Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Exchange-Mediated Transport in Battery Electrolytes: Ultrafast or Ultraslow?

Understanding the mechanisms of charge transport in batteries is important for the rational design of new electrolyte formulations. Persistent questions about ion transport mechanisms in battery electrolytes are often framed in terms of vehicular diffusion by persistent ion–solvent complexes versus structural diffusion through the breaking and reformation of ion–solvent contacts, i.e., solvent exchange events. Ultrafast two-dimensional (2D) IR spectroscopy can probe exchange processes directly via the evolution of the cross-peaks on picosecond time scales. However, vibrational energy transfer in the absence of solvent exchange gives rise to the same spectral signatures, hiding the desired processes. Here we employ 2D IR on solvent resonances of a mixture of acetonitrile isotopologues to differentiate chemical exchange and energy-transfer dynamics in a comprehensive series of Li + , Mg 2+ , Zn 2+ , Ca 2+ , and Ba 2+ bis(trifluoromethylsulfonyl)imide electrolytes from the dilute to the superconcentrated regime. No exchange phenomena occur within at least 100 ps, regardless of the ion identity, salt concentration, and presence of water. All of the observed spectral dynamics originate from the intermolecular energy transfer. These results place the lower experimental boundary on the ion–solvent residence times to several hundred picoseconds, much slower than previously suggested. With the help of MD simulations and conductivity measurements on the Li + and Zn 2+ systems, we discuss these results as a continuum of vehicular and structural modalities that vary with concentration and emphasize the importance of collective electrolyte motions to ion transport. These results hold broadly applicable to many battery-relevant ions and solvents.

25 ENERGY STORAGE↗
DOE OSTI2025

Drosophila melanogaster pigmentation demonstrates adaptive phenotypic parallelism over multiple spatiotemporal scales

Abstract Populations are capable of responding to environmental change over ecological timescales via adaptive tracking. However, the translation from patterns of allele frequency change to rapid adaptation of complex traits remains unresolved. We used abdominal pigmentation in Drosophila melanogaster as a model phenotype to address the nature, genetic architecture, and repeatability of rapid adaptation in the field. We show that D. melanogaster pigmentation evolves as a highly parallel and deterministic response to shared environmental variation across latitude and season in natural North American populations. We then experimentally evolved replicate, genetically diverse fly populations in field mesocosms to remove any confounding effects of demography and/or cryptic structure that may drive patterns in wild populations; we show that pigmentation rapidly responds, in parallel, in fewer than 15 generations. Thus, pigmentation evolves concordantly in response to spatial and temporal climatic axes. We next examined whether phenotypic differentiation was associated with allele frequency change at loci with established links to genetic variance in pigmentation in natural populations. We found that across all spatial and temporal scales, phenotypic patterns were associated with variation at pigmentation-related loci, and the sets of genes we identified at each scale were largely nonoverlapping. Therefore, our findings suggest that parallel phenotypic evolution is associated with distinct components of the polygenic architecture shifting across each environmental axis to produce redundant adaptive patterns.

Evolutionary Biology↗
DOE OSTI2026

Three-dimensional simulation of the University of Hawai‘i FEL oscillator with cavity desynchronization

In this paper, we present three-dimensional, time-dependent simulations of the University of Hawai‘i (UH) at Mānoa free-electron laser (FEL) oscillator. Using beam parameters from the UH facility, we study the pass-by-pass evolution of the radiation field, including its temporal, spectral, and transverse properties. At nominal bunch length, the radiation pulse develops temporal spiking near saturation, together with sideband formation and increased sensitivity to machine timing jitter. Our results show that modest cavity desynchronization can enhance the radiation energy by 63%. Large cavity desynchronization, on the other hand, can effectively suppress the spiking instabilities and improve robustness to timing fluctuations. Finally, we simulate a short-bunch operational mode with a bunch length comparable to the slippage length, which accelerates saturation and further amplifies the FEL power. Overall, these results provide a quantitative foundation for pulse control studies in the UH FEL oscillator and a critical benchmark for future experimental validation and machine optimization.

