Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “future of computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Constraints on methane emissions in North America from future geostationary remote-sensing measurements

The success of future geostationary (GEO) satellite observation missions depends on our ability to design instruments that address their key scientific objectives. Here, an Observation System Simulation Experiment (OSSE) is performed to quantify the constraints on methane (CH 4 ) emissions in North America obtained from shortwave infrared (SWIR), thermal infrared (TIR), and multi-spectral (SWIR+TIR) measurements in geostationary orbit and from future SWIR low-Earth orbit (LEO) measurements. Furthermore, we used an efficient stochastic algorithm to compute the information content of the inverted emissions at high spatial resolution (0.5° × 0.7°) in a variational framework using the GEOS-Chem chemistry-transport model and its adjoint. Our results show that at sub-weekly timescales, SWIR measurements in GEO orbit can constrain about twice as many independent flux patterns than in LEO orbit, with a degree of freedom for signal (DOF) for the inversion of 266 and 115, respectively. Comparisons between TIR GEO and SWIR LEO configurations reveal that poor boundary layer sensitivities for the TIR measurements cannot be compensated for by the high spatiotemporal sampling of a GEO orbit. The benefit of a multi-spectral instrument compared to current SWIR products in a GEO context is shown for sub-weekly timescale constraints, with an increase in the DOF of about 50 % for a 3-day inversion. Our results further suggest that both the SWIR and multi-spectral measurements on GEO orbits could almost fully resolve CH 4 fluxes at a spatial resolution of at least 100 km × 100 km over source hotspots (emissions > 4 × 10 5 kg day -1 ). The sensitivity of the optimized emission scaling factors to typical errors in boundary and initial conditions can reach 30 and 50 % for the SWIR GEO or SWIR LEO configurations, respectively, while it is smaller than 5 % in the case of a multi-spectral GEO system. Our results demonstrate that multi-spectral measurements from a geostationary satellite platform would address the need for higher spatiotemporal constraints on CH 4 emissions while greatly mitigating the impact of inherent uncertainties in source inversion methods on the inferred fluxes.

54 ENVIRONMENTAL SCIENCES↗

US ATLAS and US CMS HPC and Cloud Blueprint

The Large Hadron Collider (LHC) at CERN houses two general purpose detectors - ATLAS and CMS - which conduct physics programs over multi-year runs to generate increasingly precise and extensive datasets. The efforts of the CMS and ATLAS collaborations lead to the discovery of the Higgs boson, a fundamental particle that gives mass to other particles, representing a monumental achievement in the field of particle physics that was recognized with the awarding of the Nobel Prize in Physics in 2013 to François Englert and Peter Higgs. These collaborations continue to analyze data from the LHC and are preparing for the high luminosity data taking phase at the end of the decade. The computing models of these detectors rely on a distributed processing grid hosted by more than 150 associated universities and laboratories worldwide. However, such new data will require a significant expansion of the existing computing infrastructure. To address this, both collaborations have been working for years on integrating High Performance Computers (HPC) and commercial cloud resources into their infrastructure and continue to assess the potential role of such resources in order to cope with the demands of the new high luminosity era. US ATLAS and US CMS computing management have charged the authors to provide a blueprint document looking at current and possibly future use of HPC and Cloud resources, outlining integration models, possibilities, challenges and costs. The document will address key questions such as the optimal use of resources for the experiments and funding agencies, the main obstacles that need to be overcome for resource adoption, and areas that require more attention.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extending the subspace hybrid method for eigenvalue problems in reactor physics calculation

This paper presents an innovative hybrid Monte-Carlo-Deterministic method denoted by the SUBSPACE method designed for improving the efficiency of hybrid methods for reactor analysis applications. The SUBSPACE method achieves its high computational efficiency by taking advantage of the existing correlations between desired responses. Recently, significant gains in computational efficiency have been demonstrated using this method for source driven problems. Within this work the mathematical theory behind the SUBSPACE method is introduced and extended to address core wide level k-eigenvalue problems. The method's efficiency is demonstrated based on a three-dimensional quarter-core problem, where responses are sought on the pin cell level. The SUBSPACE method is compared to the FW-CADIS method and is found to be more efficient for the utilized test problem because of the reason that the FW-CADIS method solves a forward eigenvalue problem and an adjoint fixed-source problem while the SUBSPACE method only solves an adjoint fixed-source problem. Based on the favorable results obtained here, we are confident that the applicability of Monte Carlo for large scale reactor analysis could be realized in the near future. (authors)

