Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solids flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Damaged Surface Hydrodynamics (DSH) Flash Report

In an effort to understand the complex hydrodynamic flow present when a non-ideal (or damaged) surface between a dense, solid-state metal impinges on a light, gas in converging geometry, two DSH experiments have been conducted at the LANL LANSCE pRad facility utilizing magnetic drive from the Precision High Energy-density Liner Implosion eXperiment (PHELIX) pulsed power capacitor bank. Here a tungsten power coated target aluminum cylinder was filled with inert gas (Ar/Xe). An outer aluminum cylinder is magnetically accelerated and impacts the target shock launching the powder into the gas and compressing the cylinder until such time as the increase in gas pressure causes stagnation. Each experiment is imaged with a 21-frame proton radiography movie where gas shocks, powder distribution, and target cylinder are clearly visible. These two experiments complement the DSH-0 experiment from FY14 where the target cylinder was evacuated as a control case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Stress and tangent update equations for combined time-hardening creep and J 2 plasticity in an implicit hypo-elastic formulation

This work is motivated by the need to analyze the behavior of metallic nuclear fuels which under normal operating conditions build up stresses due to non-homogeneous thermal expansion, fission gas and solid product swelling among other phenomena that are simultaneously relaxed by creep and plastic flow. This report details the stress and tangent update equations for combined J 2 based rate independent plasticity and time-hardening creep effects in a fully implicit hypo-elastic formulation involving two cases: pure creep without plasticity where the yield criterion has not yet been met and the combined effect of both creep and plasticity beyond yield. Closed form expressions for the consistent material tangent to be used in both cases are derived which can be used in implicit codes and is expected to help in obtaining optimal convergence rates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

A general constitutive framework for the combined creep, plasticity and swelling behavior of nuclear fuels in an implicit hypoelastic formulation

This work is motivated by the need to analyze the behavior of nuclear fuels which under normal operating conditions build up stresses due to non-homogeneous thermal expansion, fission gas and solid product swelling among other phenomena that are simultaneously relaxed by creep and plastic flow. This report details the stress and tangent update equations for combined J2 based rate independent plasticity, timehardening creep and fission gas induced swelling e ects in a fully implicit hypo-elastic formulation involving two cases: pure creep without plasticity where the yield criterion has not yet been met and the combined e ect of both creep and plasticity beyond yield. Closed form expressions for the consistent material tangent to be used in both cases are derived which can be used in implicit codes and is expected to help in obtaining optimal convergence rates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Liquid Piston with Spray Cooling Near-Isothermal Compressor

The goal of this project was to prototype and characterize the performance of a liquid-piston spray-cooled gas compressor. The working principle of the compressor enables optimized high-efficiency operation over a very wide range of operating conditions, unlike conventional compressors that are optimized for a narrow range of operating conditions. The compressor technology is suitable for many applications, such as gas pipeline transport, gas storage, and commercial and residential heat pumps. Both physical testing and computational fluid dynamics (CFD) modeling of the processes using the Oak Ridge National Laboratory high-performance computing center were completed. The experimental and CFD studies focused on a near-isothermal liquid-piston compressor (LPC) that uses propylene glycol to compress CO 2 . The first prototype demonstrated isothermal operation during several sequentially executed cycles of CO 2 compression and raised the temperature of the compressed CO 2 by only 2 K, compared with approximately 6 K when the gas was compressed non-isothermally. Isothermal operation was demonstrated at CO 2 flow rates of up to 2 L/min. The second prototype was designed with two compression chambers to allow continuous flow of high-pressure CO 2 . However, the design of the valve train to direct flow between the compression chambers was not sufficient to allow demonstration of CO 2 compression. Numerical simulations of the LPC in which the compression chamber was filled with propylene glycol injected from the bottom inlet were performed using large eddy simulation (LES) with the wall-adapting local eddy-viscosity subgrid-scale model coupled with the multiphase volume of fluid (VOF) model to simulate the transient interface between gas and liquid and to capture the heat and mass transfers within the compression chamber. In this effort, the effects of boundary conditions applied to the LES-VOF calculations (i.e., no wall, an adiabatic wall, and a wall with a heat flux subscribed) on the overall pressure and temperature of the CO 2 gas as well as the transient evolution of flow and heat transfer within the compression chamber were investigated and are discussed in this report. The LES calculation with no wall showed no dynamical flow patterns, and the volume-averaged temperature of CO 2 increased from 305 to 392.7 K, whereas LES calculations with a constant wall temperature or a wall heat flux had similar increases of CO 2 temperatures. The results of the LES simulation using a wall heat flux showed different stages in the compression process and revealed dynamical formation and interaction of CO 2 gas layers and circulation flow patterns within the chamber that contributed to the overall heat transfer between the solid wall, gas, and liquid surface in the compressor. Though an industrial partnership for commercializing the compressor was not secured, the technology was attractive for an industrial partner to use in two research proposals in response to US Department of Energy funding opportunity announcements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1973