free-electron lasers↗
DOE OSTI2021

Evolution of Pore Structure and Permeability of Rocks Under Hydrothermal Conditions (Final Report)

The physical and transport properties of porous rocks can be altered by a variety of diagenetic, metamorphic, and tectonic processes, and the changes that result are of critical importance to such industrial applications as resource recovery, carbon dioxide sequestration, and waste isolation in geologic formations. The associated interrelationships between rocks, pore fluids and deformation are also key to understanding many natural processes, including dynamic metamorphism, fault mechanics, fault stability and pressure solution creep. In this project, we investigated the changes of permeability and pore geometry owing to inelastic deformation by solution-transfer, brittle fracturing and dislocation creep. In particular, we studied the coupling between pore fluids and deformation in fluid-filled quartz, calcite, mudstones and ultramafic rocks and examine the effects of coupled mechanical and chemical processes on the evolution of porosity and permeability under hydrothermal conditions. The investigations used a combination of techniques, that included triaxial laboratory experiments; uniaxial compressive loading with in situ observations of microstructure; permeability under hydrostatic compression; observations of microstructure using optical and electron microscopes, and micro-CT imaging; and numerical calculations. Laboratory experiments were designed to provide mechanical and transport data under conditions that isolate the particular mechanisms responsible for the changes. The data obtained were used to quantify changes in surface roughness, porosity, pore dimensions and their spatial fluctuations. The results of the experiments and data from image analyses were compared to the results of network, finite-difference and other numerical models to verify the validity of experimentally established relations between permeability and other rock properties. A bibliography for the period from 2015-2019 is appended below. New results obtained in the final year and the unfunded extension period are detailed below.

58 GEOSCIENCES↗
DOE OSTI2021

Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)

In order to evaluate the viability of ShAPE processed Mg alloys as a feedstock for fabricating lightweight sheet material, tubes consisting of ShAPE-extruded Mg alloy ZK60 were flattened into plates and hot rolled at 450 °C to reductions of 37%, 68%, and 93%. The mechanical properties and microstructure of the rolled material were characterized through tensile testing and electron backscattered diffraction (EBSD). ZK60 specimens rolled to 68% reduction had tensile properties similar to published properties of rolled ZK60 sheets fabricated using conventional processes, and exhibited negligible tensile anisotropy referenced to the rolling direction. Additional rolling from 68% to 93% reduced the ultimate tensile stress in the rolling direction from 341.74±5.96 MPa to 260.76±22.4MPa. The yield stress and elongation to failure of the material also decreased from 292.16±1.11 MPa to 256.93±18.4 MPa and 6.95±1.94% to 3.38±0.51%, respectively, but negligible little anisotropy was observed with respect to loading direction. EBSD mapping indicated that the as-extruded ZK60 had texture rotated away from the basal direction which developed into a strong basal texture over numerous hot rolling steps. This evolution in texture has been observed after rolling for hot-rolled ZK60 fabricated through conventional extrusion processes. The initial grain structure was found to have experienced noticeable twinning from flattening the tube into plate. After hot rolling, the grain structure became more equiaxed, but the average grain diameter did not change appreciably from 5.15 ± 3.39 µm in the ShAPE extruded material, to 5.27 ± 12.44 µm in the 93% hot rolled sheet. This response to hot rolling is similar to the response of ZK60 fabricated using other methods such as Equal Channel Angular Processing (ECAP). Therefore, this work demonstrates ShAPE has the potential as an alternative method to producing feedstock for Mg alloy sheets. Modifications to the experimental procedure which could lead to improvements in observed properties are briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental and Theoretical Thermokinetic Analysis of the Na 3 VO 4 –CO 2 Reaction System under Different Physicochemical Conditions

