Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “total scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Quasi-Elastic Scattering in MINERvA

Determination of the quasi‐elastic scattering cross‐section over a broad range of neutrino energies, nuclear targets and Q2 is a primary goal of the MINERvA experiment. We present preliminary comparisons of data and simulation in a sample rich in ν̄μp→μ+n events from approximately one eighth of the total ν̄ events collected by MINERvA to date. We discuss future plans for quasi‐elastic analyses in MINERvA.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-resolved and multiple-angle Thomson scattering on gas-puff Z-Pinch plasmas at pinch time

A 526.5 nm Thomson scattering diagnostic laser enables probing of the plasma conditions of neon gas-puff z-pinch implosions with temporal resolution. Splitting the laser into two 2.5 J pulses, both 2.3 ns in duration and separated by 4 ns, allows observation of sub-nanosecond time-resolved spectra for a total time of 7 ns. Collection optics were set at 90° and 30° to the laser, observing the same on-axis scattering volume with a radial extent of 0.4 mm. The spectra from both angles were collected by using the same streak camera, using a coupling system that allowed us to obtain temporal, spectral, and angular resolution in the same image. By comparing the ion-acoustic spectra from the two angles, we determined electron temperature and a range of possible electron densities. Measurements made in the 1-3 ns period before pinch time show best fit (determined by a least-squares method) electron densities of around 2 × 10 19 cm -3 , increasing to 1.5 × 10 20 cm -3 in the 3 ns following the start of the x-ray burst (t = 0 ns) from the pinch. The electron temperature increases from 300 eV to 500 eV at t = 0 ns before decreasing to below 300 eV after pinch time. With the present parameters (probe beam, collection angles, and electron temperature and density), this diagnostic method is too insensitive to electron density to provide more than a constraint on that parameter. Plasma regimes in which this technique could determine electron density with some precision are calculated.

47 OTHER INSTRUMENTATION↗

K{sup -}p{yields}{sigma}{sup 0}{pi}{sup 0} reaction at low energies in a chiral quark model

A chiral quark-model approach is extended to the study of the KN scattering at low energies. The process K{sup -}p{yields}{sigma}{sup 0}{pi}{sup 0} at P{sub K} < or approx. 800 MeV/c (i.e., the center-of-mass energy W < or approx. 1.7 GeV) is investigated. This approach successfully describes the differential cross sections and total cross section with the roles of the low-lying {lambda} resonances in n=1 shells clarified. The {lambda}(1405)S{sub 01} dominates the reactions over the energy region considered here. Around P{sub K}{approx_equal}400 MeV/c, the {lambda}(1520)D{sub 03} is responsible for a strong resonant peak in the cross section. The {lambda}(1670)S{sub 01} has obvious contributions around P{sub K}=750 MeV/c, while the contribution of {lambda}(1690)D{sub 03} is less important in this energy region. The nonresonant background contributions, i.e., u channel and t channel, also play important roles in the explanation of the angular distributions due to amplitude interferences. The u channel turns out to have significant destructive interferences with the {lambda}(1405)S{sub 01} at the forward angles. In contrast, the t-channel K* exchange has a constructive interference at the forward angles, whereas it suppresses the cross sections slightly at the backward angles. In the t channel, the K* exchange is more dominant than the {kappa} exchange. Our analysis suggests that configuration mixing exists within the {lambda}(1405)S{sub 01} and {lambda}(1670)S{sub 01} and results in admixtures of the [70,{sup 2}1,1/2] and [70,{sup 2}8,1/2] configurations. The {lambda}(1405)S{sub 01} is dominated by [70,{sup 2}1,1/2], and {lambda}(1670)S{sub 01} by [70,{sup 2}8,1/2]. The mixing angle is also determined. The {lambda}(1520)D{sub 03} and {lambda}(1690)D{sub 03} are assigned as [70,{sup 2}1,3/2] and [70,{sup 2}8,3/2], respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

(abstract) Sensitivity to Forest Biomass Based on Analysis of Scattering Mechanism

