Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Impact of Gender on Pharmocokinetics of Intranasal Scopolamine

Introduction: An intranasal gel dosage formulation of scopolamine (INSCOP) was developed for the treatment of Space Motion Sickness (SMS), which is commonly experienced by astronauts during space missions. The bioavailability and pharmacokinetics (PK) were evaluated under IND guidelines. Since information is lacking on the effect of gender on the PK of Scopolamine, we examined gender differences in PK parameters of INSCOP at three dose levels of 0.1, 0.2 and 0.4 mg. Methods: Plasma scopolamine concentrations as a function of time data were collected from twelve normal healthy human subjects (6 male/6 female) who participated in a fully randomized double blind crossover study. The PK parameters were derived using WinNonlin. Covariate analysis of PK profiles was performed using NONMEN and statistically compared using a likelihood ratio test on the difference of objective function value (OFV). Statistical significance for covariate analysis was set at P<0.05(ΔOFV=3.84). Results: No significant difference in PK parameters between male and female subjects was observed with 0.1 and 0.2 mg doses. However, CL and Vd were significantly different between male and female subjects at the 0.4 mg dose. Results from population covariate modeling analysis indicate that a onecompartment PK model with first-order elimination rate offers best fit for describing INSCOP concentration-time profiles. The inclusion of sex as a covariate enhanced the model fitting (ΔOFV=-4.1) owing to the genderdependent CL and Vd differences after the 0.4 mg dose. Conclusion: Statistical modeling of scopolamine concentration-time data suggests gender-dependent pharmacokinetics of scopolamine at the high dose level of 0.4 mg. Clearance of the parent compound was significantly faster and the volume of distribution was significantly higher in males than in females, As a result, including gender as a covariate to the pharmacokinetic model of scopolamine offers the best fit for PK modeling of the drug at dose of 0.4 mg or higher.

Putcha, L.↗

Sci—Thur AM: YIS - 11: Estimation of Bladder-Wall Cumulative Dose in Multi-Fraction Image-Based Gynaecological Brachytherapy Using Deformable Point Set Registration

Dosimetric parameters based on dose-volume histograms (DVH) of contoured structures are routinely used to evaluate dose delivered to target structures and organs at risk. However, the DVH provides no information on the spatial distribution of the dose in situations of repeated fractions with changes in organ shape or size. The aim of this research was to develop methods to more accurately determine geometrically localized, cumulative dose to the bladder wall in intracavitary brachytherapy for cervical cancer. The CT scans and treatment plans of 20 cervical cancer patients were used. Each patient was treated with five high-dose-rate (HDR) brachytherapy fractions of 600cGy prescribed dose. The bladder inner and outer surfaces were delineated using MIM Maestro software (MIM Software Inc.) and were imported into MATLAB (MathWorks) as 3-dimensional point clouds constituting the “bladder wall”. A point-set registration toolbox for MATLAB, Coherent Point Drift (CPD), was used to non-rigidly transform the bladder-wall points from four of the fractions to the coordinate system of the remaining (reference) fraction, which was chosen to be the emptiest bladder for each patient. The doses were accumulated on the reference fraction and new cumulative dosimetric parameters were calculated. The LENT-SOMA toxicity scores of these patients were studied against the cumulative dose parameters. Based on this study, there was no significant correlation between the toxicity scores and the determined cumulative dose parameters.

