Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “logistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Light Water Reactor Sustainability Program Potential to Extend the Range of Established Online Monitoring Technologies, Such as Guided Waves in Nuclear Power Plant Systems

The Light Water Reactor Sustainability Program began to evaluate technologies that could be used to perform online monitoring of piping and other secondary system structural components in commercial NPPs. These online monitoring systems have the potential to identify when a more detailed inspection is needed using real-time measurements, rather than at a pre-determined inspection interval. This transition to condition-based, risk informed automated maintenance will contribute to a significant reduction of operations and maintenance costs that account for most nuclear power generation costs. This report describes the current state of research related to ultrasonic guided wave testing and its application to defect detection in commercial nuclear power plants. The report analyses the applicability of the guided wave technology to secondary piping systems and also study the potential for expanding the range of guided wave technology to include bent piping and other piping components. The ultrasonic guided waves can inspect long stretches of straight piping, however more complex geometries such as elbows, welds, and tees are causing spurious reflections and coherent noise which significantly decrease the sensitivity of the technique. The report analyses two approaches to suppression of coherent noise in guided wave systems: advanced signal processing and pattern recognition based on independent component analysis and blind source separation and hardware-based technique of piezoelectric paint which can be used to facilitate the propagation of mechanical stress waves through piping. It is demonstrated on simulated guided wave data that the independent component analysis is capable of separating different coherent noise components and segregating them from useful signal. The piezoelectric paint approach seem to be a viable alternative to the signal processing methods, however it requires significantly more complicated logistics and initial financial outlay. The future efforts will be concentrated on applying the independent component analysis to real-world guided wave data recorded by the guided wave monitoring system installed on the shell of the low-pressure feedwater heater 13A at Exelon Corporation’s Braidwood Nuclear Generating Station. Also, the joint EPRI-INL research efforts will focus on experimental evaluation of piezoelectric paint as a technique to extend the range of guided wave technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Overhead longwave infrared hyperspectral material identification using radiometric models

Material detection algorithms used in hyperspectral data processing are computationally efficient but can produce relatively high numbers of false positives. Material identification performed as a secondary processing step on detected pixels can help separate true and false positives. This paper presents a material identification processing chain for longwave infrared hyperspectral data of solid materials collected from airborne platforms. The algorithms utilize unwhitened radiance data and an iterative algorithm that determines the temperature, humidity, and ozone of the atmospheric profile. Pixel unmixing is done using constrained linear regression and Bayesian Information Criteria for model selection. The resulting product includes an optimal atmospheric profile and full radiance material model that includes material temperature, abundance values, and several fit statistics. A logistic regression method utilizing all model parameters to improve identification is also presented. This paper details the processing chain and provides justification for the algorithms used. Several examples are provided using modeled data at different noise levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilizing Commercial Real Estate Owner and Investor Data to Analyze the Financial Performance of Energy Efficient, High-Performance Office Buildings

Evidence has shown that owning and operating energy-efficient, high-performance, “green” properties results in multiple benefits including lower utility bills, higher rents, improved occupancy, and greater net operating income. However, it is difficult to isolate and control moderating factors to identify the specific drivers behind improved financial performance and value to investors that results from sustainability in real estate. DOE is interested in facilitating deeper investigation of the correlation between energy efficiency and financial performance, reducing data acquisition and matching challenges, and developing a stronger understanding of how sustainable design and energy efficiency impact value. DOE commissioned this pilot study to test the logistical and empirical procedures required to establish a Commercial Real Estate Data Aggregation & Trends Analysis lab, determine the potential benefits available through the lab, and contribute to the existing body of evidence in this field.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Stormwater Pollution Prevention Plan for the TA-03-38 Carpenter's Shop, Los Alamos National Laboratory, Revision 3 Final, January 2018

The TA-03-38 CS is part of LANL’s Utilities and Infrastructure (UI) Facilities Operations Directorate (FOD) with day-to-day management provided by the Logistics Division Central Shops (LOG-CS); which has established a Stormwater Pollution Prevention Team (PPT) whose members are responsible for assisting the facility manager in developing and revising the facility’s SWPPP as well as maintaining control measures and taking corrective actions when required. All PPT members will have access to either a hard copy or an electronic version of this SWPPP. A list of PPT members along with duties and contact information is provided in Appendix A of this SWPPP.

