Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Deuterium retention in tungsten exposed to low-energy pure and helium-seeded deuterium plasmas

Influence of helium (He) on the deuterium (D) retention in tungsten (W) under simultaneous He-D plasma exposure was investigated. Bulk polycrystalline tungsten and two W coatings on carbon substrate, namely, plasma-sprayed tungsten and combined magnetron-sputtered and ion implanted tungsten (CMSII-W) were exposed to pure and He-seeded D plasmas generated by electron-cyclotron-resonance plasma source. The D retention in each sample was subsequently analyzed by various methods such as nuclear reaction analysis for the D depth profiling up to 6 {mu}m and thermal desorption spectroscopy for the determination of total amount of D retention. It is shown that seeding of helium into D plasma with helium ion flux fraction of 10% reduces the deuterium retention for all tungsten grades but more significant reduction was observed for polycrystalline W and less significant effect was found for W coatings. From the thermal desorption spectroscopy measurements, we conclude that the presence of He modifies the density of existing traps for D but does not modify the nature of traps. Maximum effect of a reduction in the deuterium retention due to helium seeding was observed at around 500 K for bulk polycrystalline W. Mechanisms of deuterium retention and He effect in different W materials are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional particle-in-cell simulations of transport in a magnetized electronegative plasma

Particle transport in a uniformly magnetized electronegative plasma is studied in two-dimensional (2D) geometry with insulating (dielectric) boundaries. A 2D particle-in-cell (PIC) code is employed, with the results compared to analytic one-dimensional models that approximate the end losses as volume losses. A modified oxygen reaction set is used to scale to the low densities used in PIC codes and also to approximately model other gases. The principal study is the limiting of the transverse electron flow due to strong electron magnetization. The plasma in the PIC calculation is maintained by axial currents that vary across the transverse dimension. For a cosine current profile nearly uniform electron temperature is obtained, which at the B-fields studied (600-1200 G) give a small but significant fraction (0.25 or less) of electron to negative ion transverse loss. For a more transverse-confined current, and approximating the higher mass and attachment reaction rate of iodine, the fraction of electron to negative ion transverse loss can be made very small. The models which have been constructed reasonably approximate the PIC results and indicate that the cross-field transport is nearly classical.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Investigation of Axial and Beam-Riding Propulsive Physics with TEA CO{sub 2} laser

A twin Lumonics K922M pulsed TEA CO{sub 2} laser system (pulse duration of approximately 100 ns FWHM spike, with optional 1 {mu}s tail, depending upon laser gas mix) was employed to experimentally measure both axial thrust and beam-riding behavior of Type no. 200 lightcraft engines, using a ballistic pendulum and Angular Impulse Measurement Device (AIMD, respectively. Beam-riding forces and moments were examined along with engine thrust-vectoring behavior, as a function of: a) laser beam lateral offset from the vehicle axis of symmetry; b) laser pulse energy ({approx}12 to 40 joules); c) pulse duration (100 ns, and 1 {mu}s); and d) engine size (97.7 mm to 161.2 mm). Maximum lateral momentum coupling coefficients (C{sub M}) of 75 N-s/MJ were achieved with the K922M laser whereas previous PLVTS laser (420 J, 18 {mu}s duration) results reached only 15 N-s/MJ--an improvement of 5x. Maximum axial C{sub M} performance with the K922M reached 225 N-s/MJ, or about {approx}3x larger than the lateral C{sub M} values. These axial C{sub M} results are sharply higher than the 120 N/MW previously reported for long pulse (e.g., 10-18 {mu}s)CO{sub 2} electric discharge lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Momentum Transfer by Laser Ablation of Irregularly Shaped Space Debris

Proposals for ground-based laser remediation of space debris rely on the creation of appropriately directed ablation-driven impulses to either divert the fragment or drive it into an orbit with a perigee allowing atmospheric capture. For a spherical fragment, the ablation impulse is a function of the orbital parameters and the laser engagement angle. If, however, the target is irregularly shaped and arbitrarily oriented, new impulse effects come into play. Here we present an analysis of some of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A numerical method for determining highly precise electron energy distribution functions from Langmuir probe characteristics

