Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Effects of Solution Treatment on Microstructure Transformation, Tensile and Exfoliation Corrosion Properties of 7136 Aluminum Alloy

The effects of solution treatment on microstructure transformation and tensile properties of 7136 aluminum alloys were investigated by means of scanning electron microscopy, electron backscatter diffraction, differential scanning calorimeter, x-ray diffraction and tensile test, electrochemical evaluations, exfoliation corrosion tests, respectively. The results indicate that solution treatment had a significant effect on the microstructure transformation and tensile properties. Soluble constituents of 7136 aluminum alloys were more likely to form the η(MgZn{sub 2}) phase rather than the S(Al{sub 2}CuMg) phase. With increasing the solution temperature, the η phase was re-dissolved into the α(Al) matrix gradually. After solution treatment of 475 °C/1 h, the η phase was completely dissolved into the matrix, with insoluble Fe-rich phases remained. The dissolution of η phase would increase the strength and the corrosion resistance of the alloys. When continuing to increase the solution temperature, the recrystallized fraction increased obviously, resulting in the decrease in the strength and the corrosion resistance. Consequently, the strength and the corrosion resistance of the alloys increased firstly and then decreased with the increase in solution temperature. After solution treatment of 475 °C/1 h, the tensile strength and yield strength of the aged alloy reached their peaks, 738 and 715 MPa, respectively. The elongation of the alloy solution treated at 475 °C/1 h reached 11.2%, and its exfoliation corrosion rating got EB level. Furthermore, after the double-stage solution treatment of 450 °C/1 h + 475 °C/1 h, the recrystallized fraction decreased, resulting in a slight increase to 12.6% of the elongation, a slight increase in the corrosion resistance and a slight decrease in the strength.

36 MATERIALS SCIENCE↗

Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis

In this paper, superelastic behavior of nickel-titanium thin wires is characterized using the method of dynamic mechanical analysis. Nominal dynamic storage modulus E{sup ′} is measured as function of nominal strain and stress during isothermal superelastic tensile tests at three testing temperatures above the reverse martensitic transformation finish temperature. The method brings new information on deformation mechanisms compared to the consideration of only tensile stress–strain curves. It is shown that determination of the elastic moduli E, especially at high strain, requires to calculate the true storage modulus E{sub t}{sup ′}. Using E{sub t}{sup ′} and not E{sup ′}, elastic modulus of oriented martensite E{sub M} is determined equal to 73 GPa of the same order than the elastic modulus of austenite E{sub A} equal to 70 GPa. Two models are then proposed to simulate experimental storage moduli evolution during the tests. A first model explains the E{sup ′} evolution during stress plateau by the localization phenomenon; it leads to express E{sup ′} as function of the nominal strain. A second model describes the evolution of E{sub t}{sup ′} after the stress plateau as function of true stress and test temperature. This model permits to determine the Clausius–Clapeyron coefficient of the forward transformation.

36 MATERIALS SCIENCE↗

The Evolution of Deformation-Induced Carbides during Divorced Eutectoid Transformation in GCr15 Steels

A series of rolling experiments were carried out using GCr15 steel to investigate the effect of initial microstructure on the spheroidizing process, and especially the effect of deformation-induced carbides (DIC) on the divorced eutectoid transformation (DET). The results indicated that the existence of DIC was beneficial to the spheroidizing process, the optimal initial microstructure for DET was lamellar pearlite, and DIC precipitated at grain boundaries. The average thickness of the cementite lamella and the size of DIC decreased with a decrease in rolling temperature in the critical temperature region. When the specimen was rolled at 1053 K, a small amount of DIC of size ~ 1 μm precipitated at grain boundaries. In contrast, the amount of DIC was increased when the rolling temperature was decreased to 1023 K, whereas the size of DIC was reduced to ~ 0.5 μm. Interrupted quenching experiments indicated that DIC (M{sub 7}C{sub 3}) were transformed to M{sub 3}C during the process of partial austenitization, and the evolution of spheroidization was influenced by the variation in the initial microstructure. For the specimens rolled at 1023 K, only ~ 60 min was needed to achieve the dissolution of DIC, which was the minimum, and the total time needed to achieve spheroidization was reduced to ~ 90 min.