97 MATHEMATICS AND COMPUTING↗

Detection limits for actinides in a monochromatic, wavelength-dispersive x-ray fluorescence instrument

Recent developments in x-ray optics have made it possible to examine the L x-rays of actinides using doubly-curved crystals in a bench-top device. A doubly-curved crystal (DCC) acts as a focusing monochromatic filter for polychromatic x-rays. A Monochromatic, Wavelength-Dispersive X-Ray Fluorescence (MWDXRF) instrument that uses DCCs to measure Cm and Pu in reprocessing plant liquors was proposed in 2007 by the authors at Los Alamos National Laboratory. A prototype design of this MWDXRF instrument was developed in collaboration with X-ray Optical Systems Inc. (XOS), of East Greenbush, New York. In the MWDXRF instrument, x-rays from a Rhodium-anode x-ray tube are passed through a primary DCC to produce a monochromatic beam of 20.2-keV photons. This beam is focused on a specimen that may contain actinides. The 20.2-keV interrogating beam is just above the L3 edge of Californium; each actinide (with Z = 90 to 98) present in the specimen emits characteristic L x-rays as the result of L3-shell vacancies. In the LANL-XOS prototype MWDXRf, these x-rays enter a secondary DCC optic that preferentially passes 14.961-keV photons, corresponding to the L-alpha-1 x-ray peak of Curium. In the present stage of experimentation, Curium-bearing specimens have not been analyzed with the prototype MWDXRF instrument. Surrogate materials for Curium include Rubidium, which has a K-beta-l x-ray at 14.961 keV, and Yttrium, which has a K-alpha-1 x-ray at 14.958 keV. In this paper, the lower limit of detection for Curium in the LANL-XOS prototype MWDXRF instrument is estimated. The basis for this estimate is described, including a description of computational models and benchmarking techniques used. Detection limits for other actinides are considered, as well as future safeguards applications for MWDXRF instrumentation.

36 MATERIALS SCIENCE↗

Inverse Design of Plasma Metamaterial Devices for Optical Computing

We apply inverse-design methods to produce two-dimensional plasma metamaterial (PMM) devices. Backpropagated finite-difference frequency-domain (FDFD) simulations are used to design waveguides and demultiplexers operating under both TE and TM modes. Demultiplexing and waveguiding are demonstrated for devices composed of plasma elements with reasonable plasma densities of approximately 7 GHz, allowing for future in situ training and experimental realization of these designs. We also explore the possible applicability of PMMs to nonlinear boolean operations for use in optical computing. Functionally complete logical connectives (or and and) are achieved in the TM mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phases of polymer systems in solution studied via molecular dynamics

Polymers are amazingly versatile molecules with a tremendous range of applications. Our lives would be very different without them. There would be no multitudes of plastic encased electronic gizmos, no latex paint on the walls and no rubber tires, just to name a few of the many commonplace polymer materials. In fact, life as we know it wouldn’t exist without polymers as two of the most essential types of molecules central to cellular life, Proteins and DNA, are both polymers! [1] With their wide range of application to a variety of uses, polymers are still a very active field in basic research. Of particular current interest is the idea of combining polymers with inorganic particles to form novel composite materials. [2] As computers are becoming faster, they are becoming all the more powerful tools for modeling and simulating real systems. With recent advances in computing on graphics processing units (GPUs) [3–7], questions can now be answered via simulation that could not even be asked before. This thesis focuses on the use of computer simulations to model novel polymerinorganic composite systems in order to predict what possible phases can form and under what conditions. The goal is to provide some direction for future experiments and to gain a deeper understanding of the fundamental physics involved. Along the way, there are some interesting and essential side-tracks in the areas of equilibrating complicated phases and accelerating the available computer power with GPU computing, both of which are necessary steps to enable the study of polymer nanocomposites.

