Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pointing control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Time course field analysis of COMT-downregulated switchgrass: Lignification, recalcitrance, and rust susceptibility

Modifying plant cell walls by manipulating lignin biosynthesis can improve biofuel yields from lignocellulosic crops. For example, transgenic switchgrass lines with downregulated expression of caffeic acid O-methyltransferase, a lignin biosynthetic enzyme, produce up to 38% more ethanol than controls. The aim of the present study was to understand cell wall lignification over the second and third growing seasons of COMT-downregulated field-grown switchgrass. COMT gene expression, lignification, and cell wall recalcitrance were assayed for two independent transgenic lines at monthly intervals. Switchgrass rust (Puccinia emaculata) incidence was also tracked across the seasons. Trends in lignification over time differed between the 2 years. In 2012, sampling was initiated in mid-growing season on reproductive-stage plants and there was little variation in the lignin content of all lines (COMT-downregulated and control) over time. COMT-downregulated lines maintained 11-16% less lignin, 33-40% lower S/G (syringyl-to-guaiacyl) ratios, and 15-42% higher sugar release relative to controls for all time points. In 2013, sampling was initiated earlier in the season on elongation-stage plants and the lignin content of all lines steadily increased over time, while sugar release expectedly decreased. S/G ratios increased in non-transgenic control plants as biomass accumulated over the season, while remaining relatively stable across the season in the COMT-downregulated lines. Differences in cell wall chemistry between transgenic and non-transgenic lines were not apparent until plants transitioned to reproductive growth in mid-season, after which the cell walls of COMT-downregulated plants exhibited phenotypes consistent with what was observed in 2012. There were no differences in rust damage between transgenics and controls at any time point. Finally, these results provide relevant fundamental insights into the process of lignification in a maturing field-grown biofuel feedstock with downregulated lignin biosynthesis.

09 BIOMASS FUELS↗

Autonomous Hydrogen Fueling Station

This project “Autonomous Hydrogen Fueling Station” covered the autonomous refueling with both gaseous hydrogen and liquid hydrogen. The part on gaseous hydrogen focused on the development of an autonomous robotic fueling arm that would couple to a fuel cell engine for hydrogen refueling without guidance from the forklift operator and budget period. Research was also covered for the robotic fueling with a commercial vehicle. The second phase of the project created the baseline for an autonomous liquid hydrogen transfer system that would minimize boil off losses by operating at thermodynamically efficient state points. For the development of the robotic fueling arm, testing was conducted to establish a baseline measurement of the accuracy and repeatability of a human operator positioning a lift truck in front of a dispenser. The goal was to establish the range of motion required for an autonomous fueling mechanism to mate a hydrogen nozzle with a receptacle on a fuel cell system installed in a forklift. The final design comprised a selective compliance articulated robot arm (SCARA)-type mechanism with two arms for horizontal motion and a ball screw for vertical movement and color and LIDAR cameras were used for marker identification and proximity awareness to guide the robotic arm to its target receptacle. Initial tests resulted in 199 out of 200 successful attempts at autonomous coupling of the dispensing coupler and a fuel cell engine, without hydrogen. The dispenser prototype was modified to include tubing for both hydrogen fuel and air purge lines, but subsequent tests were confounded by the shoulder motor over current errors which limited the robot from getting to the fully inserted position to achieve a positive latch. Robotic hydrogen refueling was successfully demonstrated over 1.5 hours of testing, Plug completed 29 successful latches with an average number of 4 sequential latches before failure. However, a robot capable of placing the nozzle with more force is required for higher reliability. For budget period two, a small scale (10 kg / transfer) automated control system was designed that would operate valves to control pressure and flow of liquid nitrogen between a source and receiving tank with an aim to minimize boil off losses by operating at the most thermodynamically efficient state points. Control system logic flow and a P&ID were developed prior to system safety characterization via HAZOP. A control narrative and system state points were defined. Delays in approval for a change of project objective and procurement issues precluded the construction and test of the final prototype system.