36 MATERIALS SCIENCE↗

Microstructural and Textural Evolutions during β → α/ω Transformation in Biomedical Ti-15Mo Alloy and Its Effects on Mechanical Performance

This study investigated the precipitation behaviors and mechanical performance of Ti-15Mo alloy subjected to different treatment conditions. The microstructures were analyzed via scanning electron microscopy and transmission electron microscopy. The tensile properties and resultant fracture surfaces were investigated to determine the relationship between the phase transformation and mechanical performance. The Ti-15Mo alloy had a notable elongation due to no observable precipitation during solution treatment plus quenching (STQ). A high ultimate tensile strength (UTS) was obtained with a considerable amount of ω precipitates transformed during air cooling after solution treatment (ST). The coarse precipitates and additional precipitation free zones in the Ti-15Mo alloy treated with furnace cooling (FC) after ST induced a decrease in UTS. Furthermore, the absence of a continuous grain boundary α phase resulted in a lower strength in the specimen annealed at 600 °C after hot rolling. The alloy iso-aged after STQ exhibited good tensile properties with a UTS of 920 MPa and an elongation of 15%. The texture and variant relationship of the precipitates was analyzed with x-ray diffraction and electron backscatter diffraction. The common variants of the β matrix influenced the nucleation of precipitates in the Ti-15Mo alloy annealed after hot rolling, and the precipitates showed an obvious {01-10}α main texture. The variant selection of α precipitates at the grain boundary was caused by the two adjacent β grains in the alloy treated by FC after ST.

36 MATERIALS SCIENCE↗

Modeling of Martensite Transformation in White Layer under Thermo-mechanical Coupling in Hard-Cutting Process

Martensite volume fraction determines the hardness and wear resistance of workpiece, predicting the martensite volume fraction of the white layer is of great significance for improving the surface quality of the workpiece. Accordingly, a theoretical model on the martensite volume fraction was developed in combination with the martensite transformation temperature model and the hard-cutting FE model. A finite element (FE) model of the hard-cutting was established to obtain the stress distribution of the workpieces. A calculation model of martensite phase transformation temperature M{sub S} under the influence of the cooling rate and stress was deduced based on the change of Gibbs free energy. A theoretical model of martensite volume fraction f{sub M} of the white layer was developed based on the M{sub S} and the FE simulations. The f{sub M} calculated by the theoretical model is in accordance with the experimental result. The effects of cutting speed, feed rate, flank wear and tool rake angle on the f{sub M} in the white layers were predicted and analyzed; the results show that the f{sub M} decreases first and then increases with the cutting speed, decreases with the feed rate and the flank wear, and increases with the tool rake angle.

36 MATERIALS SCIENCE↗

Phase transformations in steels: Processing, microstructure, and performance

In this study, contemporary steel research is revealing new processing avenues to tailor microstructure and properties that, until recently, were only imaginable. Much of the technological versatility facilitating this development is provided by the understanding and utilization of the complex phase transformation sequences available in ferrous alloys. Today we have the opportunity to explore the diverse phenomena displayed by steels with specialized analytical and experimental tools. Advances in multi-scale characterization techniques provide a fresh perspective into microstructural relationships at the macro- and micro-scale, enabling a fundamental understanding of the role of phase transformations during processing and subsequent deformation.

36 MATERIALS SCIENCE↗

Fast Fourier Transform for multivariate aggregate claims

The Fast Fourier Transform provides an alternative approximate method to evaluate the distribution of aggregate losses in insurance and finance. The efficiency of this method has already been proved for univariate and bivariate insurance models; therefore, in this paper, we extend it to a multivariate setting by considering its application to a particular model that includes losses of different types and dependency between them. Since the Fourier transform method works with truncated claims distributions, it can generate aliasing errors by wrapping around the probability mass that lies at the truncation point below this point. To eliminate this problem, we also discuss a suitable change of measure called exponential tilting that forces the tail of the distribution to decrease at exponential rate. Other possible errors are also discussed. We also illustrate the method on several numerical examples.