Electron energy distribution functions (EEDFs) were determined from probe characteristics using a numerical ac superimposed method with a distortion correction of high derivative terms by varying amplitude of a sinusoidal perturbation voltage superimposed onto the dc sweep voltage, depending on the related electron energy. Low amplitude perturbation applied around the plasma potential represented the low energy peak of the EEDF exactly, and high amplitude perturbation applied around the floating potential was effective to suppress noise or distortion of the probe characteristic, which is fatal to the tail electron distribution. When a small random noise was imposed over the stabilized prove characteristic, the numerical differentiation method was not suitable to determine the EEDF, while the numerical ac superimposed method was able to obtain a highly precise EEDF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the velocity variation in atmospheric pressure plasma plumes driven by positive and negative pulses

To better understand the variation in the ''plasma bullet'' velocity, the dynamics of an atmospheric pressure plasma plume driven by positive and negative pulses are investigated in detail. It is found that, before the plasma exits the nozzle, the plasma propagates at a speed of about 30 km/s for both positive and negative pulses. As soon as the plasma exits the nozzle, the plasma propagation speed increases dramatically for both cases. The peak velocity for the case of the positive pulse is much higher than that of the negative pulse, it is approximately 150 km/s and 70 km/s, respectively. According to the optical emission spectra, the acceleration behavior of the plasma bullet when it exits the nozzle is due to the increase in the N{sub 2}{sup +} concentration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional simulation of efficiency enhancement in free-electron laser with prebunched electron beam

The effect of prebunching of the electron beam and tapering of the wiggler amplitude on the harmonic upconversion in free-electron laser amplifier is studied in three dimensions. A set of coupled nonlinear first-order differential equations that describe the three-dimensional simulation of the system is solved numerically. This set of equation describes self-consistently the longitudinal spatial dependence of radiation waists, curvatures, and amplitudes together with the evaluation of the electron beam. The analysis is related to extreme ultraviolet and x-ray emission. In addition to uniform beam, prebunched electron beam has also been studied. The effect of sinusoidal distribution of entry times for the electron beam on the evolution of radiation is compared with uniform distribution. It is shown that prebunching reduces the saturation length substantially. For efficiency enhancement, the wiggler is set to decrease linearly when the radiation of the third harmonic saturates. The optimum starting point and the slope of tapering of the amplitude of the wiggler are found by a successive run of the code. It was found that tapering can increase the saturated power of the third harmonic considerably.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionic wind generation by a wire-cylinder-plate corona discharge in air at atmospheric pressure

A wire-cylinder-plate electrode configuration is presented to generate ionic wind with a dc corona discharge in air at atmospheric pressure. The objective of the work is to maximize the power supplied to the flow in order to increase acceleration while avoiding breakdown. Thus, the proposed experimental setup addresses the problem of decoupling the mechanism of ion generation from that of ion acceleration. Using a wire-plate configuration as a reference, we have focused on improving the topography of the electric field to (1) separate the ionization and acceleration zones in space, and (2) guide the trajectory of charged particles as parallel to the median axis as possible. In the proposed wire-cylinder-plate setup, a dc corona discharge is generated in the space between a wire and two cylinders. The ions produced by the corona then drift past the cylinders and into a channel between two plates, where they undergo acceleration. To maximize the ionic wind it is found that the geometric configuration must be as compact as possible and that the voltage applied must be right below breakdown. Experimentally, the optimized wire-plate reference setup provides a maximum flow velocity of 8 m s{sup -1}, a flow rate per unit electrode length of 0.034 m{sup 2} s{sup -1}, and a thrust per unit electrode length of 0.24 N m{sup -1}. The wire-cylinder-plate configuration provides a maximum flow velocity of 10 m s{sup -1}, a flow rate per unit electrode length of 0.041 m{sup 2} s{sup -1}, and a thrust per unit electrode length of 0.35 N m{sup -1}. This 46% increase in thrust is obtained by increasing the electric power per unit electrode length by only 16% (from 175 to 210 W m{sup -1}), which confirms the gain in efficiency obtained with the decoupled system. In comparison with a simple wire-wire corona configuration, the wire-cylinder-plate configuration increases the ionic wind velocity by up to a factor of 3, and the thrust by an order of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation of broadband terahertz pulses through a dense-magnetized-collisional-bounded plasma layer

