Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

RCRA Part A and Part B Permit Application for Waste Management Activities at the Nevada Test Site: Proposed Mixed Waste Disposal Unit (MWSU)

The proposed Mixed Waste Storage Unit (MWSU) will be located within the Area 5 Radioactive Waste Management Complex (RWMC). Existing facilities at the RWMC will be used to store low-level mixed waste (LLMW). Storage is required to accommodate offsite-generated LLMW shipped to the Nevada Test Site (NTS) for disposal in the new Mixed Waste Disposal Unit (MWDU) currently in the design/build stage. LLMW generated at the NTS (onsite) is currently stored on the Transuranic (TRU) Pad (TP) in Area 5 under a Mutual Consent Agreement (MCA) with the Nevada Division of Environmental Protection, Bureau of Federal Facilities (NDEP/BFF). When the proposed MWSU is permitted, the U.S. Department of Energy (DOE) will ask that NDEP revoke the MCA and onsite-generated LLMW will fall under the MWSU permit terms and conditions. The unit will also store polychlorinated biphenyl (PCB) waste and friable and non-friable asbestos waste that meets the acceptance criteria in the Waste Analysis Plan (Exhibit 2) for disposal in the MWDU. In addition to Resource Conservation and Recovery Act (RCRA) requirements, the proposed MWSU will also be subject to Department of Energy (DOE) orders and other applicable state and federal regulations. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational RCRA units at the NTS and their respective regulatory status.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conceptual Evaluation for the Installation of Treatment Capability for Mixed Low Level Waste at the Nevada National Security Site

National Security Technologies, LLC, initiated an evaluation of treatment technologies that they would manage and operate as part of the mixed low-level waste (MLLW) disposal facilities at the Nevada National Security Site (NNSS). The NNSS Disposal Facility has been receiving radioactive waste from the U.S. Department of Energy (DOE) complex since the 1960s, and since 2005 the NNSS Disposal Facility has been receiving radioactive and MLLW for disposal only. In accordance with the Resource Conservation and Recovery Act (RCRA), all mixed waste must meet land disposal restrictions (LDRs) prior to disposal. Compliance with LDRs is attained through treatment of the waste to mitigate the characteristics of the listed waste hazard. Presently, most generators utilize commercial capacity for waste treatment prior to shipment to the NNSS Disposal Facility. The objectives of this evaluation are to provide a conceptual study of waste treatment needs (i.e., demand), identify potential waste treatment technologies to meet demand, and analyze implementation considerations for initiating MLLW treatment capacity at the NNSS Disposal Facility. A review of DOE complex waste generation forecast data indicates that current and future Departmental demand for mixed waste treatment capacity will remain steady and strong. Analysis and screening of over 30 treatment technologies narrowed the field of treatment technologies to four: • Macroencapsulation • Stabilization/microencapsulation • Sort and segregation • Bench-scale mercury amalgamation The analysis of treatment technologies also considered existing permits, current the NNSS Disposal Facility infrastructure such as utilities and procedures, and past experiences such as green-light and red-light lessons learned. A schedule duration estimate has been developed for permitting, design, and construction of onsite treatment capability at the NNSS Disposal Facility. Treatment capability can be ready in 20 months.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Turbulent Mixing Simulation via a Quantum Algorithm

Probability density function (PDF) methods have been very useful in describing many physical aspects of turbulent mixing. In applications of these methods, modeled PDF transport equations are commonly simulated via classical Monte Carlo techniques, which provide estimates of moments of the PDF at arbitrary accuracy. In this paper, recently developed techniques in quantum computing and quantum enhanced measurements (quantum metrology) are used to construct a quantum algorithm that accelerates the computation of such estimates. This quantum algorithm provides a quadratic speedup over classical Monte Carlo methods in terms of the number of repetitions needed to achieve the desired precision. This paper illustrates the power of this algorithm by considering a binary scalar mixing process modeled by means of the coalescence/dispersion (C/D) closure. The equation is first simulated using classical Monte Carlo methods, where error estimates for the computation of central moments are provided. Then the quantum algorithm for this problem is simulated by sampling from the same probability distribution as that of the output of a quantum computer, and it is shown that significantly fewer resources are required to achieve the same precision. Finally, the results demonstrate potential applications of future quantum computers for simulation of turbulent mixing, and large classes of related problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CARBON BED MERCURY EMISSIONS CONTROL FOR MIXED WASTE TREATMENT