54 ENVIRONMENTAL SCIENCES↗

Stormwater Pollution Prevention Plan for the TA-03-38 Metals Fabrication Shop, Los Alamos National Laboratory, Revision 3 Final, January 2018

The TA-03-38 MFS is part of LANL’s Utilities and Infrastructures (UI) Facilities Operations Directorate (FOD) with day-to-day management provided by the Logistics Division Central Shops (LOG-CS); which has established a Stormwater Pollution Prevention Team (PPT) whose members are responsible for assisting the facility manager in developing and revising the facility’s SWPPP as well as maintaining control measures and taking corrective actions when required. All PPT members will have access to either a hard copy or an electronic version of this SWPPP. A list of PPT members along with duties and contact information is provided in Appendix A of this SWPPP.

54 ENVIRONMENTAL SCIENCES↗

Stormwater Pollution Prevention Plan for the TA-60-02 Salvage/Warehouse, Los Alamos National Laboratory, Revision 3 Final, January 2018

The TA-60-02 Salvage/Warehouse is part of LANL’s Utilities and Infrastructures (UI) Facilities Operations Directorate (FOD) with day-to-day management provided by the Logistics Division Central Shops (LOG -CS); which has established a Stormwater Pollution Prevention Team (PPT) whose members are responsible for assisting the facility manager in developing and revising the facility’s SWPPP as well as maintaining control measures and taking corrective actions when required. All PPT members will have access to either a hard copy or an electronic version of this SWPPP. A list of PPT members along with duties and contact information is provided in Appendix A of this SWPPP.

54 ENVIRONMENTAL SCIENCES↗

Frontier Observatory for Research in Geothermal Energy: Phase 1 Topical Report Fallon, NV

The Department of Energy (DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is to be a dedicated site where the subsurface scientific and engineering community can develop, test, and improve technologies and techniques for the creation of cost-effective and sustainable enhanced geothermal systems (EGS) in a controlled, ideal environment. The establishment of FORGE will facilitate development of an understanding of the key mechanisms controlling a successful EGS. Execution of FORGE is occurring in three phases with five distinct sub-phases (1, 2A, 2B, 2C, and 3). This report focuses on Phase 1 activities. During Phase 1, critical technical and logistical tasks necessary to demonstrate the viability of the Fallon FORGE Project site were completed and the commitment and capability of the Fallon FORGE team to execute FORGE was demonstrated. As part of Phase 1, the Fallon FORGE Team provided an assessment of available relevant data and integrated these geologic and geophysical data to develop a conceptual 3-D geologic model of the proposed test location. Additionally, the team prepared relevant operational plans for full FORGE implementation, provided relevant site data to the science and engineering community, engaged in outreach and communications with interested stakeholders, and performed a review of the environmental and permitting activities needed to allow FORGE to progress through Phase 3. The results of these activities are provided as Appendices to this report. The Fallon FORGE Team is diverse, with deep roots in geothermal science and engineering. The institutions and key personnel that comprise the Fallon FORGE Team provide a breadth of geoscience and geoengineering capabilities, a strong and productive history in geothermal research and applications, and the capability and experience to manage projects with the complexity anticipated for FORGE. Fallon FORGE Team members include the U.S. Navy, Ormat Nevada Inc., Sandia National Laboratories (SNL), Lawrence Berkeley National Laboratory (LBNL), the United States Geological Survey (USGS), the University of Nevada, Reno (UNR), GeothermEx/Schlumberger (GeothelinEx), and Itasca Consulting Group (Itasca). The site owners (through direct land ownership or via applicable permits)—the U.S. Navy and Ormat Nevada Inc.—are deeply committed to expanding the development of geothermal resources and are fully supportive of FORGE operations taking place on their lands.

