breaker functions within a 200 V dc, 30 Ampere power circuit. The final effort of the project relates to the recommended procedures for installing these RPC's into the existing Autonomously Managed Power System (AMPS) breadboard/test facility at MSFC.

Callis, Charles P.↗
NASA NTRS1987

Verification of FANTASTIC integrated code

FANTASTIC is an acronym for Failure Analysis Nonlinear Thermal and Structural Integrated Code. This program was developed by Failure Analysis Associates, Palo Alto, Calif., for MSFC to improve the accuracy of solid rocket motor nozzle analysis. FANTASTIC has three modules: FACT - thermochemical analysis; FAHT - heat transfer analysis; and FAST - structural analysis. All modules have keywords for data input. Work is in progress for the verification of the FAHT module, which is done by using data for various problems with known solutions as inputs to the FAHT module. The information obtained is used to identify problem areas of the code and passed on to the developer for debugging purposes. Failure Analysis Associates have revised the first version of the FANTASTIC code and a new improved version has been released to the Thermal Systems Branch.

Chauhan, Rajinder Singh↗
NASA NTRS1987

The determination of equivalent bearing loading for the BSMT that simulate SSME high pressure oxidizer turbopump conditions using the SHABERTH/SINDA computer programs

The MSFC bearing seal material tester (BSMT) can be used to evaluate the SSME high pressure oxygen turbopump (HPOTP) bearing performance. The four HPOTP bearings have both an imposed radial and axial load. These radial and axial loads are caused by the HPOTP's shaft, main impeller, preburner impeller, turbine and by the LOX coolant flow through the bearings, respectively. These loads coupled with bearing geometry and operating speed can define bearing contact angle, contact Hertz stress, and heat generation rates. The BSMT has the capability of operating at HPOTP shaft speeds, provide proper coolant flowrates but can only apply an axial load. Due to the inability to operate the bearings in the BSMT with an applied radial load, it is important to develop an equivalency between the applied axial loads and the actual HPOTP loadings. A shaft-bearing-thermal computer code (SHABERTH/SINDA) is used to simulate the BSMT bearing-shaft geometry and thermal-fluid operating conditions.

Mcdonald, Gary H.↗
NASA NTRS1988

MCT crystal growth

Convection and segregation in directional solidification and crystal growth by the Bridgman-Stockbarger technique are traditionally treated by assuming axisymmetric thermal condition on the ampoule wall. It is, however, difficult to achieve such a condition in an experimental setup. Any deviation from an axisymmetric temperature field on the wall of a vertical ampoule represents a horizontal temperature gradient. The horizontal density gradient that results from thermal expansion in the melt under this condition must lead on earth to some buoyance-driven convection, no matter what the axial (vertical) temperature distribution that is imposed on the melt. The magnitude of such convective flows for conditions representative of the MSFC mercury-cadmium-telluride (MCT) Bridgman setup is studied.

Baird, James K.↗
NASA NTRS1988

Atmospheric Science and Remote Sensing Laboratory

During the contract year, scientific research on lightning and lightning hazards was carried out for the Atmospheric Electricity Group in the MSFC Remote Sensing Branch (ED43). These tasks included research on modeling the interaction of lightning optical pulses and cloud particles, estimating lightning hazard threats to the STS system, a small field project to determine the charge structure of winter and stratiform thunderstorms, and analysis of optical pulse data. These activities were performed in conjunction with the ED43 mission to develop a lightning mapper to be placed on one of the GOES-next operational satellites.

Mach, Douglas↗