Mercury has had various uses in nuclear fuel reprocessing and other nuclear processes, and so is often present in radioactive and mixed (both radioactive and hazardous according tohe Resource Conservation and Recovery Act) wastes. Depending on regulatory requirements, the mercury in the off-gas must be controlled with sometimes very high efficiencies. Compliance to the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards can require off-gas mercury removal efficiencies up to 99.999% for thermally treating some mixed waste streams. Several test programs have demonstrated this level of off-gas mercury control using fixed beds of granular sulfur-impregnated activated carbon. Other results of these tests include: (a) The depth of the mercury control mass transfer zone was less than 15-30 cm for the operating conditions of these tests, (b) MERSORB® carbon can sorb Hg up to 19 wt% of the carbon mass, and (c) the spent carbon retained almost all (98 – 99.99%) of the Hg; but when even a small fraction of the total Hg dissolves, the spent carbon can fail the TCLP test when the spent carbon contains high Hg concentrations. Localized areas in a carbon bed that become heated through heat of adsorption, to temperatures where oxidation occurs, are referred to as “bed hot spots.” Carbon bed hot spots must be avoided in processes that treat radioactive and mixed waste. Key to carbon bed hot spot mitigation are (a) designing for sufficient gas velocity, for avoiding gas flow maldistribution, and for sufficient but not excessive bed depth, (b) monitoring and control of inlet gas flowrate, temperature, and composition, (c) monitoring and control of in-bed and bed outlet gas temperatures, and (d) most important, monitoring of bed outlet CO concentrations. An increase of CO levels in the off-gas downstream of the carbon bed to levels about 50-100 ppm higher than the inlet CO concentration indicate CO formation in the bed, caused by carbon bed hot spots. Corrective actions must be implemented quickly if bed hot spots are detected, using a graded approach and sequence starting with corrective actions that are simple, quick, cause the least impact to the process, and are easiest to recover from. Multiple high and high-high alarm levels should be used, with appropriate corrective actions for each level.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Seasonal and Interspecific Variation in Frugivory by a Mixed Resident-Migrant Overwintering Songbird Community

Many temperate passerine bird species switch from diets of mostly invertebrates in the spring and summer to diets that include fruit and seeds in the fall and winter. However, relatively few studies have quantified diet composition or the extent of seasonal shifts during the non-breeding period, particularly among species and across communities with both residents and migrants. We measured carbon and nitrogen stable isotope values in food items (fruits, C3 and C4 seeds, and insects from various trophic levels and plant communities) and in multiple tissues (feathers and plasma/whole blood) from 11 species of songbirds wintering in the southeastern U.S. We combined these diet and tissue values with empirically derived discrimination factors and used concentration-dependent mixing models to quantify seasonal diet shifts. We also validated mixing model results with data from fecal samples. Diets in this bird community, as delineated N and C isotopic space, diverged in the fall and winter relative to the summer as consumption of fruits and seeds increased. Across this songbird community, estimated contributions of fruit to plasma/whole blood increased from 16.2 ± 7.5% in the fall (mean ± SD; range: 4–26%) to 21.7 ± 10.3% (range: 9–37%) in the winter, while contributions of seeds increased from 29.4 ± 2.6% (range: 28–32%) in the fall to 36.6 ± 4.8% (range: 32–42%) in the winter. Fecal data showed qualitatively similar trends to mixing models, but consistently estimated higher contributions of fruit. Our work indicates that fruits and seeds constitute substantial sources of sustenance for non-breeding songbirds, there is considerable separation of resource use among species in the fall and winter, and fecal estimates of contributions to songbird tissues should be interpreted cautiously.

