SEARCH · Engineering Papers

Results for “operational processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Proton Improvement Plan II Cryogenic Distribution System thermodynamic design

The Proton Improvement Plan – II (PIP-II) is a superconducting linear accelerator being built at Fermilab that will provide 800 MeV proton beams for neutrino production. The Linac requires cooling at 40 K, 5 K, and 2 K temperatures, which will be provided by cryogenic helium produced by a Helium Cryoplant and distributed by a Cryogenic Distribution System (CDS). Based primarily on the Linac heat load requirements at each temperature and the allowable pressure drop, we have made a preliminary thermodynamic design of the CDS. The design also incorporates special requirements such as controlled and/or fast cooldown of the superconducting RF cavities and their dual maximum allowable working pressures. This paper presents the overall features of the PIP-II CDS, sizing of helium process circuits, different operating modes, and calculated mass flow capacities that cater to these operating modes.

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

Dynamic Undervolting to Improve Energy Efficiency on Multicore X86 CPUs

Chip manufacturers introduce redundancy at various levels of CPU design to guarantee correct operation, even for worst-case combinations of non-idealities in process variation and system operating conditions. This redundancy is implemented partly in the form of voltage margins. However, for a wide range of real-world execution scenarios these margins are excessive and merely translate to increased power consumption, hindering the effort towards higher-energy efficiency in both HPC and general purpose computing. Our study on the x86-64 Haswell and Skylake multicore microarchitectures reveals-wide voltage margins, which vary across different microarchitectures, different chip parts of the same microarchitecture, and across different workloads. We find that it is necessary to quantify-voltage margins using multi-threaded and multi-instance workloads, as characterization with single-threaded and single-instance workloads that do not stress the CPU to its full capacity typically identifies overly optimistic margins that lead to errors when applied in realistic program execution scenarios. In addition, we introduce, deploy and evaluate a run-time governor that dynamically reduces the supply voltage of modern multicore x86-64 CPUs. Our governor employs a model that takes as input a set of performance metrics which are directly measurable via performance monitoring counters and have high predictive value for the minimum tolerable supply voltage (V min ), to predict and apply the appropriate reduction for the workload at hand. Compared with the conventional DVFS governor, our approach in this study achieves up to 42 percent energy savings for the Skylake family and 34 percent for the Haswell family for complex, real-world applications.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Surface electron modulation of metal oxide‐based electrochemical devices by surface additives—linking sensors and fuel cells

Abstract The interaction between ambient oxygen and the metal oxide surface is central to various electrochemical devices. Solid oxide fuel cell cathodes and semiconducting metal oxide gas sensors are two prominent examples. Parallels between these two systems are highlighted in this perspective. In both cases, the presence of foreign surface species has been found to significantly alter the interactions of the metal oxides’ surfaces with oxygen. On the one hand, interactions are hindered due to the presence of certain impurities, such as the degradation of fuel cell cathode by Si‐species that originate from processing or from operating environments. On the other hand, electrochemically active noble metal additives have been intentionally used to tune the sensor response of metal oxides. In the case of electrochemically active additives, the need for operando spectroscopies to elucidate the mechanism is discussed. Electronic coupling of the surface additive with the metal oxide is found to play a central role in both cases. We use these results to demonstrate that insights gained from either field can be effectively applied to the other.

Materials Science↗

DOE OSTI2022

A review on the application of machine learning for combustion in power generation applications

Abstract Although the world is shifting toward using more renewable energy resources, combustion systems will still play an important role in the immediate future of global energy. To follow a sustainable path to the future and reduce global warming impacts, it is important to improve the efficiency and performance of combustion processes and minimize their emissions. Machine learning techniques are a cost-effective solution for improving the sustainability of combustion systems through modeling, prediction, forecasting, optimization, fault detection, and control of processes. The objective of this study is to provide a review and discussion regarding the current state of research on the applications of machine learning techniques in different combustion processes related to power generation. Depending on the type of combustion process, the applications of machine learning techniques are categorized into three main groups: (1) coal and natural gas power plants, (2) biomass combustion, and (3) carbon capture systems. This study discusses the potential benefits and challenges of machine learning in the combustion area and provides some research directions for future studies. Overall, the conducted review demonstrates that machine learning techniques can play a substantial role to shift combustion systems towards lower emission processes with improved operational flexibility and reduced operating cost.