Induction simulation of gas core nuclear engine

The design, construction and operation of an induction heated plasma device known as a combined principles simulator is discussed. This device incorporates the major design features of the gas core nuclear rocket engine such as solid feed, propellant seeding, propellant injection through the walls, and a transpiration cooled, choked flow nozzle. Both argon and nitrogen were used as propellant simulating material, and sodium was used for fuel simulating material. In addition, a number of experiments were conducted utilizing depleted uranium as the fuel. The test program revealed that satisfactory operation of this device can be accomplished over a range of operating conditions and provided additional data to confirm the validity of the gas core concept.

Poole, J. W.↗
NASA NTRS1973

An analysis of a charring ablator with thermal nonequilibrium, chemical kinetics, and mass transfer

The differential equations governing the transient response of a one-dimensional ablative thermal protection system are presented for thermal nonequilibrium between the pyrolysis gases and the char layer and with finite rate chemical reactions occurring. The system consists of three layers (the char layer, the uncharred layer, and an optical insulation layer) with concentrated heat sinks at the back surface and between the second and third layers. The equations are solved numerically by using a modified implicit finite difference scheme to obtain solutions for the thickness of the charred and uncharred layers, surface recession and pyrolysis rates, solid temperatures, porosity profiles, and profiles of pyrolysis-gas temperature, pressure, composition, and flow rate. Good agreement is obtained between numerical results and exact solutions for a number of simplified cases. The complete numerical analysis is used to obtain solutions for an ablative system subjected to a constant heating environment. Effects of thermal, chemical, and mass transfer processes are shown.

Clark, R. K.↗
NASA NTRS1973

Water quality determination by photographic analysis

Aerial reconnaissance techniques to extract water quality parameters from aerial photos are reported. The turbidity can be correlated with total suspended solids if the constituent parts of the effluent remain the same and the volumetric flow remains relatively constant. A monochromator is used for the selection of the bandwidths containing the most information. White reflectance panels are used to locate sampling points and eliminate inherent energy changes from lens flare, radial lens fall-off, and changing subject illumination. Misleading information resulting from bottom effects is avoided by the use of Secchi disc readings and proper choice of wavelength for analyzing the photos.

Klooster, S. A.↗
NASA NTRS1973

Further discrete variable results for a panel flutter optimization problem

Numerical solutions are presented for the problem of minimum weight design of a thin one-dimensional, simply supported, solid panel in compression, with one side exposed to a parallel high supersonic air flow. The flutter speed is held fixed and a minimum thickness constraint is imposed.

Pierson, B. L.↗
NASA NTRS1976

Ignition Transients of Large Segmented Solid Rocket Boosters

A model is described which provides a means for analyzing the complexities of ignition transients and pressure peaks of large, high performance, segmented solid rocket boosters. The method accounts for: (1) temporal and spatial development of the flow field set up by the head end igniter discharge, (2) ignition and flame spreading coupled to chamber flow, (3) the steep velocity, pressure, and temperature gradients that occur during the early phases of ignition, and (4) the interactions that produce ignition spikes (i.e., compression of chamber gases during pressurization, erosive burning, and mass added effect of igniter discharge). The technique differs from earlier models in that the flow interactions between the slots and main chamber are accounted for, and the original computer program for monolithic motors is improved. The procedures were used to predict the ignition transients of the current design for the space shuttle booster.