Sodium vanadate (Na 3 VO 4 ) was synthesized, structural and microstructurally characterized as well as tested as possible carbon dioxide (CO 2 ) captor through thermodynamic calculations in addition to thermogravimetric dynamic and isothermal analyses. Ceramic structural characterization evidenced the formation of the Na 3 VO 4 crystal phase, while microstructural features evidenced dense agglomerates with a poor specific surface area, although synthesis temperature (600 °C) was not as high as that for other sodium ceramics. Na 3 VO 4 was investigated for the CO 2 capture process through dynamic and isothermal experiments, in the presence or absence of oxygen. All these experiments showed that Na 3 VO 4 possesses interesting CO 2 capture properties in a specific temperature range (520 and 600 °C). Isothermal products characterization allowed to elucidate the reaction pathway, implying the Na 4 V 2 O 7 formation, as possible reactive intermediate. In fact, reaction path evolution was supported with theoretical thermodynamic data. Moreover, the kinetic analysis, performed using the Avrami-Erofeev mathematical model and subsequent thermodynamic data obtention, probed the positive influence of the temperature, in both CO 2 superficial and bulk chemical sorption processes, while oxygen addition did not enhance the superficial process. Additionally, as it would be expected, kinetics were enhanced as a function of the CO 2 concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sigma phase evolution and nucleation mechanisms revealed by atom probe tomography in a 347H stainless steel

The size evolution and phase composition of sigma phases were investigated for a 347H stainless steel subject to isothermal aging at 750 °C for up to 10,000 h. Scanning electron microscopy reveals that sigma phases are present before 336 h aging and they continue to grow for all aging times studied. Atom probe tomography shows little variation in the sigma phase composition with aging time up to 10,000 h, and only the C content decreases with aging time. The comparison of C concentration suggests that the sigma phase does not nucleate within the C-depleted matrix or precipitate free grain boundaries, leaving dissolving metastable M 23 C 6 as the only possible nucleation site. Based on the experimental results and thermodynamic simulations, the desirable Nb concentration is discussed to reduce the kinetics of sigma phase growth, and possible design directions are suggested to improve 347H.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperature

This work studies the evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperatures (up to 800 °C). A multiscale investigation is carried out to study the thermal degradation of cementitious composite materials at multiple scale levels: at cement past level, the dehydration kinetics of cement hydrates (i.e., C–S–H, CH and aluminate hydrates) and development of microcracks are studied as functions of exposure temperatures. The damage mechanism of the inclusion phases and damages within the interfacial transition zone (ITZ) under elevated temperature are also investigated. In addition, the change of mechanical (i.e., elastic moduli, compressive strengths) and thermal (thermal conductivities) properties are measured as functions of the exposure temperature. Based on the experimental studies, a multiscale thermal degradation model is developed where the thermal degradations of cement paste (including water composition, porosity, and solid phase changes), inclusion phases, and the interfaces are captured through a multiscale sub-stepping homogenization scheme. The thermal degradation model is validated through multiple sets of experimental data. Finally, the influence of key parameters including the particle size distribution of the inclusions, the chemical composition, as well as the effects of ITZ damage are studied.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Melting and phase relations of Fe-Ni-Si determined by a multi-technique approach

Many studies have suggested silicon as a candidate light element for the cores of Earth and Mercury. However, the effect of silicon on the melting temperatures of core materials and thermal profiles of cores is poorly understood, due to disagreements among melt detection techniques, uncertainties in sample pressure evolution during heating, and sparsity of studies investigating the combined effects of nickel and silicon on the phase diagram of iron. Here, in this study we develop a multi-technique approach for measuring the high-pressure melting and solid phase relations of iron alloys and apply it to Fe 0.8 Ni 0.1 Si 0.1 (Fe-11wt%Ni-5.3wt%Si), a composition compatible with recent estimates for the cores of Earth and Mercury. This approach combines results (20-83 GPa) from two atomic-level techniques: synchrotron Mossbauer spectroscopy (SMS) and synchrotron x-ray diffraction (XRD). Melting is independently detected by the loss of the Mossbauer signal, produced exclusively by solid-bound iron nuclei, and the onset of a liquid diffuse x-ray scattering signal. The use of a burst heating and background updating method for quantifying changes in the reference background during heating facilitates the determination of liquid diffuse signal onsets and leads to strong reproducibility and excellent agreement in melting temperatures determined separately by the two techniques. XRD measurements additionally constrain the hcp-fcc phase boundary and in-situ pressure evolution of the samples during heating. We apply our updated thermal pressure model to published SMS melting data on fcc-Fe and fcc-Fe 0.9 Ni 0.1 to precisely evaluate the effect of silicon on melting temperatures. We find that the addition of 10 mol% Si to Fe 0.9 Ni 0.1 reduces melting temperatures by ~250 K at low pressures (<60 GPa) and flattens the hcp-fcc phase boundary. Extrapolating our results, we constrain the location of the hcp-fcc-liquid quasi-triple point at 147±14 GPa and 3140±90 K, which implies a melting temperature reduction of 500 K compared with Fe 0.9 Ni 0.1 . The results demonstrate the advantages of combining complementary experimental techniques in investigations of melting under extreme conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Is Deprotonation of the Oxygen-Evolving Complex of Photosystem II during the S 1 → S 2 Transition Suppressed by Proton Quantum Delocalization?