54 ENVIRONMENTAL SCIENCES↗

Enthalpy of Mixing in Al–Tb Liquid

The liquid-phase enthalpy of mixing for Al$-$Tb alloys is measured for 3, 5, 8, 10, and 20 at% Tb at selected temperatures in the range from 1364 to 1439 K. Methods include isothermal solution calorimetry and isoperibolic electromagnetic levitation drop calorimetry. Mixing enthalpy is determined relative to the unmixed pure (Al and Tb) components. The required formation enthalpy for the Al3Tb phase is computed from first-principles calculations. Finally, based on our measurements, three different semi-empirical solution models are offered for the excess free energy of the liquid, including regular, subregular, and associate model formulations. These models are also compared with the Miedema model prediction of mixing enthalpy.

36 MATERIALS SCIENCE↗

V&V for turbulent mixing in the intermediate asymptotic regime

Turbulent fluid flow interacts nonlinearly with a number of processes, including reactive flow (chemistry), radiation, and the transport of particles embedded in the flow. Subgrid scale modeling of these nonlinear processes is a major challenge to computational science. To this end, turbulent mixing of dissimilar fluids is a driver. Here we study validation issues for a class of turbulent mixing simulations. In previous work, we have obtained agreement between simulation and experiment. The present paper addresses a remaining issue, the role of meniscus related boundary effects for immiscible fluids in the validation process. Validation and even verification has been controversial for turbulent mixing flows, as commonly used numerical models are diffusive and the resulting numerical diffusion modifies the parameters of the problem and its solution. Additionally, numerical diffusion of concentration and temperature is well documented in the scientific literature for Eulerian simulations. Lagrangian simulations, which might appear to avoid this problem, are subject to mesh tangling, ensuing regridding and use of Arbitrary Lagrangian Eulerian codes to substitute for a pure Lagrangian algorithm. In practice, Lagrangian methods are potentially subject to the same numerical diffusion issues when used to study complex interface instabilities.

97 MATHEMATICS AND COMPUTING↗

Impact of dry intrusion events on the composition and mixing state of particles during the winter Aerosol and Cloud Experiment in the Eastern North Atlantic (ACE-ENA)

Abstract. Long-range transport of continental emissions has a far-reaching influence over remote regions, resulting in substantial change in the size, morphology, and composition of the local aerosol population and cloud condensation nuclei (CCN) budget. Here, we investigate the physicochemical properties of atmospheric particles collected on board a research aircraft flown over the Azores during the winter 2018 Aerosol and Cloud Experiment in the Eastern North Atlantic (ACE-ENA) campaign. Particles were collected within the marine boundary layer (MBL) and free troposphere (FT) after long-range atmospheric transport episodes facilitated by dry intrusion (DI) events. Chemical and physical properties of individual particles were investigated using complementary capabilities of computer-controlled scanning electron microscopy and X-ray spectromicroscopy to probe particle external and internal mixing state characteristics. Furthermore, real-time measurements of aerosol size distribution, cloud condensation nuclei (CCN) concentration, and back-trajectory calculations were utilized to help bring into context the findings from offline spectromicroscopy analysis. While carbonaceous particles were found to be the dominant particle type in the region, changes in the percent contribution of organics across the particle population (i.e., external mixing) shifted from 68 % to 43 % in the MBL and from 92 % to 46 % in FT samples during DI events. This change in carbonaceous contribution is counterbalanced by the increase in inorganics from 32 % to 57 % in the MBL and 8 % to 55 % in FT. The quantification of the organic volume fraction (OVF) of individual particles derived from X-ray spectromicroscopy, which relates to the multi-component internal composition of individual particles, showed a factor of 2.06 ± 0.16 and 1.11 ± 0.04 increase in the MBL and FT, respectively, among DI samples. We show that supplying particle OVF into the κ-Köhler equation can be used as a good approximation of field-measured in situ CCN concentrations. We also report changes in the κ values in the MBL from κMBL, non-DI=0.48 to κMBL, DI=0.41, while changes in the FT result in κFT, non-DI=0.36 to κFT, DI=0.33, which is consistent with enhancements in OVF followed by the DI episodes. Our observations suggest that entrainment of particles from long-range continental sources alters the mixing state population and CCN properties of aerosol in the region. The work presented here provides field observation data that can inform atmospheric models that simulate sources and particle composition in the eastern North Atlantic.

