Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “work”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Advanced X-ray Astrophysics Facility (AXAF): Science working group report

The Advanced X-Ray Astrophysics Facility (AXAF) mission concept is examined from a scientific viewpoint. A brief description of the development of X-ray astronomy and a summary description of AXAF, the scientific objectives of the facility, a description of representative scientific instruments, requirements for X-ray ground testing, and a summary of studies related to spacecraft and support subsystems, are included.

Source record↗
NASA NTRS1979

The space shuttle at work

The concept of the orbital flight of the space shuttle and the development of the space transportation system are addressed. How the system came to be, why it is designed the way it is, what is expected of it, and how it may grow are among the questions considered. Emphasis is placed on the effect of the space transportation system on U.S. space exploration in the next decade, including plans to make space an extension of life on the Earth's surface.

Allaway, H.↗
NASA NTRS1980

Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading

The aerodynamic design, the performance, and an internal loss breakdown were examined for a 15.04 cm tip diameter, radial-inflow turbine. The design application was to drive a two stage, 10 to 1 pressure ratio compressor with a mass flow of 0.952 kg/sec and a rotative speed of 70,000 rmp. The turbine inlet temperature was 1478 K, and the turbine was designed with blades thick enough for internal cooling passages. The rotor tip diameter was limited to 86 percent of optimum in order to obtain a reduced tip speed design. The turbine was fabricated with solid, uncooled blading and tested in air at nominal inlet pressure and temperature of 1.379 x 10000 N/sq m and 322.2 K, respectively. Results indicated the turbine total efficiency to be 5.3 points less than design. Analysis of these results has indicated the deficit in performance to be due to stator secondary flow losses, vaneless space surface friction losses, and trailing edge wake mixing losses.

Mclallin, K. L.↗
NASA NTRS1980

Eyewitness report on Chinese satellite work

The article describes the current status of satellite and related technology in the People's Republic of China. Attention is given to areas of potential cooperation and scientific and technical 'exchanges'. It is reported that the Chinese technology is 'advanced, but simple' and that the Chinese showed great interest in receiving U.S. technical know-how.

Edelson, B.↗
NASA NTRS1979

Operator Station Design System - A computer aided design approach to work station layout

The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

Lewis, J. L.↗
NASA NTRS1979

Man-machine analysis of translation and work tasks of Skylab films

An objective approach to determine the concurrent validity of computer-graphic models is real time film analysis. This technique was illustrated through the procedures and results obtained in an evaluation of translation of Skylab mission astronauts. The quantitative analysis was facilitated by the use of an electronic film analyzer, minicomputer, and specifically supportive software. The uses of this technique for human factors research are: (1) validation of theoretical operator models; (2) biokinetic analysis; (3) objective data evaluation; (4) dynamic anthropometry; (5) empirical time-line analysis; and (6) consideration of human variability. Computer assisted techniques for interface design and evaluation have the potential for improving the capability for human factors engineering.

Hosler, W. W.↗
NASA NTRS1980

The role of cesium suboxides in low-work-function surface layers studied by X-ray photoelectron spectroscopy - Ag-O-Cs

The oxidation of cesium on silver substrates has been studied using photoyield measurements and X-ray photoelectron spectroscopy. The occurrence of two O1s peaks in the core-level spectrum at 527.5 and 531.5-eV binding energy for cesium and oxygen exposures giving the optimum photoyield proves that two oxides of cesium exist in high-photoyield surfaces, and not Cs2O alone as previously thought. From the shape and position of the cesium peaks and the Auger parameter, the assignment of the O1s peaks at 527.5- and 531.5-eV binding energies to oxygen in Cs2O and Cs11O3, respectively, can be made. Hence the total cesium-oxygen layer is a mixed phase consisting of Cs2O + Cs11O3, approximately 20-40 A thick.

Yang, S.-J.↗
NASA NTRS1980

Results from study of potential early commercial MHD power plants and from recent ETF design work

The study deals with different 'moderate technology' entry-level commercial MHD power plants. Two of the reference plants are based on combustion of coal with air preheated in a high-temperature regenerative air heater separately fired with a low-BTU gas produced in a gasifier integrated with the power plant. The third reference plant design is based on the use of oxygen enriched combustion air. Performance calculations show that an overall power plant efficiency of the order of 44% can be reached with the use of oxygen enrichment.

