Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Proper orthogonal decomposition analysis of parallel twin jets measured using particle image velocimetry - 18685

The mixing of turbulent jets has been found in several locations of High Temperature Gas-cooled Reactors (HTGRs) including upper and lower plenums, where jets impinge into open space from coolant channels. In the present work, a parallel twin jets experimental facility was used to generate velocity field of mixing jets by means of Particle Image Velocimetry (PIV), which can be eventually used for validation of Computational Fluid Dynamics (CFD) simulations. The facility has two fixed parallel rectangular jet nozzles (5.8 mm in width, 87.8 mm in length) submerged in the middle of the water tank, which allows an assumption of free jet mixing. In order to compare the experimental data produced to existing data, Re = 4000 {approx} 5000 at the jet outlet was selected. In the past, several statistically meaningful data have been reported using Laser Doppler Velocimetry (LDV) and Hot Wire Anemometer (HWA), which can support Reynolds Averaged Navier-Stokes turbulent models. However, recent CFD simulations using Large Eddy Simulation (LES) require high resolution experimental data in time and space. Thus, in this study, in addition to statistically enough number of data sets for RANS models validation, high temporal and spatial resolution data were collected for the validation of LES calculations. In order to study the turbulent structure Reynolds decomposition and Proper Orthogonal Decomposition (POD) were applied to the data obtained. These decomposition analyses visualized multi-scale vortices and the transportation of eddies. In terms of twin jets structure, the present experimental data showed good agreement with other techniques for the important characteristic parameters including the length of the converging region and the location of the merging point. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

COMPUTATIONAL MODELING OF IGNITION AND PREMIXED FLAME PROPAGATION INITIATED BY A PRE-CHAMBER TURBULENT JET

Addressing the pressing need for reduced carbon emissions, Turbulent Jet Ignition (TJI) emerges as a promising technology for ultra-lean combustion, offering enhanced thermal efficiencies and minimized cyclic variability in spark-ignited engines. To facilitate rapid testing and integration of this technology, a robust computational modeling framework is crucial. This study delves into the predictive capabilities of computational models for main-chamber ignition and premixed flame propagation using a single-cycle TJI rig measured by Biswas et al. (Applied Thermal Engineering, vol 106, 2016). Employing an open-source compressible flow simulation solver with Large Eddy Simulation (LES) for turbulence modeling, the investigation integrates the conventional Laminar Finite Rate Chemistry (LFRC) model alongside the transported Probability Density Method (PDF) for turbulence-chemistry interaction. A fully-consistent Eulerian Monte-Carlo Fields (EMCF) method is utilized to approximate the transported PDF, while Interaction by Exchange with Mean is employed to close micro-mixing terms in stochastic differential equations. A reduced chemical reaction mechanism with 21 species and 84 reactions (DRM-19) is used for solving chemical kinetics, and a double Gaussian energy deposition model is used to approximate the spark ignition in the pre-chamber. An unstructured O-grid mesh with 0.3 million cells in the prechamber and 1 million cells in the main chamber is employed. Results are divided into two phases: pre-chamber initialization and full TJI simulations. Validation of the predicted pre-chamber flame propagation and the lean ignition in the main-chamber is carried out by using available experimental data. Under quiescent conditions, both the LFRC and transported PDF methods largely underestimate the flame speed and subsequent pressure growth in the pre-chamber. A linear momentum forcing technique is applied to investigate the impact of initial turbulence in the pre-chamber, demonstrating a notable influence on flame propagation. Fine-tuning of the forcing coefficient reproduces the sudden pressure growth observed in the experiment. The experimentally validated pre-chamber simulation serves as the initial condition for the full TJI simulations. It is found that the LFRC model fails to predict lean-ignition in the main-chamber, resulting in a misfiring event. Incorporation of turbulence-chemistry interaction using the transported PDF method substantially improves the prediction of the ignition event in the main-chamber, achieving fair qualitative agreement and quantitative validation of combustion parameters within ±10% of the reported experimental data. The rich simulation results consisting of a full set of statistical description of the thermo-chemical states enable us to gain deep insights into the ignition mechanisms in the main chamber, which is limited when done experimentally. A novel dual ignition phenomenon is revealed in the TJI rig for the first time. Initially, a primary ignition kernel is formed at a downstream location which eventually detaches from the main jet. As the jet momentum decreases, a secondary ignition event follows, this time at a more upstream location which eventually combines with the primary ignition kernel to form a single connected flame front. Investigation of these ignition sequences in chemical composition space reveal distinct differences between the two. The primary ignition event in the main-chamber is followed by a large concentration of active radicals from the pre-chamber jet, accelerating the chain-branching steps, characterizing what has been referred to as flame ignition. In contrast, the secondary ignition occurs in the absence of active radicals in the pre-chamber jet, hence characterized as jet ignition. Further analysis of the effect of pre-chamber jet characteristics on lean ignition in the main-chamber is conducted by setting up cases with different initial pressure ratios (por) between the two chambers, a non-dimensional parameter, ranging from 1.2 to 3.2. As the initial pressure ratio increases, jet momentum increases, with dual ignition observed in cases above por= 2.2. Case with por= 3.2 lead to misfiring. The effect of ignition sequence on global combustion characteristics of TJI is analyzed. Dual ignition events lead to non-monotonicity in combustion characteristics such as global reaction progress variable, flame penetration, and global heat release rate. In dual ignition events, although the rate of fuel consumption and global heat release rate is initially lower, the secondary ignition leads to a sudden increase in flame surface area, resulting in a sudden jump and promoting the overall performance of the TJI system.