54 ENVIRONMENTAL SCIENCES↗

Effects of High-frequency Wind Sampling on Simulated Mixed Layer Depth and Upper Ocean Temperature

Effects of high-frequency wind sampling on a near-global ocean model are studied by forcing the model with a 12 hourly averaged wind product and its 24 hourly subsamples in separate experiments. The differences in mixed layer depth and sea surface temperature resulting from these experiments are examined, and the underlying physical processes are investigated. The 24 hourly subsampling not only reduces the high-frequency variability of the wind but also affects the annual mean wind because of aliasing. While the former effect largely impacts mid- to high-latitude oceans, the latter primarily affects tropical and coastal oceans. At mid- to high-latitude regions the subsampled wind results in a shallower mixed layer and higher sea surface temperature because of reduced vertical mixing associated with weaker high-frequency wind. In tropical and coastal regions, however, the change in upper ocean structure due to the wind subsampling is primarily caused by the difference in advection resulting from aliased annual mean wind, which varies with the subsampling time. The results of the study indicate a need for more frequent sampling of satellite wind measurement and have implications for data assimilation in terms of identifying the nature of model errors.

mixed layered depth↗

Probabilistic Machine Learning Estimation of Ocean Mixed Layer Depth from Dense Satellite and Sparse In-Situ Observations

The ocean mixed layer plays an important role in the coupling between the upper ocean and atmosphere across a wide range of time scales. Estimation of the variability of the ocean mixed layer is therefore important for atmosphere-ocean prediction and analysis. The increasing coverage of in situ Argo profile data allows for an increasingly accurate analysis of the mixed layer depth (MLD) variability associated with deviations from the seasonal climatology. However, sampling rates are not sufficient to fully resolve subseasonal (<90 day) MLD variability. Yet, many multivariate observations-based analyses include implicit modeled subseasonal MLD variability. One analysis method is optimal interpolation of in situ data, but the interior analysis can be improved by leveraging surface data with regression or variational approaches. Here, we demonstrate how machine learning methods and satellite sea surface temperature, salinity, and height facilitate MLD estimation in a pilot study of two regions: the mid-latitude southern Indian and the eastern equatorial Pacific Oceans. We construct multiple machine learning architectures to produce weekly 1/2° gridded MLD anomaly fields (relative to a monthly climatology) with uncertainty estimates. We test multiple traditional and probabilistic machine learning techniques to compare both accuracy and probabilistic calibration. We validate our methodology by applying it to ocean model simulations. We find that incorporating sea surface data through a machine learning model improves the performance of spatiotemporal MLD variability estimation compared to optimal interpolation of Argo observations alone. These preliminary results are a promising first step for the application of machine learning to MLD prediction.

Machine Learning↗

Theoretical Study of CH3Cl-N2 Line Shapes in the ν1 Band. Line Mixing Effects in QR Doublets and QQk Sub-Branches

Line coupling and line mixing effects of CH3Cl lines in the ν1 band perturbed by N2 have been investigated. We have taken into account the non-diagonality of the exp(−S2) operator within specified line spaces as well as the k-degeneracy of the transitions (due to the double degeneracy of the j,k levels with k ≠ 0). These transitions should be considered as doublets coupled by the line mixing process. A new problem appears in the calculation when the atom-atom potential model is introduced. In order to overcome this difficulty, a pragmatic approach is proposed. Comparisons of theoretically calculated matrix elements of W with measurements of QR(j,k) doublets as well as some QQk sub-branches, which are strongly affected by line mixing, have been made. The results show that the formalism improved in this way leads to rather accurate predictions.