Engineering↗

DOE OSTI2020

Model Development for Multi-Component Fuel Vaporization and Flash Boiling

The objectives of this project are to improve the multi-component fuel droplet and film vaporization models used in internal combustion engine simulation, and to develop a comprehensive model to predict the characteristics of multi-component flash boiling spray. This work explores two approaches to fuel composition treatment for modeling multi-component fuel vaporization: one based on discretization and surrogates, and the other based on continuous thermodynamic distribution of fuel properties. The experimental data collected for model validation are done under three fuel form factors: droplet, spray, and thin film. The study on sprays also include experimentation under non-flash and flash boiling conditions, a phenomenon that enhances fuel vaporization. The main goals of this work are: Design and develop a multi-component fuel droplet and wall film vaporization model using both discrete and continuous thermodynamics methods. Design and develop an analytical model for multi-component flash boiling. Integrate the multi-component droplet and film model into multi-dimensional engine calculations to predict the fuel vaporization process under engine operation condition. Conduct multi-component droplet and fuel film vaporization experiments in a non-combusting chamber to verify the proposed vaporization models. Characterize flash boiling phenomena of multi-component fuel sprays by optical and laser diagnostic techniques. This report will detail the experimental setup and the numerical basis for developing a model to achieve the main goals listed above. Key features of observed multi-component fuel vaporization will be summarized at the end of each experimental sections, and corresponding model performance evaluation will be presented at the end of each model development section.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

Demonstration of Defense Waste Processing Facility (DWPF) Higher Fissile Content Glass

The Accelerated Basin De-inventory (ABD) Program has been proposed as an alternative for future spent nuclear fuel (SNF) and nuclear material processing at the Savannah River Site (SRS). This approach would change the baseline H-Canyon (HCAN), Concentrate, Storage, and Transfer Facility (CSTF), and Defense Waste Processing Facility (DWPF) operations. The ABD Program would require that all domestic and foreign research reactor SNF currently at SRS be dissolved, stored, and then transferred to CSTF without the recovery of uranium. Preliminary assessments in the ABD Program plan have shown that ~5000 extra SRS high-level waste (HLW) canisters would be produced if the fissile mass loading remains at the current 897 g/m 3 limit; however, increasing the limit to 2500 g/m 3 would result in ~520 extra canisters. Thus, the ABD Program plan requires an increase of the DWPF fissile mass loading limit to 2500 g/m 3 to minimize canister production. DWPF considers the following isotopes in the calculation of fissile mass loading: U-233, U-235, Pu-239 and Pu-241.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Staged OMB for Modular Gasifier/Burner

The goal of this final project report is to comprehensively summarize the work conducted on project DE-FE0031506. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UK CAER) (Recipient) has developed a staged opposed multi-burner (OMB) gasifier, scaled down from a commercial gasification technology to utilize coal slurry as feed for the high-temperature gasification. The project involved the design, fabrication, commissioning, parametric testing, and performance validation of the entrained gasifier with multiple burners to narrow the major near-term technical gaps that impede the application of small-size gasification by modularizing the system. Project results verified the UK CAER approach to address the major technical challenges on the gasification modularization for a distributed application at a small scale of 1-5 MWe, while maintaining advantages in cost and flexibility, which include: 1) a cost-effective burner configuration to provide high flexibility in both load and fuel feed; 2) the modularized staged-OMB to provide better gasification performance such as a desired temperature profile, better fuel conversion, better gasification efficiency, and long lifetimes of the refractory wall and burners; and 3) load control simply through changing the number of burners firing. UK CAER’s staged gasifier configuration, fuel blend performance, and economic evaluation shows promise, as summarized in this report, as an effective means for improved gasification efficiency with reduced operation cost and process complexity.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2021

