SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A revised version of expert knowledge for the onboard navigation (ONAV) entry system is given. Included is some brief background information together with information describing the knowledge that the system does contain.
The forced transition due to the application of large disturbances in the entry region of a pipe flow is considered. The disturbances are not large enough to cause a puff-type transition which is peculiar to a pipe low; they cause a slug-type transition which is akin to a flate turbulence spot. The perturbation amplifications with Reynolds number have been measured at the entrance and also soon after the mean turbulent flow has become fully developed. At the entrance, all dominant frequencies amplify in a nearly universal manner which is exponential in part of the Reynolds number range. Further-more, the nonlinear process undergoes a change at Reynolds numbers of 4930 to 6020, and again at 8120 to 10060. At the downstream station, an almost saturated amplification rate has been reached and, in the background of a higher turbulence level, the trend is qualitatively similar to that in peak-valley splitting.
The direct simulation Monte Carlo (DSMC) method has been used to calculate the molecular velocity and energy distributions of molecules striking a surface after traversing a shock layer in hypersonic transitional flow. The calculations were performed for a 1.6-m-diameter sphere at a nominal velocity for re-entry of 7.5 km/s over an altitude range of 130 to 90 km. Real gas effects and chemical reactions were included in the DSMC simulations. Results are presented for these conditions and the need for gas-surface interaction experiments is discussed.
Visual optical-electronic display for encoding and measurement (VODEM) is system of computer data-entry and display equipment and associated software. Designed to reduce significantly rate of errors in text or other data entered manually or by optical character-recognition equipment and eases task of proofreading those data. Accuracy increased and stress reduced. Provides head-on display including two texts or sets of data to be compared. Developed in large-screen and small-screen version differing mainly in display equipment. Large-screen version includes cathode-ray-tube video display; small-screen version includes smaller liquid-crystal display mounted on computer-controlled x-y drive.
The Direct Simulation Monte Carlo method of Bird is used to investigate the characteristics of low density hypersonic flowfields for typical aerobrakes during Martian atmospheric entry. The method allows for both thermal and chemical nonequilibrium. Results are presented for a sixty-degree spherically blunt cone for various nose radii and altitudes.
An algebraic solution adaptive grid generation method that allows adapting the grid in all three coordinate directions is presented. Techniques are described that maintain the integrity of the original vehicle definition for grid point movement on the vehicle surface and that avoid grid cross over in the boundary layer portion of the grid lying next to the vehicle surface. The adaptive method is tested by computing the Mach 6 hypersonic three dimensional viscous flow about a proposed Martian entry vehicle.
Results of the OEX program are summarized with emphasis on the information on entry aerothermodynamic phenomena derived from Space Shuttle operations. The discussion focuses on OEX experiment complement and operational history, freestream environment and vehicle attitude data, aerodynamic force and moment data, aerodynamic surface data, and vehicle configuration data. Attention is also given to orbiter aerodynamic performance, stability and control, high-altitude atmospheric density variability, direct simulation Monte Carlo validation, orbital drag variation, and computational fluid dynamic technique validation.
The viewgraphs of a discussion on ATL Products Division's entries into the computer mass storage marketplace presented at the National Space Science Data Center (NSSDC) Mass Storage Workshop is included. Topics covered are product evolution including robotics; aperture storage module library; Broadcast Division's TCS2000 Video Cart and TCS90 Videocart System; high density systems business product lines; and storage and library management.
The launch and entry suit (LES) is a life support suit worn during Orbiter ascent and descent. The impact of suit weight and restricted mobility on egress from the Orbiter during an emergency is unknown. An alternate suit - the advanced crew escape suite (ACES) - is being evaluated. The physiological responses to ambulatory exercise of six subjects wearing the LES and ACES were measured and compared to those measurements taken while unsuited. Dependent variables included heart rate and metabolic response to treadmill walking at 5.6 km/h (3.5 mph), and also bilateral concentric muscle strength about the knee, shoulder, and elbow. No significant (p greater than 0.06) differences in heart rate or metabolic variables were measured in either suit while walking at 5.6 km/h. Significant (p less than 0.05) decreases in all metabolic variables were remarked when both suits were compared to the unsuited condition. There were no significant (p greater than 0.05) differences among the three suit conditions at 30 or 180 deg/s for muscles about the elbow and knee; however, about the shoulder, a significant (p = 0.0215) difference between the ACES and the unsuited condition was noted. Therefore, wearing a life support suit while performing Orbiter egress imposes a significant metabolic demand on crewmembers. Selective upper body strength movements may be compromised.
As general findings, lessons learned from shuttle are: (1) bridge established between development center (JSC) Research Centers (ARC, LARC), and industry (RI, LMSC, Corning, Mansville, 3M LTV, Union Carbide, Hexcel) for shuttle TPS; (2) not all test results adequately analyzed or in hindsight, completely encompassing all failure modes; (3) gap heating effects from ground facilities not totally indicative of flight experience; (4) need to design with operations in mind (not just to cost) example: moisture intrusion of GR/EP, many other examples; (5) RSI- developed as point design for maneuvering entry vehicle of high L/D; and (6) RSI - 15 years from invention to use on flight hardware.
