Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error indicators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Skylab S-193 altimeter experiment performance, results and applications

A description of the Skylab altimeter instrument system along with the appropriate system error model is presented. The data processing flow, orbit computation, and topographic recovery techniques are discussed. Some data analysis results are presented which indicate excellent correlation with underwater topographic features. In addition, results are shown which indicate that the instrument performance was as expected.

Mcgoogan, J. T.↗

Ozone spectroscopy with a CO2 waveguide laser

Ozone spectral measurements were conducted with a waveguide CO2 laser, which was continuously tunable over a + or - 450-MHz region, about several lines in the P-branch of the band near the 9.5-micron wavelength region. A passively stabilized low-pressure CO2 laser was also used to provide reference CO2 frequencies. The frequencies of several ozone lines were determined in the nu-3 band, which are near CO2 laser line frequencies in the 9.5-micron wavelength region. The absolute measurement accuracy is estimated to be + or - 6 MHz, and the measurements indicate that the ozone line frequencies listed in currently available spectral compilations are 0.003-0.006 per cm too high. The size of this error is small by conventional IR standards, but extremely important when CO2 laser instruments are used to monitor stratospheric ozone, where line widths in this spectral region are typically 0.001/cm. Empirically determined absorption curves must be constructed in order to calibrate laser differential absorption instrument properly when low-altitude ozone measurements are conducted.

Menzies, R. T.↗

Controlled freezing of biological samples

Apparatus consists of thermocouple connected to semiconductor reference junction. Junction is connected to amplifier that boosts signal by 1,000. High-level signal is displayed on recorder and fed into second amplifier where it is compared with signal from potentiometer of programmed dc reference in bag-temperature programer. Difference in signals indicates output voltage. Remaining circuitry provides zero-phase, time-proportion control of heaters such that heater power is directly proportional to error signal.

Cygnarowicz, T. A.↗

Alignment control study for the solar optical telescope

Analysis of the alignment and focus errors than can be tolerated, methods of sensing such errors, and mechanisms to make the necessary corrections were addressed. Alternate approaches and their relative merits were considered. The results of this study indicate that adequate alignment control can be achieved.

Source record↗

Some modern control techniques for human operator modeling and identification

Some recent results in quantitative modeling of the human operator are reviewed as well as a method for processing his input-output data. Modern control techniques are applied to the pilot operating in a dynamic compensatory tracking task. Trained pilots are known to behave in an optimal manner under fully stressed conditions. This has led to the development of an optimal control model of the human operator which takes his limitations into account. A rationale for determining the appropriate cost functions is determined. Experimental results indicate that the model can closely predict pilot performance in one- or two-axis tracking tasks. The model predicts pilot remnant (noise), error scores, and frequency response in both single-axis and multi-axis tracking tasks.

Shirley, R. S.↗

Slicing of Silicon into Sheet Material. Silicon Sheet Growth Development for the Large Area Silicon Sheet Task of the Low Cost Silicon Solar Array Project

Tests on mineral oil slurries show that the potential for workability and low cost is present. However, slurries tested to date which had sufficient lubricity exhibited wafer breakage problems near the end of the run for as-yet unknown reasons. The first test of the large prototype saw under cutting force control was largely successful in that the controller worked perfectly. Unfortunately a technique error (excessive stroke shortening) caused blade breakage and low yield. The latest run of the large saw pointed up the fact that an indication of end-of-stoke vertical motion, or bounce, is necessary. A circuit to provide such indication was fabricated and installed. Preliminary tests show it to be excessively noise sensitive; therefore, work on grounding and shielding to reduce this sensitivity is in progress.

Fleming, J. R.↗

Initializing a flicker-noise generator

The behavior of the stationary process, y(s), resulting from a particular Barnes-Jarvis (1971) flicker-noise generator filter initialization is analyzed along with that of the usual output, y(p), and the results are compared to those derived from the theory of true nonstationary flicker noise. A computer simulation and theoretical analysis indicates that though y(s) and y(p) two-sample variances are almost the same, they have significantly different time-interval errors (TIE). As time increases, up to the useful life of the generator output, more and more of the y(s) TIE is found to be due to the transient part.

