Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

First-principles investigation of near-field energy transfer between localized quantum emitters in solids

We present a predictive and general approach to investigate near-field energy transfer processes between localized defects in semiconductors, which couples first-principles electronic structure calculations and a nonrelativistic quantum electrodynamics description of photons in the weak-coupling regime. The approach is general and can be readily applied to investigate broad classes of defects in solids. We apply our approach to investigate an exemplar point defect in an oxide, the F center in MgO, and we show that the energy transfer from a magnetic source, e.g., a rare-earth impurity, to the vacancy can lead to spin nonconserving long-lived excitations that are dominant processes in the near field, at distances relevant to the design of photonic devices and ultrahigh dense memories. We also define a descriptor for coherent energy transfer to predict geometrical configurations of emitters to enable long-lived excitations, that are useful to design optical memories in semiconductor and insulators. Published by the American Physical Society 2024

Chattaraj, Swarnabha (ORCID:0000000329333581)↗

Observing ion diffusion and reciprocating hopping motion in water

When an ionic crystal dissolves in solvent, the positive and negative ions associated with solvent molecules release from the crystal. However, the existing form, interaction, and dynamics of ions in real solution are poorly understood because of the substantial experimental challenge. We observed the diffusion and aggregation of polyoxometalate (POM) ions in water by using liquid phase transmission electron microscopy. Real-time observation reveals an unexpected local reciprocating hopping motion of the ions in water, which may be caused by the short-range polymerized bridge of water molecules. We find that ion oligomers, existing as highly active clusters, undergo frequent splitting, aggregation, and rearrangement in dilute solution. The formation and dissociation of ion oligomers indicate a weak counterion-mediated interaction. Furthermore, POM ions with tetrahedral geometry show directional interaction compared with spherical ions, which presents structure-dependent dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of coagulation factor VIII bound to a patient-derived anti-C1 domain antibody inhibitor

The development of pathogenic antibody inhibitors against coagulation factor VIII (FVIII) occurs in ~30% of congenital hemophilia A patients receiving FVIII replacement therapy as well as in all cases of acquired hemophilia A. KM33 is an anti-C1 domain antibody inhibitor previously isolated from a severe hemophilia A patient. In addition to potently blocking FVIII binding to von Willebrand factor and phospholipid surfaces, KM33 disrupts FVIII binding to lipoprotein receptor-related protein 1 (LRP1), which drives FVIII hepatic clearance and antigen presentation in dendritic cells. Here, we report on the structure of FVIII bound to NB33, a recombinant derivative of KM33, by single-particle cryo-electron microscopy. Furthermore, structural analysis reveals the NB33 epitope localizes to FVIII residues R2090-S2094 and I2158-R2159 which constitute membrane-binding loops in the C1 domain. Further analysis reveals multiple FVIII lysine and arginine residues, previously shown to mediate binding to LRP1, dock onto an acidic cleft at the NB33 variable domain interface, thus blocking a putative LRP1 binding site. Together, these results demonstrate a novel mechanism of FVIII inhibition by a patient-derived antibody inhibitor and provide structural evidence toward engineering FVIII with reduced LRP1-mediated clearance.

59 BASIC BIOLOGICAL SCIENCES↗

Injun 5 observations of magnetospheric electric fields and plasma convection.

Recent measurements of magnetospheric electric fields with the satellite Injun 5 have provided a comprehensive global survey of plasma convection at low altitudes in the magnetosphere. A persistent feature of these electric-field observations is the occurrence of an abrupt reversal in the convection electric field at auroral-zone latitudes. The plasma convection velocities associated with these reversals are generally directed E-W, away from the sun on the poleward side of the reversal, and toward the sun on the equatorward side of the reversal. Convection velocities over the polar cap region are normally less than those observed near the reversal region. The electric-field reversal is observed to be coincident with the 'trapping boundary' for electrons with energies E greater than 45 keV. Near local noon the region of anti-sunward convection poleward of the electric-field reversal/trapping boundary corresponds to the low-altitude extension of the polar-cusp plasma.