The estimation of forest biomass on a global scale is an important input to global climate and carbon cycle models. Remote sensing using synthetic aperture radar offers a means to obtain such a data set. Although it has been clear for some time that radar signals penetrate forest canopies, only recently has it been demonstrated that these signals are indeed sensitive to biomass. Inasmuch as the majority of a forest's biomass is in the trunks, it is important that the radar is sensing the trunk biomass as opposed to the branch or leaf biomass. In this study we use polarimetric AIRSAR P- and L-band data from a variety of forests to determine if the radar penetrates to the trunk by examining the scattering mechanism as determined using van Zyl's scattering interaction model, and the levels at which saturation occurs with respect to sensitivity of radar backscatter to total biomass. In particular, the added sensitivity of P-band relative to L-band is addressed. Results using data from the Duke Forest in North Carolina, the Bonanza Creek Experimental Forest in Alaska, Shasta Forest in California, the Black Forest in Germany, the temporate/boreal transition forests in northern Michigan, and coastal forests along the Oregon Transect will be presented.

forest canopy biomass radar scattering mechanism↗

Low-energy-threshold analysis of the Phase I and Phase II data sets of the Sudbury Neutrino Observatory

Results are reported from a joint analysis of Phase I and Phase II data from the Sudbury Neutrino Observatory. The effective electron kinetic energy threshold used is T{sub eff}=3.5 MeV, the lowest analysis threshold yet achieved with water Cherenkov detector data. In units of 10{sup 6} cm{sup -2} s{sup -1}, the total flux of active-flavor neutrinos from {sup 8}B decay in the Sun measured using the neutral current (NC) reaction of neutrinos on deuterons, with no constraint on the {sup 8}B neutrino energy spectrum, is found to be PHI{sub NC}=5.140{sub -0.158}{sup +0.160}(stat){sub -0.117}{sup +0.132}(syst). These uncertainties are more than a factor of 2 smaller than previously published results. Also presented are the spectra of recoil electrons from the charged current reaction of neutrinos on deuterons and the elastic scattering of electrons. A fit to the Sudbury Neutrino Observatory data in which the free parameters directly describe the total {sup 8}B neutrino flux and the energy-dependent nu{sub e} survival probability provides a measure of the total {sup 8}B neutrino flux PHI{sub {sup 8}{sub B}}=5.046{sub -0.152}{sup +0.159}(stat){sub -0.123}{sup +0.107}(syst). Combining these new results with results of all other solar experiments and the KamLAND reactor experiment yields best-fit values of the mixing parameters of theta{sub 12}=34.06{sub -0.84}{sup +1.16} degrees and DELTAm{sub 21}{sup 2}=7.59{sub -0.21}{sup +0.20}x10{sup -5} eV{sup 2}. The global value of PHI{sup 8}{sub B} is extracted to a precision of {sub -2.95}{sup +2.38}%. In a three-flavor analysis the best fit value of sin{sup 2}theta{sub 13} is 2.00{sub -1.63}{sup +2.09}x10{sup -2}. This implies an upper bound of sin{sup 2}theta{sub 13}<0.057 (95% C.L.).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonance lines in dusty gaseous nebulae

Under the assumption that dust is either homogeneously mixed throughout or confined to either 1/2 or 1/4 of the space in question, the effect of absorption and scattering by dust grains on resonance lines that were formed in static gaseous nebulae with plane-parallel stratification is studied and a comparison is made between the total emergent flux in the line from the dust-filled nebula and the emergent flux from a dust-free medium. Many line optical thickness values, and several combinations of the opacity ratio of dust and gas, dust albedo, and collision parameter, are compared. A novel method is used to analytically solve the transfer equation for a spectral line in the presence of scattering and absorbing dust. It is noted that dust distribution can have large effects on the value of the total emergent flux.

Wehrse, R.↗

Analytical representation for pp elastic scattering at 7 TeV

A precise analysis is performed of the recent pp elastic data at 7 TeV in terms of its real and imaginary amplitudes, that are fully disentangled, consistently with dispersion relations for amplitudes and for slopes. Real and imaginary slopes B{sub R} and B{sub I}, treated as independent quantities, influence the whole t-range and the determination of the total cross section {sigma}. The treatment includes extension to the universal perturbative tail at large |t|. Consistency is obtained in the values of {sigma}, ratio {rho}, B{sub R} and B{sub I} determined in forward and full-t approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fitting a three-component scattering model to polarimetric SAR data