The terahertz characteristics of a dense-magnetized-collisional-bounded plasma under normal incident are analyzed in this study, which is of practical significance in plasma diagnostics with electromagnetic waves. We theoretically calculate the reflection, absorption, and transmission coefficients for right- and left-handed polarized terahertz waves through a uniform, magnetized, and collisional plasma slab bounded by lossless transparent walls. The power absorption spectra in the frequency range of 0.1-2 THz are given with strong external magnetic fields and different plasma parameters such as plasma density and collisional frequency. Our numerical result is consistent with Jamison's experimental result. It is found that plasma absorption is mainly caused by the collisional absorption and electron cyclotron resonance. Furthermore, the absorption heavily depends on the polarization mode of the terahertz waves when the external magnetic field B is high enough that the election gyrofrequency is near the incident wave frequency. The relationships between the corresponding parameters of the problem are studied numerically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mixed time slicing in path integral simulations

A simple and efficient scheme is presented for using different time slices for different degrees of freedom in path integral calculations. This method bridges the gap between full quantization and the standard mixed quantum-classical (MQC) scheme and, therefore, still provides quantum mechanical effects in the less-quantized variables. Underlying the algorithm is the notion that time slices (beads) may be 'collapsed' in a manner that preserves quantization in the less quantum mechanical degrees of freedom. The method is shown to be analogous to multiple-time step integration techniques in classical molecular dynamics. The algorithm and its associated error are demonstrated on model systems containing coupled high- and low-frequency modes; results indicate that convergence of quantum mechanical observables can be achieved with disparate bead numbers in the different modes. Cost estimates indicate that this procedure, much like the MQC method, is most efficient for only a relatively few quantum mechanical degrees of freedom, such as proton transfer. In this regime, however, the cost of a fully quantum mechanical simulation is determined by the quantization of the least quantum mechanical degrees of freedom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear oscillation behavior of a driven gyrotron backward-wave oscillator

Controlling the phase and frequency of a gyrotron backward-wave oscillator (gyro-BWO) by means of injection-locking techniques is of practical importance. This study employed a nonlinear self-consistent time-independent code to analyze the nonlinear oscillation behavior of a driven gyro-BWO. There are three regimes in the driven gyro-BWO, including amplification, injection-locked oscillation, and mode competition regimes. Based on the theory of nonlinear oscillation, the amplification and injection-locked oscillation modes are the stable modes and compete with each other in the mode competition regime. An oscillator plane of the driven gyro-BWO is elucidated in the paper. This work demonstrates for the first time that the amplification mode transits to the injection-locked oscillation mode in the driven gyro-BWO. Moreover, the signification efficiency enhancement of the driven gyro-BWO over the free-running efficiency is found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical investigation of the spectrum and conversion efficiency of short wavelength extreme-ultraviolet light sources based on terbium plasmas

The emission spectrum and conversion efficiency of laser-produced terbium plasmas are theoretically investigated on the basis of computational atomic data. The theoretically calculated spectrum reproduces the main peak of observed spectrum at {lambda}=6.5 nm, which originates from 4d-4f transitions of near palladiumlike ions (Tb{sup 19+}). A simple model of the isothermal expansion of terbium plasma suggests that efficient emission can be achieved by pumping the plasma with a laser pulse at an intensity of approximately one order of magnitude greater than that used with tin sources at {lambda}=13.5 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetics of illuminated complex plasmas considering Mie scattering by spherical dust particles with a size distribution