08 HYDROGEN↗

Extended Defects in Cdznte Radiation Detectors

Large-volume CdZnTe (CZT) single crystals with electron lifetime exceeding 10 mus have recently become commercially available. This opened the opportunity for making room temperature CZT gamma-ray detectors with extended thicknesses and larger effective areas. However, the extended defects that are present even in the highest-quality material remain a major drawback which affects the availability and cost of large CZT detectors. In contrast to the point defects that control electron lifetime and whose effects on the charge collection can be electronically corrected, the extended defects introduce significant fluctuations in the collected charge, which increase with a crystal's thickness. The extended defects limit the uniformity in the electrons' drift distance in CZT crystals, above which electron trapping cannot effectively be corrected. In this paper, we illustrate the roles of the extended defects in CZT detectors with different geometries. We emphasize that the crystallinity of commercial CZT materials remains a major obstacle on the path to developing thick, large-volume CZT detectors for gamma-ray imaging and spectroscopy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Manus Water Isotope Investigation Field Campaign Report

The objective of this field campaign was to investigate climatic controls on the stable isotopic composition of water vapor, precipitation, and seawater in the western tropical Pacific. Simultaneous measurements of the stable isotopic composition of vapor and precipitation from April 28 to May 8, 2013, at the Manus Tropical Western Pacific Atmospheric Radiation Measurement site, provided several key insights into the nature of the climate signal archived in precipitation and vapor isotope ratios. We observed a large shift from lower to higher isotopic values in vapor and precipitation because of the passage of a mesoscale convective system west of the site and a transition from a regional stormy period into a more quiescent period. During the quiescent period, the stable isotopic composition of vapor and precipitation indicated the predominance of oceanic evaporation in determining the isotopic composition of boundary-layer vapor and local precipitation. There was not a consistent relationship between intra-event precipitation amount at the site and the stable isotopic composition of precipitation, thus challenging simplified assumptions about the isotopic “amount effect” in the tropics on the time scale of individual storms. However, some storms did show an amount effect, and deuterium excess values in precipitation had a significant relationship with several meteorological variables, including precipitation, temperature, relative humidity, and cloud base height across all measured storms. The direction of these relationships points to condensation controls on precipitation deuterium excess values on intra-event time scales. The relationship between simultaneous measurements of vapor and precipitation isotope ratios during precipitation events indicates the ratio of precipitation-to-vapor isotope ratios can diagnose precipitation originating from a vapor source unique from boundary-layer vapor and rain re-evaporation.

mesoscale convective systems↗

Comparative Performance of Gaussian Plume and Backward Lagrangian Stochastic Models for Near-Field Methane Emission Estimation Using a Single Controlled Release Experiment

Methane (CH 4 ) is a major component of natural gas and a potent greenhouse gas. Increasing atmospheric methane concentrations are attributed to emissive anthropogenic activities by an average of 13 ppb per yr since 2020 and are linked to a changing global climate. Mitigating CH 4 emissions from oil and gas production sites has recently become a target to reduce overall greenhouse gas emissions; however, monitoring the efficacy of mitigation strategies depends on accurate quantification of CH 4 emissions at the facility-level. Near-field quantification of methane (CH 4 ) emissions from oil and gas (O&G) facilities remains challenging due to the effects of atmospheric variability and sensor configuration on atmospheric dispersion models. This study evaluates the performance of two atmospheric dispersion models, the Gaussian plume (GP) and backward Lagrangian stochastic (bLS), by comparing calculated CH 4 emissions to controlled single-point emissions between 0.4 and 5.2 kg CH 4 h −1 . Emissions were calculated by both models using 121 individual sets of measurements comprising five-minute averaged downwind methane mixing ratios and matching meteorological data. The comparison shows that the bLS approach achieved a higher proportion of emission estimates within a factor of two (FAC2) of the known emission rates compared to the GP approach. The emissions calculated by the bLS model also had a lower multiplicative error and reduced bias relative to GP. Other error-based metrics further confirmed the bLS model performed better, as it yielded lower RMSE and MAE than GP. Statistical analysis of the emission data shows that the lateral and vertical alignment of the source and the sensor plays a critical role in emission estimations, as measurements made closer to the plume centerline and at a distance between 40 and 80 m downwind yielded the best FAC2 agreement. High wind meander degraded the ability of both approaches to generate representative emissions, particularly with the GP approach, as it violates the modeling approach’s assumption of steady-state emissions. Data suggest emissions calculated by the bLS model are comprehensively in better agreement, but the computational demands of the modeling approach and integration into fenceline systems limit real-time applicability. While these results provide insight into model performance under controlled near-field conditions, their applicability to more complex or heterogeneous oil and gas production environments (e.g., the regions Marcellus or Unita Basins) remains limited and uncertain.

