Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Expandable pallet for space station interface attachments

Described is a foldable expandable pallet for Space Station interface attachments with a basic square configuration. Each pallet consists of a series of struts joined together by node point fittings to make a rigid structure. The struts have hinge fittings which are spring loaded to permit collapse of the module for stowage transport to a Space Station in the payload bay of the Space Shuttle, and development on orbit. Dimensions of the pallet are selected to provide convenient, closely spaced attachment points between the node points of the relatively widely spaced trusses of a Space Station platform. A pallet is attached to a strut at four points: one close fitting hole, two oversize holes, and a slot to allow for thermal expansion/contraction and for manufacturing tolerances. Applications of the pallet include its use in rotary or angular joints; servicing of splints; with gridded plates; as instrument mounting bases; and as a roadbed for a Mobile Service Center (MSC).

Wesselski, Clarence J.↗
NASA NTRS1988

Collet lock joint for space station truss

A lock joint for a Space Station has a series of struts joined together in a predetermined configuration by node point fittings. The fittings have removeable inserts. The lock joint has an elongated housing connected at one end to a strut. A split-fingered collet is mounted within the housing to insure reciprocal movement. A handle on the housing is connected to the collet for moving the collet into the insert where the fingers of the collet expand to lock the joint to the fitting.

Wesselski, Clarence J.↗
NASA NTRS1988

A prediction for the size of sunspot cycle 22

Based on 'annual' averages, a bivariate analysis of the maximum amplitude of the sunspot cycle against its minimum amplitude and the minimum value of the aa geomagnetic index (in the vicinity of sunspot cycle minimum) results in a fit that closely matches the observable record. The bilinear fit has a high coefficient of correlation (r = 0.982) and a small standard deviation (s = 9.5), suggesting that it may be useful for predicting the size of a sunspot cycle 3 to 4 years before maximum amplitude occurrence. Applying the fit to cycle 22, the annual average of maximum amplitude is found to be 92 + or - 19 (equivalent to 96 + or - 20 in terms of the 13-month running mean or smoothed sunspot number).

Wilson, Robert M.↗
NASA NTRS1988

Development and properties of aluminum-clad graphite/epoxy tubes for space structures

This paper presents the development and properties of seamless aluminum-clad P75/Epoxy tubes and the unique manufacturing method used in their production. Thermo-mechanical properties of the tubes were determined analytically and verified by tests. These properties were shown to be suitable for space structures that require high stiffness, low weight and thermal expansion, and dimensional stability during operational life. A special feature of the tubes is the ability to tune the tube for thermal expansion after fabrication by a chemical milling process. The tubes are also resistant to atomic oxygen and handling damage. The toughness of the tubes was demonstrated by impact testing. Cyclic thermal testing showed no adverse effects on the expansion and stiffness behavior of the tubes. The paper also includes a discussion of a joining method that uses aluminum end fittings and an efficient scarf joint configuration. Additional studies considered various adhesives and fitting materials. Joint allowables were higher for titanium and B4C particulate magnesium fittings. The effect of different adhesives under static loading conditions favored the high-strength adhesives.

Johnson, R. R.↗
NASA NTRS1989

Expandable pallet for space station interface attachments

A foldable expandable pallet having a basic square configuration is disclosed. Each pallet is comprised of a plurality of struts, joined together by node point fittings to make a rigid structure. Some of the struts have hinge fittings and are spring loaded to permit collapse of the module for stowage and transport to a space station. Dimensions of the pallet are selected to provide convenient, closely spaced attachment points between the relatively widely spaced trusses of a space station platform. A pallet is attached to a truss at four points; one close fitting hole; two oversize holes; and a slot; to allow for thermal expansion/contraction and for manufacturing tolerances. Applications of the pallet include its use in rotary or angular joints; servicing of splints; with gridded plates; as an instrument mounting bases; and as a roadbed for a Mobile Service Center (MSC).

Clarence J Wesselski↗
NASA NTRS1988

The laboratory millimeter- and submillimeter-wave spectrum of the first two excited torsional states of (C-13)H3OH

The rotational-torsional spectrum of (C-13)H3OH is presented in both the symmetric and degenerate substates of the first two excited torsional states. Of the new transitions reported, 122 lines are from the v(t) = 1 torsional state and 110 lines are from the v(t) = 2 torsional state, and all are confined to the rotational quantum number J = 8 or less. The data are combined with previously reported millimeter and submillimeter data for the v(t) = 0 torsional state and 44 previously measured excited torsional state lines to form a global data set of 596 transitions, which is analyzed and fitted using an extended internal axis method. The fit results in an overall rms deviation of 1.98 MHz. The spectral constants generated by the fit are used to predict an additional 123 lines of (C-13)H3OH in the v(t) = 1,2 excited torsional states with frequencies up to 612 GHz and rotational quantum number J = 11 or less.