Gurnett, D. A.↗

Plasma waves in the dayside polar cusp. II - Magnetopause and polar magnetosheath

During the outbound pass of Nov. 1, 1968, Ogo 5 sporadically encountered the low-altitude polar cusp at low magnetic latitudes. The spacecraft remained in the cusp beyond six earth radii, and it then traversed the interface region between the magnetospheric cusp and the magnetosheath. Two large scale discontinuities were detected in this sheath-cusp transition region, and several possible interpretations are evaluated here. At 1427 UT, local changes in magnetic field orientation and the variation in ULF magnetic power spectral density were typical of shifts detected at the magnetopause, although the spacecraft did not traverse a true boundary of warm plasma at this point. The second discontinuity, detected at 1456 UT, resembled a collisionless shock, and it was characterized by observations of intense, impulsive VLF electric field bursts and rapid local variations in both total ion flux and differential electron flux. The simplest interpretation is that Ogo 5 had traversed a standing shock within the sheath.

Scarf, F. L.↗

Proportional counter for X-ray analysis of lunar and planetary surfaces

A position sensitive proportional scintillation detector was developed and evaluated for use in applications involving X-ray imaging as well as spectroscopy. Topics covered include limitations of the proportional scintillation counter for use in space; purification of the xenon gas in the detector, and the operation of the detector system. Results show that the light signal in a proportional scintillation detector remains well localized. With modest electric fields in xenon, the primary electrons from a photoelectric absorption of an X-ray can be brought a distance of a few millimeters to a higher field region without spreading more than a millimeter or so. Therefore, it is possible to make a proportional scintillation detector with good position sensitivity that could be used to calibrate out the difference in light collection over its sensitive volume.

Source record↗

Differential spacecraft charging on the geostationary operational environmental satellites

Subsystems aboard the Geostationary Operational Environmental Satellites 4 and 5 showed instances of anomalous changes in state corresponding to false commands. Evidence linking the anomalous changes to geomagnetic activity, and presumably static discharges generated by spacecraft differential charging induced by substorm particle injection events is presented. The anomalies are shown to be correlated with individual substorms as monitored by stations of the North American Magnetometer Chain. The relative frequency of the anomalies is shown to be a function of geomagnetic activity. Finally a least squares fit to the time delay between substorm initiation and spacecraft anomaly as a function of spacecraft local time is shown to be consistent with injected electron populations with energy in the range 10 keV to 15 keV, in agreement with present understanding of the spacecraft charging mechanism. The spacecraft elements responsible for the differential charging were not satisfactorily identified. That question is currently under investigation.

Farthing, W. H.↗

Radio blips and hard X-rays in solar flares

The properties of short, narrow-band spikes occurring in groups at decimetric wavelengths have been extensively analyzed. The bursts, termed blips in the literature, have been found to appear in the impulsive phase of flares. They are associated with hard X-ray emission in 40 percent of all cases with simultaneous coverage. The correspondence between blips and X-ray spikes is generally not one-to-one, blips being more numerous than X-ray spikes. In some cases, however, close correlations between single events have been found. Blips have been discovered to drift in frequency and to decay in time similarly to type III bursts at lower frequency. They also resemble type III bursts in polarization. An analysis of starting frequencies, however, clearly shows that blips and type III bursts belong to different statistical populations. The narrow bandwidth of blips, the major qualitative difference with respect to type III bursts, suggests that blips are the signature of electron beams which either decay rapidly or have a locally enhanced emission due to the presence of some low-frequency wave. Blips have been shown to be an impulsive phase phenomenon occurring at densities of one to three billion per cu cm in the low corona.

Benz, A. O.↗

Calculated nighttime eastward plasma drift velocities at low latitudes and their solar cycle dependence

After calculating ambient electron densities as a function of altitude, latitude and local time, a simplified expression is used to calculate F-region eastward plasma drifts given a zonal neutral wind model. The derived eastward plasma drift on a magnetic flux tube is examined as a function of the flux tube apex height. If the neutral wind is assumed to be independent of latitude the plasma drift maximizes along the flux tube which intercepts the F-region peak concentration at the Appleton anomaly. Above this altitude the velocity decreases to reflect a decrease in the flux tube integrated F-region Pedersen conductivity. For a latitude dependent wind the plasma drift tends to maximize along the flux tube which intercepts the F-peak at the dip equator. Above this altitude the drift decreases to reflect the latitude distribution of the wind.

