Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

External charge compensation in etched gallium nitride measured by x-ray photoelectron spectroscopy

Electronic states at GaN surfaces and at regrowth and heteroepitaxy interfaces inhibit electronic device performance. Understanding electronic state configuration at the GaN surface is, therefore, crucial for the development of GaN-based devices, which are currently of considerable interest in power electronic applications. GaN and other wurtzite III-nitrides possess large spontaneous polarization along the c-axis, producing a bound sheet charge at the surface, which affects the electronic state configuration through the formation of internal and external compensation charges. Defects induced by conventional plasma-based dry etching methods may inhibit the internal screening of this bound charge and thus increase the concentration of external charged states. The surface band bending of n-type Ga-face GaN (0001) was measured with x-ray photoelectron spectroscopy after inductively coupled plasma etching to investigate the impact of dry etching on external charge compensation. GaN samples were etched using inductively coupled plasma with varying rf power and a novel plasma-enhanced atomic layer etching method using an oxidation, fluorination, and ligand-exchange mechanism. The band bending varied from 0.0 to 0.8 ± 0.1 eV for the samples measured.

Hatch, Kevin A. (ORCID:0000000283118623)↗

pH-Driven Restructuring of Hydration Layers and Cation Adsorption at the Alumina–Water Interface

Oxide−water interfaces underpin ion separations, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. However, the molecular-scale links between pHdependent surface protonation, hydration-layer structure, and counterion adsorption remain poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)−water interface in 10 mM Rb + over pH 3−12. CTR measurements reveal two distinct adsorbed water layers at ∼2.2 and ∼3.5 Å above the surface. Each water layer shifts toward the substrate at transition pHs near 6.5 and 10.6, respectively, reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb + coverage and a decrease in mean adsorption height from ∼3.5 to ∼2.7 Å with increasing pH, indicating enhanced counterion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., the potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥ 3.5. The negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb + coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid−base chemistry to ion binding distances at an oxide−water interface.

Adsorption↗

Effects of high CO2 levels on surface temperature and atmospheric oxidation state of the early earth

One-dimensional radiative and photochemical models are used to determine how much CO2 must have been present to maintain a temperate early climate and to examine the consequences that are implied for the controls on atmospheric oxidation state. It is shown that CO2 concentrations of the order of 1000 PAL are required to keep the average surface temperature close to the present value, if albedo changes and heating by reduced greenhouse gases were relatively unimportant. The oxidation state of such a high-CO2, prebiotic atmosphere should have been largely determined by the balance between the H2O2 rainout rate and the rate at which hydrogen escaped to space, with only a weak dependence on the volcanic outgassing rate or on other speculative sources of H2. The implied upper limit on the ground-level O2 mixing ratio is approximately 10 to the -11th and is subject to less uncertainty than the results of previous models.

Kasting, J. F.↗

Fabrication of Graphene-Supported Palladium Nanoparticles-Decorated Zinc Oxide Nanorods for Potential Application

We report the facile synthesis of graphene-supported palladium (Pd) nanoparticles anchored zinc oxide nanorods (Pd-ZnO/G) by the sol-gel method. X-ray diffraction (XRD) pattern confirmed the hexagonal wurtzite crystal structure (with P6{sub 3}mc phase) of Pd-ZnO/G nanorods similar to ZnO structure. X-ray diffraction results showed that graphene-supported Pd nanoparticles anchored on ZnO nanorods increases the average crystallite size of ZnO nanorods. Field emission scanning electron microscopy (FESEM) revealed the successful anchoring of Pd nanoparticles on the surface of ZnO/G nanorods. X-ray spectroscopy (XPS) was used to obtain the different oxidation state and surface compositional details of nanorods. Energy dispersive spectroscopy analysis confirmed the presence of palladium, carbon, and oxygen in Pd-ZnO/G structure. The optical absorption measurement indicates that after graphene and palladium doping, it shifted towards the low wavelength region for Pd-ZnO/G structure and high wavelength region in the case of ZnO/G nanostructure. Magnetic measurement showed that the saturation magnetization of Pd nanoparticles anchored nanorods increased when compared with that of ZnO/G and ZnO nanorods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phosphonate-Derivatized Porphyrins for Photoelectrochemical Applications

