Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “considerations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

On incorporating reliability considerations into control system designs

This paper considers reliability in designing control systems for large orbital structures that are expected to have appreciable flexibility. Reliability is considered for both the control configuration (i.e. selecting sensor and actuator locations over an admissible set) and the ultimate operation of the system. The approach presented is to construct a cost function that indicates the absolute goal of the system and, for a given structural design, to determine the lowest achievable costs conditioned on the failure states of the system (i.e. which actuators and sensors are operational). These costs are then weighted and summed to provide an overall system performance measure. This measure is then minimized over the set of admissible control configurations. The approach is illustrated using a beam that has four actuators with the goal of achieving a given parabolic shape.

Montgomery, R. C.↗
NASA NTRS1980

Psychological considerations in future space missions

Issues affecting human psychological adjustments to long space missions are discussed. Noting that the Shuttle flight crewmembers will not have extensive flight qualification requirements, the effects of a more heterogeneous crew mixture than in early space flights is considered to create possibilities of social conflicts. Routine space flight will decrease the novelty of a formerly unique experience, and the necessity of providing personal space or other mechanisms for coping with crowded, permanently occupied space habitats is stressed. Women are noted to display more permeable personal space requirements. The desirability of planning leisure activities is reviewed, and psychological test results for female and male characteristics are cited to show that individuals with high scores in both traditionally male and female attributes are most capable of effective goal-oriented behavior and interpersonal relationships. Finally, it is shown that competitiveness is negatively correlated with the success of collaborative work and the social climate of an environment.

Helmreich, R. L.↗
NASA NTRS1980

Southeastern Virginia Urban Plume Study design considerations and measurement results

The Southeastern Virginia Urban Plume Study is intended to provide a testing ground for NASA remote sensors designed for urban and regional scale monitoring of air quality phenomena. The air quality experiments it has conducted have incorporated surface, airborne, sonde and balloon platforms which measured air quality and meteorology parameters, with emphasis on photochemically produced O3 and its primary precursors upwind, above, and downwind of the Hampton Roads area urban complex. The results from three years of experiments have shown that such different meteorological conditions as blue/broken skies, high/moderate temperatures and low/high winds have a direct impact on the degree of downwind aging of the summer urban O3 airmass. In 1979, the urban plume was traced at aging times of 0.5, 1.5, and 5 hr.

Mcdougal, D. S.↗
NASA NTRS1981

Identification of the projectile at the Brent crater, and further considerations of projectile types at terrestrial craters

An analysis of impact melt samples from a drill hole at the Brent crater in Ontario for siderophile trace elements indicative of meteoritic contamination, has resulted in 823-857 m-deep basalt melt zone samples enriched in Ir, Os, Pd, Ni, Co, Cr and Se over basement. The abundance pattern suggests a chondritic projectile and, from a Ni-Cr correlation of 10 melt samples, an L or LL chondrite is inferred. Data from the Manicouagan, Mitastin, and Zhamanshin craters are also assessed, and large differences in siderophile element concentrations are found among the tektites which otherwise have similar chemical compositions. There are now four known craters formed by chondrites, with Brent being the smallest among them.

Palme, H.↗
NASA NTRS1980

Performance considerations of frequency-hopping multiple access

The basic system parameters of a frequency-hopping multiple-access system are investigated. Noncoherent binary FSK and M-ary FSK signal formats are studied in a random-access asynchronous environment. Both slow and fast frequency hopping are considered. Under relatively ideal conditions, the degradation in performance with respect to the number of users is determined. The dependence on performance due to hopping rate and bandwidth constraint is developed. It is shown, for example, that, for fast hopping, the optimum hopping rate is that which spreads the users' power over the entire available bandwidth during each baud time. This agrees with the basic spread spectrum philosophy of making the signal appear white over as wide a bandwidth as possible. The computational results describe the trade-off between the number of tones in M-ary FSK and the number of hops per symbol. Given a specified number of tones in the frequency-hopping system, the results describe the manner in which the system degrades as the number of users is increased.

Weber, C. L.↗
NASA NTRS1982

Hydrogen outgassing considerations for an orbiting aluminum molecular shield

A molecular shield and associated hardware made of pure aluminum is shown to have an outgassing rate sufficiently low so that operations in orbit would undergo less density contributions than that present from the upper atmospheric atomic hydrogen contribution. Measurements of the atomic hydrogen outgassing from baked-out 6061 aluminum cylindrical samples 3 mm thick are demonstrated to be less than 1/100 trillion l/sec per sq cm, comparable to that of austenitic stainless steels. Calculations of the density distribution with a hemispherical molecular shield are presented, and the elimination of porosity in the aluminum shells is recommended by means of vacuum melting.

Outlaw, R. A.↗
NASA NTRS1980

Simplicity in command and control systems - A human factors consideration

The importance of simplicity in the man computer interface (MCI) is stressed because of the effect it has on the system containing the MCI. Results are used from an MCI study at the Jet Propulsion Laboratory to find an area where the system MCIs can be simplified. The circumstances under which these simplifications are appropriate are listed. The concepts of cognitive simplicity and process simplicity are presented as design alternatives for the MCI. In addition, the concepts of understandability, operation, learnability, level of learning, and usability are presented as tools for the system designer. The use of these concepts in developing a systematic MCI design is discussed.