We address the protonation state of the water-derived ligands in the oxygen-evolving complex (OEC) of photosystem II (PSII), prepared in the S 2 state of the Kok cycle. We perform quantum mechanics/molecular mechanics calculations of isotropic proton hyperfine coupling constants, with direct comparisons to experimental data from two-dimensional hyperfine sublevel correlation (HYSCORE) spectroscopy and extended X-ray absorption fine structure (EXAFS). We find a low-barrier hydrogen bond with significant delocalization of the proton shared by the water-derived ligand, W1, and the aspartic acid residue D1–D61 of the D1 polypeptide. The lowering of the zero-point energy of a shared proton due to quantum delocalization precludes its release to the lumen during the S 1 → S 2 transition. Retention of the proton facilitates the shuttling of a proton during the isomerization of the tetranuclear manganese–calcium–oxo (Mn 4 Ca–oxo) cluster, from the “open” to “closed” conformation, a step suggested to be necessary for oxygen evolution from previous studies. Our findings suggest that quantum-delocalized protons, stabilized by low-barrier hydrogen bonds in model catalytic systems, can facilitate the accumulation of multiple oxidizing equivalents at low overpotentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The electron-transfer intermediates of the oxygen evolution reaction (OER) as polarons by in situ spectroscopy

The conversion of diffusive forms of energy (electrical and light) into short, compact chemical bonds by catalytic reactions regularly involves moving a carrier from an environment that favors delocalization to one that favors localization. While delocalization lowers the energy of the carrier through its kinetic energy, localization creates a polarization around the carrier that traps it in a potential energy minimum. The trapped carrier and its local distortion—termed a polaron in solids—can play a role as a highly reactive intermediate within energy-storing catalytic reactions but is rarely discussed as such. Here, we present this perspective of the polaron as a catalytic intermediate through recent in situ and time-resolved spectroscopic investigations of photo-triggered electrochemical reactions at material surfaces. The focus is on hole-trapping at metal–oxygen bonds, denoted M–OH*, in the context of the oxygen evolution reaction (OER) from water. The potential energy surface for the hole-polaron defines the structural distortions from the periodic lattice and the resulting “active” site of catalysis. This perspective will highlight how current and future time-resolved, multi-modal probes can use spectroscopic signatures of M–OH* polarons to obtain kinetic and structural information on the individual reaction steps of OER. A particular motivation is to provide the background needed for eventually relating this information to relevant catalytic descriptors by free energies. Lastly, the formation of the O–O chemical bond from the consumption of M–OH*, required to release O 2 and store energy in H 2 , will be discussed as the next target for experimental investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transport barrier and spinning blob dynamics in the tokamak edge

Abstract In this work, we investigate the dynamics of plasma blobs in the edge of magnetic confinement devices using a full-f gyrokinetic particle-in-cell code with X-point geometry. In simulations, the evolution of a seeded blob is followed as it approaches a naturally-forming zonal shear layer near the separatrix, where the blob is stabilized by a large spin induced by the self-consistent adiabatic electron response, and blob bifurcation and trapping are observed during the cross-field propagation of blobs. A new theoretical explanation in both the zonal free and zonal shear layer is constructed, where the dominant E × B spin motion is included. A theoretical condition for a transport barrier induced by the interaction between spinning blobs and the zonal shear layer is obtained, and its scaling is verified with simulations. The new theoretical framework, especially the transport barrier, is applicable to explain and predict various experimental phenomena. In particular, the transport barrier condition calculated with experimental parameters demonstrates that the blob radial transport for H mode is smaller than L mode in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Performing In Situ Closed-Cell Gas Reactions in the Transmission Electron Microscope