Modeling and Measuring the Stress Distribution in Soft Magnetic Cores due to Epoxy Impregnation and Curing

Understanding the effects of viscoelastic relaxation of stresses is critical in electric motor and inductor applications, where the magnetic material is fully or partially comprised of an amorphous phase and impregnated in an epoxy. Magnetic Amorphous Nanocomposites (MANCs) are a class of recently developed high-frequency magnetic materials that exhibit low magnetic hysteresis, high saturation flux density and very low AC magnetic losses. MANCs are formed as long, thin ribbons, a shape factor that minimizes eddy current-induced self-heating. This feature, in addition to their 1 GPa strength, and makes them attractive candidates for high-speed, high-power density, electric motors. MANCs are used in the form of tape-wound cores (TWCs). During the manufacturing process, the cores are impregnated with liquid epoxy between each layer of ribbon. Validated knowledge of the stresses imposed by the manufacturing process and during operation is necessary to understand motor performance limitations with respect to strength. Magnetostriction, the strain imposed by reversal of the magnetic field, also affects performance. When the epoxy cures, it contracts volumetrically by 8%, imposing radial and circumferential stresses that vary along the radial direction. To date, these stresses have received little attention in the literature. Here, we model the stress distribution throughout a TWC due to epoxy curing. Strain gauge measurements reported here indicate substantially lower tangential strain than model values, which is beneficial and which we attribute to viscoelastic relaxation of the epoxy layers. We will incorporate a constitutive model of this viscoelastic relaxation, and conduct more detailed strain measurements to understand how this takes

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2022

Modeling Analog Tile-Based Accelerators Using SST

Analog computing has been widely proposed to improve the energy efficiency of multiple important workloads including neural network operations, and other linear algebra kernels. To properly evaluate analog computing and explore more complex workloads such as systems consisting of multiple analog data paths, system level simulations are required. Moreover, prior work on system architectures for analog computing often rely on custom simulators creating signficant additional design effort and complicating comparisons between different systems. To remedy these issues, this report describes the design and implementation of a flexible tile-based analog accelerator element for the Structural Simulation Toolkit (SST). The element focuses on heavily on the tile controller—an often neglected aspect of prior work—that is sufficiently versatile to simulate a wide range of different tile operations including neural network layers, signal processing kernels, and generic linear algebra operations without major constraints. The tile model also interoperates with existing SST memory and network models to reduce the overall development load and enable future simulation of heterogeneous systems with both conventional digital logic and analog compute tiles. Finally, both the tile and array models are designed to easily support future extensions as new analog operations and applications that can benefit from analog computing are developed.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Development of Automated Material Handling System with Alternate Gripper Designs for the Purpose of Increased Performance & Worker Safety

Savannah River National Laboratory’s (SRNL) Surplus Plutonium Disposition (SPD) Program leads the development and transition of automated unit operations for the processing of Plutonium oxide. A mixing can is opened, filled with material, mixed, set inside of a die can, and finally punched into compressed material. Replication of the process is constructed in A-area, where the mixing can weighs 1.6 kg (3.5 lbs.) and the compressed material weighs 4 kg (8.8 lbs.). Due to the constant process of Plutonium disposition, the fatigue on workers and worker dose accumulates quickly over time. SPD aims to automate this process by using a robotic arm to replace the hands-on worker. Automation will: Reduce worker radiation dose; Increase process throughout; Reduce costs for the disposition of Plutonium oxide.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Increased Interpretability for Model-Driven Deception: MARS LDRD Project