Caveny, L. H.↗
NASA NTRS1978

Adsorption and chemical reaction of gaseous mixtures of hydrogen chloride and water on aluminum oxide and application to solid-propellant rocket exhaust clouds

Hydrogen chloride (HCl) and aluminum oxide (Al2O3) are major exhaust products of solid rocket motors (SRM). Samples of calcination-produced alumina were exposed to continuously flowing mixtures of gaseous HCl/H2O in nitrogen. Transient sorption rates, as well as maximum sorptive capacities, were found to be largely controlled by specific surface area for samples of alpha, theta, and gamma alumina. Sorption rates for small samples were characterized linearly with an empirical relationship that accounted for specific area and logarithmic time. Chemisorption occurred on all aluminas studied and appeared to form from the sorption of about a 2/5 HCl-to-H2O mole ratio. The chemisorbed phase was predominantly water soluble, yielding chloride/aluminum III ion mole ratios of about 3.3/1 suggestive of dissolved surface chlorides and/or oxychlorides. Isopiestic experiments in hydrochloric acid indicated that dissolution of alumina led to an increase in water-vapor pressure. Dissolution in aqueous SRM acid aerosol droplets, therefore, might be expected to promote evaporation.

Cofer, W. R., III↗
NASA NTRS1986

Effect of liquid droplets on turbulence in a round gaseous jet

The main objective of this investigation is to develop a two-equation turbulence model for dilute vaporizing sprays or in general for dispersed two-phase flows including the effects of phase changes. The model that accounts for the interaction between the two phases is based on rigorously derived equations for turbulence kinetic energy (K) and its dissipation rate epsilon of the carrier phase using the momentum equation of that phase. Closure is achieved by modeling the turbulent correlations, up to third order, in the equations of the mean motion, concentration of the vapor in the carrier phase, and the kinetic energy of turbulence and its dissipation rate for the carrier phase. The governing equations are presented in both the exact and the modeled formes. The governing equations are solved numerically using a finite-difference procedure to test the presented model for the flow of a turbulent axisymmetric gaseous jet laden with either evaporating liquid droplets or solid particles. The predictions include the distribution of the mean velocity, volume fractions of the different phases, concentration of the evaporated material in the carrier phase, turbulence intensity and shear stress of the carrier phase, droplet diameter distribution, and the jet spreading rate. The predictions are in good agreement with the experimental data.

Mostafa, A. A.↗
NASA NTRS1986

Thermal modeling of a metallic thermal protection tile for entry vehicles

The thermal Energy Flow Simulation (TEFS) computer program was developed to simulate transient heat transfer through composite solids and predict interfacial temperatures. The program and its usage are described. A simulation of the thermal response of a new thermal protection tile design for the Space Shuttle Orbiter is presented and graphically compared with actual data. An example is also provided which shows the program's usage as a design tool for theoretical models.

Wiese, M. R.↗
NASA NTRS1992

An efficient and robust grid optimization algorithm

The development of an efficient and robust grid optimization is presented. This algorithm is developed by combining the best characteristics of algebraic, elliptic, and hyperbolic grid generation techniques. This development is based on the following observations and evaluations: (1) algebraic systems are fast and economical; (2) precise spacing control is always achieved; (3) grid generation by elliptic systems is always smooth; and (4) the hyperbolic system preserves the orthogonality at the solid boundary and the point distribution in the field. Computational examples representing practical internal flow configurations are presented to demonstrate the algorithm.

Soni, Bharat K.↗
NASA NTRS1955

NACA Transonic Wind-tunnel Test Sections

Report presents an approximate subsonic theory for the solid-blockage interference in circular wind tunnels with walls slotted in the direction of flow. This theory indicated the possibility of obtaining zero blockage interference. Tests in a circular slotted tunnel based on the theory confirmed the theoretical predictions.