A unit that allows text entry with only one hand has been developed, and holds the promise of allowing computers to be truly portable. It is unique in that it allows operation in any position, freeing the user from the traditional constraints of having to be seated near a desk. This hand held, chord-key-based unit can be used either autonomously for idea capturing, or tethered to a personal computer and used as an auxiliary keyboard. Astronauts, journalists, the bedridden, and anyone else normally barred from using a computer while on the job could also benefit from this form of man-machine interface, which has been dubbed the 'Data Egg'.
The Task Analysis of Shuttle Entry and Landing (E/L) Activities documents all tasks required to land the Orbiter following an STS mission. In addition to analysis of tasks performed, task conditions are described, including estimated time for completion, altitude, relative velocity, normal and lateral acceleration, location of controls operated or monitored, and level of g's experienced. This analysis precedes further investigations into potential effects of zero g on piloting capabilities for landing the Orbiter following long-duration missions. This includes, but is not limited to, researching the effects of extended duration missions on piloting capabilities. Four primary constraints of the analysis must be clarified: (1) the analysis depicts E/L in a static manner--the actual process is dynamic; (2) the task analysis was limited to a paper analysis, since it was not feasible to conduct research in the actual setting (i.e., observing or filming duration an actual E/L); (3) the tasks included are those required for E/L during nominal, daylight conditions; and (4) certain E/L tasks will vary according to the flying style of each commander.
Returning space crews to Earth in a recumbent position requires the design of a new seating system. Current anthropometric data are based on measurements taken while the subjects were unsuited and sitting. To be most accurate, it is necessary to design by measurements of subjects in the launch and entry suit in a recumbent position. Since the design of the recumbent seating system must meet the requirements of both 5th percentile Japanese female and 95th percentile American male crew members, a delta is reported rather than absolute measurements of the test subjects. This delta is the difference in the measurements taken with the subjects unsuited and sitting and those taken with the subjects suited and recumbent. This delta, representative of the change due to the suit, can be added to the existing Man-Systems Integration Standards (NASA-STD-3000) anthropometric data to project the measurements for 5th percentile Japanese female and 95th percentile American male crew members. A delta accounting for the spinal elongation caused by prolonged exposures to microgravity is added as well. Both unpressurized and pressurized suit conditions are considered. Background information, the test protocol and procedure, analysis of the data, and recommendations are reported.
The Shuttle entry guidance concept is reviewed which is aimed at tracking a reference drag trajectory that leads to the specified range and velocity for the initiation of the terminal energy management phase. An approximate method of constructing the domain of attraction is proposed, and its validity is ascertained by simulation. An alternative guidance law yielding global exponential tracking in the absence of control saturation is derived using a feedback linearization method. It is noted that the alternative guidance law does not improve on the stability and performance of the current guidance law, for the operating domain and control capability of the Shuttle. It is suggested that the new guidance law with a larger operating domain and increased lift-to-drag capability would be superior.
The SEADS pressure data obtained from the Shuttle flight 61-C are analyzed in conjunction with the preflight database. Based on wind tunnel data, the sensitivity of the Shuttle Orbiter stagnation region pressure distribution to angle of attack and Mach number is demonstrated. Comparisons are made between flight and wind tunnel SEADS orifice pressure distributions at several points throughout the re-entry. It is concluded that modified Newtonian theory provides a good tool for the design of a flush air data system, furnishing data for determining orifice locations and transducer sizing. Ground-based wind tunnel facilities are capable of providing the correction factors necessary for the derivation of accurate air data parameters from pressure data.
A quantification has been conducted of any existing differences between the performance, in operational conditions, of the Space Shuttle crew Launch Entry Suit (LES) and the new Advanced Crew Escape Suit (ACES). While LES is a partial-pressure suit, the ACES system which is being considered as a replacement for LES is a full-pressure suit. Three tests have been conducted with six subjects to ascertain the suits' reach envelope, strength, and treadmill performance. No significant operational differences were found between the two suit designs.
A 1D boundary-layer model of Mars based on a momentum equation that describes friction, pressure gradient, and Coriolis forces is presented. Frictional forces and convective heating are computed using the level-2 turbulence closure theory of Mellor and Yamada (1974). The model takes into account the radiative effects of CO2 gas and suspended dust particles. Both radiation and convection depend on surface temperatures which are computed from a surface heat budget. Model predictions are compared with available observations from Viking landers. It is concluded that, in general, the model reproduces the basic features of the temperature data. The agreement is particularly good at entry time for the V L-2 site, where the model and observations are within several degrees at all levels for which data are available.
A multiblock, laminar heating analysis for the shuttle orbiter at three trajectory points ranging from Mach 24.3 to Mach 12.86 on re-entry is described. The analysis is performed using the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) with both a seven species chemical nonequilibrium model and an equilibrium model. A finite-catalytic-wall model appropriate for shuttle tiles at a radiative equilibrium wall temperature is applied. Computed heating levels are generally in good agreement with the flight data though a few rather large discrepancies remain unexplained. The multiblock relaxation strategy partitions the flowfield into manageable blocks requiring a fraction of the computational resources (time and memory) required by a full domain approach. In hot, the computational cost for a solution at even a single trajectory point would be prohibitively expensive at the given resolution without the multiblock approach. Converged blocks are reassembled to enable a fully coupled converged solution over the entire vehicle, starting from a nearly converged initial condition.