Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “persistence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

MgO Nanostructures on Au(111) as Catalysts for Low-Temperature Methane Activation and C-C Coupling

The selective conversion of methane (CH4) under mild conditions remains challenging due to strong C-H bonds and catalyst coking. We systematically investigated sub-monolayer MgO nanostructures on Au(111), where two-dimensional (2D) MgO islands with stable Mg-O-Au interfaces catalyze low-temperature CH4 activation and C-C coupling. Upon CH4 exposure at 300 K, surface-bound CHx and C2Hx intermediates formed and persisted post-evacuation, indicating robust CHx-O-Mg linkages. Temperature-programmed studies revealed that C-H activation and C-C coupling intensify with heat: the CHx signal grew continuously while the C2Hx signal reached a plateau at 400-500 K. O 1s and Mg 2p attenuation confirmed adsorption of the hydrocarbons on MgO. Catalytic tests at 500 K yielded C2H6 (70%) and C2H4 (30%) without coking, underscoring MgO's role as an active catalyst. These results offer new design principles for developing coke-resistant and low-temperature methane upgrading catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantifying the Reactivity of Isolated Li x Si Domains in Si Anodes Using Operando NMR

The use of Si anodes can greatly improve the energy density of Li-ion batteries. However, understanding and mitigation of calendar aging remains a barrier to commercialization. Here, in this short report, we utilize operando Nuclear Magnetic Resonance (NMR) spectroscopy to detect and quantify lithium silicides (Li x Si) as they form and react within Si anodes in pouch cells during calendar aging. We provide direct experimental evidence of complex aging phenomena in the Si anodes, including both SEI growth and dissolution during storage. Formation of electrochemically isolated Li x Si is also observed, as indicated by the partial persistence of highly lithiated phases after the cell is discharged. Remarkably, we show that these isolated domains can themselves self-discharge over time, suggesting that their detection can be challenging in post-mortem studies. Finally, we show that aging outcomes depend heavily on the type of silicon particles contained within the electrode, and that certain surface coatings can help decrease the reactivity between lithium silicides and the electrolyte.

Li-ion battery↗
DOE OSTI2021

Atomic Force Microscopy and Infrared Nanospectroscopy of COVID-19 Spike Protein for the Quantification of Adhesion to Common Surfaces

The COVID-19 pandemic has claimed millions of lives worldwide, sickened many more, and has resulted in severe socio-economic consequences. As society returns to normal, understanding the spread and persistence of SARS CoV-2 on commonplace surfaces can help to mitigate future outbreaks of coronaviruses and other pathogens. We hypothesize that such an understanding can be aided from studying the binding and interaction of viral proteins with non-biological surfaces. Here, we propose a methodology for investigating the adhesion of the SARS CoV-2 spike glycoprotein on common inorganic surfaces such as aluminum-, copper-, iron-, silica-, and ceria-oxides as well as metallic gold. Quantitative adhesion was obtained from the analysis of measured forces at the nanoscale using an atomic force microscope operated under ambient conditions. Without imposing further constraints on the measurement conditions, our preliminary findings suggest that spike glycoproteins interact with similar adhesion forces across the majority of the metal oxides tested with the exception to gold, for which attraction forces ~10 times stronger than all other materials studied were observed. Ferritin, which was used as a reference protein, was found to exhibit similar adhesion forces as SARS CoV-2 spike protein. Further, this study results show that glycoprotein adhesion forces for similar ambient humidity, tip shape, and contact surface are non-specific to the properties of metal oxide surfaces, which are expected to be covered by a thin water film. The findings suggest that at ambient conditions glycoprotein adhesion to metal oxides is primarily controlled by the water capillary forces and they depend on the surface tension of the liquid (water). We discuss further strategies warranted to decipher the intricate nanoscale forces for improved quantification of the adhesion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Sculpting 2D Crystals via Membrane Contractions before and during Solidification