Gas reactions studied by in situ electron microscopy can be used to capture the real-time morphological and microchemical transformations of materials at length scales down to the atomic level. In situ closed-cell gas reaction (CCGR) studies performed using (scanning) transmission electron microscopy (STEM) can separate and identify localized dynamic reactions, which are extremely challenging to capture using other characterization techniques. For these experiments, we used a CCGR holder that utilizes microelectromechanical systems (MEMS)-based heating microchips (hereafter referred to as "E-chips"). The experimental protocol described here details the method for performing in situ gas reactions in dry and wet gases in an aberration-corrected STEM. This method finds relevance in many different materials systems, such as catalysis and high-temperature oxidation of structural materials at atmospheric pressure and in the presence of various gases with or without water vapor. Here, several sample preparation methods are described for various material form factors. During the reaction, mass spectra obtained with a residual gas analyzer (RGA) system with and without water vapor further validates gas exposure conditions during reactions. Integrating an RGA with an in situ CCGR-STEM system can, therefore, provide critical insight to correlate gas composition with the dynamic surface evolution of materials during reactions. In situ/operando studies using this approach allow for detailed investigation of the fundamental reaction mechanisms and kinetics that occur at specific environmental conditions (time, temperature, gas, pressure), in real-time, and at high spatial resolution.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Isolating the Electrocatalytic Activity of a Confined NiFe Motif within Zirconium Phosphate

Unique classes of active-site motifs are needed for improved electrocatalysis. Herein, the activity of a new catalyst motif is engineered and isolated for the oxygen evolution reaction (OER) created by nickel–iron transition metal electrocatalysts confined within a layered zirconium phosphate matrix. It is found that with optimal intercalation, confined NiFe catalysts have an order of magnitude improved mass activity compared to more conventional surface-adsorbed systems in 0.1 m KOH. Interestingly, the confined environments within the layered structure also stabilize Fe-rich compositions (90%) with exceptional mass activity compared to known Fe-rich OER catalysts. Through controls and by grafting inert molecules to the outer surface, it is evidenced that the intercalated Ni/Fe species stay within the interlayer during catalysis and serve as the active site. After determining a possible structure (wycherproofite), density functional theory is shown to correlate with the observed experimental compositional trends. It is further demonstrated that the improved activity of this motif is correlated to the Fe and water content/composition within the confined space. This work highlights the catalytic enhancement possibilities available through zirconium phosphate and isolates the activity from the intercalated species versus surface/edge ones, thus opening new avenues to develop and understand catalysts within unique nanoscale chemical environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanics of vitrimer particle compression and fusion under heat press

The compression and fusion of vitrimer particles is a fundamental problem underlying the recycling of vitrimers. Incomplete particle compression can lead to voids in the fused vitrimer, thereby impacting its mechanical property. In this work, we present a two-dimensional finite element model to capture the interplay of multiple complex mechanisms including random particle packing, large deformation, inter-particle contact, thermally activated bulk stress relaxation, and interface healing. Specifically, we focus on understanding two key components of this problem: i) evolution of porosity during compression and fusion of randomly packed vitrimer particles, and ii) effective tensile modulus and strength of fused vitrimer. Using the finite element model, we first show that using smaller particles can reduce the porosity in the fused vitrimer, which only slightly increases the effective modulus, but the increase in tensile strength is more pronounced. In addition, under the same processing conditions, particles with mixed sizes can achieve better densification and higher tensile strength after fusion than uniformly sized particles with the same average radius. Regarding the effects of processing conditions, we discuss how the porosity and effective modulus of the fused vitrimer depend on the processing time, temperature and pressure, and find a general trend consistent with experimental observations, i.e. longer processing time, higher temperature or higher pressure can lead to lower porosity and higher modulus of the fused vitrimer. Finally, the theoretical insights towards the compression and fusion process as well as the simulation framework can be useful in optimizing the powder-based heat press process of vitrimer and its composites.