60 APPLIED LIFE SCIENCES↗

Radiative detached divertor with acceptable separatrix Z eff

The feasibility study is performed for the radiative detached divertor (RDD) concept, which characterizes a variety of detached plasmas with impurity amounts providing the highest levels of divertor radiation without X-point MARFE (XPM), based on a set of restrictive criteria for the leading plasma parameters (LPPs) including, e.g., tolerable peak power loads below 1 MW/m2, low separatrix densities, allowable impurity concentrations, and acceptable Z eff values for a DIII-D like tokamak. For this, extensive simulations with the 2-D edge plasma transport code were done scanning the deuterium and impurity inventories practically for all impurity elements from beryllium to neon and the analysis of LPP variations in these scans is presented. It is shown that, for a given D inventory, the total radiation fraction with an increase in the impurity inventory reaches a flat top level, f rad = 0.85 ± 0.01, whereas the higher f rad corresponds to XPM. This critical fraction is the same for all elements and values of the D inventory. Successful RDD solutions with a flat top radiation meeting all ad hoc LPP criteria are found for some elements. Boron and nitrogen are shown to be the most promising elements for seeding, since they are capable of providing alone the successful RDD at the lowest concentrations. Several important effects on impurity radiation are considered including: cross-field impurity transport in regions with strong temperature gradients, multi-species thermal force, charge-exchange of impurity ions with D atoms originating from recombination, impurity entrainment by parallel flows, flows caused by inner/outer divertor asymmetries, and Mach &sim; 1 flows reached inside radiation-ionization fronts. The impurity radiation profiles of various elements are analyzed suggesting three patterns differing in the radiation front position with respect to the D ionization source. The modeled relocation of D from the pedestal into divertor regions; an enhanced pedestal enrichment for impurities with high first ionization potential; and RDD capability of confining inside the divertors the large D inventories as neutral atoms, are considered as effects of increasing impurity inventory. The responses of a flat-top RDD to the input parameters variation are studied. For example, dependencies of LPPs on the input power increase, which express the sharp and even bifurcation transitions between two distinct branches corresponding to the detached and attached divertors, are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Regulation of the Adrenal Cortex Function During Stress

A proposal to study the function of the adrenal gland in the rat during stress is presented. In the proposed project, three different phases of experimentation will be undertaken. The first phase includes establishment of the circadian rhythm of both brain amines and glucocoticoids, under normal conditions and under chronic and acute stressful conditions. The second phase includes the study of the pharmacokinetics of glucocorticoid binding under normal and stress conditions. The third phase includes brain uptake and binding under different experimental conditions. In the outlined experiments brain biogenic amines will be evaluated, adrenal functions will be measured and stress effect on those parameters will be studied. It is hoped that this investigation can explain some of the complex relationships between the brain neurotransmitter and adrenal function.

Soliman, K. F. A.↗

Thermoluminescence of Antarctic meteorites: A rapid screening technique for terrestrial age estimation, pairing studies and identification of specimens with unusual prefall histories

Thermoluminescence (TL) is a promising technique for rapid screening of the large numbers of Antarctic meteorites, permitting identification of interesting specimens that can then be studied in detail by other, more definite techniques. Specifically, TL permits determination of rough terrestrial age, identification of potential paired groups and location of specimens with unusual pre-fall histories. Meteorites with long terrestrial ages are particularly valuable for studying transport and weathering mechanisms. Pairing studies are possible because TL variations among meteorites are large compared to variations within individual objects, especially for natural TL. Available TL data for several L3 fragments, three of which were paired by other techniques, are presented as an example of the use of TL parameters in pairing studies. Additional TL measurements, specifically a blind test, are recommended to satisfactorily establish the reliability of this pairing property. The TL measurements also identify fragments with unusual pre-fall histories, such an near-Sun orbits.

Sutton, S. R.↗

The NASA NEESPI Data Portal to Support Studies of Climate and Environmental Changes in Non-Boreal Europe

NASA NEESPI (Northern Eurasia Earth Science Partnership Initiative) data portal is a NASA funded project that focuses on collecting satellite remote sensing data, providing tools, information, and services in support of NEESPI scientific objectives (Leptoukh, et al., 2007). The data can be accessed online through anonymous ftp, through an advanced data searching and ordering system Mirador that uses keywords to find data quickly in a Google-like interface, and through the Goddard Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni). The portal provides preprocessed data from different satellite sensors and numerical models to the same spatial and temporal resolution and the same projection so that the data can be used easily to perform inter-comparison or relationship studies. In addition, it provides parameter and spatially subsetted data for regional studies. Studies of regional carbon, hydrology, aerosols in non-boreal Europe and their interactions with global climate are very challenging research topics. The NASA NEESPI data portal makes many satellite data available for such studies, including information on land cover types, fire, vegetation index, aerosols, land surface temperature, soil moisture, precipitation, snow/ice, and other parameters. This paper will introduce the features and products available in the system, focusing on the online data 1 tool, Giovanni NEESPI. An example that explores different data through Giovanni NEESPI in temperate region of non-boreal Europe will be presented.