A new technique for fitting a three-component scattering mechanism model to the polarimetric synthetic aperture radar (SAR) data itself, without utilizing any ground truth measurements, is presented. The three scattering mechanism components included in the model are volume scatter from randomly oriented dipoles, first-order Bragg surface scatter and a dihedral scattering mechanism for two surfaces with different dielectric constants. The model fit yields an estimate of the contribution to the total backscatter of each of the three components. The backscatter contributions can also be compared to give the relative percentage weight of each. The model fit has an equal number of input parameters (the polarimetric radar backscatter measurements) and output parameters (the backscatter parameters describing them). The model can be applied to entire images or to small areas within an image to give a first-order estimate of the relevant scattering mechanisms. The model was applied to many C-, L- and P-band Airborne SAR (AIRSAR) images of different types of terrain. Results were presented at the workshop.

Freeman, A.↗

The effect of residual gas scattering on Ga ion beam patterning of graphene

The patterning of graphene by a 30 kV Ga{sup +} focused ion beam (FIB) is studied by in-situ and ex-situ Raman spectroscopy. It is found that the graphene surrounding the patterned target area can be damaged at remarkably large distances of more than 10 μm. We show that scattering of the Ga ions in the residual gas of the vacuum system is the main cause of the large range of lateral damage, as the size and shape of the tail of the ion beam were strongly dependent on the system background pressure. The range of the damage was therefore greatly reduced by working at low pressures and limiting the total amount of ions used. This makes FIB patterning a feasible alternative to electron beam lithography as long as residual gas scattering is taken into account.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Long-term Record of Saharan Dust Aerosol Properties from TOMS Observations: Optical Depth and Single Scattering Albedo

The interaction between the strong Rayleigh scattering in the near UV spectral region (330-380 nm) and the processes of aerosol absorption and scattering, produce a clear spectral signal in the upwelling radiance at the top of the atmosphere. This interaction is the basis of the TOMS (Total Ozone Mapping Spectrometer) aerosol retrieval technique that can be used for their characterization and to differentiate non-absorbing sulfates from strongly UV-absorbing aerosols such as mineral dust. For absorbing aerosols, the characterization is in terms of the optical depth and single scattering albedo with assumptions about the aerosol plume height. The results for non-absorbing aerosols are not dependent on plume height. Although iron compounds represent only between 5% to 8% of desert dust aerosol mass, hematite (Fe2O3) accounts for most of the near UV absorption. Because of the large ultraviolet absorption characteristic of hematite, the near UV method of aerosol sensing is especially suited for the detection and characterization of desert dust aerosols. Using the combined record of near UV measurements by the Nimbus7 (1978-1992) and Earth Probe (1996-present) TOMS instruments, a global longterm climatology of near UV optical depth and single scattering albedo has been produced. The multi-year long record of mineral aerosol properties over the area of influence of the Saharan desert, will be discussed.

Torres, Omar↗

SU-F-P-55: Testicular Scatter Dose Determination During Prostate SBRT with and Without Pelvic Lymph Nodes

Purpose: The elective irradiation of pelvis lymph node for prostate cancer is still controversial. Including pelvic lymph node as part of the planning target volume could increase the testicular scatter dose, which could have a clinical impact. The objective of this work was to measure testicular scatter dose for prostate SBRT treatment with and without pelvic lymph nodes using TLD dosimetry. Methods: A 6MV beam (1000UM/min) produce by a Novalis TX (BrainLAB-VARIAN) equipped HDMLC was used. Treatment plan were done using iPlan v4.5.3 (BrainLAB) treatment planning system with sliding windows IMRT technique. Prostate SBRT plan (PLAN-1) uses 9 beams with a dose prescription (D95%) of 4000cGy in 5 fractions. Prostate with lymph nodes SBRT plan (PLAN-2) uses 11 beams with a dose prescription (D95%) of 4000cGy to the prostate and 2500cGy to the lymph node in 5 fractions. An anthropomorphic pelvic phantom with a testicular volume was used. Phantom was positioned using ExacTrac IGRT system. Phosphor TLDs LiF:Mg, Ti (TLD700 Harshaw) were positioned in the anterior, posterior and inferior portion of the testicle. Two set of TLD measurements was done for each treatment plan. TLD in vivo dosimetry was done in one patient for each treatment plan. Results: The average phantom scatter doses per fraction for the PLAN-1 were 10.9±1cGy (anterior), 7.8±1cGy (inferior) and 10.7±1cGy (posterior) which represent an average total dose of 48±1cGy (1.2% of prostate dose prescription). The doses for PLAN-2 plan were 17.7±1cGy (anterior), 11±1cGy (inferior) and 13.3±1cGy (posterior) which represent an average total dose of 70.1±1cGy (1.8% of prostate dose prescription). The average dose for in vivo patient dosimetry was 60±1cGy for PLAN-1 and 85±1cGy for PLAN-2. Conclusion: Phantom and in vivo dosimetry shows that the pelvic lymph node irradiation with SBRT slightly increases the testicular scatter dose, which could have a clinical impact.