15 GEOTHERMAL ENERGY↗

Marine Mammal Behavioral Response to Tidal Turbine Sound

The sound emitted by tidal turbines overlaps with the generalized hearing ranges for marine mammals and may, consequently, affect marine mammal behavior. Because of the strong environmental protections for marine mammals, these effects are of interest to resource agencies and project developers. The primary goal of this project is to improve the understanding of how sound emitted by tidal turbines may affect marine mammal behavior, with the intent that such understanding may allow this environmental risk to be “retired” for initial demonstrations and arrays. A secondary project goal is to evaluate the efficacy of marine mammal observations from a shore-based vantage point as a method to detect change as a consequence of marine energy stressors. Three, two-week trials were conducted across spring, summer and autumn of 2017 during which vantage-point observations of marine mammals were made from land. We refer to these two-week periods as ‘trials’ as they represent different periods of field data collection. These observations consisted of scan samples every 10 minutes with a set of binoculars and a DSLR camera. When pinnipeds were sighted, still images were taken. When harbor porpoise were sighted, focal follows using video were initiated. These data were later analyzed to estimate the location of animals sighted using photogrammetric techniques. For approximately half of each trial period, a boat was moored in the study area from which an underwater projector was used to play back tidal turbine sounds at a broadband source level of 158 dB re µPa @ 1 m. The other half of each trial period had no playbacks and was used as a control period. During the control and playback periods, ancillary data were collected in the study area near the sea floor (ambient noise, tidal velocity, and porpoise clicks) while weather and vessel tracks were recorded near the vantage-point station. Harbor seals did not show a significant response to the simulated turbine noise, nor did harbor porpoise change their closest point of approach or change the direction/deviation of the paths during periods when the playback was occurring. While porpoise sightings and porpoise acoustic detections were significantly reduced during playback periods in the first two trials, the number of detections during the playback periods increased during the third trial. Similarly, the calculated distance from porpoises to the playback location suggests that harbor porpoises avoided an area around the playback location of approximately 300 m during Trial 1, which decreased to approximately 100 m in Trial 2, and disappeared in Trial 3. This could be an indication of habituation or increased tolerance, either to the playback sound or the vessel presence. Our finding of no significant effect of turbine noise on harbor seals contrast with the findings in a previous study by Hastie et al. (2017) conducted in United Kingdom waters. However, due to substantive differences in source levels and propagation loss, seals in our study would need to have been within 10 m of the playback location to experience similar received levels to those in the Hastie et al. study. Consequently, the two studies may actually be in agreement. Our findings of significant effect of turbine noise on harbor porpoise are in line with previous studies suggesting the harbor porpoise are sensitive to noise. However, we note that, due to cost and logistical constraints, the playback vessel was only mooring during the playback periods. Consequently, we cannot definitively ascribe the changes in porpoise behavior to the simulated turbine noise, playback vessel presence, or a combination of both factors. This methodological limitation and other lessons learned are discussed to benefit future studies that explore the effects of acoustic stressors on marine mammals.

