Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 1: Executive summary

An array deployment assembly, power regulation and control assembly, the necessary interface, and display and control equipment comprise the power extension package (PEP) which is designed to provide increased power and duration, as well as reduce fuel cell cryogen consumption during Spacelab missions. Compatible with all currently defined missions and payloads, PEP imposes minimal weight and volume penalties on sortie missions, and can be installed and removed as needed at the launch site within the normal Orbiter turnaround cycle. The technology on which it is based consists of a modified solar electric propulsion array, standard design regulator and control equipment, and a minimally modified Orbiter design. The requirements from which PEP was derived, and the system and its performance capabilities are described. Features of the recommended project are presented.

Source record↗

The value of volume and growth measurements in timber sales management of the National Forests

This paper summarizes work performed in the estimation of gross social value of timber volume and growth rate information used in making regional harvest decisions in the National Forest System. A model was developed to permit parametric analysis. The problem is formulated as one of finding optimal inventory holding patterns. Public timber management differs from other inventory holding problems in that the inventory, itself, generates value over time in providing recreational, aesthetic and environmental goods. 'Nontimber' demand estimates are inferred from past Forest Service harvest and sales levels. The solution requires a description of the harvest rates which maintain the optimum inventory level. Gross benefits of the Landsat systems are estimated by comparison with Forest Service information gathering models. Gross annual benefits are estimated to be $5.9 million for the MSS system and $7.2 million for the TM system.

Lietzke, K. R.↗

Determination of volume fraction in multiphase systems using incomplete pole figures

The determination of the volume fraction of a second phase in a multiphase sample by X-ray diffraction becomes more difficult if the diffracting planes have a preferred orientation. Lopata and Kula have described a method of treating this problem using complete pole figures for each of the phases. With some samples, it is not always possible or convenient to obtain data over the full hemisphere. Equations and an example are given which require X-ray data over a limited range of approximately 0 to 75 deg. This can be obtained by reflection without a specially cut sample or transmission data. A series of Legendre polynomials are fitted to data collected while spinning the sample about its normal. An extrapolation is made possible by introducing two conditions on the end points which must be satisfied if the extrapolation functions are to be valid.

Houska, C. R.↗

A high volume cost efficient production macrostructuring process

The paper presents an experimentally developed surface macro-structuring process suitable for high volume production of silicon solar cells. The process lends itself easily to automation for high throughput to meet low-cost solar array goals. The tetrahedron structure observed is 0.5 - 12 micron high. The surface has minimal pitting with virtually no or very few undeveloped areas across the surface. This process has been developed for (100) oriented as cut silicon. Chemi-etched, hydrophobic and lapped surfaces were successfully texturized. A cost analysis as per Samics is presented.

Chitre, S. R.↗

A method to estimate critical volumes

Methods for estimating the volume of the critical temperature used for the estimation of thermodynamic properties of substances are described. The possibility to estimate the critical temperature by using a combination of only eighteen atomic and structural contributions is shown. These contributions are listed and the critical temperature is given by a linear expression. By comparing the Vetere (1976) and Lydersen (1955) methods with the method discussed it is noted that while all three methods yield about the same average error (about 3%), the new method is superior in that it requires a smaller number of increments to fit data points.

Fedors, R. F.↗

Recent progress in finite-volume calculations for wing-fuselage combinations

Progress in the application of finite-volume methods to the calculation of transonic potential flows past general wing-body combinations is reviewed. Two different methods of generating boundary-conforming grids are investigated, and the results compared to provide an estimate of solution sensitivity to grid geometry. Both conservative and quasi-conservative difference schemes are used in one of the coordinate systems. Results show that the error introduced by the quasi-conservative formulation seems to be small, although a one-dimensional analysis suggests that schemes of this type do not necessarily produce mass-conserving shocks. Comparison of calculated results with experimental data for realistic fuselage geometries clearly shows the importance of modelling the effect of fuselage geometry upon the wing pressure distribution.

Caughey, D. A.↗

Effects of regional hemoconcentration during LBNP on plasma volume determinations

Blood samples were obtained from forearm vein or artery with indwelling cannula (1) before, (2) during the last min, and (3) about 2 min after lower body negative pressure (LBNP) in 16 experiments to determine whether plasma volume (PV) estimates were affected by regional hemoconcentration in the lower body. Total hemoglobin (THb) was estimated with the CO method prior to LBNP. Hemoglobin (Hb) and hematocrit (Hct) values from (2) gave only a 3% (87 ml) loss in PV due to LBNP, assuming no change in THb. However, Hb and Hct values from (3) showed an 11% loss in PV (313 ml). This 72% underestimation of PV loss with (2) must have resulted from the sequestration of blood and subsequent hemoconcentration in the lower body during LBNP. The effects of LBNP on PV should be estimated 1-3 min after exposure, after mixing but before extravascular fluid returns to the circulation.

Loeppky, J. A.↗

Large volume multiple-pass nuclear pumped laser

The paper describes research efforts at the Langley Research Center to study large volume, volumetric pumped laser systems and methods to extract lasing energy from these systems. Nuclear lasing has been achieved for a mixture of 800 torr He-3-Ar (1% Ar) with a peak thermal flux of 2.9 x 10 to the 16th n/sq cm-sec. Attention is given to the scaling of the multiple-pass box laser with increasing number of multiple passes and the scaling of laser output with path length.