Wright, Ray H↗
NASA NTRS1998

Low Luminosity States of the Black Hole Candidate GX 339-4: ASCA and Simultaneous Radio/RXTE Observations - 1

We discuss a series of observations of the black hole candidate GX 339-4 in low luminosity, spectrally hard states. We present spectral analysis of three separate archival Advanced Satellite for Cosmology and Astrophysics (ASCA) data sets and eight separate Rossi X-ray Timing Explorer (RXTE) data sets. Three of the RXTE observations were strictly simultaneous with 843 Mega Hertz and 8.3-9.1 Giga Hertz radio observations. All of these observations have (3-9 keV) flux approximately less than 10(exp-9) ergs s(exp-1) CM(exp -2). The ASCA data show evidence for an approximately 6.4 keV Fe line with equivalent width approximately 40 eV, as well as evidence for a soft excess that is well-modeled by a power law plus a multicolor blackbody spectrum with peak temperature approximately equals 150-200 eV. The RXTE data sets also show evidence of an Fe line with equivalent widths approximately equal to 20-1OO eV. Reflection models show a hardening of the RXTE spectra with decreasing X-ray flux; however, these models do not exhibit evidence of a correlation between the photon index of the incident power law flux and the solid angle subtended by the reflector. 'Sphere+disk' Comptonization models and Advection Dominated Accretion Flow (ADAF) models also provide reasonable descriptions of the RXTE data. The former models yield coronal temperatures in the range 20-50 keV and optical depths of r approximately equal to 3. The model fits to the X-ray data, however, do not simultaneously explain the observed radio properties. The most likely source of the radio flux is synchrotron emission from an extended outflow of extent greater than O(10 (exp7) GM/c2).

Wilms, Joern↗
NASA NTRS1996

Interaction of Peroxynitric Acid with Solid H2O Ice

The uptake of peroxynitric acid (PNA), HO2NO2 or HNO4, on solid H2O ice at 193 K (-80 C) was studied using a fast flow-mass spectrometric technique. An uptake coefficient of 0.15 +/- 0.10 was measured, where the quoted uncertainty denotes 2 standard deviations. The uptake process did not result in the production of gas phase products. The composition of the condensed phase was investigated using programmed heating (3 K/min) of the substrate coupled with mass spectrometric detection of desorbed species. Significant quantities of HNO, and HNO3 desorbed from the substrates at temperatures above 225 K and 246 K, respectively. The desorbed HNO3, which was less than 9% of the desorbed HNO, and remained unchanged upon incubation of the substrate, was likely due to impurities in the HNO4 samples rather than reaction of HNO, on the substrate. The onset temperatures for HNO4 desorption increased with increasing H2O to HNO4 ratios, indicating that HNO4, like HNO3, tends to be hydrated in the presence of water. These observations suggest possible mechanisms for removal of HNO4 or repartitioning of total odd nitrogen species in the Earth's upper troposphere and stratosphere.

Li, Zhuangjie↗
NASA NTRS1999

1300 K Creep Behavior of [001] Oriented Ni-49Al-1Hf (at.%) Single Crystals

A study of the 1300 K compressive and tensile creep properties of [001]-oriented NiAl-1Hf (D209) single crystals has been undertaken. Neither post homogenization cooling treatment, minor chemical variations within an ingot or from ingot-to-ingot, nor testing procedure had a significant effect on mechanical behavior; however a heat treatment which dissolved the initial G-phase precipitates and promoted formation of Heusler particles led to a strength reduction. Little primary creep was found utilizing direct measurement of strain, and a misorientation of 18 deg from the [001] did not reduce the creep strength. The effects of heat treatments on properties and a comparison of the flow stress-strain rate data to those predicted by the Jaswon-Cottrell solid solution hardening model indicate that the 1300 K strength in NiAl-1Hf single crystals is mainly due to precipitation hardening mechanisms.

Whittenberger, J. Daniel↗
NASA NTRS2000

Mixed Element Type Unstructured Grid Generation for Viscous Flow Applications

A procedure is presented for efficient generation of high-quality unstructured grids suitable for CFD simulation of high Reynolds number viscous flow fields. Layers of anisotropic elements are generated by advancing along prescribed normals from solid boundaries. The points are generated such that either pentahedral or tetrahedral elements with an implied connectivity can be be directly recovered. As points are generated they are temporarily attached to a volume triangulation of the boundary points. This triangulation allows efficient local search algorithms to be used when checking merging layers, The existing advancing-front/local-reconnection procedure is used to generate isotropic elements outside of the anisotropic region. Results are presented for a variety of applications. The results demonstrate that high-quality anisotropic unstructured grids can be efficiently and consistently generated for complex configurations.

Marcum, David L.↗