Shen, Suhung↗

Simulated effect of edge plasma density parameters on lower hybrid wave scattering in EAST

The incorporation of lower hybrid (LH) wave spectrum broadening in the poloidal wavenumber (⁠k θ ) space at the last close field surface (LCFS) is reported to lead to better agreement of the modeled LH wave current profile with the experimental results [Baek et al., Nucl. Fusion 61, 106034 (2021)]. To further understand its underlying mechanism and find the possible influence factors, effects of wave scattering caused by drift-wave type density fluctuation on the probability distribution of the LH wave polar refractive index (⁠N θ ) at the LCFS are studied under density parameters in the scrape-off-layer. According to a scattering model [P. T. Bonoli and E. Ott, Phys Fluids 25(2), 359–375 (1982)], scattering probability and scattering angle distribution are two main factors that determine the degree of spectral broadening. Studies presented here show that the total scattering probability increases first and then decreases as the wave propagates toward a smaller normalized radius of poloidal magnetic flux (⁠ρ⁠). The degree of spectral broadening is found to depend on the density and density fluctuation together by changing the intensity and a proportion of the geometrical optics approximation term and the E×B drift term in the scattering model. Additionally, the fluctuation correlation length can significantly modify the probability distribution of N θ at the LCFS, which is found to significantly change the LH wave current profile.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of electron current extraction from a radio frequency plasma cathode designed as a neutralizer for ion source applications

Plasma cathodes are insert free devices that are developed to be employed as electron sources in electric propulsion and ion source applications as practical alternatives to more commonly used hollow cathodes. Inductively coupled plasma cathodes, or Radio Frequency (RF) plasma cathodes, are introduced in recent years. Because of its compact geometry, and simple and efficient plasma generation, RF plasma source is considered to be suitable for plasma cathode applications. In this study, numerous RF plasma cathodes have been designed and manufactured. Experimental measurements have been conducted to study the effects of geometric and operational parameters. Experimental results of this study show that the plasma generation and electron extraction characteristics of the RF plasma cathode device strongly depend on the geometric parameters such as chamber diameter, chamber length, orifice diameter, orifice length, as well as the operational parameters such as RF power and gas mass flow rate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Poisson method application to the assessment of the earthquake hazard in the North Anatolian Fault Zone, Turkey

North Anatolian Fault (NAF) is one from the most important strike-slip fault zones in the world and located among regions in the highest seismic activity. The NAFZ observed very large earthquakes from the past to present. The aim of this study; the important parameters of Gutenberg-Richter relationship (a and b values) estimated and this parameters taking into account, earthquakes were examined in the between years 1900-2015 for 10 different seismic source regions in the NAFZ. After that estimated occurrence probabilities and return periods of occurring earthquakes in fault zone in the next years, and is being assessed with Poisson method the earthquake hazard of the NAFZ. The Region 2 were observed the largest earthquakes for the only historical period and hasn’t been observed large earthquake for the instrumental period in this region. Two historical earthquakes (1766, M{sub S}=7.3 and 1897, M{sub S}=7.0) are included for Region 2 (Marmara Region) where a large earthquake is expected in the next years. The 10 different seismic source regions are determined the relationships between the cumulative number-magnitude which estimated a and b parameters with the equation of LogN=a-bM in the Gutenberg-Richter. A homogenous earthquake catalog for M{sub S} magnitude which is equal or larger than 4.0 is used for the time period between 1900 and 2015. The database of catalog used in the study has been created from International Seismological Center (ISC) and Boğazici University Kandilli observation and earthquake research institute (KOERI). The earthquake data were obtained until from 1900 to 1974 from KOERI and ISC until from 1974 to 2015 from KOERI. The probabilities of the earthquake occurring are estimated for the next 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 years in the 10 different seismic source regions. The highest earthquake occur probabilities in 10 different seismic source regions in the next years estimated that the region Tokat-Erzincan (Region 9) %99 with an earthquake occur probability for magnitude 6.5 which the return period 24.7 year, %92 with an earthquake occur probability for magnitude 7 which the return period 39.1 year, %80 with an earthquake occur probability for magnitude 7.5 which the return period 62.1 year, %64 with an earthquake occur probability for magnitude 8 which the return period 98.5 year. For the Marmara Region (Region 2) in the next 100 year estimated that %89 with an earthquake occur probability for magnitude 6 which the return period 44.9 year, %45 with an earthquake occur probability for magnitude 6.5 which the return period 87 year, %45 with an earthquake occur probability for magnitude 7 which the return period 168.6 year.