gaussian plume↗

Structure, Stability, and Electronic Properties of Boron Suboxide: A Density Functional Theory Study

Boron suboxide (B 6 O) is a boron-rich compound derived from the α-rhombohedral boron lattice with extreme hardness and unusual semiconducting properties. In this work, density functional theory (DFT) was used to show that unit cell volume, mechanical strength, band gaps, and thermodynamic stabilities of B 6 O were influenced by the interstitial elements and point defects at the icosahedral sites. While the hexagonal unit cell volume (HUCV) varies with interstitial occupancy, it is the icosahedral defect that weakens the intrinsic bulk modulus of B 6 O. Using the hybrid HSE functional, we confirmed that the perfect B 6 O bulk is a p-type semiconductor with a direct band gap of 2.8 eV. Furthermore, by screening α-boron compounds systematically, we found that a simple octet rule may offer a consistent explanation for the variations in the computed electronic structures. The formation free energies calculated over a wide range of temperatures (0–2500 K) and pressures (0–80 GPa) predict that formations of interstitial defects become favorable only at higher temperatures (ca. 1800 K) in bulk B 6 O lattices. The nudged elastic band (NEB) method was employed to identify the minimum energy pathways for the diffusions of dislocated B and O atoms. The diffusion of icosahedral B atoms has an energy barrier of 0.16 eV. More complex B diffusion paths involving the reorganization of icosahedral boron atoms incur higher barriers (>1 eV). In contrast, the diffusion of interstitial O atoms is facile with a barrier of 0.4 eV. Lastly, successive O insertions into the α-B lattice were performed using DFT to generate a basic understanding of the oxidation process. Furthermore, these calculations provide fundamental atomistic insights into the growth of B 6 O crystals and control of their point defects.

36 MATERIALS SCIENCE↗

Instrument canister thermal control

A transient thermal analysis and test of a thermal control canister is described. The 1 x 1 x 3 m canister provides a uniform thermal environment for shuttle instrument payloads requiring fine temperature control, the design goal being operation between 0 C and 20 C with a range of plus or minus 1 C at any selected set-point temperature. The canister side walls are isothermalized by a system of longitudinal and circumferential heat pipes rejecting heat through feedback controlled, variable conductance heat pipes to side mounted radiators. A breadboard model of two side walls and two radiators was tested in a thermal vacuum chamber. The breadboard was stable over a wide range of effective environments, experiment dissipations, and control point temperature levels.

Harwell, W.↗

System-Level Design of a Shape Memory Alloy Actuator for Active Clearance Control in the High-Pressure Turbine

This paper describes results of a numerical analysis evaluating the feasibility of high-temperature shape memory alloys (HTSMA) for active clearance control actuation in the high-pressure turbine section of a modern turbofan engine. The prototype actuator concept considered here consists of parallel HTSMA wires attached to the shroud that is located on the exterior of the turbine case. A transient model of an HTSMA actuator was used to evaluate active clearance control at various operating points in a test bed aircraft engine simulation. For the engine under consideration, each actuator must be designed to counteract loads from 380 to 2000 lbf and displace at least 0.033 inches. Design results show that an actuator comprised of 10 wires 2 inches in length is adequate for control at critical engine operating points and still exhibits acceptable failsafe operability and cycle life. A proportional-integral-derivative (PID) controller with integrator windup protection was implemented to control clearance amidst engine transients during a normal mission. Simulation results show that the control system exhibits minimal variability in clearance control performance across the operating envelope. The final actuator design is sufficiently small to fit within the limited space outside the high-pressure turbine case and is shown to consume only small amounts of bleed air to adequately regulate temperature.

DeCastro, Jonathan A.↗

Progress on Shape Memory Alloy Actuator Development for Active Clearance Control

Results of a numerical analysis evaluating the feasibility of high-temperature shape memory alloys (HTSMA) for active clearance control actuation in the high-pressure turbine section of a modern turbofan engine has been conducted. The prototype actuator concept considered here consists of parallel HTSMA wires attached to the shroud that is located on the exterior of the turbine case. A transient model of an HTSMA actuator was used to evaluate active clearance control at various operating points in a test bed aircraft engine simulation. For the engine under consideration, each actuator must be designed to counteract loads from 380 to 2000 lbf and displace at least 0.033 in. Design results show that an actuator comprised of 10 wires 2 in. in length is adequate for control at critical engine operating points and still exhibit acceptable failsafe operability and cycle life. A proportional-integral-derivative (PID) controller with integrator windup protection was implemented to control clearance amidst engine transients during a normal mission. Simulation results show that the control system exhibits minimal variability in clearance control performance across the operating envelope. The final actuator design is sufficiently small to fit within the limited space outside the high-pressure turbine case and is shown to consume only small amounts of bleed air to adequately regulate temperature.