A series of phosphonate-derivatized, high redox potential porphyrins with mesityl, pentafluorophenyl, and heptafluoropropyl meso-substituents were synthesized by acid-catalyzed condensation reactions. Ground and excited state redox potentials in the series were varied systematically with the electron-donating or electron-accepting nature of the meso-substitutents. Here, the extent of excitation and injection by porphyrin singlet excited states surface-bound to SnO 2 /TiO 2 core/shell metal oxide nanoparticle films varies with the excited state reduction potential, E°'(P+/P*). Furthermore, with the mesityl-substituted porphyrin, high current density and sustained photocurrents are observed at pH 7 with the addition of the electron transfer donor hydroquinone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of growth dynamics on the structural, photophysical and pseudocapacitance properties of famatinite copper antimony sulphide colloidal nanostructures (including nanosheets)

Facile phase selective synthesis of copper antimony sulphide (CAS) nanostructures is important because of their tunable photoconductive and electrochemical properties. In this study, off-stoichiometric famatinite phase CAS (fCAS) quasi-spherical and quasi-hexagonal colloidal nanostructures (including nanosheets) of sizes, 2.4–18.0 nm were grown under variable conditions of temperature (60–200 °C), time and oleylamine capping ligand concentration using copper(II) acetylacetonate and antimony(III) diethyldithiocarbamate precursors. Data from powder X-ray diffraction, Raman spectroscopy and high-resolution scanning/transmission electron microscopy confirm the tetragonal structure of the famatinite phase. X-ray photoelectron spectroscopy, transmission electron microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy data suggest a correlation of particle size, morphology and composition of the off-stoichiometric fCAS nanostructures with growth temperature and time, and oleylamine concentration. The off-stoichiometric Cu 3-a Sb 1+b S 4±c (a, b, c – mole fractions) nanostructures being severely copper-deficient and antimony-rich, exhibit shallow-lying acceptor copper vacancy states, deep-lying donor states of antimony interstitials, sulphur vacancies and antimony-copper antisites and shallow-lying acceptor surface trapping states. Further, these electronic states are likely implicated in tunable UV-visible absorption and bandgaps between 2.3 and 2.8 eV, and broad visible-NIR photoluminescence with fast recombination of radiative lifetimes between 0.2 and 6.2 ns, confirmed from absorption, steady-state and time-resolved photoluminescence spectroscopies. Additionally, cyclic voltammetry and electrochemical impedance spectroscopy confirm that electrodes of the fCAS nanostructures display slightly variable pseudocapacitance of charge-storage primarily via possible sodium ion intercalation with a high specific capacitance of ~84 F g -1 obtained at a scan rate of 5 mV s -1 . Overall, these results show the influence of composition, in particular point defects, phase quality and morphology on the optical and pseudocapacitance properties of fCAS nanostructures, suitable as solar absorbers or electrodes for energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Activities of the Marshall Space Flight Center Natural Environments Branch Terrestrial & Planetary Environments Team

- The Natural Environments (NE) Branch is within the MSFC Engineering Directorate’s Spacecraft and Vehicle System (S&VS) Department - S&VS plans, performs and directs the technical Design, Analysis, Test, Evaluation, Verification, Integration, and Applied Research and Development of future Spacecraft and Launch Vehicle Systems - Current programs we support - Space Launch System, Human Landing System, Mars Ascent Vehicle, Orion, Gateway - NE maintains expertise in terrestrial, space, and planetary natural environments definition, characterization, and analysis - Responsibility to disseminate this expertise to Agency programs and projects in support of environment definition, requirements development, vehicle development, operations, and sustaining engineering through program’s life cycle - Branch has two teams; Terrestrial and Planetary Environments (T&PE) and Space Environments (SE) - T&PE has extensive expertise characterizing terrestrial surface and atmospheric (aloft) environments - Winds, temperature, humidity, pressure, lightning, density, precipitation, radiant energy, aerosols, sea state, sea surface temperature - Maintains climatological databases for engineering analyses