Greenhall, C. A.↗

NBC boil-off calorimeter for measuring thermal conductivity of insulating materials

Modern temperature, pressure and flow sensors along with a high speed digital control system have been incorporated into an existing thermal conductivity apparatus (ASTM C745). The system has also been modified to include the use of liquid helium as the refrigerant, if desired. The apparatus can be used to study thermal conductivity in the temperature range from 4 K to room temperature. Preliminary results on insulating materials indicate that the system update has significantly improved the precision and operational characteristics of the apparatus. Basic principles of operation, sources of system error and the reduction of system error by application of digital control and modern sensors are discussed. Preliminary data are presented.

Dube, W. P.↗

Measuring tropospheric HNO3 - Problems and prospects for Nylon filter and mist chamber techniques

A series of laboratory and field measurements was performed to evaluate the mist chamber technique for determining tropospheric HNO3 concentrations. Both the mist chamber and standard Nylon filter techniques exhibit high collection efficiency and excellent agreement measuring HNO3 vapors from a permeation source. When simultaneously sampling ambient air in eastern Virginia, the Nylon filter measured an average of 70 percent higher HNO3 concentration than the mist chamber technique. The results indicate that O3 causes a low-level positive artifact interference in HNO3 measurements performed with the filter technique. This O3-induced error is small, however, compared to the large difference between atmospheric HNO3 concentrations determined with the two techniques. It is hypothesized that unidentified (organic?) nitrogen species in the atmosphere react for form NO3(-) on the filter and this phenomenon may interfere with Nylon filter measurements of HNO3 vapor. These potential interferences did not appear to affect measurements of HNO3 with the mist chamber method.

Talbot, R. W.↗

In-situ radio-metric tracking to support navigation for interplanetary missions with multiple spacecraft

Doppler and ranging measurements between spacecraft can be obtained only when the ratio of the total received signal power to noise power density (P(sub t/N(sub 0)) at the receiving spacecraft is sufficiently large that reliable signal detection can be achieved within a reasonable time period. In this paper, the requirements on P(sub t)/N(sub 0) for reliable carrier signal detection is calculated as a function of various system parameters, including characteristics of the spacecraft computing hardware and a priori uncertainty in spacecraft-spacecraft relative velocity and acceleration. Also calculated is the P(sub t)/N(sub 0) requirement for relaible detection of a ranging signal, consistting of a carrier with pseudo-noise phase modulation. Once the P(sub t)/N(sub 0) requirement is determined, then for a given set of assumed spacecraft telecommunication characteristics (transmitted signal power, antenna gains, receiver noise temperatures) it is possible to calculate the maximum range at which a carrier signal or ranging signal may be acquired. A brief error covariance analysis has been conducted to illustrate the utility of in situ Doppler and ranging measurements for Mars approach navigation. The results indicate that navigation accuracies of a few kilometers can be achieved with either data type. The analysis also illustrates dependency of the achievable accuracy on the approach trajectory velocity.

Kahn, Robert D.↗

Report to TRMM

The effort involved three elements all related to the measurement of rain and clouds using microwaves: (1) Examine recently proposed techniques for measuring rainfall rate and rain water content using data from ground-based radars and the TRMM microwave link in order to develop improved ground validation and radar calibration techniques; (2) Develop dual-polarization, multiple frequency radar techniques for estimating rain water content and cloud water content to interpret the vertical profiles of radar reflectivity factors (Z) measured by the TRMM Precipitation Radar; and (3) Investigate theoretically and experimentally the potential biases in TRMM Z measurements due to spatial inhomogeneities in precipitation. The research succeeded in addressing all of these topics, resulting in several refereed publications. In addition, the research indicated that the effects of non-Rayleigh statistics resulting from the nature of the precipitation inhomogeneities will probably not result in serious errors for the TRMM radar measurements, but the TRMM radiometers may be subject to significant bias due to the inhomogeneities.

Jameson, Arthur R.↗

Report to TRMM

The effort involved three elements all related to the measurement of rain and clouds using microwaves: (1) Examine recently proposed techniques for measuring rainfall rate and rain water content using data from ground-based radars and the TRMM microwave link in order to develop improved ground validation and radar calibration techniques; (2) Develop dual-polarization, multiple frequency radar techniques for estimating rain water content and cloud water content to interpret the vertical profiles of radar reflectivity factors (Z) measured by the TRMM Precipitation Radar; and (3) Investigate theoretically and experimentally the potential biases in TRMM Z measurements due to spatial inhomogeneities in precipitation. The research succeeded in addressing all of these topics, resulting in several referred publications. addition, the research indicated that the effects of non-Rayleigh statistics resulting from the nature of the precipitation inhomogeneities will probably not result in serious errors for the TRMM radar Measurements, but the TRMM radiometers may be subject to significant bias due to the inhomogeneities.