Anderson, D. N.↗

Electronically Variable Pressure Regulator (EVPR)

A new programmable electronically variable pressure regulator (EVPR) concept accurately controls the local outlet or remote system pressure. It uses an integral pulse width modulated rare earth permanent magnet motor operating in response to redundant pressure transducer feedback signals. The EVPR is a simple single stage device that does not use dynamic seals or pilot valving. Conversion of partial revolution motor torque to poppet lifting force is accomplished by pure flexure action to avoid using bearings. The flexure drive (called the ROTAX) has a variable lead to minimize motor weight and power consumption. Breadboard tests were completed successfully on two critical design elements of the EVPR: the ROTAX and the motor. The ROTAX cable system was tested for 250,000 cycles without failure. The breadboard motor met the basic design requirements including the design torque and power consumption. Prototype parts were fabricated, and testing of the prototype EVPR has started. It is PC computer controlled to facilitate programming, data acquisition and analysis. A lightweight dedicated microprocessor is planned for the flightweight EVPR.

Reinicke, R. H.↗

Ion acceleration at the contact surface of Comet P/Halley

Suprathermal ions form a major component of the plasma within the inner coma of Comet P/Halley. A close inspection of these ions shows them to contain at least two separate populations: one population covers the energy range below about 400 eV, and a second population exists in a narrow energy band centered between 3 and 4 keV. Similar distributions are found in two regions upstream of the contact surface. It is postulated that the suprathermal ions observed upstream of the contact surface were created at the contact surface. Sudden movements of the contact surface, in the cometary frame of reference, in response to changes in the magnetic field pressure, or cometary production rate, give rise to an induction electric field able to accelerate the local thermal cometary ions up into the tens of electron volts range. Higher energies can be attained with the reacceleration of these ions in subsequent movements of the contact surface. Besides creating the ion enhancements observed upstream of the contact surface, this acceleration mechanism wil release large amounts of suprathermal ions into the inner coma.

Gurgiolo, C.↗

Hydrogen effects on low-cycle fatigue of the single-crystal nickel-base superalloy CMSX-2

The effects of hydrogen on the low-cycle fatigue behavior of CMSX-2 (001)-oriented single crystals were examined. Fatigue tests were conducted under constant plastic strain amplitude control. Cyclic stress-strain curves and fatigue life data at different plastic strain amplitudes were determined for hydrogen-free and hydrogen-charged specimens. Two charging procedures, leading to different hydrogen concentrations, were applied. Hydrogen was found to decrease significantly the number of cycles to failure under the various experimental conditions. The increasing hydrogen concentration and ratio of the hydrogen to nonhydrogen-containing volume were found to shorten fatigue life in hydrogen-charged specimens. Based on the analysis of cyclic stress-strain curves and optical and transmission electron microscopy, it was established that hydrogen enhanced strain localization and promoted crystallographic stage I cracking, leading to embrittlement.

Dollar, M.↗

Helicopter Human Factors

Even under optimal conditions, helicopter flight is a most demanding form of human-machine interaction, imposing continuous manual, visual, communications, and mental demands on pilots. It is made even more challenging by small margins for error created by the close proximity of terrain in NOE flight and missions flown at night and in low visibility. Although technology advances have satisfied some current and proposed requirements, hardware solutions alone are not sufficient to ensure acceptable system performance and pilot workload. However, human factors data needed to improve the design and use of helicopters lag behind advances in sensor, display, and control technology. Thus, it is difficult for designers to consider human capabilities and limitations when making design decisions. This results in costly accidents, design mistakes, unrealistic mission requirements, excessive training costs, and challenge human adaptability. NASA, in collaboration with DOD, industry, and academia, has initiated a program of research to develop scientific data bases and design principles to improve the pilot/vehicle interface, optimize training time and cost, and maintain pilot workload and system performance at an acceptable level. Work performed at Ames, and by other research laboratories, will be reviewed to summarize the most critical helicopter human factors problems and the results of research that has been performed to: (1) Quantify/model pilots use of visual cues for vehicle control; (2) Improve pilots' performance with helmet displays of thermal imagery and night vision goggles for situation awareness and vehicle control; (3) Model the processes by which pilots encode maps and compare them to the visual scene to develop perceptually and cognitively compatible electronic map formats; (4) Evaluate the use of spatially localized auditory displays for geographical orientation, target localization, radio frequency separation; (5) Develop and flight test control/display concepts; (6) Quantify, model, predict, and improve pilots, workload-management strategies; and (7) Design computer-game trainers to reduce training time and cost.