DeCastro, Jonathan↗

Analysis of a turning point problem in flight trajectory optimization

The optimal control policy for the aeroglide portion of the minimum fuel, orbital plane change problem for maneuvering entry vehicles is reduced to the solution of a turning point problem for the bank angle control. For this problem a turning point occurs at the minimum altitude of the flight, when the flight path angle equals zero. The turning point separates the bank angle control into two outer solutions that are valid away from the turning point. In a neighborhood of the turning point, where the bank angle changes rapidly, an inner solution is developed and matched with the two outer solutions. An asymptotic analysis of the turning point problem is given, and an analytic example is provided to illustrate the construction of the bank angle control.

Gracey, C.↗

Effects of grain morphology, microstructure and dispersed metal cocatalyst on the photoreduction of water over impurity-doped LaInO{sub 3}

Graphical abstract: Grain morphology, doping of an impurity, microstructure, and metal/oxide contacts play a crucial role in the photocatalytic water decomposition activity of metal dispersed LaInO{sub 3}. Highlights: Black-Right-Pointing-Pointer LaInO{sub 3} displays two-step H{sub 2} evolution from UV-induced photoreduction of pure water. Black-Right-Pointing-Pointer Preparation-controlled particle morphology plays a key role in photoactivity. Black-Right-Pointing-Pointer Doping-induced activity enhancement relates to inter-bandgap charge trapping states. Black-Right-Pointing-Pointer Dispersion and metal/oxide contacts may govern the performance of a cocatalyst. -- Abstract: The single phase lanthanum indates doped with Ga (for La) and N (for O), i.e. La{sub 1-x}Ga{sub x}InO{sub 3} (0 {<=} x {<=} 0.2) and LaInO{sub 1-y}N{sub y} (y {approx} 0.6), exhibit significant activity for photoreduction of water; the yield of H{sub 2} produced depending on dopant, excitation source, and addition of a sacrificial reagent. The two-step H{sub 2} evolution observed for this reaction corresponds with the two distinct absorbance regimes displayed by these materials, one in UV-region due to bandgap excitation and the other in visible region arising from the transitions involving sub-bandgap donor or acceptor energy states. The photocatalytic activity of these d{sup 10} metal oxides increases on coating with a metal/metal oxide co-catalyst, gold exhibiting superior activity to Pt and NiO, irrespective of excitation source and sample composition. The preparation-controlled particle morphology, doping-induced lattice imperfections, and metal/semiconductor hetero-junctions are envisaged to play a key role in the absorption characteristics and photocatalytic water reduction activity of metal/LaInO{sub 3} nanocomposites.

36 MATERIALS SCIENCE↗

Convergence Rate of Model Reference Adaptive Control with Application to Building HVAC Systems

Model reference adaptive control (MRAC) has been studied for decades and successfully applied in multiple areas, including heating, ventilation, and air conditioning (HVAC) systems for buildings. MRAC is efficient in capturing the time-varying characteristics of buildings' indoor temperatures and outdoor weather environments. In this paper, the rate of convergence of MRAC is investigated, where a direct adaptive control with temperature set point reference tracking is used to regulate the indoor temperatures for buildings. Numerical results show that by controlling the HVAC systems of residential buildings using MRAC, the indoor temperatures converge Q-sublinearly to the desired temperature set points. In addition, the rate of convergence for MRAC is compared with a baseline adaptive model-free control method.

Wu, Tumin↗

Tetracopper σ‐Bound μ ‐Acetylide and ‐Diyne Units Stabilized by a Naphthyridine‐based Dinucleating Ligand

Abstract Reactions of a dicopper(I) tert ‐butoxide complex with alkynes possessing boryl or silyl capping groups resulted in formation of unprecedented tetracopper(I) μ ‐acetylide/diyne complexes that were characterized by NMR and UV/Vis spectroscopy, mass spectrometry and single‐crystal X‐ray diffraction. These compounds possess an unusual μ 4 ‐ η 1 : η 1 : η 1 : η 1 coordination mode for the bridging organic fragment, enforced by the rigid and dinucleating nature of the ligand utilized. Thus, the central π system remains unperturbed and accessible for subsequent reactivity and modification. This has been corroborated by addition of a fifth copper atom, giving rise to a pentacopper acetylide complex. This work may provide a new approach by which metal‐metal cooperativity can be exploited in the transformation of acetylide and diyne groups to a variety of substrates, or as a starting point for the controlled synthesis of copper(I) alkyne‐containing clusters.