When phospholipids crystallize within the otherwise fluid membranes of giant unilamellar vesicles, the resulting molecularly thin “2D” solids exhibit great variety in their morphology evolution. For example, within membranes containing moderate amounts of the crystallizing component, crystals grow with a fixed morphology depending on vesicle size. Conversely for membranes containing large amounts of the crystallizing species, we find small compact crystals on vesicles of all sizes. However, on large vesicles, growing crystals sprout flower petals that lengthen progressively. These behaviors result from two combined mechanisms: first, like other 2D solids, the shear rigidity of phospholipid crystals renders them intolerant to morphologies with nonzero Gaussian curvature. As a result and especially at elevated membrane tension, the cost of bending elasticity is reduced at the expense of line energy by the formation of flowers as opposed to compact crystals. Second, the composition-dependent tension rise during cooling relaxes via water permeation of the membrane with a time constant scaling as R2. The amount of crystal formed for a small decrease in temperature determines this composition-dependent increase in stress from thermal contractions versus solidification. Surface Evolver computations were motivated using the predicted tension evolution to develop a processing space that maps to experimental observations for initial and growing crystal morphology. Important variable groups are identified, including a scaled ratio of bending to line energy, a vesicle-size-independent group for membrane contractions, and a time constant for stress relaxation. Though processing stresses ultimately relax, the crystal morphology persists well beyond the processing window.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Polymer Conformations and Diffusion Through a Monolayer of Confining Nanoparticles

We present coarse-grained molecular dynamics simulations to probe chain-scale polymer conformations and diffusion between confining nanoparticles (NPs). By constructing a monolayer of hexagonally-packed NPs in a polymer melt with athermal interactions, we observe the magnitude and length-scale over which homogeneously confining NPs impact the polymer behavior, which provides fundamental insights into more complex polymer nanocomposites. We show that polymer conformations are more perturbed under strong confinement (i.e. when the interparticle distance, ID, is less than twice the polymer radius of gyration, 2R g ) as compared to around an isolated NP, and the effect depends on the ratio of R NP /R g rather than either independently. In fact, these conformations can be quantitatively replicated by executing a simple random walk in a similarly confining environment. We also show that polymer diffusion is slowed by the presence of NPs and the slowing persists far beyond the length-scale over which polymer conformations are perturbed. Although the slowing is strongest ~R g from the NPs, the diffusion coefficient is slower even beyond ~5R g from the NPs. Furthermore, by analyzing the directional van Hove distributions, we show polymer diffusion away from the NP monolayer is bulk-like while diffusion through the monolayer is slower with increasing NP confinement. Furthermore, these molecular dynamics simulations provide fundamental insights into the temporal and spatial effect of confining, athermal NPs on chain-scale polymer conformations and diffusion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Using Grazing-Incidence Small-Angle Neutron Scattering to Study the Orientation of Block Copolymer Morphologies in Thin Films

Here, we used grazing-incidence small-angle neutron scattering (GISANS) to probe the depth-dependent orientation of self-assembled morphologies of block copolymers. A hydrophobic–hydrophobic block copolymer, poly(solketal methacrylate)-block-polystyrene (PSM-b-PS), was synthesized and spin-coated into films tens of nanometers in thickness where the polymers adopted a disordered state. PSM-b-PS was then hydrolyzed by exposing the polymer thin film to trifluoroacetic acid vapor or embedding a photoacid generator in the film during spin coating, followed by exposure to UV light. The hydrolysis converted the block copolymer into a hydrophilic–hydrophobic block copolymer, poly(glycerol monomethacrylate)-block-polystyrene (PGM-b-PS), significantly increasing the segmental interaction parameter (χ) and causing microphase separation of the copolymers. GISANS was used to study the depth-dependent structure of the films and revealed that the orientation of the microphase-separated structure differed at the polymer–air and polymer–substrate interfaces. In the regions where the lamellae were parallel to the interfaces, the orientation propagated into the film from the interfaces. However, in the areas where the lamellae were perpendicular to the interfaces, the orientation did not persist with increasing distance from the interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Engineering Self-Assembled Domain Asymmetry in Solvent Vapor Annealed Block Copolymer–Homopolymer Blend Films