In this paper Mie scattering of light by dust particles having Mathis, Rumpl, and Nordsieek power law distribution of size has been incorporated in the formulation of the kinetics of an illuminated complex plasma which takes into account the ionization of neutral atoms by an external agency, ion-electron recombination, photoemission of electrons by the dust particles, and accretion of electrons and ions on the surface of the particles; the number and energy balance of the constituent species has also been taken into account. An interesting conclusion is that unlike the usual case (when Mie scattering is neglected) the charge on a particle is not proportional to the radius and that for certain sets of parameters the smaller particles are negatively charged while the larger particles, carry positive charge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parametric Decay of Pump Waves into two Linear Modes in SINP MaPLE Device

Parametric decay of incident waves of ion cyclotron frequency range into linear modes is observed in experiment performed in the SINP MaPLE device where nitrogen plasma produced by ECR discharge. Along with a mode in drift wave frequency range, sideband of the incident waves are observed when amplitude of the exciter signal goes above a threshold value. Sideband of the second harmonic is also seen. Preliminary studies point towards excitation of ion Bernstein wave. Details of the experimental results are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advances and Current Challenges in the Theory of Zonal-Flow Generation

Some remarks are made about the use of modern statistical formalism in the calculation of the zonal-flow growth rate and the backreaction of zonal flows on drift waves. The intimate connection between the zonal growth-rate calculation and the derivation of a statistical formula for eddy viscosity in two-dimensional neutral fluids is emphasized, as is the the role of Casimir invariants in disparate-scale expansion. Also stressed is the importance of random Galilean invariance in the calculation of the triad interaction time between short-wavelength drift waves and long-wavelength flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synergy of Edge Shear Layer and Micro Turbulence in the Dynamics of the Density Limit of H-mode Discharges

Theoretical model for the physical mechanism of Greenwald density limit is presented. The importance of the role of shear layer associated with Zonal Flows (ZFs) and edge turbulence driven by high-m drift resistive ballooning mode (high-m DRBM) for Greenwald scaling is established. We have studied the multiscale interaction of zonal flows (ZFs) in the background of high-m DRBM turbulence. When the collision damping weak and model predicts unrealistically low value of saturated primary turbulence, we have studied the tertiary instability of ZFs, which take the place of collisional damping of ZFs. A self-consistent, simplified low-dimensional model of these interactions is constructed and derived the density scaling closed to Greenwald limit, which is based on experimental observations i.e., n{sub G{alpha}} I {sub P} /a{sup 2}(where n{sub G}, the plasma density and I{sub P}, the current).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Systematic investigation of self-absorption and conversion efficiency of 6.7 nm extreme ultraviolet sources

We have investigated the dependence of the spectral behavior and conversion efficiencies of rare-earth plasma extreme ultraviolet sources with peak emission at 6.7 nm on laser wavelength and the initial target density. The maximum conversion efficiency was 1.3% at a laser intensity of 1.6x10{sup 12} W/cm{sup 2} at an operating wavelength of 1064 nm, when self-absorption was reduced by use of a low initial density target. Moreover, the lower-density results in a narrower spectrum and therefore improved spectral purity. It is shown to be important to use a low initial density target and/or to produce low electron density plasmas for efficient extreme ultraviolet sources when using high-Z targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma dispersion function for a Fermi-Dirac distribution

A plasma dispersion function (PDF) is defined for a nonrelativistic Fermi-Dirac distribution and its properties are explored. The degree of degeneracy is described by a parameter {xi}=e{sup {mu}}{sub e}{sup /T}{sub e}, for electrons, with {mu}{sub e}/T{sub e} large and negative in the nondegenerate limit, and large and positive in the completely degenerate limit. The PDF is denoted Z(y,{xi}), where the variable y={omega}/{radical}(2)kV{sub e}, is the argument of the conventional PDF, Z(y)=Z(y,0), for a Maxwellian distribution. In the completely degenerate limit, Z(y,{xi}) approaches a logarithmic function that depends on the Fermi temperature and is independent of T{sub e}. Analytic approximations to Z(y,{xi}) are derived in terms of polylogarithmic functions for y{sup 2}>>1 and for y{sup 2}<<1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