Deyoung, R. J.↗

Large-volume multiple-path nuclear-pumped laser

Output of nuclear pumped laser is increased using mirrors, so multiple optical reflections enlarge lasing-mode volume. Design requires comparatively low thermal neutron flux, uses flux more efficiently. Flux for lasing approaches that available from steady-state reactor. Outputs over 100 watts have been reached.

Hohl, F.↗

The Apollo spacecraft: A chronology volume 4, 21 January 1966 - 13 July 1974

This final volume of the chronology is divided into three parts: (1) preparation for flight, the accident, and investigation; (2) recovery, spacecraft redefinition, and the first manned flight; and (3) man circles the moon, the Eagle lands, and manned space exploration. Congressional documents, official correspondence, government and contractor reports, memoranda, working papers, and minutes of meetings were used as primary sources. A relatively few entries are based on press releases and newspaper and magazine articles.

Ertel, I. D.↗

STS-1 operational flight profile. Volume 4: Onorbit profile-cycle 3.1.1

The orbital flight test (OFT) phase of the shuttle program consists of four orbital flights beginning in November 1980and continuing through 1981. The major purpose of the OFT program is to demonstrate and verify shuttle systems and flight capabilities by satisfying the OFT requirements, is presented. The onorbit portion of the operational flight profile (OFP) for the first Space Transportation System-1 (STS-1) flight is presented. This onorbit document (volume 4) is one in a series that, taken together, will define the STS-1 OFP. This OFP onorbit document represents a combination of the STS-1 ground rules and constraints and the initialization data. The STS-1 flight activities described reflect the trajectory, consumable, crew activity, and flight requirement baseline as of May 1, 1980. Flight plans for the ascent, onorbit, and descent phases of the test flight are presented.

Source record↗

DUMAND Summer Workshop, University of California, La Jolla, Calif., July 24-September 2, 1978, Proceedings. Volume 2 - UHE interactions, neutrino astronomy

The volume covers categories on inelastic neutrino scattering and the W-boson, and other ultra-high-energy processes, on pulsars, quasars and galactic nuclei, as well as other point sources and constants from gamma ray astronomy. Individual subjects include weak intermediate vector bosons and DUMAND, the Monte Carlo simulation of inelastic neutrino scattering in DUMAND, and Higgs boson production by very high-energy neutrinos. The observability of the neutrino flux from the inner region of the galactic disk, the diffuse fluxes of high-energy neutrinos, as well as the significance of gamma ray observations for neutrino astronomy are also among the topics covered.

Roberts, A.↗

The volume emissivity of type III radio bursts

The volume emissivity has been calculated for thirty-six type III solar radio bursts obtained from approximately 6.5 years of Imp 8 and ISEE 1 satellite data. Although the emissivities for these events vary over a large range, all the emissivities decrease rapidly with increasing heliocentric radial distance. The best fit power law for the emissivity, using the average power law index for all events analyzed, is J = J(0)R(-6.0), with J0 = 1.5 x 10 to the -24th W/cu m sr. This best fit emissivity is used to estimate the expected radial variation of the plasma oscillations responsible for the type III radio emissions.

Tokar, R. L.↗

Satellite Power Systems (SPS) laser studies. Volume 1: Laser environmental impact study

The environmental impact of space to Earth power transmission using space borne laser subsystems is emphasized. A laser system is defined, estimates of relevant efficiencies for laser power generation and atmospheric transmission are developed, and a comparison is made to a microwave system. Ancillary issues, such as laser beam spreading, safety and security, mass and volume estimates and technology growth are considered.

Beverly, R. E., III↗

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 6: Environmental analysis

The results of the analysis of the external environment of the FBI Fingerprint Identification Division are presented. Possible trends in the future environment of the Division that may have an effect on the work load were projected to determine if future work load will lie within the capability range of the proposed new system, AIDS 3. Two working models of the environment were developed, the internal and external model, and from these scenarios the projection of possible future work load volume and mixture was developed. Possible drivers of work load change were identified and assessed for upper and lower bounds of effects. Data used for the study were derived from historical information, analysis of the current situation and from interviews with various agencies who are users of or stakeholders in the present system.

Mulhall, B. D. L.↗

Coal gasification systems engineering and analysis. Volume 1: Executive summary

Feasibility analyses and systems engineering studies for a 20,000 tons per day medium Btu (MBG) coal gasification plant to be built by TVA in Northern Alabama were conducted. Major objectives were as follows: (1) provide design and cost data to support the selection of a gasifier technology and other major plant design parameters, (2) provide design and cost data to support alternate product evaluation, (3) prepare a technology development plan to address areas of high technical risk, and (4) develop schedules, PERT charts, and a work breakdown structure to aid in preliminary project planning. Volume one contains a summary of gasification system characterizations. Five gasification technologies were selected for evaluation: Koppers-Totzek, Texaco, Lurgi Dry Ash, Slagging Lurgi, and Babcock and Wilcox. A summary of the trade studies and cost sensitivity analysis is included.

Source record↗

Multistage variable probability forest volume inventory

An inventory scheme based on the use of computer processed LANDSAT MSS data was developed. Output from the inventory scheme provides an estimate of the standing net saw timber volume of a major timber species on a selected forested area of the Navajo Nation. Such estimates are based on the values of parameters currently used for scaled sawlog conversion to mill output. The multistage variable probability sampling appears capable of producing estimates which compare favorably with those produced using conventional techniques. In addition, the reduction in time, manpower, and overall costs lend it to numerous applications.

Anderson, J. E.↗