Thin-film block copolymer (BCP) self-assembly is a powerful approach to generate highly uniform nanopatterns across large areas, yet the symmetries of these nanopatterns are constrained by the relative volume occupied by each polymer block. Here, we present a conceptually new approach to circumvent this limitation by combining homopolymer (HP) blending with solvent vapor annealing (SVA), demonstrated here for ternary blends of a near-symmetric BCP with athermal, low molar mass HPs. Screening of BCP–HP interactions by a weakly selective solvent promotes entropically driven delocalization of HP throughout both blocks and enables assembly of metastable lamellae for volume fractions as high as 0.78. Subsequent brief thermal annealing induces HPs to withdraw to their enthalpically favored domains, sharpening domain interfaces on a time scale much shorter than pattern coarsening. This renders lamellar nanopatterns with tunable widths that can be transferred to other materials with high fidelity. Furthermore, the persistence of the metastable asymmetric lamellae upon thermal annealing is sensitive to film confinement, as they are preserved in submonolayer films but transition to horizontal cylinders in films more than one monolayer thick. SVA using a strongly selective solvent results in assembled morphologies aligned closely with expectations based on the total polymer blend composition, underscoring the key role of BCP–HP interactions in dictating domain asymmetry. Overall, this work details important principles for using SVA to mediate BCP–HP interactions in thin films, thereby presenting opportunities to engineer pathways for the assembly of well-ordered nanopatterns with designer feature asymmetry for lithographic or nanotexturing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Uncovering Backbone Conformation for Rigid DPP-Based Donor–Acceptor Conjugated Polymer Using Deuterium Labeling and Neutron Scattering

The conjugated polymer’s backbone conformation dictates the delocalization of electrons, ultimately affecting its optoelectronic properties. Most conjugated polymers can be viewed as semirigid rods with their backbone embedded among long alkyl side chains. Thus, it is challenging to experimentally quantify the conformation of a conjugated backbone. Here, we performed contrast variation neutron scattering on rigid conjugated donor–acceptor (D–A) diketopyrrolopyrrole (DPP) polymers with selectively deuterated side chains to measure the conjugated backbone conformation. We first synthesized DPPbased polymers with deuterated side chains, confirmed by NMR and FTIR. Using contrast variation neutron scattering, we found that the DPP-based conjugated polymers are much more rigid than poly(3-alkylthiophenes), with persistence length (L p ) at 16–18 nm versus 2–3 nm. More importantly, in contrast to the relatively flexible poly(3-alkylthiophenes) whose backbone is more flexible than the whole polymer, we found that the backbone of DPP-based polymers has the same L p value compared to the whole polymer chain. This indicates that side chain interference on backbone conformation is not present for the semirigid polymer, which is further confirmed by coarse-grained molecular dynamics (CG-MD) simulations. Our work provides a novel protocol to probe polymer’s backbone conformation and paradigm-shifting understanding of the backbone conformation of semirigid conjugated polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers

The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender Xray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor−acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴- diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effects of Concentration, Salinity and Temperature on the Conformations of Zwitterionic Poly(2-Vinylpyridine- N -Oxide) Chains in Semidilute Solutions Probed by Small-Angle X-Ray and Neutron Scattering

Polyzwitterions, composed of repeating units with equal numbers of anionic and cationic groups, have drawn considerable interest for applications ranging from antimicrobial coatings and antifouling membranes to low-friction interfaces, energy storage media, and actuators. A characteristic feature of many polyzwitterions is the anti-polyelectrolyte effect salt-induced chain expansion in aqueous solution a phenomenon often implicated in their functional behavior. In this study, we investigated the conformational behavior of poly(2-vinylpyridine-N-oxide) (P2VPNO) using smallangle X-ray and neutron scattering (SAXS and SANS). Small-angle X-ray scattering (SAXS) revealed that, in salt-free aqueous solution, P2VPNO adopts an expanded wormlike conformation stabilized by hydration. With increasing concentration, the chains contract due to screening of intrachain excluded-volume interactions, qualitatively consistent with de Gennes’ scaling predictions for neutral polymers. Small-angle neutron scattering (SANS) further demonstrated that P2VPNO exhibits the characteristic anti-polyelectrolyte response to added salt, as observed in many other polyzwitterions. At elevated temperatures, chain flexibility increases, leading to a shorter Kuhn length and reduced radius of gyration. Notably, however, salt-induced chain expansion persists, indicating that the anti-polyelectrolyte effect remains operative under elevated thermal conditions. These findings provide the first experimental evidence of scaling behavior in polyzwitterions, as well as the first observation of their altered antipolyelectrolyte response at elevated temperatures, offering new insights into the solution physics of this important class of polymers.