42 ENGINEERING↗

Going off topics to demix quark and gluon jets in α S extractions

Quantum chromodynamics is the theory of the strong interaction between quarks and gluons; the coupling strength of the interaction, α S , is the least precisely-known of all interactions in nature. An extraction of the strong coupling from the radiation pattern within jets would provide a complementary approach to conventional extractions from jet production rates and hadronic event shapes, and would be a key achievement of jet substructure at the Large Hadron Collider (LHC). Presently, the relative fraction of quark and gluon jets in a sample is the limiting factor in such extractions, as this fraction is degenerate with the value of αS for the most well-understood observables. To overcome this limitation, we apply recently proposed techniques to statistically demix multiple mixtures of jets and obtain purified quark and gluon distributions based on an operational definiton. We illustrate that studying quark and gluon jet substructure separately can significantly improve the sensitivity of such extractions of the strong coupling. We also discuss how using machine learning techniques or infrared- and collinear-unsafe information can improve the demixing performance without the loss of theoretical control. While theoretical research is required to connect the extract topics with the quark and gluon objects in cross section calculations, our study illustrates the potential of demixing to reduce the dominant uncertainty for the α S extraction from jet substructure at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identifying quenched jets in heavy ion collisions with machine learning

Measurements of jet substructure in ultra-relativistic heavy ion collisions suggest that the jet showering process is modified by the interaction with the quark-gluon plasma. Modifications of the hard substructure of jets can be explored with modern data-driven techniques. In this study, a machine learning approach to the identification of quenched jets is designed. Jet showering processes are simulated with a jet quenching model JEWEL and a non-quenching model PYTHIA 8. Sequential substructure variables are extracted from the jet clustering history following an angular-ordered sequence and are used in the training of a neural network built on top of a long short-term memory network. We show that this approach successfully identifies the quenching effect in the presence of the large uncorrelated background of soft particles created in heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the angle between jet axes in pp collisions at $ \sqrt{s}$ = 5.02 TeV

This article reports measurements of the angle between differently defined jet axes in pp collisions at $\sqrt{s}$ = 5.02 TeV carried out by the ALICE Collaboration. Charged particles at midrapidity are clustered into jets with resolution parameters R = 0.2 and 0.4. The jet axis, before and after Soft Drop grooming, is compared to the jet axis from the Winner-Takes-All (WTA) recombination scheme. The angle between these axes, ΔR axis , probes a wide phase space of the jet formation and evolution, ranging from the initial high-momentum-transfer scattering to the hadronization process. The ΔR axis observable is presented for 20 < $p^{ch jet}_{T}$ < 100 GeV/c, and compared to predictions from the PYTHIA 8 and Herwig 7 event generators. The distributions can also be calculated analytically with a leading hadronization correction related to the non-perturbative component of the Collins-Soper-Sterman (CSS) evolution kernel. Comparisons to analytical predictions at next-to-leading-logarithmic accuracy with leading hadronization correction implemented from experimental extractions of the CSS kernel in Drell-Yan measurements are presented. The analytical predictions describe the measured data within 20% in the perturbative regime, with surprising agreement in the non-perturbative regime as well. These results are compatible with the universality of the CSS kernel in the context of jet substructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Is infrared-collinear safe information all you need for jet classification?

