Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Heating of foods in space-vehicle environments

In extended space missions, foods will be heated to enhance the psychological as well as the physiological well-being of the crew. In the low-gravity space environment natural convection is essentially absent so that the heat transfer within the food is by conduction alone. To prevent boiling in reduced pressure environments the maximum temperature of the heating system is severely limited. The Skylab food-heating system utilizes a tray with receptables for the food containers. The walls of the receptacles are lined with thermally controlled, electrical-resistance, blanket-type heating elements. A finite difference model is employed to perform parametric studies on the food-heating system. The effects on heating time of the (1) thermophysical properties of the food, (2) heater power level, (3) initial food temperatures, (4) container geometry, and (5) heater control temperature are presented graphically. The optimal heater power level and container geometry are determined.

Bannerot, R. B.↗
NASA NTRS1973

Numerical analysis of stiffened shear webs in the postbuckling range

The postbuckling behavior of shear webs divided into rectangular panels by stiffeners (uprights) was studied numerically, using the STAGS program in which two-dimensional finite differences are used to solve buckling and nonlinear problems. Universal nondimensional parameters, suggested by linear buckling data, are found to hold for the postbuckling range. Results indicate that the postbuckling stiffness of shear webs with isotropic panels is roughly two thirds of the prebuckling stiffness. The postbuckling behavior of shear webs with isotropic and orthotropic material properties is compared. Some practical aspects of solving nonlinear problems of this type by the numerical method employed are examined.

Stein, M.↗
NASA NTRS1973

A nonlinear programming approach for optimizing two-stage lifting vehicle ascent to orbit

An optimal atmospheric flight branched trajectory-shaping capability is presented based on the Davidon-Fletcher-Powell variable metric parameter optimization technique. Gradient information is generated using finite difference methods. A typical atmospheric flight branched optimization problem is analyzed which requires the determination of 31 parameters. This parameter set includes the three-dimensional description of vehicle attitude control angles for three branches of flight: first-stage ascent, second-stage ascent, and first-stage flyback. The important inflight inequality contraints required to maintain the integrity of the vehicles are considered. Some of the numerical methods employed are discussed, along with several new auxiliary techniques developed to improve the compatibility of the numerical gradient and iterator.

Kamm, J. L.↗
NASA NTRS1973

Calculation of separated flows at subsonic and transonic speeds

A boundary-layer integral approach is combined with a finite-difference relaxation method to calculate viscous interactions between separated flows at subsonic and transonic velocities. Results are obtained for separated laminar flows on circular-arc airfoils at zero angle of attack and are compared with data of Collins (1972). Inviscid and viscous flows are covered.

Klineberg, J. M.↗
NASA NTRS1973

Mars gravity derived from the long-period motion of Mariner 9

The spherical harmonic coefficients in the Mars gravity field are determined using a two-stage filtering process. In the first stage, a weighted least-squares orbit determination processor is applied to Mariner 9 radio data to estimate the mean Kepler elements of each orbit. A finite difference method is then used to generate orbital element rates. In the second stage, the gravity coefficients are determined using another weighted least-squares processor which fits the long period Lagrange perturbation equations to the estimated rates. The resulting gravity potential and associated equipotential surface is presented and error sources discussed. Gravity field results are applied to various physical properties of Mars, such as moments of inertia.-

Ferrari, A. J.↗
NASA NTRS1974

On laminar boundary-layer separation

Iterative finite-difference techniques are developed for integrating the boundary-layer equations, without approximation, through a region of reversed flow. The numerical procedures are used to calculate incompressible laminar separated flows and to investigate the conditions for regular behavior at the point of separation. Regular flows are shown to be characterized by an integrable saddle-type singularity that makes it difficult to obtain numerical solutions which pass continuously into the separated region. The singularity is removed and continuous solutions ensured by specifying the wall shear distribution and computing the pressure gradient as part of the solution. Calculated results are presented for a number of separated flows and the accuracy of the method is verified.