Hart, Sandra G.↗

Designs and Materials for Better Coronagraph Occulting Masks

New designs, and materials appropriate for such designs, are under investigation in an effort to develop coronagraph occulting masks having broad-band spectral characteristics superior to those currently employed. These designs and materials are applicable to all coronagraphs, both ground-based and spaceborne. This effort also offers potential benefits for the development of other optical masks and filters that are required (1) for precisely tailored spatial transmission profiles, (2) to be characterized by optical-density neutrality and phase neutrality (that is, to be characterized by constant optical density and constant phase over broad wavelength ranges), and/or (3) not to exhibit optical- density-dependent phase shifts. The need for this effort arises for the following reasons: Coronagraph occulting masks are required to impose, on beams of light transmitted through them, extremely precise control of amplitude and phase according to carefully designed transmission profiles. In the original application that gave rise to this effort, the concern has been to develop broad-band occulting masks for NASA s Terrestrial Planet Finder coronagraph. Until now, experimental samples of these masks have been made from high-energy-beam-sensitive (HEBS) glass, which becomes locally dark where irradiated with a high-energy electron beam, the amount of darkening depending on the electron-beam energy and dose. Precise mask profiles have been written on HEBS glass blanks by use of electron beams, and the masks have performed satisfactorily in monochromatic light. However, the optical-density and phase profiles of the HEBS masks vary significantly with wavelength; consequently, the HEBS masks perform unsatisfactorily in broad-band light. The key properties of materials to be used in coronagraph occulting masks are their extinction coefficients, their indices of refraction, and the variations of these parameters with wavelength. The effort thus far has included theoretical predictions of performances of masks that would be made from alternative materials chosen because the wavelength dependences of their extinction coefficients and their indices of refraction are such that that the optical-density and phase profiles of masks made from these materials can be expected to vary much less with wavelength than do those of masks made from HEBS glass. The alternative materials considered thus far include some elemental metals such as Pt and Ni, metal alloys such as Inconel, metal nitrides such as TiN, and dielectrics such as SiO2. A mask as now envisioned would include thin metal and dielectric films having stepped or smoothly varying thicknesses (see figure). The thicknesses would be chosen, taking account of the indices of refraction and extinction coefficients, to obtain an acceptably close approximation of the desired spatial transmittance profile with a flat phase profile

Balasubramanian, Kunjithapatham↗

New Results on High Energy Cosmic Ray Electrons Observed with Fermi LAT and Their Implications on the Origin of Cosmic Rays

The Large Area Telescope on-board the Fermi Gamma-Ray Space Telescope has collected more than 10 million cosmic ray electrons with energy above 7 GeV since its science operation on orbit. High energy electrons rapidly lose their energy by synchrotron radiation on Galactic magnetic fields and by inverse Compton scattering on the interstellar radiation field. The typical distance over which a 1 TeV electron loses half its total energy is estimated to be 300-400 pc.This makes them a unique tool for probing nearby Galactic space. Observed spectrum has a harder spectral index than was previously reported and suggests the presence of nearby sources of high energy electrons. One of viable candidates are nearby pulsars, possibly some of recently discovered by Fermi. At the same time the dark matter origin of such sources cannot be ruled out. I will also report our current upper limits on cosmic ray electrons anisotropy which helps to set constraints on their local sources.