Machine learning-based jet classifiers are able to achieve impressive tagging performance in a variety of applications in high-energy and nuclear physics. However, it remains unclear in many cases which aspects of jets give rise to this discriminating power, and whether jet observables that are tractable in perturbative QCD such as those obeying infrared-collinear (IRC) safety serve as sufficient inputs. In this article, we introduce a new classifier, Jet Flow Networks (JFNs), in an effort to address the question of whether IRC unsafe information provides additional discriminating power in jet classification. JFNs are permutation-invariant neural networks (deep sets) that take as input the kinematic information of reconstructed subjets. The subjet radius and a cut on the subjet’s transverse momenta serve as tunable hyperparameters enabling a controllable sensitivity to soft emissions and nonperturbative effects. We demonstrate the performance of JFNs for quark vs. gluon and Z vs. QCD jet tagging. For small subjet radii and transverse momentum cuts, the performance of JFNs is equivalent to the IRC-unsafe Particle Flow Networks (PFNs), demonstrating that infrared-collinear unsafe information is not necessary to achieve strong discrimination for both cases. As the subjet radius is increased, the performance of the JFNs remains essentially unchanged until physical thresholds that we identify are crossed. For relatively large subjet radii, we show that the JFNs may offer an increased model independence with a modest tradeoff in performance compared to classifiers that use the full particle information of the jet. These results shed new light on how machines learn patterns in high-energy physics data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Small radius inclusive jet production at the LHC through NNLO+NNLL

The study of hadronic jets and their substructure at hadronic colliders is crucial for improving our understanding of QCD, and searching for new physics. As such, there has been a significant effort to improve their theoretical description. In the small radius limit, inclusive jet production exhibits a universal factorization, enabling the resummation of logarithms which greatly stabilizes theoretical predictions. In this paper, we show how to combine a recently introduced framework for small-R resummation with the Stripper subtraction formalism for fragmentation, enabling next-to-next-to-leading order calculations of small-R inclusive jet production for a wide variety of processes at the LHC. We extract the two-loop constants for the jet functions, enabling for the first time next-to-next-to-leading logarithmic resummation matched to next-to-next-to-leading order perturbative calculation. We compare with CMS data for small-R jet production, and find that our results greatly improve the accuracy of the predictions at small-R, and stabilize the perturbative convergence and error estimates at larger R. Our approach is applicable to a wide class of jet substructure observables exhibiting similar factorization theorems, opening the door to an NNLO jet substructure program at the LHC.

Effective Field Theories↗

A fragmentation approach to jet flavor

An intuitive definition of the partonic flavor of a jet in quantum chromodynamics is often only well-defined in the deep ultraviolet, where the strong force becomes a free theory and a jet consists of a single parton. However, measurements are performed in the infrared, where a jet consists of numerous particles and requires an algorithmic procedure to define their phase space boundaries. To connect these two regimes, we introduce a novel and simple partonic jet flavor definition in the infrared. We define the jet flavor to be the net flavor of the partons that lie exactly along the direction of the Winner-Take-All recombination scheme axis of the jet, which is safe to all orders under emissions of soft particles, but is not collinear safe. Collinear divergences can be absorbed into a perturbative fragmentation function that describes the evolution of the jet flavor from the ultraviolet to the infrared. The evolution equations are linear and a small modification to traditional DGLAP and we solve them to leading-logarithmic accuracy. The evolution equations exhibit fixed points in the deep infrared, we demonstrate quantitative agreement with parton shower simulations, and we present various infrared and collinear safe observables that are sensitive to this flavor definition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formation of Coanda jet from sharp-edged swirl nozzle with base plate

Experiments were conducted using tufts and PIV to determine the conditions for which a swirled gas jet issuing from a sharp-edge nozzle, in flush with a base plate, would form a Coanda jet. The flow field was also simulated. The inception of the Coanda jet was observed to be associated with the formation of a recirculation bubble at the nozzle exit. A threshold value of swirl number, which increased monotonically with Reynolds number, was required for the formation of the Coanda jet. The Coanda jet was associated with hysteresis. The flow features and transition from a diverging jet to a Coanda jet are discussed. (author)

42 ENGINEERING↗

Search for medium effects using jets from bottom quarks in PbPb collisions at $\sqrt{^SNN}$ = 5.02 TeV

The first study of the shapes of jets arising from bottom (b) quarks in heavy ion collisions is presented. Jet shapes are studied using charged hadron constituents as a function of their radial distance from the jet axis. Lead-lead (PbPb) collision data at a nucleon-nucleon center-of-mass energy of $\sqrt{s_{NN}}$ = 5.02 TeV were recorded by the CMS detector at the LHC, with an integrated luminosity of 1.69 nb-1. Compared to proton-proton collisions, a redistribution of the energy in b jets to larger distances from the jet axis is observed in PbPb collisions. This medium-induced redistribution is found to be substantially larger for b jets than for inclusive jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Atmospheric pressure He-air plasma jet: Breakdown process and propagation phenomenon