58 GEOSCIENCES↗

Scaling laws in high-energy inverse Compton scattering

Based upon the rate equations for the photon distribution function obtained in the previous paper, we study the inverse Compton scattering process for high-energy nonthermal electrons. Assuming the power-law electron distribution, we find a scaling law in the probability distribution function P{sub 1}(s), where the peak height and peak position depend only on the power-index parameter. We solved the rate equation analytically. It is found that the spectral intensity function also has the scaling law, where the peak height and peak position depend only on the power-index parameter. The present study will be particularly important to the analysis of the X-ray and gamma-ray emission models from various astrophysical objects such as radio galaxies and supernova remnants.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Data for “Fast-decaying plant litter enhances soil carbon in temperate forests, but not through microbial physiological traits”

This data package contains data and code used in the paper “Fast-decaying plant litter enhances soil carbon in temperate forests, but not through microbial physiological traits”. This paper details results from two studies: 1) a laboratory leaf litter incubation experiment (lab experiment) and 2) a multi-site observational field study (field study). Both studies were designed to test the relationships among litter quality, microbial physiological traits, and mineral-associated soil carbon (C). In the lab experiment, we incubated 16 temperate tree litters of differing chemical quality with isotopically distinct soil, measuring microbial physiological traits and the flow of litter-derived C into the mineral-associated soil C pool. In the field study, we sampled soils (0-5 cm) across six eastern US temperate forests, measuring microbial physiological traits, soil abiotic properties, and leaf litter chemistry. The analysis data are provided in two .csv files corresponding to either the lab experiment or field study. Both files contain data on litter chemistry, microbial physiological traits (growth and turnover rates, and carbon use efficiency [CUE]), and the mineral-associated soil C pool. The lab experiment dataset additionally contains litter-derived versus soil-derived soil C, respiration, and litter decomposition parameters. The field study dataset additionally contains site-level climatic information, ectomycorrhizal dominance of plots, and plot-level soil properties. Also provided is the R code and output reproducing the results in the related publication. Analyses were originally performed using R version 3.6.1 using the package "lavaan" and the packages listed on lines 5-7 in the file "data.R".

54 ENVIRONMENTAL SCIENCES↗

Incorporating Microtopography in a Land Surface Model and Quantifying the Effect on the Carbon Cycle

Abstract Northern peatlands are a terrestrial carbon store, with an annual sink of 0.1 Pg C yr −1 and a total storage estimate of 547 Pg C. Northern peatlands are also major contributors of atmospheric methane. Most land surface models do not accurately represent peatland carbon emissions, partly because they do not represent the hydrologic cycle and/or microtopography adequately. Interactions between water table depth and microtopography in peatlands influence decomposition and modulate CO 2 and CH 4 fluxes. A modified version of the land surface component of the Energy Exascale Earth System Model, was recently created to represent the microtopography and hydrology of a raised dome bog in northern Minnesota, USA. In this study, three microtopographic parameters are analyzed in the modified version: hummock height, hummock‐hollow spacing, and percent hollow. Terrestrial laser scanning observations are used to set uncertainty bounds for these parameters. Our model experiment results suggest that carbon‐related quantities of interest (QOI) were typically the most sensitive to hummock height, and those QOI (especially net ecosystem exchange, NEE) were sensitive to interactions between parameters. Furthermore, NEE was most relatively influenced by microtopographic parameters in the model, varying by 35%. We found that increasing hummock height resulted in more C being stored in plant tissue and less in soil organic matter. This coincided with decreases in Sphagnum and increases in Picea and shrub net primary production. These results suggest that future studies may consider extending prognostic capabilities of carbon cycling by incorporating hummock hollow microtopography into earth system models.

58 GEOSCIENCES↗

Supersymmetry, Dark Matter and the LHC

The conceptually simplest scenario for dark matter (DM) is that it is a stable thermal relic from standard Big Bang cosmology, in many SUSY models the lightest neutralino. The relic density determination selects special regions in SUSY model parameter space with concomitant implications for collider physics, dark matter searches and low energy measurements. By studying various one-parameter extensions of the much-studied mSUGRA model (where we relax the untested universality assumptions) constructed to be in accord with the measured relic density, we show that these implications are in general model-dependent, so that LHC and DM measurements will provide clues to how sparticles acquire their masses. We point out some relatively robust implications for LHC and DM searches and conclude with an outlook for the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Lateral-Directional Parameter Estimation on the X-48B Aircraft Using an Abstracted, Multi-Objective Effector Model