Moiseev, Alexander↗

Investigating the Response and Expansion of Plasma Plumes in a Mesosonic Plasma Using the Situational Awareness Sensor Suite for the ISS (SASSI)

To study the complex interactions between the space environment surrounding the International Space Station (ISS) and the ISS space vehicle, we are exploring a specialized suite of plasma sensors, manipulated by the Space Station Remote Manipulator System (SSRMS) to probe the near‐ISS mesosonic plasma ionosphere moving past the ISS. It is proposed that SASSI consists of the NASA Marshall Space Flight Center's (MSFC's) Thermal Ion Capped Hemispherical Spectrometer (TICHS), Thermal Electron Capped Hemispherical Spectrometer (TECHS), Charge Analyzer Responsive to Local Oscillations (CARLO), the Collimated PhotoElectron Gun (CPEG), and the University of Michigan Advanced Langmuir Probe (ALP). There are multiple expected applications for SASSI. Here, we will discuss the study of fundamental plasma physics questions associated with how an emitted plasma plume (such as from the ISS Plasma Contactor Unit (PCU)) responds and expands in a mesosonic magnetoplasma as well as emit and collect current. The ISS PCU Xe plasma plume drifts through the ionosphere and across the Earth's magnetic field, resulting in complex dynamics. This is of practical and theoretical interest pertaining to contamination concerns (e.g. energetic ion scattering) and the ability to collect and emit current between the spacecraft and the ambient plasma ionosphere. This impacts, for example, predictions of electrodynamic tether current performance using plasma contactors as well as decisions about placing high‐energy electric propulsion thrusters on ISS. We will discuss the required measurements and connection to proposed instruments for this study.

Gilchrist, Brian E.↗

Predicting critical heat flux using localized sensing at invisible vapor-liquid interfaces

Predicting critical heat flux (CHF) in two-phase electronics cooling systems remains a significant challenge due to the sudden onset of boiling crisis and the difficulty in directly visualizing vapor-liquid interfaces. Existing sensing methods rely on lagging temperature measurements, optically accessible systems, or spatially averaged signals that cannot pinpoint CHF initiation at localized high-heat-flux regions. Here, we report a planar capacitive sensing approach that enables real-time, localized detection of vapor-liquid interface dynamics for CHF prediction in boiling heat transfer. The capacitive sensor exploits the dielectric constant difference between liquid and vapor phases to capture bubble nucleation, growth, and departure dynamics with a temporal resolution down to 2 ms. The capacitive sensing reveals distinct signals across boiling regimes: from high-frequency fluctuations during strong nucleate boiling to low-frequency fluctuations with increased amplitudes when approaching CHF. The multi-sensor array experiments demonstrate real-time localized sensing, where each sensor responds exclusively to boiling in its immediate vicinity without crosstalk from neighboring regions. This non-intrusive sensing approach provides predictive rather than lagging sensing signals of CHF occurrence, offering predictive diagnosis of two-phase liquid cooling for the thermal management of high-power-density electronics.

CHF↗

From photosynthetic electron flow to gene regulation: redox signal transduction in cyanobacteria

In cyanobacteria, the free-living ancestors of chloroplasts, photosynthesis simultaneously sustains growth and generates reactive oxygen species (ROS) that damage proteins, lipids, and DNA when light capture outpaces carbon fixation. Maintaining redox balance, therefore, requires cells to read photosynthetic electron flow as a signal that continuously tunes gene expression and protein activity. This review traces how these redox signals are transduced to transcription machinery through three routes: membrane-localized sensors, cytoplasmic redox sensors downstream of photosystem I, and ROS generated when electron sinks are saturated. Membrane-bound histidine kinases (two-component systems) relay the redox state of the plastoquinone pool to control photosystem remodeling, pigment biosynthesis, and circadian timing. Cytoplasmic one-component regulators, by contrast, sense redox directly through thiol-disulfide switches, glutathionylation, iron-sulfur clusters, and metal-catalyzed oxidation to control photosystem-cofactor, electron-carrier, and transition-metal homeostasis. Because many of these regulators persist in algal and plant chloroplasts, cyanobacteria illuminate principles of redox control across photosynthetic eukaryotes. Post-transcriptional and translational control further shapes redox-dependent gene expression programs through transcript stability, ribosome assembly, and translation initiation, extending redox regulation beyond transcription to every step of protein synthesis and even activity modulation. Finally, we connect redox regulation to photosynthetic physiology, stress resilience, and the rational engineering of cyanobacteria for sustainable bioproduction.

59 BASIC BIOLOGICAL SCIENCES↗