Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Effect of the electron energy distribution function in plasma on the Bohm criterion and on the drop voltage through the sheath: Case of microwave expanding plasma

This work is devoted to the study of the sheath expansion above a charged species collector immersed into the plasma in the general case of the electron energy distribution function (EEDF) (not necessarily a Boltzmann distributed function). In the first part, considering the general form of the electron kinetic energy distribution function (EEDF) in the plasma and assuming a one dimensional system, we propose an equation describing the limit value of the ion velocity at the sheath edge. Then, we extend this equation to the three dimensional problem. These results are discussed assuming Boltzmann distribution for the one dimensional system and Maxwell-Boltzmann distribution in the case of the three dimensional system. Both one and two temperature distributions are considered. Then, the method is applied to experimental results obtained in expanding microwave discharge sustained in argon. In the second part, we study the drop voltage through the sheath that is produced around a cylindrical collector biased at the floating potential. A theoretical model is given, and results are compared with experimental values measured by means of a cylindrical Langmuir probe immersed in microwave expanding plasma. The model agrees with experiments and points out the role of the EEDF profile on the ion velocity at the sheath edge and, consequently, on the drop voltage through the sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stimulated Brillouin scattering of the beat wave of two lasers in a plasma

Stimulated Brillouin scattering of two collinear lasers in a plasma is investigated. Lasers exert a longitudinal ponderomotive force on electrons, imparting them oscillatory axial velocity at the beat frequency. This velocity acts as a driver for parametric excitation of an ion acoustic wave (omega,k-vector) and a noncollinear sideband electromagnetic wave (omega{sup '},k-vector{sup '}). The driver velocity v-vector{sub 0-} couples to the sideband wave to exert a ponderomotive force at (omega,k-vector) on the electrons, driving the ion acoustic wave. The density perturbation of ion acoustic wave beats with v-vector{sub 0-} to produce a nonlinear current at (omega{sup '},k-vector{sup '}), driving the sideband. In the case of finite spot size Gaussian laser beams, the beat wave has a Gaussian profile and excites an ion acoustic wave (omega,k-vector) and a backscattered TM mode (omega{sup '},k-vector{sub z}{sup '}). The growth rate scales as the product of amplitudes of the lasers and maximizes at optimum values of scattering angles. The parametric instability of difference frequency driver is stronger than the sum frequency driver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of plasma velocity from light fluctuations in a cutting torch

Measurements of plasma velocities in a 30 A high energy density cutting torch are reported. The velocity diagnostic is based on the analysis of the light fluctuations emitted by the arc which are assumed to propagate with the flow velocity. These light fluctuations originate from plasma temperature and plasma density fluctuations mainly due to hydrodynamic instabilities. Fast photodiodes are employed as the light sensors. The arc core velocity was obtained from spectrally filtered light fluctuations measurements using a band-pass filter to detect light emission fluctuations emitted only from the arc axis. Maximum plasma jet velocities of 5000 m s{sup -1} close to the nozzle exit and about 2000 m s{sup -1} close to the anode were found. The obtained velocity values are in good agreement with those values predicted by a numerical code for a similar torch to that employed in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Similarity theory of nonlinear cold pair-plasma dynamics

In this article the waves and dynamics of an inhomogeneous cold magnetized electron-positron plasma are investigated using similarity methods to study particular classes of plasma wave behavior. A cold two-fluid plasma model in a cylindrical geometry ({rho},{theta},z) and time t is assumed, but attention is restricted to ({rho},t) variations only. The application of similarity procedures reduces the set of partial differential equations which describe the spatial and temporal evolution of the plasma to a set of ordinary differential equations. This model has particular relevance to the description of the evolution of the electron-positron component of pulsar magnetospheres. Some typical solutions of these similarity equations are presented which characteristically have the property of blow-up phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Examination of laser-triggered discharge using a virtual gas model and the similarity of its Paschen curve with those of inert gases