60 APPLIED LIFE SCIENCES↗

Evidence of a coupled electron-phonon liquid in NbGe 2

Whereas electron-phonon scattering relaxes the electron’s momentum in metals, a perpetual exchange of momentum between phonons and electrons may conserve total momentum and lead to a coupled electron-phonon liquid. Such a phase of matter could be a platform for observing electron hydrodynamics. Here we present evidence of an electron-phonon liquid in the transition metal ditetrelide, NbGe 2 , from three different experiments. First, quantum oscillations reveal an enhanced quasiparticle mass, which is unexpected in NbGe 2 with weak electron-electron correlations, hence pointing at electron-phonon interactions. Second, resistivity measurements exhibit a discrepancy between the experimental data and standard Fermi liquid calculations. Third, Raman scattering shows anomalous temperature dependences of the phonon linewidths that fit an empirical model based on phonon-electron coupling. We discuss structural factors, such as chiral symmetry, short metallic bonds, and a low-symmetry coordination environment as potential design principles for materials with coupled electron-phonon liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

braggedgemodeling

braggedgemodeling (bem) is an open-source Python package for modeling neutron Bragg-edge imaging. It computes the wavelength-dependent total neutron cross-section of a material (coherent and incoherent elastic, coherent and incoherent inelastic scattering, and absorption) from its crystal structure, and implements the March-Dollase texture model and the Jorgensen peak profile, supporting quantitative analysis of energy-resolved neutron imaging data (phase, stress/strain, and texture). Published in the Journal of Open Source Software (2018).

Lin, Jiao [Oak Ridge National Laboratory (ORNL), O↗

HerMES: THE FAR-INFRARED EMISSION FROM DUST-OBSCURED GALAXIES

Dust-obscured galaxies (DOGs) are an ultraviolet-faint, infrared-bright galaxy population that reside at z ∼ 2 and are believed to be in a phase of dusty star-forming and active galactic nucleus (AGN) activity. We present far-infrared (far-IR) observations of a complete sample of DOGs in the 2 deg{sup 2} of the Cosmic Evolution Survey. The 3077 DOGs have (z) = 1.9 ± 0.3 and are selected from 24 μm and r {sup +} observations using a color cut of r {sup +} – [24] ≥ 7.5 (AB mag) and S{sub 24} ≥ 100 μJy. Based on the near-IR spectral energy distributions, 47% are bump DOGs (star formation dominated) and 10% are power-law DOGs (AGN-dominated). We use SPIRE far-IR photometry from the Herschel Multi-tiered Extragalactic Survey to calculate the IR luminosity and characteristic dust temperature for the 1572 (51%) DOGs that are detected at 250 μm (≥3σ). For the remaining 1505 (49%) that are undetected, we perform a median stacking analysis to probe fainter luminosities. Herschel-detected and undetected DOGs have average luminosities of (2.8 ± 0.4) × 10{sup 12} L{sub ☉} and (0.77 ± 0.08) × 10{sup 12} L{sub ☉}, and dust temperatures of (33 ± 7) K and (37 ± 5) K, respectively. The IR luminosity function for DOGs with S{sub 24} ≥ 100 μJy is calculated, using far-IR observations and stacking. DOGs contribute 10%-30% to the total star formation rate (SFR) density of the universe at z = 1.5-2.5, dominated by 250 μm detected and bump DOGs. For comparison, DOGs contribute 30% to the SFR density for all z = 1.5-2.5 galaxies with S{sub 24} ≥ 100 μJy. DOGs have a large scatter about the star formation main sequence and their specific SFRs show that the observed phase of star formation could be responsible for their total observed stellar mass at z ∼ 2.