Ríos, Pablo↗

Tetracopper σ‐Bound μ ‐Acetylide and ‐Diyne Units Stabilized by a Naphthyridine‐based Dinucleating Ligand

Abstract Reactions of a dicopper(I) tert ‐butoxide complex with alkynes possessing boryl or silyl capping groups resulted in formation of unprecedented tetracopper(I) μ ‐acetylide/diyne complexes that were characterized by NMR and UV/Vis spectroscopy, mass spectrometry and single‐crystal X‐ray diffraction. These compounds possess an unusual μ 4 ‐ η 1 : η 1 : η 1 : η 1 coordination mode for the bridging organic fragment, enforced by the rigid and dinucleating nature of the ligand utilized. Thus, the central π system remains unperturbed and accessible for subsequent reactivity and modification. This has been corroborated by addition of a fifth copper atom, giving rise to a pentacopper acetylide complex. This work may provide a new approach by which metal‐metal cooperativity can be exploited in the transformation of acetylide and diyne groups to a variety of substrates, or as a starting point for the controlled synthesis of copper(I) alkyne‐containing clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plackett-Burman experimental design to facilitate syntactic foam development

The use of an eight-experiment Plackett–Burman method can assess six experimental variables and eight responses in a polysiloxane-glass microsphere syntactic foam. The approach aims to decrease the time required to develop a tunable polymer composite by identifying a reduced set of variables and responses suitable for future predictive modeling. The statistical design assesses the main effects of mixing process parameters, polymer matrix composition, microsphere density and volume loading, and the blending of two grades of microspheres, using a dummy factor in statistical calculations. Responses cover rheological, physical, thermal, and mechanical properties. The cure accelerator content of the polymer matrix and the volume loading of the microspheres have the largest effects on foam properties. These factors are the most suitable for controlling the gel point of the curing foam, and the density of the cured foam. The mixing parameters introduce widespread variability and therefore should be fixed at effective levels during follow-up testing. Some responses may require greater contrast in microsphere-related factors. As a result, compared to other possible statistical approaches, the run economy of the Plackett–Burman method makes it a valuable tool for rapidly characterizing new foams.

36 MATERIALS SCIENCE↗

Thermal Links and Microstrip Transmission Lines in SPT-3G Bolometers

In this work, we have measured the properties of membrane-suspended bolometer thermal links and microstrip transmission lines in the transition-edge sensor arrays for the third-generation camera for South Pole Telescope (SPT-3G). A promising technique for controlling the end point of the release etch that defines the thermal link has been developed. We have also evaluated the microstrip loss in our detectors by measuring the optical efficiency of detectors with different lengths of microstrip line. The loss tangent is sufficiently low for the use in multi-chronic pixels for cosmic microwave background instruments like SPT-3G.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Isolated oxygen vacancies in strontium titanate shine red: Optical identification of Ti 3+ polarons

Oxide perovskites exhibit fascinating physical properties that identify them as key materials for the next generation of oxide-based functional electronic devices, as well as for catalysis and photochemistry applications. In strontium titanate, substantial efforts have been devoted to elucidate the role of oxygen vacancies and localized electronic states, such as polarons, on those properties. In this paper, a new model is presented that assigns a definitive red luminescence signature at 2.0 eV to Ti 3+ polarons trapped at isolated oxygen vacancies. This emission provides an unequivocal identification for the oxygen vacancies, which allows monitoring their creation and annealing by a variety of physio-chemical treatments. Ionoluminescence with energetic (MeV) ion beams enables such identification by combining the sensitivity and resolution of spectroscopic techniques with their in situ character, as well as controlled incorporation of point defects, such as oxygen vacancies. Alternative models assigning the blue luminescence emission at 2.8 eV to oxygen vacancies are not supported by the experimental results. Finally and therefore, oxygen vacancies shine red and not blue, as previously proposed.

36 MATERIALS SCIENCE↗