Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Controllable strain-driven topological phase transition and dominant surface-state transport in HfTe5

Abstract The fine-tuning of topologically protected states in quantum materials holds great promise for novel electronic devices. However, there are limited methods that allow for the controlled and efficient modulation of the crystal lattice while simultaneously monitoring the changes in the electronic structure within a single sample. Here, we apply significant and controllable strain to high-quality HfTe 5 samples and perform electrical transport measurements to reveal the topological phase transition from a weak topological insulator phase to a strong topological insulator phase. After applying high strain to HfTe 5 and converting it into a strong topological insulator, we found that the resistivity of the sample increased by 190,500% and that the electronic transport was dominated by the topological surface states at cryogenic temperatures. Our results demonstrate the suitability of HfTe 5 as a material for engineering topological properties, with the potential to generalize this approach to study topological phase transitions in van der Waals materials and heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High pressure suppression of plasticity due to an overabundance of shear embryo formation

Abstract High pressure shear band formation is a critical phenomenon in energetic materials due to its influence on both mechanical strength and mechanochemical activation. While shear banding is known to occur in a variety of these materials, the governing dynamics of the mechanisms are not well defined for molecular crystals. We conduct molecular dynamics simulations of shock wave induced shear band formation in the energetic material 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) to assess shear band nucleation processes. We find, that at high pressures, the initial formation sites for shear bands, “embryos”, form in excess and rapidly lower deviatoric stresses prior to shear band formation and growth. This results in the suppression of plastic deformation. A local cluster analysis is used to quantify and contrast this mechanism with a more typical shear banding seen at lower pressures. These results demonstrate a mechanism that is reversible in nature and that supersedes shear band formation at increased pressures. We anticipate that these results will have a broad impact on the modeling and development of high-strain rate application materials such as those for high explosives and hypersonic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Data-driven modeling of dislocation mobility from atomistics using physics-informed machine learning

Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulations under varying conditions of temperature and stress. This tedious and time-consuming approach becomes particularly cumbersome for materials with complex dependencies on stress, temperature, and local environment, such as body-centered cubic crystals (BCC) metals and alloys. In this paper, we present a novel, uncertainty quantification-driven active learning paradigm for learning dislocation mobility laws from automated high-throughput large-scale molecular dynamics simulations, using Graph Neural Networks (GNN) with a physics-informed architecture. We demonstrate that this Physics-informed Graph Neural Network (PI-GNN) framework captures the underlying physics more accurately compared to existing phenomenological mobility laws in BCC metals.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Structure of International Simple Glass and properties of passivating layer formed in circumneutral pH conditions

Knowing the structure of a material is necessary to understand its evolution under various influences; here, the alteration by water of a reference glass of nuclear interest, called International Simple Glass (ISG), is studied. The ISG atomic structure has not yet been thoroughly characterized. Short- and medium-range order in this six-oxide glass was investigated by molecular dynamics (MD) methods. Combining the simulated data with experimental observations acquired from both pristine and altered ISG provided new insight into the formation of surface layers and passivation of the underlying glass. In the tested conditions of 90 °C, silica-saturated solution, and pH 90°C 7, the passivating layer partly inherits the structure of the pristine glass network despite the release of mobile elements (Na, B, and some Ca), with a reorganization of the silicate network following B release. The layer appears to minimize its internal energy by relaxing strain accumulated during glass quenching. The resulting passivated glass shows a strong resistance to hydrolysis. The nanopores of this hydrated material, displaying a mean pore size of ~1 nm, are filled with various water species. Water speciation determination inside the nanopores is therefore an achievement for future water dynamic study in the passivated glass.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Impact of alkali on the passivation of silicate glass

Amorphous silica-rich surface layers, also called gels, can passivate silicate glass and minerals depending on environmental conditions. However, several uncertainties remain on the mechanisms controlling the formation of these layers. In this paper, the influence of exogenous ions supplied by solutions is studied, both on the formation and on the properties of the gel formed on international simple glass (ISG). ISG was altered at 90 °C, pH 90 °C 7, in silica-saturated solutions containing various alkaline cations separately (Li + , Na + , K + , and Cs + ). The alteration kinetics observed with Li and Na in the solution is similar to that observed with no ions, while K and Cs in the solution tend to decrease glass alteration. Furthermore, for K or Cs ions, the kinetics decreases as the ionic strength of the solution increases. The passivation layer formed in these solutions shows a selectivity toward cations following the series K > Cs > Na >> Li. These alkalis replace Ca from pristine glass in the altered structures, leading to differences in [AlO4] - units charge compensation. Importantly, exchange between Ca and alkali also affects the total quantity of water inside each gel and this effect is well correlated with the observed drop in glass alteration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Morphological and nanomechanical changes in tungsten in high heat flux conditions