97 MATHEMATICS AND COMPUTING↗

Decoding anomalous grain growth at room temperature during pressure-induced phase transformations

Significant grain growth is observed during the high-pressure phase transformations (PTs) at room temperature in various materials. The main focus here is grain growth from a few hundred nanometers to 10 μm within an hour during α → ω PT in Zr. No existing theory explains this phenomenon since without PT, Zr nanocrystals do not grow at room temperature even for up to 10 years. Here, in this study, a multistep mechanism for the grain growth during α → ω PT in Zr is suggested. Phase interfaces (PI) and grain boundaries (GBs) coincide and move together as a combined PI-GBs under the action of the combined thermodynamic driving force. Such a combined motion changes the diffusional grain growth mechanism to the transformational one and the martensitic mechanism of PT to a reconstructive one via an intermediate disordered phase. The primary condition is that the GB energy of the ω phase is smaller than that of the α phase, which promotes the nucleation of ω-Zr and is consistent with the absence of the reverse PT and reduction in the PT pressure with reducing grain size. Several intermediate steps for such motion are suggested and justified kinetically. Nonhydrostatic stresses due to volume reduction in the growing ω grain promote continuous growth of the existing ω grain instead of a new nucleation at other GBs. In situ synchrotron Laue diffraction experiments confirm the main predictions of the theory. The suggested mechanism provides a new insight into synergistic interaction between PTs and microstructure evolution.

anomalous grain growth during phase transformation↗

Phase transformation dynamics guided alloy development for additive manufacturing

Fusion-based additive manufacturing technologies enable the fabrication of geometrically and compositionally complex parts unachievable by conventional manufacturing methods. However, the non-uniform and far-from-equilibrium heating/cooling conditions pose a significant challenge to consistently obtaining desirable phases in the as-printed parts. Here, in this study, we report a martensite stainless steel development guided by phase transformation dynamics revealed by in-situ high-speed, high-energy, high-resolution X-ray diffraction. This developed stainless steel consistently forms desired fully martensitic structure across a wide range of cooling rates (10 2 –10 7 °C/s), which enables direct printing of parts with fully martensitic structure. The as-printed material exhibits a yield strength of 1157 ± 23 MPa, comparable to its wrought counterpart after precipitation-hardening heat-treatment. The as-printed property is attributed to the fully martensitic structure and the fine precipitates formed during the intrinsic heat treatment in additive manufacturing. The phase transformation dynamics guided alloy development strategy demonstrated here opens the path for developing reliable, high-performance alloys specific for additive manufacturing.

17–4 PH stainless steel↗

Unitary transformations purely based on geometric phases of two spins with Ising interaction in a rotating magnetic field

We consider how to obtain a nontrivial two-qubit unitary transformation purely based on geometric phases of two spin-1/2 's with Ising-like interaction in a magnetic field with a static z-component and a rotating xy-component. This is an interesting problem both for the purpose of measuring the geometric phases and in quantum computing applications. In previous approach, coupling of one of the qubit with the rotating component of field is ignored. By considering the exact two-spin geometric phases, we find that a nontrivial two-spin unitary transformation purely based on Berry phases can be obtained by using two consecutive cycles with opposite directions of the magnetic field and opposite signs of the interaction constant. In the nonadiabatic case, starting with a certain initial state, a cycle in the projected space of rays and thus Aharonov-Anandan phase can be achieved. The two-cycle scheme cancels the total phases, hence any unknown initial state evolves back to itself without a phase factor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Langevin equation with multiplicative white noise: Transformation of diffusion processes into the Wiener process in different prescriptions