36 MATERIALS SCIENCE↗

Fast, Dynamic, and Scalable Algorithms for Large-Scale Constrained Optimization

Scientists and engineers constantly aim to optimize an objective subject to physical, environmental, and/or resource constraints. The technique of using mathematical models to formulate and find real solutions of such problems is known as mathematical optimization, a process that has become invaluable for design and discovery in numerous scientific fields. This project has focused on the design, analysis, and implementation of high-performance computing algorithms for solving cutting-edge optimization problems. These include problems that involve (1) data uncertainties, such as those in the future supply, demand, and capacity of a given power system, (2) extreme numbers of alternatives, such as in the design of electrical power grids to avoid network vulnerabilities, and (3) real-time decisions, such as in the control of chemical reactors. The key features of the new algorithms are that they are fast, dynamic, and scalable to meet the computational requirements of scientists and researchers working to optimize large-scale, complex systems. The algorithms that have been designed, analyzed, and tested as part of the project can be characterized based on the types of optimization problems they have been designed to solve. Much of the work has focused on algorithms for solving large-scale constrained optimization problems. Contributions have also been made in the design of algorithms for unconstrained optimization, with some specialized methods for solving problems that have inherent nonsmoothness. Contributions have also been made in areas that have grown to prominence in the field over the five-year award period. These include the design of algorithms for solving large-scale stochastic optimization problems, such as those that arise in large-scale machine learning, and in complexity analyses for solving nonconvex problems, which has been a focal point of much recent work in continuous optimization. Overall, the project has supported work that has led to almost 30 articles that have been published or accepted to top journals in the field of mathematical optimization.

97 MATHEMATICS AND COMPUTING↗

International Conference on Microbiome Engineering (ICME 2018)

ICME 2018 explores the importance and applications of microbiome engineering. The conference will focus on engineering of individual organisms in the microbiome as well as the community of organisms enabled by new gene editing tools and computational techniques. This conference brings in experts in industry and academia worldwide to discuss the challenges seen in microbiome engineering and the future of the field. The ICME 2018 conference took place on November 4-6, 2018 at the Joseph B. Martin Conference Center in Boston, MA. The conference consisted of 4 technical sessions: (1) Engineering of the organism and tools to manipulate it; (2) Engineering and modeling of microbial communities; (3) From genome-scale to community-scale models; (4) Computational models for design. There was also a panel discussion regarding the role of engineers in the microbiome field. The keynote and invited speakers were a mix of professionals from both industry and academia.

42 ENGINEERING↗

Final Progress Report The U.S. Department of Energy Research Grant No. DE-SC0008660 Plasma Surface Interactions: Bridging from the Surface to the Micron Frontier through Leadership Class Computing

The choice of material for the plasma facing components (PFC), in particular, for divertor targets, is one of the main issues for future tokamak reactors. There are two major requirements for the PFC’s material: acceptable level of tritium retention and durability in a harsh environment of fusion grade plasma. Based on these criteria, some years ago it was decided that tungsten is an acceptable material for divertor targets in ITER. However, further experimental studies reveal that the irradiation of tungsten even with low energetic (well below sputtering threshold!) He containing plasma causes significant modification of surface morphology, formation of the layer of He nano-bubbles (in the temperature range T<1000 K), “fuzz” (for 1000 K 2000 K) (e.g. see Fig. 1). Recall that He, being an ash of D-T fusion reactions, is an inherent impurity in fusion plasma. The goals of the UCSD Applied Plasma Theory Group was: i) investigate the mechanisms of the formation of He nano-bubble layer and fuzz growth under He irradiation, as well as the physics of transport of hydrogen species in tungsten lattice, and ii) develop physics understanding of the models suitable for the incorporation into the Xolotl-PSI code based on the reaction-diffusion approach, which is the flagship of the whole SciDAC project [8], which can guide both numerical simulations and experimental studies. Here we just highlight our major accomplishments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large-scale compute-intensive analysis via a combined in-situ and co-scheduling workflow approach, In: SC '15 Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis

Large-scale simulations can produce hundreds of terabytes to petabytes of data, complicating and limiting the efficiency of workflows. Traditionally, outputs are stored on the file system and analyzed in post-processing. With the rapidly increasing size and complexity of simulations, this approach faces an uncertain future. Trending techniques consist of performing the analysis in-situ, utilizing the same resources as the simulation, and/or off-loading subsets of the data to a compute-intensive analysis system. We introduce an analysis framework developed for HACC, a cosmological N-body code, that uses both in-situ and co-scheduling approaches for handling petabyte-scale outputs. We compare different analysis set-ups ranging from purely off-line, to purely in-situ to in-situ/co-scheduling. The analysis routines are implemented using the PISTON/VTK-m framework, allowing a single implementation of an algorithm that simultaneously targets a variety of GPU, multi-core, and many-core architectures.