Abstract Morphological and nanomechanical alteration of tungsten in extreme environments, like those in edge localized modes in nuclear fusion environments, up to 46.3 GWm −2 heat fluxes were experimentally simulated using electrothermal plasma. Surface and subsurface damage to the tungsten is seen mainly in the form of pore formation, cracks, and resolidified melt instabilities. Mirco voids, rosette-type microfeatures, core-shell structure, particle enrichment, and submicron channels all manifest in the damaged subsurface. The formation of voids in the subsurface was determined to originate from the ductile fracture of hot tungsten by plastic flow but not developed to cracking. The voids were preferentially settled in grain boundaries, interfaces. The directionality of elongated voids and grains is biased to the heat flow vector or plasma pathway, which is the likely consequence of the thermally driven grain growth and sliding in the high-temperature conditions. The presence of a border between the transient layer and heat-affected zone is observed and attributed to plasma shock and thermal spallation of fractural tungsten at high temperature. Plasma peening-like hardening effects in tungsten were observed in the range of 22.7–46.3 GWm −2 but least in the case of the lowest heat flux, 12.5 GWm −2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine-learning-guided descriptor selection for predicting corrosion resistance in multi-principal element alloys

More than $270 billion is spent on combatting corrosion annually in the USA alone. As such, we present a machine-learning (ML) approach to down select corrosion-resistant alloys. Our focus is on a non-traditional class of alloys called multi-principal element alloys (MPEAs). Given the vast search space due to the variety of compositions and descriptors to be considered, and based upon existing corrosion data for MPEAs, we demonstrate descriptor optimization to predict corrosion resistance of any given MPEA. Our ML model with descriptor optimization predicts the corrosion resistance of a given MPEA in the presence of an aqueous environment by down selecting two environmental descriptors (pH of the medium and halide concentration), one chemical composition descriptor (atomic % of element with minimum reduction potential), and two atomic descriptors (difference in lattice constant (Δa) and average reduction potential). Our findings show that, while it is possible to down select corrosion-resistant MPEAs by using ML from a large search space, a larger dataset and higher quality data are needed to accurately predict the corrosion rate of MPEAs. This study shows both the promise and the perils of ML when applied to a complex chemical phenomenon like corrosion of alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Insights on the corrosion thermodynamics of chromium in molten LiF-NaF-KF eutectic salts

The thermodynamic stability of chromium in the Cr 0 , Cr 2+ , and Cr 3+ oxidation states considering various F - ion coordination compounds was investigated in molten LiF–NaF-KF (FLiNaK) eutectic salt. Potential fluoride ion activity (F - and CrF 3 - ) diagrams were constructed to predict the most stable Cr oxidation states as a function of anion activity, solvation state of chromium ions and potential at 600 °C. The Gibbs free energies of these compounds were estimated by utilizing a combined cyclic voltammetry – Nernst theory analysis approach in FLiNaK salt. To verify the constructed diagrams, X-ray diffraction was utilized after exposure of Cr at various applied potentials to determine whether compounds detected in solidified FLiNaK salts agreed with thermodynamic calculations. This work aims to identify key thermodynamic factors that are significant to chromium corrosion for molten salt nuclear reactor applications. The F - stability region spans the entire region where spontaneous corrosion of Cr occurs. Cr may be oxidized to Cr 2+ and Cr 3+ in the presence HF (due to moisture as an impurity) spontaneously except some conditions of p 1/2 H 2 /a HF etc. This situation is not changed qualitatively for various states of solvation between oxidized Cr solute in F - solvent and this aspect is substantially similar for the two cases (pair 1: Cr 0 /CrF 3 - / CrF 6 3- ; pair 2: Cr 0 /CrF 4 2- /CrF 5 2- ) considered in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ab initio-based metric for predicting the protectiveness of surface films in aqueous media

Abstract Materials can passivate by forming surface films when placed in aqueous media. However, these films may or may not be stable, and their stability can be predicted by a metric called the Pilling-Bedworth Ratio (PBR). In this article, we extend PBR to predict passivation protectiveness of multi-component materials. We then evaluate this PBR (ePBR)’s effectiveness by comparing its predictions against experimental studies of 21 multi-element materials of diverse chemistries, with agreement for 17 of the materials. Finally, we encode the methodology to compute ePBR in a web-application to predict the protectiveness of 140,000+ materials in the Materials Project database.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Unconventional and conventional quantum criticalities in CeRh 0.58 Ir 0.42 In 5

An appropriate description of the state of matter that appears as a second order phase transition is tuned toward zero temperature, viz. quantum-critical point (QCP), poses fundamental and still not fully answered questions. Experiments are needed both to test basic conclusions and to guide further refinement of theoretical models. Here, charge and entropy transport properties as well as AC specific heat of the heavy-fermion compound CeRh 0.58 Ir 0.42 In 5 , measured as a function of pressure, reveal two qualitatively different QCPs in a single material driven by a single non-symmetry-breaking tuning parameter. A discontinuous sign-change jump in thermopower suggests an unconventional QCP at p c1 accompanied by an abrupt Fermi-surface reconstruction that is followed by a conventional spin-density-wave critical point at p c2 across which the Fermi surface evolves smoothly to a heavy Fermi-liquid state. These experiments are consistent with some theoretical predictions, including the sequence of critical points and the temperature dependence of the thermopower in their vicinity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Tuning topological phase and quantum anomalous Hall effect by interaction in quadratic band touching systems