A Langevin equation with multiplicative white noise and its corresponding Fokker-Planck equation are considered in this work. From the Fokker-Planck equation a transformation into the Wiener process is provided for different orders of prescription in discretization rule for the stochastic integrals. A few applications are also discussed. - Highlights: Black-Right-Pointing-Pointer Fokker-Planck equation corresponding to the Langevin equation with mul- tiplicative white noise is presented. Black-Right-Pointing-Pointer Transformation of diffusion processes into the Wiener process in different prescriptions is provided. Black-Right-Pointing-Pointer The prescription parameter is associated with the growth rate for a Gompertz-type model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

N-fold Darboux transformation and double-Wronskian-typed solitonic structures for a variable-coefficient modified Kortweg-de Vries equation

Under investigation in this paper is a variable-coefficient modified Kortweg-de Vries (vc-mKdV) model describing certain situations from the fluid mechanics, ocean dynamics and plasma physics. N-fold Darboux transformation (DT) of a variable-coefficient Ablowitz-Kaup-Newell-Segur spectral problem is constructed via a gauge transformation. Multi-solitonic solutions in terms of the double Wronskian for the vc-mKdV model are derived by the reduction of the N-fold DT. Three types of the solitonic interactions are discussed through figures: (1) Overtaking collision; (2) Head-on collision; (3) Parallel solitons. Nonlinear, dispersive and dissipative terms have the effects on the velocities of the solitonic waves while the amplitudes of the waves depend on the perturbation term. - Highlights: Black-Right-Pointing-Pointer N-fold DT is firstly applied to a vc-AKNS spectral problem. Black-Right-Pointing-Pointer Seeking a double Wronskian solution is changed into solving two systems. Black-Right-Pointing-Pointer Effects of the variable coefficients on the multi-solitonic waves are discussed in detail. Black-Right-Pointing-Pointer This work solves the problem from Yi Zhang [Ann. Phys. 323 (2008) 3059].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Darboux transformation of the Drinfeld–Sokolov–Satsuma–Hirota system and exact solutions

A Darboux transformation for the Drinfeld–Sokolov–Satsuma–Hirota system of coupled equations is constructed with the aid of gauge transformations between the Lax pairs. As an application, several types of solutions of the Drinfeld–Sokolov–Satsuma–Hirota system are obtained, including soliton solutions, periodic solutions, rational solutions and others.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deformation behavior and phase transformation of nanotwinned Al/Ti multilayers

We report nanotwinned Al/Ti multilayers have exhibited size-dependent microstructure evolution and high strength. However, their deformation mechanisms are less well understood. In this work, we investigated the deformation mechanisms of nanotwinned Al/Ti multilayers with FCC/HCP layer interfaces by using in situ micropillar compression tests. Nanotwinned Al/Ti multilayers exhibit compressive strength up to 2.4 GPa and good work hardening capability. Post-compression TEM analyses reveal high-density stacking faults and the HCP-to-FCC phase transformations in Ti. Molecular dynamics simulations elucidate the mechanisms of deformation induced phase transformation in Ti and the influence of collective movement of partial dislocations on the deformability of Al/Ti multilayers.

36 MATERIALS SCIENCE↗

Mos1 transposon-based transformation of fish cell lines using baculoviral vectors

Highlights: •The baculovirus vector infiltrates the cells of economic important fishes. •Drosophila Mos1 transposase expressed in fish cells maintains its ability to localize to the nucleus. •The baculoviral vector carrying Mos1 is a useful tool to stably transform fish cells. -- Abstract: Drosophila Mos1 belongs to the mariner family of transposons, which are one of the most ubiquitous transposons among eukaryotes. We first determined nuclear transportation of the Drosophila Mos1-EGFP fusion protein in fish cell lines because it is required for a function of transposons. We next constructed recombinant baculoviral vectors harboring the Drosophila Mos1 transposon or marker genes located between Mos1 inverted repeats. The infectivity of the recombinant virus to fish cells was assessed by monitoring the expression of a fluorescent protein encoded in the viral genome. We detected transgene expression in CHSE-214, HINAE, and EPC cells, but not in GF or RTG-2 cells. In the co-infection assay of the Mos1-expressing virus and reporter gene-expressing virus, we successfully transformed CHSE-214 and HINAE cells. These results suggest that the combination of a baculovirus and Mos1 transposable element may be a tool for transgenesis in fish cells.