Jameson, Arthur R.↗

Optical Channelizer Evaluation Using Empirical Data and Simulation

Westinghouse Electric Corporation Division under NASA contract NAS3-25865 developed a proof-of-concept (POC) multichannel demultiplexer implemented as an acousto-optic radiofrequency (RF) with a spectrum analyzer. A detailed analysis of the experimental results indicate that the expected degradation caused by the acousto-optical channelizer is approximately 2.0 dB degradation at 10(exp -5) bit-error rate (BER) and 3.0 dB degradation at 10(exp -8) BER. This degradation may be quite acceptable when considering the excellent volume, mass, and power characteristics of acousto-optical channelizing relative to other technologies. In addition, system performance can be greatly improved by using digital pulse shaping in the modem and increasing the channel spacing from 40 to 45 kHz for 64 kbps quadrature phase-shift keying (QPSK) modulation.

Ivancic,William D.↗

IAUC 6530: GRO J1744-28; C/1995 01

We have recorded a series of outbursts starting on 1996 Dec. 2 that are consistent with the position of GRO J1744-28, the bursting pulsar. The bursts are detected between 20 and 100 keV, and on Dec. 2 they came in variable rates ranging from every 300 to every 500 s, with a preliminary total number estimated between 80 and 1 00 events. After Dec. 3, the burst rate dropped to 15-20 bursts/day, where it has remained. The current average error radius of the burst locations is about 4 deg. The burst fluence is currently about 2 x 10E-7 erg cmE-2. This indicates that the source is in outburst again. Although the source location is currently very close to the sun, we encourage observations in other wavelengths whenever possible. Persistent, hard x-ray emission from GRO J1744-28 (IAUC 6272, 6284, 6285) is currently being detected through both pulsation and earth occultation. Pulsations with a period near 0.467 s became detectable on Dec. 17, rising to a 20- to 40-keV-rms-pulsed flux of 1.3(1) x 10E-9 erg cmE-1 sE-1 (170 mCrab) by 1997 Jan. 3. On Jan. 1.0, the intrinsic pulse frequency was 2.1408983(4) Hz, and the spin-up rate was 2.8(5) x l0E-12 HzsE-1. This assumes the following circular orbit parameters: P = 11.83665(14) days; epoch of longitude 90 deg = JD 2450126.9977(4) TDB; a sin i = 2.6371(5) light-s (determined using data from the 1995 Dec.-l996 Apr. outburst). Earth-occultation monitoring of flux from GRO J1744-28 shows its intensity increasing by a factor of about two during 1996 Dec. 25-1997 Jan. 6. Although source confusion prevents a precise flux estimate, subtracting a 25-percent background for unresolved galactic-center sources yields a persistent flux for Jan. 3-6 in the energy bands 20-30, 30-40, and 40-50 keV of 590, 470, and 290 mcrab, respectively."

Kouveliotou, Chryssa↗

Fluid and Electrolyte Nutrition

Studies of fluid and electrolyte homeostasis have been completed since the early human space flight programs, with comprehensive research completed on the Spacelab Life Sciences missions SLS-1 and SLS-2 flights, and more recently on the Mir 18 mission. This work documented the known shifts in fluids, the decrease in total blood volume, and indications of reduced thirst. Data from these flights was used to evaluate the nutritional needs for water, sodium, and potassium. Interpretations of the data are confounded by the inadequate energy intakes routinely observed during space flight. This in turn results in reduced fluid intake, as food provides approximately 70% water intake. Subsequently, body weight, lean body mass, total body water, and total body potassium may decrease. Given these issues, there is evidence to support a minimum required water intake of 2 L per day. Data from previous Shuttle flights indicated that water intake is 2285 +/- 715 ml/day (mean +/- SD, n=26). There are no indications that sodium intake or homeostasis is compromised during space flight. The normal or low aldosterone and urinary sodium levels suggest adequate sodium intake (4047 +/- 902 mg/day, n=26). Because excessive sodium intake is associated with hypercalciuria, the recommended maximum amount of sodium intake during flight is 3500 mg/day (i.e., similar to the Recommended Dietary Allowance, RDA). Potassium metabolism appears to be more complex. Data indicate loss of body potassium related to muscle atrophy and low dietary intake (2407 +/- 548 mg/day, n=26). Although possibly related to measurement error, the elevations in blood potassium suggest alterations in potassium homeostasis. The space RDA for minimum potassium intake is 3500 mg/day. With the documented inadequate intakes, efforts are being made to increase dietary consumption of potassium.