Anderson, Todd↗
NASA NTRS1989

Observational constraints on an embedded cloud model for the soft X-ray diffuse background

The reason for the observed anticorrelation between soft X-ray diffuse background (SXRB) and neutral hydrogen column densities are considered. Using the B and C band data from an all-sky survey of the SXRB, as well as data in the Be band, it is shown that the Jakobsen and Kahn (1986) embedded cloud model, in which several statistical properties of the SXRB in the B and C bands were used to constrain their model parameters, cannot fit the observed band ratios, except in the limit in which virtually all of the emission originates in the near side of the absorbing gas. It was also shown that model parameters corresponding to appreciably mixed emission and absorption, as proposed by Bunner et al. (1969) and Davidsen et al. (1972), do not fit the data. Model parameters corresponding to the absorption models of Bowyer et al. (1968), Bunner et al. (1969), Davidsen et al. (1972), and Yentis et al. (1972), cannot fit the data unless the absorbing material is more strongly clumped than is permitted by 21-cm observations.

Burrows, D. N.↗
NASA NTRS1989

The winds of O-stars. I - An analysis of the UV line profiles with the SEI method

The theoretical UV P Cygni profiles of the UV resonance lines for C IV, N V, Si IV, C III, and N IV of 26 O-type stars and one B star were calculated using the SEI method described by Lamers et al. (1987), taking into account the effects of turbulence in the wind, limb darkening, photospheric lines, and interstellar Ly alpha. The results were compared with profiles observed with the IUE satellite. The profile fits were found to be very accurate, showing significant improvement over previously obtained fits with the Sobolev (1958) method. The SEI method and the line fitting analysis are described and the results are presented in terms of the column densities and distributions of absorbing atoms, and the velocity laws.

Groenewegen, M. A. T.↗
NASA NTRS1989

Turbulent and directed plasma motions in solar flares

An improved method for fitting asymmetric soft X-ray line profiles from solar flares is presented. A two-component model is used where one component represents the total emission from directed upflow plasma and the other the emission from the plasma at rest. Unlike previous methods, the width of the moving component is independent from that of the stationary component. Time variations of flare plasma characteristics (i.e., temperature, emission measure of moving and stationary plasma, upflow and turbulent velocities) are derived from the Ca XIX and Fe XXV spectra recorded by the Bent Crystal Spectrometer on the Solar Maximum Mission. The fitting technique provides a statistical estimation for the uncertainties in the fitting parameters. The relationship between the directed and turbulent motions has been studied, and a correlation of the random and directed motions has been found in some flares with intensive plasma upflows. Mean temperatures of the upflowing and stationary plasmas are compared for the first time from ratios of calcium to iron X-ray line intensities. Finally, evidence for turbulent motions and the possibility of plasma upflow late into the decay phase is presented and discussed.

Fludra, A.↗
NASA NTRS1989

Geopotential models in the Australian region

The ability of three high-order geopotential models (OSU81, GPM2 and OSU86E) to recover the gravity anomaly field (delta g) in the Australian region was tested. The region was divided into 2 x 2 deg blocks, and the mean and rms of the residual gravity (delta g measured - delta g modeled) was found to estimate the fit of the model to the point gravity data. The results showed that OSU81 and GPM2 performed similarly, recovering the delta g with a mean value of less than plus or minus 5 mGal in 63 and 70 percent of the blocks, respectively. However, both these models achieved a fit of worse that was plus or minus 13 mGal in 6 to 7 percent of cases. These were in areas either on or near the coast, or in the Central Australian region, inferring that for a precise geoid slope determination in these regions, a detailed analysis of delta g in region is needed. On the other hand, OSU86E produced a very good result, having a mean fit of less than plus or minus 5 mGal in 80 percent of the blocks, and worse than plus or minus 13 mGal in only 1 percent of cases. The rms values for this model were also improved over the other two models, indicating that for applications requiring highest precision, the preferred model is OSU86E.

Kearsley, A. H. W.↗
NASA NTRS1990

Computer codes for the evaluation of thermodynamic properties, transport properties, and equilibrium constants of an 11-species air model

The computer codes developed provide data to 30000 K for the thermodynamic and transport properties of individual species and reaction rates for the prominent reactions occurring in an 11-species nonequilibrium air model. These properties and the reaction-rate data are computed through the use of curve-fit relations which are functions of temperature (and number density for the equilibrium constant). The curve fits were made using the most accurate data believed available. A detailed review and discussion of the sources and accuracy of the curve-fitted data used herein are given in NASA RP 1232.

Thompson, Richard A.↗
NASA NTRS1990

Surface characterizations of color threshold

The paper evaluates how well three different parametric shapes, ellipsoids, rectangles, and parallelograms, serve as models of three-dimentional detection contours. The constraints of the procedures for deriving the best-fitting shapes on inferences about the theoretical visual detection mechanisms are described. Results of two statistical tests show that only the parallelogram fits the data with more precision than the variance in repeated threshold measurements, and thus provides a slightly better fit than the other two shapes. Nevertheless it does not serve as a better guide than the ellipsoidal model for interpolating from the measurements to thresholds in novel color directions.