We examined laser-triggered discharge (LTD) under asymmetric electric fields in air. Upon introducing a virtual gas with npd (n=2.8-3) instead of pd in Paschen's law [Ann. Phys. Chem. 37, 69 (1889)], the results of LTD in air coincided with the Paschen curve. A Paschen curve similar to those of inert gases, i.e., Ne and He, can be obtained even in air. This implies that in LTD, the number of gas molecules between electrodes appears to be n times higher than that in air. In LTD in air, the gamma effect is presumed to be significant, similar to in inert gases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extension of the Bissell-Johnson plasma-sheath model for application to fusion-relevant and general plasmas

This article presents an approach to solving a special Fredholm-type integral equation of the first kind with a particular kernel containing a modified Bessel function for applications in plasma physics. From the physical point of view, the problem was defined by Bissell and Johnson (B and J) [Phys. Fluids 30, 779 (1987)] as a task to find the potential profile and the ion velocity distribution function in a plane-parallel discharge with a Maxwellian ion source. The B and J model is a generalization of the well-known Tonks-Langmuir (T and L) [Phys. Rev. 34, 876 (1929)] discharge model characterized by a ''cold'' ion source. Unlike the T and L model, which can be readily solved analytically, attempts to solve the B and J model with a ''warm'' ion source have been done only numerically. However, the validity of numerical solutions up to date remains constrained to a rather limited range of a crucial independent parameter of the B and J integral equation, which mathematically is the width of a Gaussian distribution and physically represents the ion temperature. It was solved only for moderately warm ion sources. This paper presents the exact numerical solution of the B and J model, which is valid without any restriction regarding the above-mentioned parameter. It is shown that the ion temperature is very different from the temperature of the ion source. The new results with high-temperature ion sources are not only of particular importance for understanding and describing the plasma-sheath boundary in fusion plasmas, but are of considerable interest for discharge problems in general. The eigenvalue of the problem, found analytically by Harrison and Thompson [Proc. Phys. Soc. 74, 145 (1959)] for the particular case of a cold ion source, is here extended to arbitrary ion-source temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical interferometric analysis of colliding laser produced air plasmas

Colliding air plasmas produced using 1064 nm Nd:YAG laser were analyzed using optical interferometry. For generating multiple air plasmas, the spherical aberrations of the focusing lens were used. The three-dimensional (3D) distributions of the electron density and the gas density behind shock wave front were investigated. The two-dimensional fast Fourier transform technique was used to extract the phase shift of the interferograms and a numerical inverse Abel transformation was applied to reconstruct the 3D distribution of the refractive index. Based on the Gladston-Dale relation, high resolution images of the 3D distributions of the electron density and the gas density were achieved. From the results, a stagnation layer was formed due to the collision of shock waves and the succeeding plasmas. The enhancements of electron density and gas density were observed in the collision zone. It shows that the collision region depends on the pulse energy. With smaller pulse energy, the thickness of the stagnation layer increased, while the enhancement of the gas density behind the shock wave front in the collision zone reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of planar-type overdense plasma with resonant excitation of surface plasmon polaritons

The present study presents a plasma source, capable of generating overdense plasma below the whole quartz plate while exciting surface plasmon polaritons (SPPs) by means of a subwavelength diffraction grating. The wavelength of surface wave, calculated on either the discharge image or the simulated electric field distribution graph, is about 5.7 cm, which approximates the theoretical value by a calculation of the SPP dispersion equation in overdense plasma. The operation mechanism of plasma heating is attributed to the resonant excitation of SPPs and its dissipation in plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accurate control of ion bombardment in remote plasmas using pulse-shaped biasing

This paper deals with a pulsed biasing technique employed to a downstream expanding thermal plasma. Two pulsed biasing approaches are presented: asymmetric rectangular pulses and modulated pulses with a linear voltage slope during the pulse, and their applicability is discussed on the basis of the intrinsic capacitance of the processed substrate-layer system. The substrate voltage and current waveforms are measured, and the relation to the obtained ion energy distributions is discussed. Accurate control of the ion bombardment is demonstrated for both aforementioned cases, and the cause of broadening of the peaks in the ion energy spectra is determined as well. Moreover, several methods to determine the modulated pulse duration, such that the sloping voltage exactly compensates for the drop of the substrate sheath potential due to charging, are presented and their accuracy is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma parameters of an active cathode during relativistic magnetron operation