Lane, Helen W.↗

The Smoke-Trail Method for Obtaining Detailed Measurements of the Vertical Wind Profile for Application to Missile-Dynamic-Response Problems

Detailed measurements of the vertical profile of the wind are urgently needed f o r studies of the response of rising missiles, but conventional wind-measuring systems cannot provide the accuracy and detail required over the necessary range of altitudes. A method is presented for obtaining a detailed, accurate profile over a large altitude range. The method utilizes photogrammetric measurement of successive positions of the t rail of an ascending rocket. Construction of a rocketborne smoke generator is discussed and the photography, film reading, and data-reduction procedures are described. The accuracy of the method i s examined and error equations are derived. Finally, some examples of wind profiles measured by this method are shown, and their implications for missile response are indicated.

Henry, Robert M.↗

Characterization and detection of Anopheles vestitipennis and Anopheles punctimacula (Diptera: Culicidae) larval habitats in Belize with field survey and SPOT satellite imagery

Surveys of larval habitats of Anopheles vestitipennis and Anopheles punctimacula were conducted in Belize, Central America. Habitat analysis and classification resulted in delineation of eight habitat types defined by dominant life forms and hydrology. Percent cover of tall dense macrophytes, shrubs, open water, and pH were significantly different between sites with and without An. vestitipennis. For An. punctimacula, percent cover of tall dense macrophytes, trees, detritus, open water, and water depth were significantly different between larvae positive and negative sites. The discriminant function for An. vestitipennis correctly predicted the presence of larvae in 65% of sites and correctly predicted the absence of larvae in 88% of sites. The discriminant function for An. punctimacula correctly predicted 81% of sites for the presence of larvae and 45% for the absence of larvae. Canonical discriminant analysis of the three groups of habitats (An. vestitipennis positive; An. punctimacula positive; all negative) confirmed that while larval habitats of An. punctimacula are clustered in the tree dominated area, larval habitats of An. vestitipennis were found in both tree dominated and tall dense macrophyte dominated environments. The forest larval habitats of An. vestitipennis and An. punctimacula seem to be randomly distributed among different forest types. Both species tend to occur in denser forests with more detritus, shallower water, and slightly higher pH. Classification of dry season (February) SPOT multispectral satellite imagery produced 10 land cover types with the swamp forest and tall dense marsh classes being of particular interest. The accuracy assessment showed that commission errors for the tall, dense marsh and swamp forest appeared to be minor; but omission errors were significant, especially for the swamp forest (perhaps because no swamp forests are flooded in February). This means that where the classification indicates there are An. vestitipennis breeding sites, they probably do exist; but breeding sites in many locations are not identified and could be more abundant than indicated.

NASA Discipline General Space Life Sciences↗

Neural network uncertainty assessment using Bayesian statistics: a remote sensing application

Neural network (NN) techniques have proved successful for many regression problems, in particular for remote sensing; however, uncertainty estimates are rarely provided. In this article, a Bayesian technique to evaluate uncertainties of the NN parameters (i.e., synaptic weights) is first presented. In contrast to more traditional approaches based on point estimation of the NN weights, we assess uncertainties on such estimates to monitor the robustness of the NN model. These theoretical developments are illustrated by applying them to the problem of retrieving surface skin temperature, microwave surface emissivities, and integrated water vapor content from a combined analysis of satellite microwave and infrared observations over land. The weight uncertainty estimates are then used to compute analytically the uncertainties in the network outputs (i.e., error bars and correlation structure of these errors). Such quantities are very important for evaluating any application of an NN model. The uncertainties on the NN Jacobians are then considered in the third part of this article. Used for regression fitting, NN models can be used effectively to represent highly nonlinear, multivariate functions. In this situation, most emphasis is put on estimating the output errors, but almost no attention has been given to errors associated with the internal structure of the regression model. The complex structure of dependency inside the NN is the essence of the model, and assessing its quality, coherency, and physical character makes all the difference between a blackbox model with small output errors and a reliable, robust, and physically coherent model. Such dependency structures are described to the first order by the NN Jacobians: they indicate the sensitivity of one output with respect to the inputs of the model for given input data. We use a Monte Carlo integration procedure to estimate the robustness of the NN Jacobians. A regularization strategy based on principal component analysis is proposed to suppress the multicollinearities in order to make these Jacobians robust and physically meaningful.

Neural Networks (Computer)↗