Machine learning has been proposed as a solution to several cybersecurity solutions and one of the most promising applications is for digital twins for intrusion detection and driving deceptive defense. However, machine learning techniques often result in a black-box function that is difficult for end users to interpret which for deception limits their ability to effectively define decoys. In this report, an approach to validate the equations learned are accurate is provided and demonstrated. Following, begins the process of addressing this issue for a model-driven deception technology that produces equations representing the physical process controlled by operation technology devices. This research was performed by applying subject matter expert context to machine learned models.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Production Facility Simulations for Annular LEU Targets

Eden Radioisotopes, LLC is designing a new molybdenum-99 (Mo-99) production facility based on a TRIGA-sized reactor with a core composed of low enriched uranium (LEU) targets. Reactor production is designed to exceed U.S. demand for Mo-99 using the fission processes. The nominal operational power is 1.8MW (less than 2.0MW, to satisfy the “non-power” reactor requirement) and desired irradiation scenarios include 7, 14, or 21 days of the irradiation for each target element. Safety limits for reactor operating margins are associated with such physical phenomena as fission gas release, fuel swelling, and stress cracking. As shown in the literature, one of the critical parameters defining safety margins for metallic uranium fuel is swelling. In its turn the fuel operational temperature is the main parameter impacting the swelling rate. This report documents the results of consecutive studies of reactor criticality, fission energy depositions, and cooling conditions for the target. The maximum temperature calculated for the LEU targets allows us to choose appropriate modeling approximation of the swelling. All obtained results refer to the preliminary targets and core designs provided by Eden. A criticality analysis was performed, and the results are listed mainly to cross-check Eden’s safety report and assume maximal neutron field disturbance for maximal reactivity. A brief description of the metallic uranium swelling model is provided in the Appendix.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2025

Efficient, reliable and cost-effective reversible solid oxide cell technology for hydrogen and electricity production

This report summarizes the work performed by University of California San Diego (UCSD) – OxEon Energy LLC (OxEon) for the U. S. Department of Energy/National Energy Technology Laboratory (DOE/NETL) under Cooperative Agreement DE-FE0031940 entitled “Efficient, Reliable and Cost Effective Reversible Solid Oxide Cell Technology for Hydrogen and Electricity Production”. This reversible solid oxide cell (RSOC) technology has two main novel elements: (i) a compact and low-cost stack architecture that consists of multi-cell cell modules in electrical parallel and series connections and (ii) high performance and fuel-flexible reversible cells with electrodes or all components made by sputtering deposition process for efficient operation in both fuel cell (power generation) and electrolysis (hydrogen production) modes.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2025

Conformal Hierarchical Simulation-Based Inference with Local Validity

Trustworthy and interpretable uncertainty quantification is a long-standing challenge in artificial intelligence. Simulation-based inference (SBI) comprises a broad swath of approaches for estimating latent parameters with uncertainties. Although flexible neural density estimators in SBI can be remark- ably expressive capturing highly structured, high-dimensional posteriors their credible regions can be badly mis-calibrated and are often only accompanied by heuristic coverage checks. We present the first SBI framework that delivers finite-sample local valid coverage guarantees that hold in the neighborhood of each observation. Our framework can couple any off-the-shelf hierarchical SBI engine with a confor- mal Bayesian post-processing step that operates on the posterior predictive density. A kernel-weighted conformity score adapts the conformal quantile to the local geometry of the data, yielding prediction sets that are simultaneously (i) marginally calibrated, (ii) locally valid, and (iii) hierarchical, handling global and observation-specific parameters in a single pass. Through experiments on synthetic data and benchmarks from neuroscience and physics, we show that our approach attains 1 − α coverage, where prior SBI methods under- or over-cover. Our approach also maintains a competitive, credible set size with minimal computational overhead. Finally, our approach can be used to make predictions on real data and give valid credible regions modulo weight-initialization-based model mis-specification.