The results of time- and space-resolved spectroscopic studies of the plasma produced at the surface of the ferroelectric cathode during the operation of an S-band relativistic magnetron generating approx50 MW microwave power at f=3005 MHz and powered by a linear induction accelerator (LIA) (150 kV, 1.5 kA, 250 ns) are presented. The surface plasma was produced by a driving pulse (3 kV, 150 ns) prior to the application of the LIA accelerating high-voltage pulse. The cathode plasma electron density and temperature were obtained by analyzing hydrogen H{sub a}lpha and H{sub b}eta, and carbon ions CII and CIII spectral lines, and using the results of nonstationary collision radiative modeling. It was shown that the microwave generation causes an increase in plasma ion and electron temperature up to approx4 and approx7 eV, respectively, and the plasma density increases up to approx7x10{sup 14} cm{sup -3}. Estimates of the plasma transport parameters and its interaction with microwave radiation are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strain, curvature, and twist measurements in digital holographic interferometry using pseudo-Wigner-Ville distribution based method

Measurement of strain, curvature, and twist of a deformed object play an important role in deformation analysis. Strain depends on the first order displacement derivative, whereas curvature and twist are determined by second order displacement derivatives. This paper proposes a pseudo-Wigner-Ville distribution based method for measurement of strain, curvature, and twist in digital holographic interferometry where the object deformation or displacement is encoded as interference phase. In the proposed method, the phase derivative is estimated by peak detection of pseudo-Wigner-Ville distribution evaluated along each row/column of the reconstructed interference field. A complex exponential signal with unit amplitude and the phase derivative estimate as the argument is then generated and the pseudo-Wigner-Ville distribution along each row/column of this signal is evaluated. The curvature is estimated by using peak tracking strategy for the new distribution. For estimation of twist, the pseudo-Wigner-Ville distribution is evaluated along each column/row (i.e., in alternate direction with respect to the previous one) for the generated complex exponential signal and the corresponding peak detection gives the twist estimate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calculations of synchrotron radiation emission in the transverse coherent limit

We present approximations for the synchrotron radiation emission for low emittance light sources, which provide a connection between user needs and the electron beam parameters. The results and calculations are a consequence of the phase coherence in the emission from the electrons. We derive the remarkable result that if the electron beam is energetic enough, the emitted flux is independent of the photon energy, electron beam energy, or bending radius in the transverse coherent limit. Similarly the brightness is identical for all machines at a given current.

43 PARTICLE ACCELERATORS↗

High temperature dilatation measurements by in situ laser interferometry under high magnetic field

This article contains a description of a laser interferometer coupled with a furnace for in situ dilatation measurements under high magnetic field. The apparatus fits an 18 T superconducting magnet with a 32 mm diameter room temperature bore. This optical method was chosen for dilatation measurements because it is not perturbated by the magnetic field. The measured sample can be heated up to 1500 K under a controlled atmosphere, and heating and cooling rates can be varied within a range of 10 K/s. The resolution is below 50 nm. As an example of using in situ dilatation measurements to follow phase transformations, the increase in the ferrite/austenite transformation temperature in pure iron in a magnetic field up to 16 T was experimentally evidenced.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of gas pressure and applied voltage on Xe excimer radiation from a micro dielectric barrier discharge for plasma display panel

