SEARCH · Engineering Papers

Results for “field study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Theoretical and Experimental Studies of the Transonic Flow Field and Associated Boundary Conditions near a Longitudinally-Slotted Wind-Tunnel Wall

A theoretical examination of the slotted-wall flow field is conducted to determine the appropriate wall pressure drop (or boundary condition) equation. This analysis improves the understanding of the fluid physics of these types of flow fields and helps in evaluating the uncertainties and limitations existing in previous mathematical developments. It is shown that the resulting slotted-wall boundary condition contains contributions from the airfoil-induced streamline curvature and the non-linear, quadratic, slot crossflow in addition to an often neglected linear term which results from viscous shearing in the slot. Existing and newly acquired experimental data are examined in the light of this formulation and theoretical developments.

Everhart, Joel Lee↗

NASA NTRS1987

Zoom lens compensator for a cylindrical window in laser anemometer uses

In laser anemometer systems, the flow fields under study are typically enclosed by a window. Aberration of a flat window can be corrected by a shift of the object distance. A zooming correction lens elimates the astigmatism caused by a thick cylindrical window and yields diffraction-limited performance for a monochromatic laser anemometer system. The effects of residual anamorphic distortion are discussed, and procedures for correcting these effects are presented.

Wernet, Mark P.↗

NASA NTRS1988

Thermal stresses in composite tubes using complementary virtual work

This paper addresses the computation of thermally induced stresses in layered, fiber-reinforced composite tubes subjected to a circumferential gradient. The paper focuses on using the principle of complementary virtual work, in conjunction with a Ritz approximation to the stress field, to study the influence on the predicted stresses of including temperature-dependent material properties. Results indicate that the computed values of stress are sensitive to the temperature dependence of the matrix-direction compliance and matrix-direction thermal expansion in the plane of the lamina. There is less sensitivity to the temperature dependence of the other material properties.

Hyer, M. W.↗

NASA NTRS1989

Comprehensive Silicon-Solar-Cell Program

Comprehensive Silicon Solar Cell Computer Modeling (SICELL) program simulates silicon solar cell. Predicts device parameters as efficiency, voltage-vs.-current characteristic fill factor, and temperature coefficients of parameters. Technique used similar to numerical-integration methods, but commonality described by use of mesh-point field. Validation studies show accuracies of simulations range from 0.08 percent to 3.6 percent for 27 experimental data points over temperature range of 300K to 421K. Results obtained by use of 10 mesh points in n- and p-type regions and for two iterations. SICELL runs interactively on VAX computer under VMS and written in VAX/VMS FORTRAN 77.

Lamorte, Michael F.↗

NASA NTRS1988

Geobotanical remote sensing for determination of aggregate source material

Aggregate source material suitable for facility and roadbed construction is often a very limited and highly valuable resource. The location of suitable source material is crucial to construction operations once facility requirements are established. The application of airborne and spaceborne remote sensing to terrain information requirements has proved attractive because of the rapid processing time and extensive spatial coverage associated with remotely gathered imagery. Source material identification may be improved by the remote sensing of vegetation associated with the material, particularly in areas of high vegetative cover. A research study employing remote sensing techniques was initiated to determine if vegetation could be used to discriminate parent materials for suitability as aggregate source material. Two test sites representing potential alluvial and residual source areas were selected in a semiarid region of Central California. Methods developed for the study included field observations of vegetation characteristics associated with the two parent material types along with the analysis of Thematic Mapper Simulator data flown over the test sites. The most useful images were those composites that included bands from two of the techniques (i.e., a Perpendicular Vegetation Index (PVI) band combined with principal components bands).