60 APPLIED LIFE SCIENCES↗

Merlin negative regulation by miR-146a promotes cell transformation

Inactivation of the tumor suppressor Merlin, by deleterious mutations or by protein degradation via sustained growth factor receptor signaling-mediated mechanisms, results in cell transformation and tumor development. In addition to these mechanisms, here we show that, miRNA-dependent negative regulation of Merlin protein levels also promotes cell transformation. We provide experimental evidences showing that miR-146a negatively regulates Merlin protein levels through its interaction with an evolutionary conserved sequence in the 3´ untranslated region of the NF2 mRNA. Merlin downregulation by miR-146a in A549 lung epithelial cells resulted in enhanced cell proliferation, migration and tissue invasion. Accordingly, stable miR-146a-transfectant cells formed tumors with metastatic capacity in vivo. Together our results uncover miRNAs as yet another negative mechanism controlling Merlin tumor suppressor functions.

60 APPLIED LIFE SCIENCES↗

Mitigation of spatial nonstationarity with vision transformers

Spatial nonstationarity, the location variance of features’ statistical distributions, is ubiquitous in many natural settings. For example, in geological reservoirs rock matrix porosity varies vertically due to geomechanical compaction trends, in mineral deposits grades vary due to sedimentation and concentration processes, in hydrology rainfall varies due to the atmosphere and topography interactions, and in metallurgy crystalline structures vary due to differential cooling. Conventional geostatistical modeling workflows rely on the assumption of stationarity to be able to model spatial features for geostatistical inference. Nevertheless, this is often not a realistic assumption when dealing with nonstationary spatial data and this has motivated a variety of nonstationary spatial modeling workflows such as trend and residual decomposition, cosimulation with secondary features, and spatial segmentation and independent modeling over stationary subdomains. The advent of deep learning technologies has enabled new workflows for modeling spatial relationships. However, there is a paucity of demonstrated best practice and general guidance on mitigation of spatial nonstationarity with deep learning in the geospatial context. We demonstrate the impact of two common types of geostatistical spatial nonstationarity on deep learning model prediction performance and propose the mitigation of such impacts using self-attention (vision transformer) models. We demonstrate the utility of vision transformers for the mitigation of nonstationarity with relative errors as low as 10%, exceeding the performance of alternative deep learning methods such as convolutional neural networks. We establish best practice by demonstrating the ability of self-attention networks for modeling large-scale spatial relationships in the presence of commonly observed geospatial nonstationarity.

58 GEOSCIENCES↗

Cellular mRNA triggers structural transformation of Ebola virus matrix protein VP40 to its essential regulatory form

The Ebola virus matrix protein VP40 forms distinct structures linked to distinct functions in the virus life cycle. Dimeric VP40 is a structural protein associated with virus assembly, while octameric, ring-shaped VP40 is associated with transcriptional control. In this study, we show that suitable nucleic acid is sufficient to trigger a dynamic transformation of VP40 dimer into the octameric ring. Deep sequencing reveals a binding preference of the VP40 ring for the 3' untranslated region of cellular mRNA and a guanine- and adenine-rich binding motif. Complementary analyses of the nucleic-acid-induced VP40 ring by native mass spectrometry, electron microscopy, and X-ray crystal structures at 1.8 and 1.4 Å resolution reveal the stoichiometry of RNA binding, as well as an interface involving a key guanine nucleotide. The host factor-induced structural transformation of protein structure in response to specific RNA triggers in the Ebola virus life cycle presents unique opportunities for therapeutic inhibition.

3′ UTR↗