42 ENGINEERING↗
DOE OSTI2022

HERA M&S Exercise Problem Description Report

The Nuclear Energy Agency (NEA) Framework for Irradiation Experiments (FIDES) program includes the High burnup Experiments for Reactivity initiated Accident (HERA) Joint Experimental Program (JEEP). The HERA project is focused on studying Light Water Reactor (LWR) fuel behavior during Reactivity Initiated Accident (RIA) conditions. The HERA experiment plan includes analytical integral experiments using test specimens tailored to investigate specific conditions of relevance as well as prototypic integral experiments focused on irradiated fuel from prototypic origin. Modeling & simulation (M&S) is a key component of any experiment program, and the HERA JEEP is coordinating a M&S exercise. The purpose of this document is to provide problem descriptions to support the HERA M&S exercise based on fuel performance modeling. The HERA M&S exercise is expected to evolve into multiple efforts in outyears. This document may be revised and expanded to incorporate those evolutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Discovery of multimechanisms of screw dislocation interaction in bcc iron from open-ended saddle point searches

Dislocation motion and interactions determine mechanical properties in body-centered cubic (bcc) metallic materials. However, studying mechanisms for the screw dislocation interaction is fundamentally challenging since many underlying processes involve mesotimescales and atomistic resolution, currently inaccessible by either experimental techniques or continuum theoretical methods. Here, in this paper, we develop a computational capability based on self-evolving atomistic kinetic Monte Carlo (SEAKMC) to sample the critical events and saddle point energies related to screw dislocations and their junctions. The method is first validated by calculating the stress dependence of Peierls barriers and formation energies of kink pairs and cross-slip kink pairs on a single screw dislocation in bcc iron. Then the method is applied to a binary junction of a pair of intersecting screw dislocations, the structure of which is crucial for low-temperature plastic deformation. We identify three important mechanisms: coplanar cross-slipping, jog-pinning, and a previously unknown unzipping mechanism during the evolution of the binary junction. The mechanisms are then further validated using classical molecular dynamics simulations. The computational capability developed in this paper provides an effective tool to evaluate screw dislocation related thermally activated events in complex stress conditions. The mechanisms discovered in this paper provide critical insights into temperature dependence of the anomalous slip, a breakdown of the Schmidt law, during the plastic deformation in bcc iron and can be generalized to other bcc metals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding Novel Lewis Acid Doping Mechanisms in Organic Semiconductors

Recent studies supported by this DOE grant have provided a more detailed understanding of the doping mechanism of organic semiconductors by the Lewis acid, tris(pentafluorophenyl)borane (BCF). Our studies have examined the intermolecular semiconductor-dopant interactions as well as the thermodynamic feasibility of different doping mechanisms. Most notably, we found a different proposed doping scheme is much more thermodynamically favoured (exergonic) than our proposed two-step BCF doping mechanism. The state-of-the-art experimental and theoretical techniques of High-Field Multi-Dimensional Solid State NMR spectroscopy and Time-Dependent Density Functional theory (TD-DFT) and DFT were employed in this work. The data obtained helped identify the structural details and intermolecular interactions which impact the organic semiconductor doping efficiency for BCF and how these compare to the case of doping by the standard integer charge transfer dopant molecule F 4 TCNQ. We have, for the first time, assigned specific chemical shift values for the F 4 TCNQ molecules clustered outside of polymer chains as well as those intercalated between the polymer backbones. Further, we provide theoretical support for a novel doping mechanism which combines those proposed in previous literature involving the evolution of hydrogen gas along with a doping species more complex than the simple BCF·H 2 O. While our previously proposed doping mechanism was found to be highly thermodynamically unfavorable, the formation of large anion [BCF(OH)(OH 2 )BCF]- is the key change making the proposed mechanism exergonic while the elimination of gaseous H 2 helps drive the doping reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