Poirson, Allen B.↗
NASA NTRS1990

Estimation of time- and state-dependent delays and other parameters in functional differential equations

A parameter estimation algorithm is developed which can be used to estimate unknown time- or state-dependent delays and other parameters (e.g., initial condition) appearing within a nonlinear nonautonomous functional differential equation. The original infinite dimensional differential equation is approximated using linear splines, which are allowed to move with the variable delay. The variable delays are approximated using linear splines as well. The approximation scheme produces a system of ordinary differential equations with nice computational properties. The unknown parameters are estimated within the approximating systems by minimizing a least-squares fit-to-data criterion. Convergence theorems are proved for time-dependent delays and state-dependent delays within two classes, which say essentially that fitting the data by using approximations will, in the limit, provide a fit to the data using the original system. Numerical test examples are presented which illustrate the method for all types of delay.

Murphy, K. A.↗
NASA NTRS1991

Effect Of Bed Rest On Tolerance To Acceleration

Report describes experimental comparative study of tolerance of aerobically fit men and sedentary men to +Gz acceleration. Designed to confirm or deny previous observations that long-term aerobic training reduces tolerance to acceleration. Data accumulated in study showed decrease in tolerance to acceleration caused by deconditioning effect of bed rest more pronounced in fit men than in sedentary men. Suggests physically fit people need additional measures to reduce loss of tolerance to acceleration during microgravity exposure.

Goldwater, Danielle J.↗
NASA NTRS1991

Overcenter collet space station truss fastener

A quick-connect fastener is arranged with a tubular body that is arranged to be engaged against the exterior surface of a hollow attachment fitting and coincidentally aligned with an opening in the fitting. A collet having normally-contracted fingers with outwardly-enlarged ends is operatively arranged in the body to be moved forwardly by an expander member mounted in the tubular body for advancing the collet fingers through the opening in the attachment fitting. Biasing means are arranged between the expander member and a toggle linkage in the tubular body which is selectively operated to urge the expander member forwardly into engagement with the collet fingers with an initial biasing force to advance their forward portions through the body opening and then expand them outwardly. The biasing means also provide a subsequent biasing force for retaining the collet members in their expanded positions once their enlarged forward end portions are on the opposite side of the body.

Sheridan, Philip L.↗
NASA NTRS1991

Accretion disk emission from a BL Lacertae object

It is suggested here that the UV and X-ray emission of BL Lac objects may originate in an accretion disk. Using detailed calculations of accretion disk spectra, the best-measured ultraviolet and soft X-ray spectra of the BL Lac object PKS 2155-304 are fitted, and the mass and accretion rate required is determined. The ultraviolet through soft X-ray continuum is well fitted by the spectrum of an accretion disk, but near-Eddington accretion rates are required to produce the soft X-ray excess. A hot disk or corona could Comptonize soft photons from the cool disk and produce the observed power-law spectrum in the 1-10 keV range. The dynamic time scale in the disk regions that contribute most of the observed ultraviolet and soft X-ray photons are consistent with the respective time scales for intensity variations observed in these two wave bands; the mass derived from fitting the continuum spectrum is consistent with the limit derived from the fastest hard X-ray variability.

Wandel, Amri↗
NASA NTRS1991

A light synthesis study of W Ursae Majoris

A common set of Roche model parameters produces an accurate fit to I, V, and B data for W Ursae Majoris. The R data are defective. Two pairs of cool photospheric starspots are adopted in producing the fit. The model also adopts the cross-correlation radial velocity obtained by McLean and satisfactorily eliminates evidence, cited in the literature, for a third body in the system. Changing starspot longitudes, while maintaining fixed angular diameter, latitude, and temperature contrast from the adjacent photosphere, can simulate all of the types of light curve instability recorded in historical W Ursae Majoris light curves. Although the theoretical curve accurately fits primary minimum in U, the theoretical curve is too shallow at secondary minimum. A hot secondary explanation of W-type light curves, rather than starspots on an otherwise barotropic photosphere is argued.

Linnell, Albert P.↗
NASA NTRS1991

Computer codes for the evaluation of thermodynamic and transport properties for equilibrium air to 30000 K

The computer codes developed here provide self-consistent thermodynamic and transport properties for equilibrium air for temperatures from 500 to 30000 K over a temperature range of 10 (exp -4) to 10 (exp -2) atm. These properties are computed through the use of temperature dependent curve fits for discrete values of pressure. Interpolation is employed for intermediate values of pressure. The curve fits are based on mixture values calculated from an 11-species air model. Individual species properties used in the mixture relations are obtained from a recent study by the present authors. A review and discussion of the sources and accuracy of the curve fitted data used herein are given in NASA RP 1260.

Thompson, Richard A.↗