79 ASTRONOMY AND ASTROPHYSICS↗

WE-AB-207A-09: Optimization of the Design of a Moving Blocker for Cone-Beam CT Scatter Correction: Experimental Evaluation

Purpose: A moving blocker based strategy has shown promising results for scatter correction in cone-beam computed tomography (CBCT). Different geometry designs and moving speeds of the blocker affect its performance in image reconstruction accuracy. The goal of this work is to optimize the geometric design and moving speed of the moving blocker system through experimental evaluations. Methods: An Elekta Synergy XVI system and an anthropomorphic pelvis phantom CIRS 801-P were used for our experiment. A blocker consisting of lead strips was inserted between the x-ray source and the phantom moving back and forth along rotation axis to measure the scatter signal. Accoriding to our Monte Carlo simulation results, three blockers were used, which have the same lead strip width 3.2mm and different gap between neighboring lead strips, 3.2, 6.4 and 9.6mm. For each blocker, three moving speeds were evaluated, 10, 20 and 30 pixels per projection (on the detector plane). Scatter signal in the unblocked region was estimated by cubic B-spline based interpolation from the blocked region. CBCT image was reconstructed by a total variation (TV) based algebraic iterative reconstruction (ART) algorithm from the partially blocked projection data. Reconstruction accuracy in each condition is quantified as CT number error of region of interest (ROI) by comparing to a CBCT reconstructed image from analytically simulated unblocked and scatter free projection data. Results: Highest reconstruction accuracy is achieved when the blocker width is 3.2 mm, the gap between neighboring lead strips is 9.6 mm and the moving speed is 20 pixels per projection. RMSE of the CT number of ROIs can be reduced from 436 to 27. Conclusions: Image reconstruction accuracy is greatly affected by the geometry design of the blocker. The moving speed does not have a very strong effect on reconstruction result if it is over 20 pixels per projection.

60 APPLIED LIFE SCIENCES↗

Two- and three-meson scattering amplitudes with physical quark masses from lattice QCD

We study systems of two and three mesons composed of pions and kaons at maximal isospin using four CLS ensembles with 𝑎 ≈ 0.063 fm, including one with approximately physical quark masses. Using the stochastic Laplacian-Heaviside method, we determine the energy spectrum of these systems including many levels in different momentum frames and irreducible representations. Using the relativistic two- and three-body finite-volume formalism, we constrain the two- and three-meson K matrices, including not only the leading 𝑠 wave, but also 𝑝 and 𝑑 waves. By solving the three-body integral equations, we determine, for the first time, the physical-point scattering amplitudes for 3⁢𝜋 + , 3⁢𝐾 + , 𝜋 + ⁢𝜋 + ⁢𝐾 + , and 𝐾 + ⁢𝐾 + ⁢𝜋 + systems. These are determined for total angular momentum 𝐽 𝑃 = 0 − , 1 + , and 2 − . We also obtain accurate results for 2⁢𝜋 + , 𝜋 + ⁢𝐾 + , and 2⁢𝐾 + phase shifts. We compare our results to chiral perturbation theory and to phenomenological fits.

FOS: Physical sciences↗

Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray

Besides the intrinsic low heat transfer capability of material, the thermal insulation property of thermal barrier coatings (TBCs) also relies on their microstructures. For better understanding the relationship between process parameters, porous architecture, and thermal properties of coatings, YSZ coatings were firstly manufactured by suspension plasma spray (SPS). Afterwards their total porosities were characterized by using the technique of X-ray transmission, the nano/submicro pores in those coatings were detected with Ultra-Small Angle X-ray Scattering (USAXS), and the thermal properties of coatings were measured using the laser flash method. The results indicated that: i) the porous architecture of SPS coatings can be tailored by adapting process parameters. ii) increasing total porosity is an effective means for reducing the heat transfer capability of SPS coatings. iii) nano/submicro pores have higher influence sensitivity on thermal properties than that of larger pores. Increasing the content of nano-submicro pores is therefore more effective for improving the thermal insulation property of SPS coatings. The potential of SPS technique for fabricating TBCs was discussed as well.

36 MATERIALS SCIENCE↗