Conformation↗
DOE OSTI2021

Proximate Quantum Spin Liquid on Designer Lattice

Complementary to bulk synthesis, here we propose a designer lattice with extremely high magnetic frustration and demonstrate the possible realization of a quantum spin liquid state from both experiments and theoretical calculations. In an ultrathin (111) CoCr 2 O 4 slice composed of three triangular and one kagome cation planes, the absence of a spin ordering or freezing transition is demonstrated down to 0.03 K, in the presence of strong antiferromagnetic correlations in the energy scale of 30 K between Co and Cr sublattices, leading to the frustration factor of similar to 1000. Persisting spin fluctuations are observed at low temperatures via low-energy muon spin relaxation. Our calculations further demonstrate the emergence of highly degenerate magnetic ground states at the 0 K limit, due to the competition among multiply altered exchange interactions. Furthermore, these results collectively indicate the realization of a proximate quantum spin liquid state on the synthetic lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Morphological Transitions of a Photoswitchable Aramid Amphiphile Nanostructure

Self-assembly of small amphiphilic molecules in water can lead to nanostructures of varying geometries with pristine internal molecular organization. Here we introduce a photoswitchable aramid amphiphile (AA), designed to exhibit extensive hydrogen bonding and robust mechanical properties upon self-assembly, while containing a vinylnitrile group for photoinduced cis-trans isomerization. We demonstrate spontaneous self-assembly of the vinylnitrile-containing AA in water to form nanoribbons. Upon UV irradiation, trans-to-cis isomerizations occur concomitantly with a morphological transition from nanoribbons to nanotubes. The nanotube structure persists in water for over six months, stabilized by strong and collective intermolecular interactions. We demonstrate that the nanoribbon-to-nanotube transition is reversible upon heating and that switching between states can be achieved repeatedly. Finally, we use electron microscopy to capture the transition and propose mechanisms for nanoribbon-to-nanotube rearrangement and vice versa. This stability and switchability of photoresponsive AA nanostructures make them viable for a range of future applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Long-Range Dipole–Dipole Interactions in a Plasmonic Lattice

Spontaneous emission of quantum emitters can be enhanced by increasing the local density of optical states, whereas engineering dipole-dipole interactions requires modifying the two-point spectral density function. Here, we experimentally demonstrate long-range dipole-dipole interactions (DDIs) mediated by surface lattice resonances in a plasmonic nanoparticle lattice. Using angle-resolved spectral measurements and fluorescence lifetime studies, we show that unique nanophotonic modes mediate long-range DDI between donor and acceptor molecules. We observe significant and persistent DDI strengths for a range of densities that map to similar to 800 nm mean nearest-neighbor separation distance between donor and acceptor dipoles, a factor of similar to 100 larger than free space. Here, our results pave the way to engineer and control long-range DDIs between an ensemble of emitters at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Accelerated Degradation in a Quasi-Single-Crystalline Layered Oxide Cathode for Lithium-Ion Batteries Caused by Residual Grain Boundaries

The rapidly growing demand of electrical vehicle (EV) requires high-energy-density lithium-ion batteries (LIBs) with excellent cycling stability and safety performance. However, conventional polycrystalline high-Ni cathodes severely suffer from intrinsic chemo-mechanical degradation and fast capacity fade. The emerging single-crystallization strategy offers a promising pathway to improve the chemo-mechanical stability, however, the single-crystallinity of the cathode is not always guaranteed and residual grain boundaries (GBs) could persist in nonideal synthesis conditions, leading to the formation of ‘quasi’ single-crystalline (QSC) cathodes. So far, there is a lack of understanding of the influence of these residual GBs on the electrochemical performance and structural stability. Herein, we investigate the degradation pathway of a QSC high-Ni cathode through transmission electron microscopy and X-ray techniques. The residual GBs caused by insufficient calcination time, dramatically exacerbate the cathode’s chemo-mechanical instability and cycling performance. Our work offers important guidance for the next-generation cathodes for long-life LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Stable Supercapacity of Binder-Free TiO 2 (B) Epitaxial Electrodes for All-Solid-State Nanobatteries