Hals, F.↗
NASA NTRS1980

Fluid-electrolyte shifts and thermoregulation - Rest and work in heat with head cooling

The effects of head cooling on thermoregulation and associated plasma fluid and electrolyte shifts during rest and submaximal exercise in the heat are investigated. Thermoregulatory responses and plasma volume were measured in four male subjects fitted with liquid-cooled neoprene headgear during 60 min of rest, 60 min of ergometer exercise at 45% maximal oxygen uptake and 30 min of recovery in the supine position at 40.1 C and 40% relative humidity. It is found that, compared to control responses, head cooling decreased thigh sweating and increased mean skin temperature at rest and attenuated increases in thigh sweating, heart rate, rectal temperature and ventilation during exercise. During recovery, cooling is observed to facilitate decreases in sweat rate, heart rate, rectal temperature and forearm blood flow and enhance the increase in average temperature. Cooling had no effect on plasma protein, osmotic or electrolyte shifts, and decreased plasma volume losses. The findings indicate the effectiveness of moderate head cooling for the improvement of human performance during exercise in heat.

Greenleaf, J. E.↗
NASA NTRS1980

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program, appendix C

The problem is to operate on two scalar fields to produce a vector field, to produce user products from the vector field, and to establish reliability of results. Data problems encountered include sparse measurements, irregular distribution, varying quality, imperfect orthogonality, aliasing due to sampling volume, and measurements not simultaneous. Desired algorithm characteristics, solution elements, and characteristics of the model are listed. The seven simulation elements, eight algorithm steps and the required user inputs are given.

Lee, R. W.↗
NASA NTRS1980

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program, appendix J

Three projects are suggested which could be done using the Doppler lidar. The first is a cooperative effort at BAO, the purpose of which is to check out instrumentation and contribute to boundary layer investigations at BAO. The second concerns unintended weather modification. Its purpose is to detect mechanisms by which regions of industry and urbanization modify weather. The cirrus cloud study proposes to characterize cirrus clouds by their lidar signal and to compare lidar and visually observed characteristics.

Koenig, L. R.↗
NASA NTRS1980

Validation Methods Research for Fault-Tolerant Avionics and Control Systems Sub-Working Group Meeting. CARE 3 peer review

A computer aided reliability estimation procedure (CARE 3), developed to model the behavior of ultrareliable systems required by flight-critical avionics and control systems, is evaluated. The mathematical models, numerical method, and fault-tolerant architecture modeling requirements are examined, and the testing and characterization procedures are discussed. Recommendations aimed at enhancing CARE 3 are presented; in particular, the need for a better exposition of the method and the user interface is emphasized.

Trivedi, K. S.↗
NASA NTRS1980

Comet Science Working Group report on the Halley Intercept Mission

The Halley Intercept Mission is described and the scientific benefits expected from the program are defined. One characteristic of the mission is the optical navigation and resulting accurate delivery of the spacecraft to a desired point near the nucleus. This accuracy of delivery has two important implications: (1) high probability that the mass spectrometers and other in situ measurement devices will reach the cometary ionosphere and the zone of parent molecules next to the nucleus; (2) high probability that sunlit, high resolution images of Halley's nucleus will be obtained under proper lighting conditions. In addition an observatory phase is included during which high quality images of the tail and coma structure will be obtained at progressively higher spatial resolutions as the spacecraft approaches the comet. Complete measurements of the comet/solar wind interaction can be made around the time of encounter. Specific recommendations are made concerning project implementation and spacecraft requirements.

Source record↗
NASA NTRS1981

Recent work on an RF ion thruster

An experimental investigation of an rf ion thruster using an immersed coupler in an argon discharge is reported. The conical coil, used to couple rf power into the discharge, is placed inside the discharge vessel. The discharge was self-sustained by 100-150 MHz rf power at low environmental pressures. The ion extraction was accomplished by conventional accelerated grid optics from an unoptimized 8 cm diameter ion thruster.

Lee, R. Q.↗
NASA NTRS1981

Satellite altimetric measurements of the ocean. Report of the TOPEX Science Working Group

The scientific usefulness of satellite measurements of ocean topography for the study of ocean circulation was investigated. The following topics were studied: (1) scientific problems which use altimetric measurements of ocean topography; (2) the extent in which in situ measurements are complementary or required; (3) accuracy, precision, and spatial and temporal resolutions which are required of the topographic measurements; (4) errors associated with measurement techniques; and (5) influences of these errors on scientific problems. An operational system for measuring ocean topography, was defined and the cost of conducting such a topographic experiment, was estimated.

Stewart, R.↗
NASA NTRS1980

Ground experiments for finding principles and working out methods for preventing adverse effects of weightlessness on the human organism

A comparative assessment of the effectiveness of different prophylactic procedures to prevent the adverse effects of weightlessness is presented. It is concluded that: physical training is most effective but no single method by itself produces the full effect, and an adjustment of regimes to one another enhances the effect. The approved complex of prophylactic procedures affected basic changes occurring in hypokinesia: deficit of muscular activity, no or reduced BP hydrostatic component, reduced volume of blood circulation, reduced hydration level, and the application of various prophylactic complexes during 49 day antiorthostatic hypodynamia eliminated or reduced the adverse effects of weightlessness in simulation.

Kakurin, L. I.↗