Klineberg, J. M.↗
NASA NTRS1974

Thermoacoustic convection of fluids in low gravity

The heat flow in a confined perfect gas in low gravity is investigated, including the effects of conduction and thermal convection. Buoyancy-driven flow is neglected, due to the low-gravity environment, but the effect of thermoacoustic motion due to fluid compressibility is included. One-dimensional mathematical models are constructed from the conservation equations for a compressible, viscous, heat-conducting fluid. A conservative, time-dependent finite-difference method is used to generate numerical solutions on a digital computer. Problems for flat plates and cylindrical segments are solved for specified thermal boundary conditions. Numerical results are given which indicate that thermoacoustic convection can significantly increase the transient heat flow over conduction model predictions for cases where a confined gas is rapidly heated.

Spradley, L. W.↗
NASA NTRS1974

Analysis of flow-reversal delay for a pitching airfoil

The coupled unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself.

Scruggs, R. M.↗
NASA NTRS1974

Viscous reacting flows with wall slip and catalysis applied to spheres in arc jets and flight

The influence of wall slip and catalytic atom-recombination on the flow field and wall heat flux are calculated for high altitude flight and arc jet flow conditions. Boundary equations, which include velocity slip, temperature jump, and wall catalytic atom recombination, are coupled to the viscous reacting multicomponent Navier-Stokes equations. These equations are solved using a time-dependent finite difference technique applied to spheres in an arc jet flow (Reynolds number of 550) and a high altitude flight case representative of the Space Shuttle Orbiter (Reynolds number of 450). The results indicate that catalysis strongly influences the temperature jump, but not the velocity slip. Slip increases the atom fraction and temperature at both the wall and the flow field. Likewise, the shock stand-off distance, the wall heat flux, and friction coefficient are increased over the nonslip cases. The reacting gas calculations confirm the chemically frozen nature of the shock layer in arc jet flows.

Scott, C. D.↗
NASA NTRS1974

Hypersonic chemically reacting viscous shock layers over sphere-cones and cylinder-wedges

Hypersonic, nonequilibrium viscous flow over nonanalytic blunt bodies is considered. The equations which govern the viscous shock-layer flow are presented and the method by which the equations are solved is discussed. The predictions of the present finite-difference method are compared with other numerical predictions as well as with experimental data. Three flow conditions are considered; the experimental, wind tunnel conditions of Pappas and Lee for a 7.5 deg sphere-cone at Mach 13 and two cases considered by Kang and Dunn, a 9 deg sphere-cone at 233,000 ft and a 20 deg sphere-cone at 280 and 310 Kft. The predictions of the present method agreed well with the experimental heat-transfer data, but substantial differences were found between the present predictions and the more approximate predictions of Kang and Dunn for heat-transfer distributions and temperature profiles.

Miner, E. W.↗
NASA NTRS1974

Propagation of sound through a real jet flowfield

The sound propagation of harmonic disturbances through a real jet flowfield, which contains mean flow gradients in pressure and velocities, has been studied. A finite-difference approximation for the equations which govern the acoustic disturbance is obtained for a subsonic axisymmetric jet in terms of acoustic pressure and acoustic energy flux. Experimental results are used to describe the mean flowfield of a model jet. The equations are solved numerically using a Newton-type iterative scheme. The directivity at various distances from a point source located at two jet diameters downstream of the jet exit on its center line compared qualitatively well with the numerical result of Schubert (1972) and with the experimental result of Grande (1966).

Liu, C. H.↗
NASA NTRS1973

Computer simulation of shock wave boundary layer interaction

Development of a boundary layer correction for an analysis program previously used by Bauer et al. (1972) to study two-dimensional flow past transonic airfoils at off-design conditions where shocks which interact with the boundary layer appear. Using a method which combines conformal mapping with a finite-difference scheme due to Murman and Cole (1971), an analysis is made of the interaction between shock waves on a supercritical wing section and a turbulent boundary layer, assuming that the shocks are weak and that separation is insignificant. It is shown that relatively simple shock wave/boundary layer interactions of the kind envisioned in this study can be treated by determining the displacement thickness iteratively together with the flow and altering the profile accordingly. It is concluded that the proposed boundary layer correction appears to furnish an essential improvement in cases where both pronounced aft loading and a large enclosed supersonic region of flow are present.