Ryan K. Decker↗

Conducting and insulating LaAlO{sub 3}/SrTiO{sub 3} interfaces: A comparative surface photovoltage investigation

Surface photovoltage (SPV) spectroscopy, which is a versatile method to analyze the energetic distribution of electronic defect states at surfaces and interfaces of wide-bandgap semiconductor (hetero-)structures, is applied to comparatively investigate heterostructures made of 5-unit-cell-thick LaAlO{sub 3} films grown either on TiO{sub 2}- or on SrO-terminated SrTiO{sub 3}. As shown in a number of experimental and theoretical investigations in the past, these two interfaces exhibit dramatically different properties with the first being conducting and the second insulating. Our present SPV investigation reveals clearly distinguishable interface defect state distributions for both configurations when interpreted within the framework of a classical semiconductor band scheme. Furthermore, bare SrTiO{sub 3} crystals with TiO{sub 2} or mixed SrO/TiO{sub 2} terminations show similar SPV spectra and transients as do LaAlO{sub 3}-covered samples with the respective termination of the SrTiO{sub 3} substrate. This is in accordance with a number of recent works that stress the decisive role of SrTiO{sub 3} and the minor role of LaAlO{sub 3} with respect to the electronic interface properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of the stability and migration of Kr, I and Xe in ZrO2

The stability and migration of Kr, I and Xe in bulk ZrO2 and on the ZrO2 (1 1 1) surface have been studied by standard density functional theory (DFT) and the DFT-D2 method that corrects for the van der Waals interaction. Both methods show that Kr and Xe prefer to incorporate in the bulk phase rather than adsorb on the surface, and Xe is very mobile in the bulk state. For Kr and Xe adsorption on the surface, van der Waals interaction dominates, causing the weak interaction between the adsorbate and substrate. Iodine is found to have comparable stability in both phases and forms I O bonds with strong covalency. It exhibits higher mobility on the surface than in the bulk ZrO2, and diffusion from bulk-like state to surface state is an exothermic process. The fission product behavior in ZrO2 is shown to be a complicated synergetic effect of fission product atomic size, electron negativity, occupation site and phase structure of the host.

Xiao, Haiyan↗

Polymer escape from a confining potential

The rate of escape of polymers from a two-dimensionally confining potential well has been evaluated using self-avoiding as well as ideal chain representations of varying length, up to 80 beads. Long timescale Langevin trajectories were calculated using the path integral hyperdynamics method to evaluate the escape rate. A minimum is found in the rate for self-avoiding polymers of intermediate length while the escape rate decreases monotonically with polymer length for ideal polymers. The increase in the rate for long, self-avoiding polymers is ascribed to crowding in the potential well which reduces the free energy escape barrier. An effective potential curve obtained using the centroid as an independent variable was evaluated by thermodynamic averaging and Kramers rate theory then applied to estimate the escape rate. While the qualitative features are well reproduced by this approach, it significantly overestimates the rate, especially for the longer polymers. The reason for this is illustrated by constructing a two-dimensional effective energy surface using the radius of gyration as well as the centroid as controlled variables. This shows that the description of a transition state dividing surface using only the centroid fails to confine the system to the region corresponding to the free energy barrier and this problem becomes more pronounced the longer the polymer is. A proper definition of a transition state for polymer escape needs to take into account the shape as well as the location of the polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectrochemical properties of MOF-induced surface-modified TiO 2 photoelectrode