16 TIDAL AND WAVE POWER↗

Sun Grant/DOE Regional Feedstock Partnership: Final Technical Report

The U.S. Department of Energy (DOE) and the Sun Grant Initiative initiated the Regional Feedstock Partnership (referred to as the Partnership) in 2007 primarily to address information gaps associated with the likelihood for realization of the sustainable and reliable production of a billion-tons of biomass annually to support the U.S. bioenergy industry by the year 2030. Publication of The Technical Feasibility of a Billion-Ton Annual Supply (Perlack et al., 2005) in 2005, with its associated yield assumptions, led to the realization that the yield goals and assumptions utilized in that analysis required careful validation. To achieve the overall goal of validating key yield assumptions, the following objectives were developed: 1. Establishment of replicated field trials across regions to determine the impact of crop residue removal (primarily corn and small grains) on future grain yields and soil health. 2. Establishment of replicated field trials of some of the most promising dedicated energy crops (herbaceous annuals and perennials, as well as woody perennials) to demonstrate the potential performance of these feedstocks across the U.S. 3. Assessment of feedstock resources to be used to estimate a sustainable national supply potential. Teams composed of representatives from Land Grant Universities, USDA ARS, DOE National Laboratories, industry, and other federal agencies were identified and assembled to address each of these objectives. For Objective 1, members of the USDA ARS’ Resilient Economic Agricultural Practices (REAP) team combined with university personnel to leverage on-going work and established new trials to determine sustainable corn residue removal rates. In addition, universities across the continental U.S. conducted surveys of published past research to define parameters for the use of cereal grain residue (primarily wheat) as a biomass feedstock. For Objective 2, and based on input from DOE, USDA, Land Grant university scientists, and others, several herbaceous and woody energy crop species were selected for new or further evaluation across wide geographic areas as cellulosic feedstock sources. Species teams were organized to assess the yield potential of candidate herbaceous feedstocks including sorghum, energycane, Miscanthus x giganteus (hereafter referred to as miscanthus), switchgrass, and mixed perennial species (primarily grasses and some legumes) on Conservation Reserve Program (CRP) land. Woody species will be critical components of the bioenergy sector; therefore, species teams were also organized for shrub willow and hybrid poplar (Populus spp.). Field trials of each species were utilized to determine yield potential across the U.S. For Objective 3, a GIS resource team was organized with representatives from each of the five Sun Grant regions. While some regional assessments were made, the multi-institutional team decided that the group from Oregon State University would utilize their PRISM ELM model to estimate national yield potential of the various species evaluated. The following are key outcomes and impacts • The Partnership demonstrated the production potential of diverse herbaceous and woody feedstocks across much of the U.S. for 5-7 consecutive growing seasons. Long-term studies such as this are not commonly possible due to limitations in funding cycles. • Long-term field trials were valuable in demonstrating the importance of agronomic management practices and genetic resources to yield of sorghum, switchgrass, miscanthus, energycane, CRP mixed perennial grasses, poplar, and willow. • National yield potential maps were developed for all species evaluated in the Partnership. • Sustainable corn stover removal rates were quantified for use by producers, harvesters, and commercial lignocellulosic biorefineries. • Data from the Partnership field trials not only validated initial Billion Ton estimates, but were instrumental in developing both the Billion Ton Update in 2011, and especially the 2016 Billion Ton Report. • The Partnership provided the opportunity to assemble and conserve a poplar germplasm collection that contains more than 20,000 clones for use in breeding programs. New clones resulting from crosses made using this germplasm collection have resulted in significantly improved cultivars that could be scaled up and deployed. • Further validation of improved yields of new varieties/cultivars of biomass sorghum, energycane, hybrid poplars, and shrub willows was produced by the Partnership. • The Partnership demonstrated the potential of energycane in northern parts of the southeastern U.S., particularly in relation to sugarcane varieties. • For certain feedstocks (e.g., CRP mixed grasses, switchgrass, willow, and poplar), production economics were ascertained through Partnership field trials. • Biomass samples collected as part of the Partnership are also being used to populate Idaho National Laboratory’s Bioenergy Feedstock Library. • Because of the size and scope of the Partnership, workforce development was a key component and outcome. Numerous undergraduate students (25), graduate students (15 MS and 8 PhD), and postdoctoral researchers (7) were trained by Partnership participants. This will help to prepare individuals for careers in the emerging fields of plant breeding, biomass production, feedstock supply logistics, and biomass conversion processes. • More than 130 scientific publications have been authored by Partnership team members. Numerous other presentations, outreach publications, book chapters, and websites have also been developed to further the continued development of the bioeconomy.

09 BIOMASS FUELS↗

Underground Test Area Activity Sampling Technologies Evaluation Report, Nevada National Security Site, Nye County, Nevada, Revision 0

This report presents the results of the next stage of sampling technology evaluations as described in Underground Test Area Activity Sampling Technologies Methods Plan (N-I, 2014b). Testing of the BESST Blatypus system was originally planned; however, communications with the vendor indicated it is premature for the UGTA Activity to field test this technology. The system currently uses latex tubing and nitrogen gas to push the water to the surface. The large amount of nitrogen gas needed due to the depths of the UGTA wells makes this unfeasible. Also, the latex tubing will likely not hold up in steel tubing. Instead, three technologies were evaluated: depth-discrete bailer, jack pump, and submersible pump. Each of these is a proven technology for certain conditions. The evaluation includes logistical and operational data collected during the purging of the well or completion interval and groundwater sampling at three wells.