In this paper He-discharge (plasma jet/bullet) in atmospheric pressure air and its progression phenomenon has been studied experimentally using ICCD camera, optical emission spectroscopy (OES) and calibrated dielectric probe measurements. The repetitive nanosecond pulse has applied to a plasma pencil to generate discharge in the helium gas channel. The discharge propagation speed was measured from the ICCD images. The axial electric field distribution in the plasma jet is inferred from the optical emission spectroscopic data and from the probe measurement. The correlation between the jet velocities, jet length with the pulse duration is established. It shows that the plasma jet is not isolated from the input voltage along its propagation path. The discharge propagation speed, the electron density and the local and average electric field distribution along the plasma jet axis predicted from the experimental results are in good agreement with the data predicted by numerical simulation of the streamer propagation presented in different literatures. The ionization phenomenon of the discharge predicts the key ionization parameters, such as speed, peak electric field in the front, and electron density. The maximum local electric field measured by OES is 95 kV/cm at 1.3 cm of the jet axis, and average EF measured by probe is 24 kV/cm at the same place of the jet. The average and local electron density estimated are in the order of 10{sup 11} cm{sup -3} and it reaches to the maximum of 10{sup 12} cm{sup -3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TESTING THE JET QUENCHING PARADIGM WITH AN ULTRADEEP OBSERVATION OF A STEADILY SOFT STATE BLACK HOLE

We present ultradeep radio observations with the Expanded Very Large Array of 4U 1957+11, a Galactic black hole (BH) candidate X-ray binary known to exist in a persistent soft X-ray state. We derive a stringent upper limit of 11.4 {mu}Jy beam{sup -1} (3{sigma}) at 5-7 GHz, which provides the most rigorous upper limit to date on the presence of jets in a soft state BH X-ray binary (BHXB). X-ray, UV, and optical fluxes obtained within a few weeks of the radio data can be explained by thermal emission from the disk. At this X-ray luminosity, a hard state BHXB that follows the established empirical radio-X-ray correlation would be at least 330-810 times brighter at radio frequencies, depending on the distance to 4U 1957+11. This jet quenching of >2.5 orders of magnitude is greater than some models predict and implies that the jets are prevented from being launched altogether in the soft state. 4U 1957+11 is also more than one order of magnitude fainter than the faintest of the 'radio-quiet' population of hard state BHs. In addition, we show that, on average, soft state stellar-mass BHs probably have fainter jets than most active galactic nuclei in a state equivalent to the soft state. These results have implications for the conditions required for powerful, relativistic jets to form and provide a new empirical constraint for time- and accretion mode-dependent jet models, furthering our understanding of jet production and accretion onto BHs.

79 ASTRONOMY AND ASTROPHYSICS↗

Jet energy calibration at the LHC

In this study, jets are one of the most prominent physics signatures of high energy proton–proton (p–p) collisions at the Large Hadron Collider (LHC). They are key physics objects for precision measurements and searches for new phenomena. This review provides an overview of the reconstruction and calibration of jets at the LHC during its first Run. ATLAS and CMS developed different approaches for the reconstruction of jets, but use similar methods for the energy calibration. ATLAS reconstructs jets utilizing input signals from their calorimeters and use charged particle tracks to refine their energy measurement and suppress the effects of multiple p–p interactions ( pileup ). CMS, instead, combines calorimeter and tracking information to build jets from particle flow objects. Jets are calibrated using Monte Carlo (MC) simulations and a residual in situ calibration derived from collision data is applied to correct for the differences in jet response between data and Monte Carlo.

43 PARTICLE ACCELERATORS↗

Raman Temperature and Density Measurements in Supersonic Jets

Prediction of flow-field properties in supersonic jets using computational fluid dynamics (CFD) code predictions has become routine; however, obtaining accurate solutions becomes more challenging when there is a significant temperature difference between the jet core and the ambient air and/or compressibility effects are significant. Benchmark sets of flow field property data are required in order to assess current CFD capabilities and develop better modeling approaches for these turbulent flow fields where accurate calculation of temperatures and turbulent heat flux is important. Particle Image Velocimetry (PIV), spontaneous rotational Raman scattering (SRS) spectroscopy and Background Oriented Schlieren (BOS) have been previously used to acquire measurements of the mean and root mean square (rms) velocities, the mean and rms gas temperatures and density gradients in subsonic jet flows and film cooling flows. In this work, the ability to measure density is added to the list of measurands available using the acquired Raman spectra. The suite of measurement techniques are now applied to supersonic jet flows. The computation of the local gas pressure in the potential core of an over-expanded jet is demonstrated using the Raman measured gas temperature and density. Additionally, a unique density feature in temperature matched, perfectly expanded jet flow shear layers identified using BOS was verified using the Raman measurement technique. These non-intrusive flow measurements are compared against RANS predictions of the supersonic jet flow properties as a means of assessing their prediction accuracy.