Trivedi, Shubhendu [Fermilab]↗

DOE OSTI2026

Advancing In-Situ Plasma Processing for SRF Cavities at Fermilab

This talk presents Fermilab’s experience with plasma processing applied to both elliptical and low-beta superconducting RF cavities. The development and implementation of the technique are compared across different geometries, with particular emphasis on constraints imposed by cryomodule assembly configurations. The talk also reports on systematic studies aimed at optimizing the processing recipe, including the exploration of various inert gas mixtures and oxygen concentrations. These results aim at providing guidance for tailoring plasma processing conditions to different cavity types and advancing plasma processing applicability in operational cryomodules.

Giaccone, Bianca [Fermilab] (ORCID:000000027275846↗

DOE OSTI2026

Advancing In-Situ Plasma Processing for SRF Cavities at Fermilab

Giaccone, Bianca [Fermilab] (ORCID:000000027275846↗

DOE OSTI2026

r -process Nucleosynthesis from Hyperaccreting Neutron Stars in Common Envelopes

We investigate nuclear reactions and feedback in hyperaccreting neutron star environments, considering accretion rates in the range 0.3–3 × 10 4 M ⊙ yr −1 , typical of short-period compact-object binaries in common envelopes. Our models account for weak reactions, neutrino energy loss, nuclear energy release, pair production, degenerate equations of state, and general relativistic hydrodynamics. Depending on the accretion rates, these systems can develop both proton- and neutron-rich atmospheres with strong convective instabilities linking the neutrino sphere to the outgoing accretion shock inside the radiation trapping zone. Convection drives nucleons through multiple heating and cooling cycles, with photodisintegration dominating during the heating phase and heavy element synthesis during the cooling phase, ejecting material with abundances that depend on the accretion rate and depth of the final decompression trajectory. The turbulent nature of convective currents is conducive to creating a wide range of nuclear products through a variety of effects, including nuclear statistical equilibrium freeze-out and the r-, p-, and γ-processes. We also observe a novel multistep process in reheated trajectories, consisting of proton-capture and photodissociation reactions operating on r-process seeds, producing overall neutron-deficient isotopes. A significant amount of infalling gas experiences high entropy and short (millisecond) freeze-out timescales capable of making r-process elements with high overabundances through a disequilibrium effect between neutrons and α-particles that does not require an excess of neutrons.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Investigating the Effects of Bars on Star Formation and Nuclear Activity of Galaxies Using DESI Survey Data

We present a statistical analysis of the connections between galactic bars, star formation, and active galactic nucleus (AGN) activity using 33,201 disk galaxies (0.01 < z < 0.05) from Dark Energy Spectroscopic Instrument Data Release 1 (DESI DR1) cross-matched with Galaxy Zoo DESI. Based on morphological classifications, we identify 3508 strongly barred and 8335 weakly barred systems. We find that barred galaxies exhibit a clear bimodal distribution in color–mass space: weak bars are preferentially found in bluer, lower-mass disks, whereas strong bars are more common in massive, redder systems. Strongly barred galaxies are on average more massive and metal rich than unbarred systems. In addition, strong bars enhance central star formation rates (SFRs) in low-mass galaxies but reduce specific SFRs in massive systems, reflecting a dual role where bars initially trigger central star formation but eventually promote quenching by accelerating gas consumption. In terms of nuclear activity, barred galaxies display a higher incidence of AGN activity. The presence of a bar is also associated with an increased fraction of powerful AGN, with the highest proportions found in strongly barred systems. However, the correlations between AGN activity and detailed bar structural parameters are weak, suggesting that the link between bars and nuclear activity is indirect and regulated by multiple factors. Overall, our results support a scenario in which bars facilitate angular momentum transport and gas inflow, thereby driving central star formation and fueling supermassive black hole accretion while operating alongside other processes that shape galaxy evolution.

Liu, Jianfei [Chinese Academy of Sciences (CAS), B↗