Computer Science↗

A Big Data Approach to Analyzing Market Volatility

Understanding the microstructure of the financial market requires the processing of a vast amount of data related to individual trades, and sometimes even multiple levels of quotes. Analyzing such a large volume of data requires tremendous computing power that is not easily available to financial academics and regulators. Fortunately, public funded High Performance Computing (HPC) power is widely available at the National Laboratories in the US. In this paper we demonstrate that the HPC resource and the techniques for data-intensive sciences can be used to greatly accelerate the computation of an early warning indicator called Volume-synchronized Probability of Informed trading (VPIN). The test data used in this study contains five and a half year's worth of trading data for about 100 most liquid futures contracts, includes about 3 billion trades, and takes 140GB as text files. By using (1) a more efficient file format for storing the trading records, (2) more effective data structures and algorithms, and (3) parallelizing the computations, we are able to explore 16,000 different ways of computing VPIN in less than 20 hours on a 32-core IBM DataPlex machine. Our test demonstrates that a modest computer is sufficient to monitor a vast number of trading activities in real-time – an ability that could be valuable to regulators. Our test results also confirm that VPIN is a strong predictor of liquidity-induced volatility. With appropriate parameter choices, the false positive rates are about 7% averaged over all the futures contracts in the test data set. More specifically, when VPIN values rise above a threshold (CDF > 0.99), the volatility in the subsequent time windows is higher than the average in 93% of the cases.

97 MATHEMATICS AND COMPUTING↗

Evaluation of data driven low-rank matrix factorization for accelerated solutions of the Vlasov equation

Low-rank methods have shown success in accelerating simulations of a collisionless plasma described by the Vlasov equation, but still rely on computationally costly linear algebra every time step. We propose a data-driven factorization method using artificial neural networks, specifically with convolutional layer architecture, that trains on existing simulation data. At inference time, the model outputs a low-rank decomposition of the distribution field of the charged particles, and we demonstrate that this step is faster than the standard linear algebra technique. Numerical experiments show that the method achieves comparable reconstruction accuracy for interpolation tasks, generalizing to unseen test data in a manner beyond just memorizing training data; patterns in factorization also inherently followed the same numerical trend as those within algebraic methods (e.g., truncated singular-value decomposition). However, when training on the first 70% of a time-series data and testing on the remaining 30%, the method fails to meaningfully extrapolate. Despite this limiting result, the technique may have benefits for simulations in a statistical steady-state or otherwise showing temporal stability. These results suggest that while the model offers a computationally efficient alternative for datasets with temporal stability, its current formulation is best suited for interpolation rather than for predicting future states in time-evolving systems. This study thus lays the groundwork for further refinement of neural network-based approaches to low-rank matrix factorization in high-dimensional plasma simulations.

97 MATHEMATICS AND COMPUTING↗

Jörg Langowski: his scientific legacy and the future it promises

Background: With the passing of Jörg Langowski 6 May 2017 in a sailplane accident, the scientific community was deprived of a strident and effective voice for DNA and chromatin molecular and computational biophysics, for open access publishing and for the creation of effective scientific research networks. Methods: In this work, after reviewing some of Jörg’s key research contributions and ideas, we offer through the personal remembrance of his closest collaborators, a deep analysis of the major results of his research and the future directions they have engendered. Conclusions: The legacy of Jörg Langowski has been to propel a way of viewing biological function that considers living systems as dynamic and in three dimensions. This physical view of biology that he pioneered is now, finally, becoming established also because of his great effort.

59 BASIC BIOLOGICAL SCIENCES↗

Production Experiences with the Cray-Enabled TORQUE Resource Manager

High performance computing resources utilize batch systems to manage the user workload. Cray systems are uniquely different from typical clusters due to Cray s Application Level Placement Scheduler (ALPS). ALPS manages binary transfer, job launch and monitoring, and error handling. Batch systems require special support to integrate with ALPS using an XML protocol called BASIL. Previous versions of Adaptive Computing s TORQUE and Moab batch suite integrated with ALPS from within Moab, using PERL scripts to interface with BASIL. This would occasionally lead to problems when all the components would become unsynchronized. Version 4.1 of the TORQUE Resource Manager introduced new features that allow it to directly integrate with ALPS using BASIL. This paper describes production experiences at Oak Ridge National Laboratory using the new TORQUE software versions, as well as ongoing and future work to improve TORQUE.