The problem of parameter estimation on hybrid-wing-body aircraft is complicated by the fact that many design candidates for such aircraft involve a large number of aerodynamic control effectors that act in coplanar motion. This adds to the complexity already present in the parameter estimation problem for any aircraft with a closed-loop control system. Decorrelation of flight and simulation data must be performed in order to ascertain individual surface derivatives with any sort of mathematical confidence. Non-standard control surface configurations, such as clamshell surfaces and drag-rudder modes, further complicate the modeling task. In this paper, time-decorrelation techniques are applied to a model structure selected through stepwise regression for simulated and flight-generated lateral-directional parameter estimation data. A virtual effector model that uses mathematical abstractions to describe the multi-axis effects of clamshell surfaces is developed and applied. Comparisons are made between time history reconstructions and observed data in order to assess the accuracy of the regression model. The Cram r-Rao lower bounds of the estimated parameters are used to assess the uncertainty of the regression model relative to alternative models. Stepwise regression was found to be a useful technique for lateral-directional model design for hybrid-wing-body aircraft, as suggested by available flight data. Based on the results of this study, linear regression parameter estimation methods using abstracted effectors are expected to perform well for hybrid-wing-body aircraft properly equipped for the task.

Ratnayake, Nalin A.↗

Processing, physical metallurgy and creep of NiAl + Ta and NiAl + Nb alloys

Powder processed NiAl + Ta alloys containing 1, 2, and 4.5 at percent tantalum and NiAl + Nb alloys containing 1 and 2 at percent niobium were developed for improved creep properties. In addition, a cast alloy with 5 at percent tantalum was also studied. Hot extrusion parameters for processing alloys with 1 and 2 at percent of tantalum or niobium were designed. The NiAl + 4.5 at percent Ta alloy could be vacuum hot pressed successfully, even though it could not be extruded. All the phases in the multiphase alloys were identified and the phase transformations studied. The Ni2AlTa in NiAl + 4.5 at percent Ta alloy transforms into a liquid phase above 1700 K. Solutionizing and annealing below this temperature gives rise to a uniform distribution of fine second phase precipitates. Compressive creep properties were evaluated at 1300 K using constant load and constant velocity tests. In the higher strain rate region single phase NiAl + 1 at percent Ta and NiAl + 1 at percent Nb alloys exhibit a stress exponent of 5 characteristic of climb controlled dislocation creep. In slower strain rate regime diffusional creep becomes important. The two phase alloys containing 2 to 5 at percent Ta and 2 at percent Nb show considerable improvement over binary NiAl and single phase alloys. Loose dislocation networks and tangles stabilized by the precipitates were found in the as crept microstructure. The cast alloy which has larger grains and a distribution of fine precipitates shows the maximum improvement over binary NiAl.

Pathare, Viren M.↗

Geographic information system for fusion and analysis of high-resolution remote sensing and ground truth data

We seek to combine high-resolution remotely sensed data with models and ground truth measurements, in the context of a Geographical Information System, integrated with specialized image processing software. We will use this integrated system to analyze the data from two Case Studies, one at a bore Al forest site, the other a tropical forest site. We will assess the information content of the different components of the data, determine the optimum data combinations to study biogeophysical changes in the forest, assess the best way to visualize the results, and validate the models for the forest response to different radar wavelengths/polarizations. During the 1990's, unprecedented amounts of high-resolution images from space of the Earth's surface will become available to the applications scientist from the LANDSAT/TM series, European and Japanese ERS-1 satellites, RADARSAT and SIR-C missions. When the Earth Observation Systems (EOS) program is operational, the amount of data available for a particular site can only increase. The interdisciplinary scientist, seeking to use data from various sensors to study his site of interest, may be faced with massive difficulties in manipulating such large data sets, assessing their information content, determining the optimum combinations of data to study a particular parameter, visualizing his results and validating his model of the surface. The techniques to deal with these problems are also needed to support the analysis of data from NASA's current program of Multi-sensor Airborne Campaigns, which will also generate large volumes of data. In the Case Studies outlined in this proposal, we will have somewhat unique data sets. For the Bonanza Creek Experimental Forest (Case I) calibrated DC-8 SAR data and extensive ground truth measurement are already at our disposal. The data set shows documented evidence to temporal change. The Belize Forest Experiment (Case II) will produce calibrated DC-8 SAR and AVIRIS data, together with extensive measurements on the tropical rain forest itself. The extreme range of these sites, one an Arctic forest, the other a tropical rain forest, has been deliberately chosen to find common problems which can lead to generalized observations and unique problems with data which raise issues for the EOS System.

Freeman, Anthony↗