Minor, Timothy↗

NASA NTRS1989

A center for commercial development of space: Real-time satellite mapping. Remote sensing-based agricultural information expert system

The research project results in a powerful yet user friendly CROPCAST expert system for use by a client to determine the crop yield production of a certain crop field. The study is based on the facts that heuristic assessment and decision making in agriculture are significant and dominate much of agribusiness. Transfer of the expert knowledge concerning remote sensing based crop yield production into a specific expert system is the key program in this study. A knowledge base consisting of a root frame, CROP-YIELD-FORECAST, and four subframes, namely, SATELLITE, PLANT-PHYSIOLOGY, GROUND, and MODEL were developed to accommodate the production rules obtained from the domain expert. The expert system shell Personal Consultant Plus version 4.0. was used for this purpose. An external geographic program was integrated to the system. This project is the first part of a completely built expert system. The study reveals that much effort was given to the development of the rules. Such effort is inevitable if workable, efficient, and accurate rules are desired. Furthermore, abundant help statements and graphics were included. Internal and external display routines add to the visual capability of the system. The work results in a useful tool for the client for making decisions on crop yield production.

Hadipriono, Fabian C.↗

NASA NTRS1988

Aerosol backscatter variability at 10.6 microns over Colorado high plains during JAWS experiment

This paper describes the aerosol backscatter profile measurements obtained by an airborne CW focused CO2 Doppler lidar (the Laser True Airspeed System) during the 1982 Joint Airport Weather Studies (JAWS) field experiment. The backscatter sounding flights were made in the lee of the front range of the Colorado Rocky Mountains, at about 1650 m above mean sea level. The qualitative relationships between the backscatter and the vertical distribution of temperature and water vapor are described.

Rothermel, Jeffry↗

NASA NTRS1989

Electron acceleration by an obliquely propagating electromagnetic wave in the regime of validity of the Fokker-Planck-Kolmogorov approach

The relativistic motion of an ensemble of electrons in an intense monochromatic electromagnetic wave propagating obliquely in a uniform external magnetic field is studied. The problem is formulated from the viewpoint of Hamiltonian theory and the Fokker-Planck-Kolmogorov approach analyzed by Hizanidis (1989), leading to a one-dimensional diffusive acceleration along paths of constant zeroth-order generalized Hamiltonian. For values of the wave amplitude and the propagating angle inside the analytically predicted stochastic region, the numerical results suggest that the diffusion probes proceeds in stages. In the first stage, the electrons are accelerated to relatively high energies by sampling the first few overlapping resonances one by one. During that stage, the ensemble-average square deviation of the variable involved scales quadratically with time. During the second stage, they scale linearly with time. For much longer times, deviation from linear scaling slowly sets in.

Hizanidis, Kyriakos↗

NASA NTRS1989

Reynolds stress development in pressure-driven three-dimensional turbulent boundary layers

The development of the Reynolds stress field was studied for flows in which an initially two-dimensional boundary layer was skewed sideways by a spanwise pressure gradient ahead of an upstream-facing wedge. Two different wedges were used, providing a variation in the boundary-layer skewing. Measurements of all components of the Reynolds stress tensor and all ten triple products were measured using a rotatable cross-wire anemometer. The results show the expected lag of the shear stress vector behind the strain rate. Comparison of the two present experiments with previous data suggests that the lag can be estimated if the radius of curvature of the free-stream streamline is known. The magnitude of the shear stress vector in the plane of the wall is seen to decrease rapidly as the boundary-layer skewing increases. The amount of decrease is apparently related to the skewing angle between the wall and the free stream. The triple products evolve rapidly and profiles in the three-dimensional boundary layer are considerably different than two-dimensional profiles, leaving little hope for gradient transport models for the Reynolds stresses. The simplified model presented by Rotta (1979) performs reasonably well providing that an appropriate value of the T-parameter is chosen.

Anderson, Shawn D.↗

NASA NTRS1989

ECRH of trapped electrons in laboratory magnetoplasmas

Heating of plasma electrons by high power millimeter wave fields at cyclotron harmonic resonance is studied. A mirror field is modeled for the local trapping of electrons. It is shown that superthermal electrons can be generated as the consequence of the ECRH of trapped electrons.

Kuo, S. P.↗

NASA NTRS1990

Soft inflation

The cosmology resulting from two coupled scalar fields was studied, one which is either a new inflation or chaotic type inflation, and the other which has an exponentially decaying potential. Such a potential may appear in the conformally transformed frame of generalized Einstein theories like the Jordan-Brans-Dicke theory. The constraints necessary for successful inflation are examined. Conventional GUT models such as SU(5) were found to be compatible with new inflation, while restrictions on the self-coupling constant are significantly loosened for chaotic inflation.