Raman Spectroscopy↗

Techno-economic analysis of jet-fuel production from biorefinery waste lignin

Utilizing lignin feedstock along with cellulosic ethanol for the production of high-energy-density jet fuel offers a significant opportunity to enhance the overall operation efficiency, carbon conversion efficiency, economic viability, and sustainability of biofuel and chemical production. A patented catalytic process to produce lignin-substructure-based hydrocarbons in the jet-fuel range from lignin was developed. Comprehensive techno-economic analysis of this process was conducted through process simulation in this study. The discounted cash flow rate of return (DCFROR) method was used to evaluate a 2000 dry metric ton/day lignocellulosic ethanol biorefinery with the co-production of lignin jet fuel. The minimum selling price of lignin jet fuel at a 10% discount rate was estimated to be in the range of $6.35-$1.76/gal depending on the lignin and conversion rate and capacity. With a production capacity of 1.5-16.6 million gallon jet fuel per year, capital costs ranged from $38.0 to $39.4 million. On the whole, the co-production of jet fuel from lignin improved the overall economic viability of an integrated biorefinery process for corn ethanol production by raising co-product revenue from jet fuels.

09 BIOMASS FUELS↗

Measurement of double-parton scattering in inclusive production of four jets with low transverse momentum in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of inclusive four-jet production in proton-proton collisions at a center-of-mass energy of 13 TeV is presented. The transverse momenta of jets within |η| < 4.7 are required to exceed 35, 30, 25, and 20 GeV for the first-, second-, third-, and fourth-leading jet, respectively. Differential cross sections are measured as functions of the jet transverse momentum, jet pseudorapidity, and several other observables that describe the angular correlations between the jets. The measured distributions show sensitivity to different aspects of the underlying event, parton shower modeling, and matrix element calculations. In particular, the interplay between angular correlations caused by parton shower and double-parton scattering contributions is shown to be important. The double-parton scattering contribution is extracted by means of a template fit to the data, using distributions for single-parton scattering obtained from Monte Carlo event generators and a double-parton scattering distribution constructed from inclusive single-jet events in data. The effective double-parton scattering cross section is calculated and discussed in view of previous measurements and of its dependence on the models used to describe the single- parton scattering background.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The energy distribution of subjets and the jet shape

We present a framework that describes the energy distribution of subjets of radius r within a jet of radius R. We consider both an inclusive sample of subjets as well as subjets centered around a predetermined axis, from which the jet shape can be obtained. For r << R we factorize the physics at angular scales r and R to resum the logarithms of r/R. For central subjets, we consider both the standard jet axis and the winner-take-all axis, which involve double and single logarithms of r/R, respectively. All relevant one-loop matching coefficients are given, and an inconsistency in some previous results for cone jets is resolved. Our results for the standard jet shape differ from previous calculations at next-to-leading logarithmic order, because we account for the recoil of the standard jet axis due to soft radiation. Numerical results are presented for an inclusive subjet sample for pp → jet + X at next-to-leading order plus leading logarithmic order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The information content of jet quenching and machine learning assisted observable design

Jets produced in high-energy heavy-ion collisions are modified compared to those in proton-proton collisions due to their interaction with the deconfined, strongly-coupled quark-gluon plasma (QGP). In this work, we employ machine learning techniques to identify important features that distinguish jets produced in heavy-ion collisions from jets produced in proton-proton collisions. We formulate the problem using binary classification and focus on leveraging machine learning in ways that inform theoretical calculations of jet modification: (i) we quantify the information content in terms of Infrared Collinear (IRC)-safety and in terms of hard vs. soft emissions, (ii) we identify optimally discriminating observables that are in principle calculable in perturbative QCD, and (iii) we assess the information loss due to the heavy-ion underlying event and background subtraction algorithms. We illustrate our methodology using Monte Carlo event generators, where we find that important information about jet quenching is contained not only in hard splittings but also in soft emissions and IRC-unsafe physics inside the jet. This information appears to be significantly reduced by the presence of the underlying event. We discuss the implications of this for the prospect of using jet quenching to extract properties of the QGP. Since the training labels are exactly known, this methodology can be used directly on experimental data without reliance on modeling. We outline a proposal for how such an experimental analysis can be carried out, and how it can guide future measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