Methyl chloride↗

Implicit Large-Eddy Simulations of Compressible Mixing Layers

Implicit large-eddy simulations of the self-similar regions of two compressible mixing layers at high Reynolds number and convective Mach numbers of 0.381 and 0.690 were carried out. Experimental data was used as the input into a synthetic eddy method turbulent inflow boundary condition to initiate simulations. Computational grids with nearly isotropic cells were used and the grid counts ranged from 24 to 270 million points. Agreement with experimental velocity and Reynolds stress data was good given the simplifications of the simulation. The decrease in mixing layer growth rate with increasing compressibility compares well with the literature. Budgets for the Reynolds stress transport equation were extracted from the simulations. It was demonstrated that the grids used did not resolve the dissipation term at the experimental Reynolds number. However, low Reynolds number simulations indicate that the numerical dissipation replaces the physical dissipation and the dissipation term in the transport equation can be represented by the summation term that quantifies the imbalance in the budget. The budgets for the high Reynolds number mixing layers agree well with previous low Reynolds number studies; indicating that the primary mechanism for the reduced growth rate and increased anistropy of the Reynolds stress tensor due to compressibility is a reduction in the pressure-strain and production terms. A new scaling based on the magnitude of the Reynolds stress tensor is proposed. This scaling provides better relative comparisons between the data and shows that the decrease in pressure-strain in the shear component is the primary driver in reducing the transverse normal stress.

turbulence↗

Impact of Mixed Feedstocks and Feedstock Densification on Ionic Liquid Pretreatment Efficiency

Background: Lignocellulosic biorefineries must be able to efficiently process the regional feedstocks that are available at cost-competitive prices year round. These feedstocks typically have low energy densities and vary significantly in composition. One potential solution to these issues is blending and/or densifying the feedstocks in order to create a uniform feedstock. Results/discussion: We have mixed four feedstocks - switchgrass, lodgepole pine, corn stover, and eucalyptus - in flour and pellet form and processed them using the ionic liquid 1-ethyl-3-methylimidazolium acetate. Sugar yields from both the mixed flour and pelletized feedstocks reach 90% within 24 hours of saccharification. Conclusions: Mixed feedstocks, in either flour or pellet form, are efficiently processed using this pretreatment process, and demonstrate that this approach has significant potential.

09 BIOMASS FUELS↗

Development of a nuclear mixing process for high performance cementation - 15064

In the CEA Project 'Cementation of LLW/ILW Slurry' EIRICH and CEA developed together a high performance mixing process matching the French security regulations for nuclear facilities. Since 2010 mixing tests had been carried out by CEA to develop and verify a new cementation process. In 2012 EIRICH started the development of the mixing equipment for the cementation plant together with CEA. This new cementation plant will be put into operation in 2016 at the CEA site in Marcoule. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mixed Reality Training and Workspace Integration

Mixed reality technology is being used across Idaho National Laboratory (INL) to enhance training and workforce development. Projects involving mixed reality such as lockout/tagout , the Industrial Control System Laboratory , and a Department of Defense microreactor demonstration have benefited from these innovative approaches. Several key concerns exist with integrating this new technology, including ease of use, ease of setup, and maintenance through the lifecycle. These aspects need to be properly addressed to ensure that this technology remains attractive and useful to operations teams as well as engineers and researchers at INL. Primarily, this requires buy-in from information technology management, designing software/hardware-agnostic tools, and reducing friction with technology integration. To be successful, regular operational use of this new and unfamiliar technology will require straightforward user interfaces, simple setup processes, and feature-rich experiences that reduce the time needed to benefit from the technology. INL is improving its toolset to allow for a streamlined deployment and use of mixed reality technologies that are directly available to researchers and engineers.