Berkin, Andrew L.↗

NASA NTRS1990

Soft inflation

Berkin, Andrew L.↗

NASA NTRS1990

A statistical study of ions and magnetic fields in the Venus magnetotail

A statistical characterization is made of the combined ion and magnetic field properties of the Venus magnetosheath and magnetotail, on the basis of plasma and magnetic field data from 223 Pioneer Venus orbits; no assumptions are made as to existing regions or their plasma and field characteristics. Plasma is found to flow tailward in all locations, and the magnetotail is highly draped. Weak magnetic field asymmetries are associated with the plasma dropouts. A high-E/q plasma population, previously interpreted as planetary-pickup ions, is found asymmetrically both within the tail and in the adjacent sheath. The Venus tail is filled with plasma that is primarily shocked solar wind, at fluxes that are sometimes undetectable; the tail coexists with a photoion population which generates asymmetries in the bulk plasma and magnetic field properties.

Moore, K. R.↗

NASA NTRS1990

Helicopter far-field acoustic levels as a function of reduced main-rotor advancing blade-tip Mach number

During the design of a helicopter, the weight, engine, rotor speed, and rotor geometry are given significant attention when considering the specific operations for which the helicopter will be used. However, the noise radiated from the helicopter and its relationship to the design variables is currently not well modeled with only a limited set of full-scale field test data to study. In general, limited field data have shown that reduced main-rotor advancing blade-tip Mach numbers result in reduced far-field noise levels. The status of a recent helicopter noise research project is reviewed. It is designed to provide flight experimental data which may be used to further understand helicopter main-rotor advancing blade-tip Mach number effects on far-field acoustic levels. Preliminary results are presented relative to tests conducted with a Sikorsky S-76A helicopter operating with both the rotor speed and the flight speed as the control variable. The rotor speed was operated within the range of 107 to 90 percent NR at nominal forward speeds of 35, 100, and 155 knots.

Mueller, Arnold W.↗

NASA NTRS1990

Containerless processing projects

The primary research objective was the examination of fundamental acoustics of the Drop Physics Module. An advanced chamber system was developed for acoustics and sample characterization. Sample interaction with an acoustic field was studied. The shaping of liquid drops by acoustic forces was also examined. The acoustic torque as a function of sample position and shape was studied along with levitated sample stability and the effects of feedback systems.

Source record↗

NASA NTRS1991

Data analysis for the Pioneer-Venus electric field detector

Research on plasma waves observed in the ion foreshock at Venus and on the impulsive bursts observed in the nightside ionosphere was performed. Some results from the ion foreshock, wave polarization, and the dependence on magnetic field orientation studies are described. An analysis of data acquired using 4096 BPS data is also presented.

Source record↗

NASA NTRS1990

Fast magnetization of a high-to-low-beta plasma beam

The magnetization of a high-beta (plasma energy density/magnetic-field energy density) hydrogen-plasma beam injected into a vacuum transverse magnetic field is studied experimentally. Nominal parameters were Ti = 1 eV, Te = 5 eV, n = 3 x 10 to the 13th/cu cm or less, v(i) = 7 x 10 to the 6th cm/sec or less, t(pulse) less than 70 microsec, and Bz = 300 G or less. Plasma characteristics were measured for a wide beam and a downstream distance, x = 300 rho(i) or less, where x is the downstream distance and rho(i) is the ion gyroradius. A brief initial state of diamagnetic propagation is observed, followed by magnetized propagation accompanied by beam compression transverse to B with as much as a factor of 4 increase in density and a slight drift of the beam in the ion Lorentz force direction.

Song, J. J.↗

NASA NTRS1990

Wave generation by turbulent convection

Wave generation by turbulent convection in a plane parallel, stratified atmosphere lying in a gravitational field is studied. The turbulent spectrum is related to the convective energy flux via the Kolmogorov scaling and the mixing length hypothesis. Efficiencies for the conversion of the convective energy flux into both trapped and propagating waves are estimated.

Goldreich, Peter↗