Heteroatom doping and surface modification with oxides are both important strategies to improve the photoelectrochemical (PEC) activities of TiO 2 photoelectrodes. However, it is difficult to combine the two strategies into a single synthesis process. Herein, a simple one-pot synthesis method was developed to modify a TiO 2 photoelectrode surface by N-doping while simultaneously modifying the surface with In 2 O 3 and NiO. This method involved growing MOF onto a TiO 2 surface with N-containing organic ligands and In and Ni salts as metal precursors, followed by heat treatment at 600 °C. The roles of heteroatom doping and oxide modification are proposed as follows. (i) N-Doping extends the absorption edge of the TiO 2 to a longer wavelength region and enhances visible light absorption. (ii) N-Doping together with the passivation of TiO 2 surface trap states by oxide modification increases the donor density in TiO 2 . (iii) The generated suitable interfaces on the surface of TiO 2 facilitate photogenerated charge separation and transfer. In comparison with the pristine TiO 2 photoelectrode, the metal oxide- and heteroatom-modified TiO 2 photoelectrode exhibits superior photoelectrochemical performance under both simulated sunlight and visible light illumination. Suitable substrate of the electrode, appropriate size of the as-synthesized MOF precursors, and choice of ligands and metal ions are important factors for this strategy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Sensitivity of US Wildfire Occurrence to Pre-Season Soil Moisture Conditions Across Ecosystems

It is well accepted that drought and low moisture conditions are linked with increased wildfire occurrence. However, quantifying the sensitivity of wildfire to surface moisture state has been challenging due to a lack of soil moisture observations at an appropriate spatial scale. Here we apply model simulations of surface soil moisture that numerically assimilate observations from NASA’s Gravity Recovery and Climate Experiment (GRACE) mission, combined in a predictive algorithm with the US Forest Service’s Fire-Occurrence Database. We estimate a relationship between historic surface moisture and wildfire occurrence to produce annual probable wildfire occurrence and burned area at 0.25-degree resolution for the contiguous United States by land-cover classification. Cross-validation indicates increased frequency of smaller fires when the months preceding fire season are wet, while larger fires are more frequent when soils are dry. This demonstrates that assimilated GRACE data holds information that could aid national-scale fire potential assessments for early decision-support.

Fire-Occurrence database↗

Dependence of the surface backscattering coefficients on roughness, frequency and polarization states

This paper summarizes the properties of the surface backscattering coefficient as a function of roughness, incidence angle, frequency and polarization state. Results are presented in the form of like- and cross-polarized backscattering coefficient curves versus the incidence angle and the polarization state for different values of the surface roughness parameters and frequency. It is seen that there is a gradual transition from the standard small perturbation scattering model into the Kirchhoff scattering model as frequency increases. It is also shown that in the intermediate frequency region neither the small perturbation nor the Kirchhoff model is applicable. The maximum value of the polarized backscattering coefficient occurs at VV polarization and its two minimum values occur at zero ellipticity and orientation angles between 0 deg and 45 deg and between 135 deg and 180 deg. The cross-polarized scattering coefficient has two maximum values which occur in the same polarization state regions as the minima of the polarized coefficients.

Fung, A. K.↗

Modeling quantum yield, emittance, and surface roughness effects from metallic photocathodes

Here, detailed measurements of momentum distributions of emitted electrons have allowed the investigation of the thermal limit of the transverse emittance from metal photocathodes. Furthermore, recent developments in material design and growth have resulted in photocathodes that can deliver high quantum efficiency and are sufficiently robust to use in high electric field gradient photoinjectors and free electron lasers. The growth process usually produces photoemissive material layers with rough surface profiles that lead to transverse accelerating fields and possible work function variations, resulting in emittance growth. To better understand the effects of temperature, density of states, and surface roughness on the properties of emitted electrons, we have developed realistic three-dimensional models for photocathode materials with grated surface structures. They include general modeling of electron excitation due to photon absorption, charge transport, and emission from flat and rough metallic surfaces. The models also include image charge and field enhancement effects. We report results from simulations with flat and rough surfaces to investigate how electron scattering, controlled roughness, work function variation, and field enhancement affect emission properties. Comparison of simulation results with measurements of the quantum yield and transverse emittance from flat Sb emission surfaces shows the importance of including efficient modeling of photon absorption, temperature effects, and the material density of states to achieve agreement with the experimental data.