We present the influence of gas pressure and applied voltage on Xe excimer radiation from a microdielectric barrier discharge (micro-DBD) in Ne/Xe gas mixture for plasma display panel. Measurements show that the excimer radiation with the 172 nm band lines is strongly observed in the afterglow, and drastically increases with an increase in gas pressure and applied voltage. It is also found that for high gas pressure and low voltage, excimer molecule (Xe{sub 2}{sup *}) is efficiently produced because of less infrared emission from Xe excited atom. The reaction processes of Xe metastable atom (Xe{sub 1s5}{sup *}), which is a precursor for Xe{sub 2}{sup *}, are theoretically analyzed using a one-dimensional fluid model. Increasing gas pressure results in large excimer radiation due to the enhancement of the following three processes, i.e., the conversion process from Xe{sub 1s5}{sup *} to Xe{sub 2}{sup *}, the direct electron impact excitation from ground state to Xe{sub 1s5}{sup *}, and the collisional de-excitation process from upper level (Xe{sup **}) to Xe{sub 1s5}{sup *}. The simulation analytical result shows that for lower voltage, Xe{sub 1s5}{sup *} is efficiently produced due to the increase in the ratio of direct excitation to Xe{sub 1s5}{sup *} from ground state and the suppression of the stepwise ionization from Xe{sub 1s5}{sup *} by electron collisions. While for high voltage operation of micro-DBD, the recombination process with Xe molecular ion (Xe{sub 2}{sup +}) and electron contributes to the total excimer radiation, which can be responsible for the large excimer radiation observed in experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of a CO{sub 2}/N{sub 2}/Ar supersonic flowing discharge

In this paper we are presenting the full characterization of a supersonic flowing CO{sub 2}/N{sub 2}/Ar discharge at static pressures of 1-20 Torr and Mach number 2.15. In all aspects besides the flow speed and gas temperature, these conditions correspond to Martian entry plasma. Plasma parameters were determined by optical emission spectroscopy techniques. The gas and vibrational temperature were found from analysis of the rotational and vibrational spectra of the CO B {sup 1}SIGMA{sup +}-A {sup 1}PI Angstrom system, respectively. The electron density was determined from the absolute intensity of the N{sub 2}C {sup 3}PI{sub u}-B {sup 3}PI{sub g} second positive system. A kinetic model for the discharge was developed to calculate the electron density and compared with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal measurement strategies for effective suppression of drift errors

Drifting of experimental setups with change in temperature or other environmental conditions is the limiting factor of many, if not all, precision measurements. The measurement error due to a drift is, in some sense, in-between random noise and systematic error. In the general case, the error contribution of a drift cannot be averaged out using a number of measurements identically carried out over a reasonable time. In contrast to systematic errors, drifts are usually not stable enough for a precise calibration. Here a rather general method for effective suppression of the spurious effects caused by slow drifts in a large variety of instruments and experimental setups is described. An analytical derivation of an identity, describing the optimal measurement strategies suitable for suppressing the contribution of a slow drift described with a certain order polynomial function, is presented. A recursion rule as well as a general mathematical proof of the identity is given. The effectiveness of the discussed method is illustrated with an application of the derived optimal scanning strategies to precise surface slope measurements with a surface profiler.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a straightness measurement and compensation system with multiple right-angle reflectors and a lead zirconate titanate-based compensation stage

This paper presents a real-time straightness measurement and compensation system with an optical straightness measurement system and a single-axis flexure-hinge type lead zirconate titanate (PZT)-based compensation stage. The optical straightness measurement system consists of a He-Ne laser, a quadrant photodiode detector, and five right-angle reflectors. Multiple laser beam reflections between the right-angle reflectors increase the sensitivity of the straightness measurement by a factor of 6. The right-angle reflectors can be moved by the flexure-hinge type PZT-based compensation stage that is actuated by a PZT actuator to ensure that the laser beam is always projected onto the center of the quadrant detector. These two systems are integrated and fixed on a scanning stage. The resolution of the straightness measurement system is 0.1 {mu}m. Using the real-time straightness compensation system, the straightness error of the scanning stage is fed back to the control system. The compensated straightness error of the scanning stage system was reduced from 6.5 {mu}m to less than 1 {mu}m.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High resolution miniature dilatometer based on an atomic force microscope piezocantilever

Thermal expansion, or dilation, is closely related to the specific heat, and provides useful information regarding material properties. The accurate measurement of dilation in confined spaces coupled with other limiting experimental environments such as low temperatures and rapidly changing high magnetic fields requires a new sensitive millimeter size dilatometer that has little or no temperature and field dependence. We have designed an ultracompact dilatometer using an atomic force microscope piezoresistive cantilever as the sensing element and demonstrated its versatility by studying the charge density waves in alpha uranium to high magnetic fields (up to 31 T). The performance of this piezoresistive dilatometer was comparable to that of a titanium capacitive dilatometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