Adaptive Comput- ing↗

Neural Architecture Search Benchmarks: Insights and Survey

Neural Architecture Search (NAS), a promising and fast-moving research field, aims to automate the architectural design of Deep Neural Networks (DNNs) to achieve better performance on the given task and dataset. NAS methods have been very successful in discovering efficient models for various Computer Vision, Natural Language Processing, etc. The major obstacles to the advancement of NAS techniques are the demand for large computation resources and fair evaluation of various search methods. The differences in training pipeline and setting make it challenging to compare the efficiency of two NAS algorithms. A large number of NAS Benchmarks to simulate the architecture evaluation in seconds have been released over the last few years to ease the computation burden of training neural networks and can aid in the unbiased assessment of different search methods. This paper provides an extensive review of several publicly available NAS Benchmarks in the literature. We provide technical details and a deeper understanding of each benchmark and point out future directions.

97 MATHEMATICS AND COMPUTING↗

MyCrunchGPT: A LLM Assisted Framework for Scientific Machine Learning

Scientific machine learning (SciML) has advanced recently across many different areas in computational science and engineering. Here, the objective is to integrate data and physics seamlessly without the need of employing elaborate and computationally taxing data assimilation schemes. However, preprocessing, problem formulation, code generation, postprocessing, and analysis are still time- consuming and may prevent SciML from wide applicability in industrial applications and in digital twin frameworks. Here, we integrate the various stages of SciML under the umbrella of ChatGPT, to formulate MyCrunchGPT, which plays the role of a conductor orchestrating the entire workflow of SciML based on simple prompts by the user. Specifically, we present two examples that demonstrate the potential use of MyCrunchGPT in optimizing airfoils in aerodynamics, and in obtaining flow fields in various geometries in interactive mode, with emphasis on the validation stage. To demonstrate the flow of the MyCrunchGPT, and create an infrastructure that can facilitate a broader vision, we built a web app based guided user interface, that includes options for a comprehensive summary report. The overall objective is to extend MyCrunchGPT to handle diverse problems in computational mechanics, design, optimization and controls, and general scientific computing tasks involved in SciML, hence using it as a research assistant tool but also as an educational tool. While here the examples focus on fluid mechanics, future versions will target solid mechanics and materials science, geophysics, systems biology, and bioinformatics.

97 MATHEMATICS AND COMPUTING↗

A least-squares finite element method based on the Helmholtz decomposition for hyperbolic balance laws

In this paper, a least-squares finite element method for scalar nonlinear hyperbolic balance laws is proposed and studied. The approach is based on a formulation that utilizes an appropriate Helmholtz decomposition of the flux vector and is related to the standard notion of a weak solution. This relationship, together with a corresponding connection to negative-norm least-squares, is described in detail. As a consequence, an important numerical conservation theorem is obtained, similar to the famous Lax–Wendroff theorem. The numerical conservation properties of the method in this paper do not fall precisely in the framework introduced by Lax and Wendroff, but they are similar in spirit as they guarantee that when L 2 convergence holds, the resulting approximations approach a weak solution to the hyperbolic problem. The least-squares functional is continuous and coercive in an H -1 -type norm, but not L 2 -coercive. Nevertheless, the L 2 convergence properties of the method are discussed. Convergence can be obtained either by an explicit regularization of the functional, that provides control of the L 2 norm, or by properly choosing the finite element spaces, providing implicit control of the L 2 norm. Numerical results for the inviscid Burgers equation with discontinuous source terms are shown, demonstrating the L 2 convergence of the obtained approximations to the physically admissible solution. The numerical method utilizes a least-squares functional, minimized on finite element spaces, and a Gauss–Newton technique with nested iteration. Finally, we believe that the linear systems encountered with this formulation are amenable to multigrid techniques and combining the method with adaptive mesh refinement would make this approach an efficient tool for solving balance laws (this is the focus of a future study).

97 MATHEMATICS AND COMPUTING↗