36 MATERIALS SCIENCE↗

Study of the confined states in Al{sub x}Ga{sub 1−x}As/GaAs/vacuum surface quantum well

In this paper, we investigate the optical properties of confined electronic states in ultra-thin Al{sub 0.27}Ga{sub 0.73}As/GaAs/vacuum surface quantum wells by using photoreflectance spectroscopy at room temperature. Well-resolved doublet structures were found in the spectra. The energy of the features increases with decreasing well width in agreement with the predictions of a model of the transition energy between confined electron and hole states in a surface quantum well. Both the transition broadening and intensity behaviors are also well explained by the effective mass approximation theory. The offset between the un-perturbed theoretical transition energy and the experimental data has been explained by surface-state interaction effects. Moreover, the fact that the light hole ground state in the surface quantum well can be pushed out from the surface quantum well has been directly observed experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exotic Paired States with Anisotropic Spin-Dependent Fermi Surfaces

We propose a model for realizing exotic paired states in cold Fermi gases by using a spin-dependent optical lattice to engineer mismatched Fermi surfaces for each hyperfine species. The BCS phase diagram shows a stable paired superfluid state with coexisting pockets of momentum space with gapless unpaired carriers, similar to the Sarma state in polarized mixtures, but in our case the system is unpolarized. We propose the possible existence of an exotic 'Cooper-pair Bose-metal' phase, which has a gap for single fermion excitations but gapless and uncondensed 'Cooper-pair' excitations residing on a 'Bose surface' in momentum space.

36 MATERIALS SCIENCE↗

Bogoliubov Fermi surfaces in spin-$\frac{1}{2}$ systems: Model Hamiltonians and experimental consequences

Bogoliubov Fermi surfaces (BFSs) are topologically protected regions of zero energy excitations in a superconductor whose dimension equals that of the underlying normal state Fermi surface. Examples of Hamiltonians exhibiting this “ultranodal” phase are known to preserve charge-conjugation ($\textit{C}$) and parity ($\textit{P}$) but break time-reversal ($\textit{T}$). In this work, we provide examples of model Hamiltonians that do not necessarily preserve this symmetry pattern but have well-defined sign-changing Pfaffians yielding BFSs. While their topological character has not been recognized previously, some of the models we present have been extensively studied in prior literature. Here, we further examine thermodynamic and electronic properties arising from the ultranodal state. In particular, we study the effect of a weak Zeeman field close to the topological transition and propose distinguishing features of BFSs using residual specific heat and tunneling conductance. Our calculation of the superfluid density in a toy multiband model indicates a window of interband pairing strength where BFSs are stable with a positive superfluid density. We also present additional signatures of BFSs in spin-polarized spectral weight and total magnetization measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solar wind and terrestrial atmosphere effects on lunar sample surface composition

Samples returned from the Apollo missions have been shown to have undergone a partial surface oxidation with the degree of oxidation being dependent on the intensity and duration of exposure to a terrestrial or other oxidizing atmosphere. Exposure to atomic hydrogen at room temperature, or molecular hydrogen above 100 C results in a surface reduction. The adsorption of water vapor on a test sample was found to be only slightly dependent on the state of surface oxidation, a situation consistent with the formation of hydroxyl groups on the surface when a sample is exposed to hydrogen. That hydroxyl groups are indeed formed is substantiated by the release of water vapor (and by release of heavy water following exposure to deuterium), indicating that water vapor can be synthesized from solar wind hydrogen and sample oxygen. Observations of trace amounts of methane indicate that the reduction process is by no means restricted to the formation of water vapor.

Cadenhead, D. A.↗