54 ENVIRONMENTAL SCIENCES↗

Neutral Current Elastic Scattering and the Strange Spin Structure of the Proton

Neutrinos can be used as a unique and informative probe of the structure within nucleons. This thesis presents the tools and methodology for studying the strange quark spin in the nucleon through neutral current elastic neutrino-proton scattering in the MicroBooNE experiment located at the Fermi National Accelerator Lab. An automated boosted decision tree based proton identification algorithm is used to select proton in liquid argon TPC data with a 70\% efficiency. After a set of protons are selected, a logistic regression model is used to select neutral current elastic proton interactions in MicroBooNE. Neutral current elastic proton interactions are selected with an 11\% efficiency and 30\% purity. The number of selected events measured in MicroBooNE data as a function of $Q^2$ is compared directly to the number of selected events in MicroBooNE simulation. An event reweighting scheme is used to vary the expected number of eventsin MicroBooNE simulation based on the values o f the physics parameters of interest. The likelihood for any given value of the physical parameters can then be easily calculated and the probability distributions of the physics parameters can be sampled using Markov Chain Monte Carlo. Future improvements to the detector physics models in MicroBooNE are required for a precise determination of the strange quark spin structure in the proton. With the current level of uncertainty on the detector physics models, we are only able to constrain the net strange quark spin, $\Delta s$ to the range $-1.8 < \Delta s < 3.8$ with 95\% confidence.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

9 th American Conference on Neutron Scattering (ACNS 2018)

The 9th American Conference on Neutron Scattering (ACNS) was held June 24-28, 2018 in College Park, Maryland. The meeting was coordinated by the Neutron Scattering Society of America (NSSA) and attracted 335 registered attendees. The meeting was chaired by NSSA vice president Patrick Woodward (The Ohio State University) assisted by NSSA president Despina Louca (University of Virginia, NSSA secretary Katherine Page (Oak Ridge National Laboratory), and local organizing chairs Rob Briber (University of Maryland) and Peter Gehring (NIST Gaithersburg). As in past years, the Materials Research Society assisted with planning, logistics and operation of the conference. The meeting schedule consisted of a morning common session featuring a lecture by a scientist receiving an award from the NSSA and a plenary lecture. The remainder of the scientific program consisted of four parallel sessions featuring invited and contributed talks together with poster sessions in the afternoon / evening. The science program was coordinated by program co-chairs Efrain Rodriguez (University of Maryland) and Matt Helgeson (University of California Santa Barbara) and was divided into the following research areas: (a) Advances in Neutron Methods; (b) Hard Condensed Matter; (c) Soft Matter; (d) Biological Structures and Dynamics; (e) Neutrons for Energy and Sustainability; (f) Materials Chemistry and Synthesis; (g) Structural Materials and Engineering; and (h) Neutron Physics.

36 MATERIALS SCIENCE↗

Hydrogen Fuel-Cell Electric Hybrid Truck Demonstration (Final Technical Report)

The purpose of the project was to demonstrate three (3) fully developed, operational, advanced vehicle technology prototypes for ON-ROAD goods movement applications. The major vehicle OEM for this demonstration was Navistar International Trucks, with the fuel cell and power control hybrid technology provided and integrated by US Hybrid. CEM was to provide independent data collection and analysis, while EDF would provide education, outreach, and communication for the project. GTI managed the partnership and arranged for hydrogen fuel for the demonstration. The drayage truck is used to transfer the cargo container from/to ports in a warehouse or logistic yard. For port facilities in the Port of Houston Area, as well as virtually all other ports, drayage trucks often queue for long periods, inching along at slow speeds to await loading and unloading. During this process, the trucks are essentially idle, with conventional diesel engines continuously running and producing accompanying emissions. The ZECT would essentially power off during idle periods, or at least utilize minimal electric energy. As such, range limitation by using a gaseous fuel would be mitigated by the fact that the vehicle is not using fuel during much of its duty cycle. The project team expected the vehicle range to be about 200 miles which is well within the duty cycle requirements of the original fleet partner, Richardson Trucking. The project was intended to demonstrate commercialization and production potential, and to clearly illustrate the selected vehicle technology’s potential to reduce GHG emissions and petroleum use if implemented widely. To achieve this, the project team proposed a two-year demonstration project in the Port of Houston area to assess and track vehicle performance, and evaluate fuel savings, petroleum reduction, and emissions reduction benefits of the prototype technology. Additional time at the front end of the project was required for vehicle and support infrastructure preparation. In June 2017 the remaining project partners, which now included Air Liquide, agreed that the project would be unlikely to move forward with the vehicle demonstration, primarily due to the lack of a viable cargo truck fleet partner in the Port of Houston area willing to make a sufficient commitment of resources to operate the vehicles for the demonstration.