99 GENERAL AND MISCELLANEOUS↗

Communication: State mixing by spin-orbit coupling in the anionic chloroiodine dissociations

Three spin-orbit states, 1{sup 2}Π{sub 1/2}, 2{sup 2}Π{sub 3/2}, and 2{sup 2}Π{sub 1/2}, of chloroiodine anion (ICl{sup −}) formed by low-energy electron attachment in the Franck-Condon region are associated with the dissociative limits of I{sup −} ({sup 1}S{sub 0}) and Cl ({sup 2}P{sub 3/2}) or Cl{sup *} ({sup 2}P{sub 1/2}) fragments. Within the adiabatic scheme, the presumptive Π-symmetry of the fragment angular distributions is dramatically changed to be the Π-Σ mixing symmetry, due to the significant spin-orbit interaction effect on the electronic state couplings of ICl{sup −}. The present experimental approach also enables us to separate the contributions of different electronic states from the mixed states, providing a crucial method for quantitatively evaluating the configuration-interaction wavefunctions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigating Using Oscillating Jets for Fluid Mixing

Scaled mixing experiments were conducted to evaluate maintaining mobilized particles in a uniform suspension (the condition of concentration uniformity) using jet pumps to mix the suspension. The study experimentally evaluated uniformity in a 1/12-scale experiment varying the Reynolds number, Froude number, and gravitational settling parameter space. The initial matrix specified only tests at 100% U0D0 and 25% U0D0. After initial tests were conducted with small diameter, low viscosity simulant this matrix was revised to allow evaluation of a broader range of U0D0. The revised matrix included a full factorial test between 100% and 50% U0D0 and two half-factorial tests at 75% and 25% U0D0. Adding points at 75% U0D0 and 50% U0D0 allowed evaluation of curvature. Eliminating points at 25% U0D0 decreased the testing time by several weeks. Test conditions were achieved by varying the simulant viscosity, the mean particle size (dp), and the jet nozzle exit velocity (U0). Concentration measurements at sampling locations throughout the tank were used to assess the degree of uniformity achieved during each test. Concentration data was obtained using a real time ultrasonic attenuation probe and discrete batch samples. The undissolved solids concentration at these locations was analyzed to determine whether the tank contents were uniform (< ±10% variation about mean) or nonuniform (> ±10% variation about mean) in concentration. Concentration inhomogeneity was modeled as a function of dimensionless groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water Vapor Turbulence Profiles in Stationary Continental Convective Mixed Layers

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) program’s Raman lidar at the ARM Southern Great Plains (SGP) site in north-central Oklahoma has collected water vapor mixing ratio (q) profile data more than 90% of the time since October 2004. Three hundred (300) cases were identified where the convective boundary layer was quasi-stationary and well-mixed for a 2-hour period, and q mean, variance, third order moment, and skewness profiles were derived from the 10-s, 75-m resolution data. These cases span the entire calendar year, and demonstrate that the q variance profiles at the mixed layer (ML) top changes seasonally, but is more related to the gradient of q across the interfacial layer. The q variance at the top of the ML shows only weak correlations (r < 0.3) with sensible heat flux, Deardorff convective velocity scale, and turbulence kinetic energy measured at the surface. The median q skewness profile is most negative at 0.85 zi, zero at approximately zi, and positive above zi, where zi is the depth of the convective ML. The spread in the q skewness profiles is smallest between 0.95 zi and zi. The q skewness at altitudes between 0.6 zi and 1.2 zi is correlated with the magnitude of the q variance at zi, with increasingly negative values of skewness observed lower down in the ML as the variance at zi increases, suggesting that in cases with larger variance at zi there is deeper penetration of the warm, dry free tropospheric air into the ML.

Turner, D. D.↗