Bauer, F.↗
NASA NTRS1974

Internal hypersonic flow

An approach for studying hypersonic internal flow with the aid of a thin-shock-layer approximation is discussed, giving attention to a comparison of thin-shock-layer results with the data obtained on the basis of the imposition theory or a finite-difference integration of the Euler equations. Relations in the case of strong interaction are considered together with questions of pressure distribution and aspects of the boundary-layer solution.

Lin, T. C.↗
NASA NTRS1974

Stress, stability and vibration of complex, branched shells of revolution

A comprehensive computer program, designated BOSOR4, for analysis of the stress, stability, and vibration of segmented, ring-stiffened, branched shells of revolution and prismatic shells and panels is described. The program performs large-deflection axisymmetric stress analysis, small-deflection nonsymmetric stress analysis, modal vibration analysis with axisymmetric nonlinear prestress included, and buckling analysis with axisymmetric or nonsymmetric prestress. One of the main advantages of the code is the provision for realistic engineering details such as eccentric load paths, internal supports, arbitrary branching conditions, and a 'library' of wall constructions. The program is based on the finite-difference energy method, which is very rapidly convergent with increasing numbers of mesh points. The organization of the program is briefly described with the flow of calculations charted for each of the types of analysis. Overlay charts and core storage requirements are given for the CDC 6600, IBM 370/165, and UNIVAC 1108 versions of BOSOR4.

Bushnell, D.↗
NASA NTRS1974

Deviation angle estimation for axial-flow compressors using inviscid flow solutions

Development of a more satisfactory method of estimating deviation angles was attempted using analytical procedures. Solutions for inviscid, irrotational flow in the blade-to-blade plane were obtained with a finite-difference calculation method. Deviation angles for three cascades with rounded trailing edges were estimated using the inviscid flow solutions and four existing trailing edge hypotheses. The estimated deviation angles were compared with experimental values for a range of incidence angle and inlet flow angle. None of the hypotheses were satisfactory at all incidence angles for all the cascades considered. An alternative hypothesis is presented which is suitable for one of the cascade profiles over a range of incidence and blade setting angle.

Miller, M. J.↗
NASA NTRS1974

Liquefaction dynamics of n-octadecane in cylindrical coordinates

The study presents one method of mathematically modeling the effects of gravity-induced free convection upon the melting phenomena of a finite paraffin slab. The theoretical model is based on the numerical computer solution of the solid phase and liquid phase energy equations, coupled with an imposed ideal-viscous flow approximation. An implicit alternating-direction technique is used as the finite-difference approximation for the basic energy equations in the numerical solution. The theoretical predictions are compared to experimental data from an annular test cell, in which n-octadecane, C18H38, was used as the test material. The results show that the model is a good first approximation to the solution of solid-liquid phase change involving gravity-induced free convection.

Bain, R. L.↗
NASA NTRS1974

Influence of ablation impurities on blunt body re-entry ionization

Electron density profiles which include the effect of an ablated sodium impurity were computed for the boundary layer on a blunt-nosed body re-entering the atmosphere at 7.62 km/sec. Profiles are computed from the nose to a distance of four diameters along the RAM C-payload. A finite-difference, laminar, nonequilibrium chemistry boundary-layer program was used. Comparison of theory with S-band diagnostic antenna results, electron concentration deduced from X- and C-band attenuation data, and Langmuir probe data at several different aft body locations show that agreement is good at high altitude. At the lower altitudes there is disagreement between theory and S-band antenna data where the apparent discrepancy is attributed to the three-body recombination rate constant used for deionization of sodium coupled with the effect of angle of attack.

Schexnayder, C. J., Jr.↗