Interaction-driven topological phases significantly enrich the class of topological materials and thus are of great importance. Here in this paper, we study the phase diagram of interacting spinless fermions filling the two-dimensional checkerboard lattice with a quadratic band touching (QBT) point. By developing new diagnosis based on the state-of-the-art density-matrix renormalization group and exact diagonalization, we determine accurate quantum phase diagram for such a system at half-filling with three distinct phases. For weak nearest-neighboring interactions, we demonstrate the instability of the QBT towards an interaction-driven spontaneous quantum anomalous Hall (QAH) effect. For strong interactions, the system breaks the rotational symmetry realizing a nematic charge-density-wave (CDW) phase. Interestingly, for intermediate interactions we discover a symmetry-broken bond-ordered critical phase sandwiched in between the QAH and CDW phases, which splits the QBT into two Dirac points driven by interaction. Instead of the direct transition between QAH and CDW phases, our identification of an intermediate phase sheds new light on the theoretical understanding of the interaction-driven phases in QBT systems.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Multicomponent fluctuation spectrum at the quantum critical point in CeCu 6- x Ag x

Quantum critical points (QCPs) are widely accepted as a source of a diverse set of collective quantum phases of matter. The basic nature of a QCP is manifested in the critical fluctuation spectrum which in turn is determined by the adjacent phases and associated order parameters. Here we show that the critical fluctuation spectrum of CeCu 5.8 Ag 0.2 can not be explained by fluctuations associated with a single wave vector. Interestingly, when the critical fluctuations at wave vectors corresponding to the incommensurate antiferromagnetic order adjacent to the QCP are separated they are found to be three dimensional and to obey the scaling behavior expected for long wavelength fluctuations near an itinerant antiferromagnetic QCP. Without this separation, E/T scaling with a fractional exponent is observed. Together these results demonstrate that a multicomponent fluctuation spectrum is a previously unexplored route to obtaining E/T scaling at a QCP.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic and magnetic properties of the RuX3 (X = Cl, Br, I) family: two siblings—and a cousin?

Abstract Motivated by reports of metallic behavior in the recently synthesized RuI 3 , in contrast to the Mott-insulating nature of the actively discussed α -RuCl 3 , as well as RuBr 3 , we present a detailed comparative analysis of the electronic and magnetic properties of this family of trihalides. Using a combination of first-principles calculations and effective-model considerations, we conclude that RuI 3 , similarly to the other two members, is most probably on the verge of a Mott insulator, but with much smaller magnetic moments and strong magnetic frustration. We predict the ideal pristine crystal of RuI 3 to have a nearly vanishing conventional nearest-neighbor Heisenberg interaction and to be a quantum spin liquid candidate of a possibly different kind than the Kitaev spin liquid. In order to understand the apparent contradiction to the reported resistivity ρ , we analyze the experimental evidence for all three compounds and propose a scenario for the observed metallicity in existing samples of RuI 3 . Furthermore, for the Mott insulator RuBr 3, we obtain a magnetic Hamiltonian of a similar form to that in the much-discussed α -RuCl 3 and show that this Hamiltonian is in agreement with experimental evidence in RuBr 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plethora of tunable Weyl fermions in kagome magnet Fe 3 Sn 2 thin films

Interplay of magnetism and electronic band topology in unconventional magnets enables the creation and fine control of novel electronic phenomena. In this work, we use scanning tunneling microscopy and spectroscopy to study thin films of a prototypical kagome magnet Fe 3 Sn 2 . Our experiments reveal an unusually large number of densely-spaced spectroscopic features straddling the Fermi level. These are consistent with signatures of low-energy Weyl fermions and associated topological Fermi arc surface states predicted by theory. By measuring their response as a function of magnetic field, we discover a pronounced evolution in energy tied to the magnetization direction. Electron scattering and interference imaging further demonstrates the tunable nature of a subset of related electronic states. Our experiments provide a direct visualization of how in-situ spin reorientation drives changes in the electronic density of states of the Weyl fermion band structure. Combined with previous reports of massive Dirac fermions, flat bands, and electronic nematicity, our work establishes Fe 3 Sn 2 as an interesting platform that harbors an extraordinarily wide array of topological and correlated electron phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Majorana modes with side features in magnet-superconductor hybrid systems

Magnet-superconductor hybrid (MSH) systems represent promising platforms to host Majorana zero modes (MZMs), the elemental building blocks for fault-tolerant quantum computers. Theoretical description of such MSH structures is mostly based on simplified models, not accounting for the complexity of real materials. Here, based on density functional theory, we derive a superconducting 80-band model to study an MSH system consisting of a magnetic manganese chain on the s wave superconductor niobium. For a wide range of values of the superconducting order parameter, the system is a topological superconductor, with MZMs exhibiting non-universal spatial patterns and a drastic accumulation of spectral weight on both sides along the magnetic chain. These side feature states can be explained by an effective model which is guided by the ab initio results. Performing scanning tunneling spectroscopy experiments on the same system, we observe a spatial structure in the low-energy local density of states that is consistent with the theoretical findings. Our results open a first-principle approach to the discovery of topological superconductors.

36 MATERIALS SCIENCE↗