08 HYDROGEN↗

NETL Fischer-Tropsch Black Box Model

The purpose of the Fischer-Tropsch (F-T) Black Box Model is to allow for the screening of the impacts of F-T finished fuels production based on the input of a unique syngas composition. Utilizing the composition of the raw syngas, the model calculates the following outputs based on a facility sized to produce 50,000 bbl/day of liquid product: CO2 emissions, liquid product flows, required syngas input, and the net export electricity from the facility. NETL completed this model/study for the Connecticut Center for Advanced Technology (CCAT) to provide techno-economic and life cycle analysis modeling support for CBTL alternative jet fuel production, which forms key references to their report to the Defense Logistics Agency (their project sponsor/funder).

10 SYNTHETIC FUELS↗

NETL Fischer-Tropsch Black Box Model Documentation

The purpose of the Fischer-Tropsch (F-T) Black Box Model is to allow for the screening of the impacts of F-T finished fuels production based on the input of a unique syngas composition. Utilizing the composition of the raw syngas, the model calculates the following outputs based on a facility sized to produce 50,000 bbl/day of liquid product: CO 2 emissions, liquid product flows, required syngas input, and the net export electricity from the facility. NETL completed this model/study for the Connecticut Center for Advanced Technology (CCAT) to provide techno-economic and life cycle analysis modeling support for CBTL alternative jet fuel production, which forms key references to their report to the Defense Logistics Agency (their project sponsor/funder).

10 SYNTHETIC FUELS↗

New X-Ray Spectrometer Developed

X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) are useful tools for characterizing numerous properties of a given material. They can give elemental composition, metal oxidation states, spin state, orbital occupancy, and more. A drawback is that these types of measurements have historically needed synchrotron light sources to generate high flux X-ray beams and high-resolution monochromators to provide a monoenergetic excitation source. Synchrotrons are building-sized facilities (often operated in the U.S. by the DOE) and have the scheduling complexities and logistical issues that accompany any large-scale research facility. There are added challenges for scientists wishing to analyze radioactive samples such as plutonium or other actinides. These limitations are now mitigated by a small, “portable” X-ray emission and absorption spectrometers developed by Los Alamos scientists and the University of Washington.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comprehensive Analysis of Coal and Biomass Conversion to Jet Fuel: Oxygen Blown, Transport Reactor Integrated Gasifier (TRIG) and Fischer-Tropsch (F-T) Catalyst Configurations Modeled and Validated Scenarios

This study evaluates the technological/process, life cycle environmental, and economic perspective of 20 discreet F-T jet fuel production scenarios. The technological/process model provides a process level evaluation of the 10 alternate CBTL facility scenarios considered in this study. Aspen Plus simulation models for the CBTL facility scenarios were developed to determine the composition and flows of all of the major streams in the plants. These were used to develop conceptual level cost estimates for capital and operating costs for the major process units. NETL completed this study for the Connecticut Center for Advanced Technology (CCAT) to provide techno-economic and life cycle analysis modeling support for CBTL alternative jet fuel production, which forms key references to their report to the Defense Logistics Agency (their project sponsor/funder).

01 COAL, LIGNITE, AND PEAT↗

Comprehensive Analysis of Coal and Biomass Conversion to Jet Fuel: Oxygen Blown, Entrained-Flow Gasifier (EFG) and Fischer-Tropsch (F-T) Catalyst Configurations Modeled and Validated Scenarios

This study evaluates the technological/process, life cycle environmental, and economic perspective of 10 discreet F-T jet fuel production scenarios. The technological/process model provides a process level evaluation of the 10 alternate CBTL facility scenarios considered in this study. Aspen Plus simulation models for the CBTL facility scenarios were developed to determine the composition and flows of all of the major streams in the plants. These were used to develop conceptual level cost estimates for capital and operating costs for the major process units. NETL completed this study for the Connecticut Center for Advanced Technology (CCAT) to provide techno-economic and life cycle analysis modeling support for CBTL alternative jet fuel production, which forms key references to their report to the Defense Logistics Agency (their project sponsor/funder).

01 COAL, LIGNITE, AND PEAT↗