Owing to its pseudocapacitive, unidimensional, rapid ion channels, TiO 2 (B) is a promising material for application to battery electrodes. In this study, we align these channels by epitaxially growing TiO 2 (B) films with the assistance of an isostructural VO 2 (B) template layer. In a liquid electrolyte, binder-free TiO 2 (B) epitaxial electrodes exhibit a supercapacity near the theoretical value of 335 mA h g –1 and an excellent charge–discharge reproducibility for ≥200 cycles, which outperform those of other TiO 2 (B) nanostructures. For the all-solid-state configuration employing the LiPON solid electrolyte, excellent stability persists. Our findings suggest excellent potential for miniaturizing all-solid-state nanobatteries in self-powered integrated circuits.

25 ENERGY STORAGE↗
DOE OSTI2023

Magnetic Field-Stabilized Wigner Crystal States in a Graphene Moiré Superlattice

ABC-stacked trilayer graphene on boron nitride (ABC-TLG/hBN) moiré superlattices provides a tunable platform for exploring Wigner crystal states in which the electron correlation can be controlled by electric and magnetic fields. Here, in this work, we report the observation of magnetic field-stabilized Wigner crystal states in a ABC-TLG/hBN. We show that correlated insulating states emerge at multiple fractional and integer fillings corresponding to ν = 1/3, 2/3, 1, 4/3, 5/3, and 2 electrons per moiré lattice site under a magnetic field. These correlated insulating states can be attributed to generalized Mott states for the integer fillings and generalized Wigner crystal states for the fractional fillings. The generalized Wigner crystal states are stabilized by a vertical magnetic field and are strongest at one magnetic flux quantum per three moiré superlattices. The ν = 2 insulating state persists up to 30 T, which can be described by a Mott–Hofstadter transition at a high magnetic field.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Protein-Enabled Size-Selective Defect-Sealing of Atomically Thin 2D Membranes for Dialysis and Nanoscale Separations

Atomically thin 2D materials present the potential for advancing membrane separations via a combination of high selectivity (from molecular sieving) and high permeance (due to atomic thinness). However, the creation of a high density of precise nanopores (narrow-size-distribution) over large areas in 2D materials remains challenging, and nonselective leakage from nanopore heterogeneity adversely impacts performance. Here, we demonstrate protein-enabled size-selective defect sealing (PDS) for atomically thin graphene membranes over centimeter scale areas by leveraging the size and reactivity of permeating proteins to preferentially seal larger nanopores (≥4 nm) while preserving a significant amount of smaller nanopores (via steric hindrance). Our defect-sealed nanoporous atomically thin membranes (NATMs) show stability up to ~35 days during size-selective diffusive separations with a model dialysis biomolecule fluorescein isothiocyanate (FITC)-Ficoll 70 in phosphate buffer saline (PBS) solution as well as outperform state-of-the-art commercially available dialysis membranes (molecular-weight-cutoff ~3.5–5 kDa and ~8–10 kDa) with significantly higher permeance for smaller solutes KCl (~0.66 nm) ~5.1–6 × 10 –5 ms –1 and vitamin B12 (B12, ~1.5 nm) ~2.8–4 × 10 –6 ms –1 compared to small protein lysozyme (Lz, ~4 nm) ~4–6.4 × 10 –8 m s –1 , thereby allowing unprecedented selectivity for B12/Lz ~70 and KCl/Lz ~1280. Our work introduces proteins as nanoscale tools for size-selective defect sealing in atomically thin membranes to overcome persistent issues and advance separations for dialysis, protein desalting, small molecule separations/purification, and other bioprocesses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