Chafin, R. L.↗
NASA NTRS1982

Interior noise considerations for advanced high-speed turboprop aircraft

This paper describes recent research on noise generated by high-speed propellers, on noise transmission through acoustically treated aircraft sidewalls and on subjective response to simulated turboprop noise. Propeller noise discussion focuses on theoretical prediction methods for complex blade shapes designed for low noise at Mach = 0.8 flight and on comparisons with experimental test results. Noise transmission experiments using a 168 cm. diameter aircraft fuselage model and scaled heavy-double-wall treatments indicate that the treatments perform well and that the predictions are usually conservative. Studies of subjective comfort response in an anechoic environment are described for noise signatures having combinations of broadband and propeller-type tone components.

Mixson, J. S.↗
NASA NTRS1981

Considerations of open-loop, closed-loop, and adaptive multicyclic control systems

Four different types of self-tuning regulators were studied for multicyclic control of helicopter vibration. A numerical simulation of the helicopter is made, using a multivariable frequency-domain model, in terms of transfer function with six input control harmonics and six output harmonics. The model characteristics vary with flight speed. An off-line identification of model characteristics is made, using the least-squared-error method and using a succession of input and output measurements. The on-line identification of model characteristics is made using the Kalman filter solution. The optimal controls are calculated from the minimization of quadratic performance function based on response and multicyclic inputs. The performance of various regulators or controllers is judged from the stability, transient response, convergence time, and amplitude of the steady state.

Chopra, I.↗
NASA NTRS1982

Incidence angle considerations for spacecraft imaging radar

The value of radar imagery for most geologic applications is greatest when obtained with relatively large incidence angles. It is infeasible to attain these large angles from spacecraft altitudes. A study is being conducted to assess the usefulness of imagery collected at smaller angles. Radar image simulation is employed to create imagery for platform scenarios at numerous angles of incidence for specific geologic features. Preliminary analyses and results are provided.

Kaupp, V. H.↗
NASA NTRS1982

Field measurement of reflectance - Some major considerations

The simultaneous use of two portable spectroradiometers to measure radiance and irradiance from crop fields is reported. Two sensors were employed to assess the crop cover radiance reflectance, while a third instrument measured irradiance from a white Lambertian reflectance target, with all radiometers being equipped with optic fiber probes. Calibration procedures for the instruments are outlined, including the usage of laboratory standards and recalibration before every test by exposing all sensors to the Lambertian reflector. Calculation of the angular geometry between the sun, target, and sensor was found to be necessary to determine the angle dependence for each wave band and the surface variability. It is recommended that suitable portable equipment be fabricated with calibration procedures and manuals that can be used by the nonelectrical engineer in order to standardize measurements for comparison between two instruments.

Duggin, M. J.↗
NASA NTRS1982

Further considerations on modeling the sea breeze with a mixed-layer model

Mixed-layer models have been used to simulate low-level flows under a variety of situations, including flow over complex terrain and in the vicinity of coastal zones. The advantage of mixed-layer models compared to multilevel models is their simplicity and minimal computational requirements. A disadvantage is that the atmosphere above the mixed layer is not modeled explicitly and approximations pertaining to this layer become necessary. This paper examines five approximations for treating this upper layer for a simple sea-breeze circulation. Approximating the flow immediately above the mixed-layer height h by the mixed-layer velocity and using this velocity to advect potential temperature above h gives a better simulation of the sea breeze than the approximation used by Anthes et al. (1980), which neglected horizontal advection at this level.

Anthes, R. A.↗
NASA NTRS1981

Considerations in developing geographic informations systems based on low-cost digital image processing

The potential of digital image processing systems costing $20,000 or less for geographic information systems is assessed with the emphasis on the volume of data to be handled, the commercial hardware systems available, and the basic software for: (1) data entry, conversion and digitization; (2) georeferencing and geometric correction; (3) data structuring; (4) editing and updating; (5) analysis and retrieval; (6) output drivers; and (7) data management. Costs must also be considered as tangible and intangible factors.

Henderson, F. M.↗
NASA NTRS1981

Some considerations in low-cost image processing on a university main frame: The Penn State (ORSER) experience

The ORSER System as implemented on the Penn State University Computation Center's IBM main frame is an exceptionally useful mechanism for instructing the present and future remote sensing community in the theory and practice of automated analysis of digitized data. From its beginning, the system was used as the hands-on back-bone of a graduate level "Multispectral Remote Sensing" one-term course taught annually in the School of Forest Resources. It was also used at the end of a senior-level undergraduate "Introduction to Remote Sensing" course, and in teaching a variety of short courses, ranging in length from a few days for small groups of remote sensing consultants with specific application interests, to a 2-week course oganized by NASA for regional and urban planners who had little or no previous exposure to remote sensing. Because of its modular construction, the ORSER is suitable for all classes of remote sensing users. Although in a beginning course only 6 to 10 of the programs are generally used, the researcher has a set of about 35 programs available for his analyses.

Turner, B. J.↗
NASA NTRS1983

Introduction to human factors considerations in system design

A definition for human factors or ergonomics and its industrial and domestic application is presented. Human factors engineering, which discovers and applies information about human abilities, limitations, and other characteristics to the design of tools, machines, systems, tasks, jobs, and environments for safe, comfortable, and effective human use, is outlined. The origins of human factors and ergonomics, the philosophy of human factors, goals and objectives, systems development and design, are reviewed.

Chapanis, A.↗
NASA NTRS1983

Engineering and fabrication cost considerations for cryogenic wind tunnel models

Design and fabrication cost drivers for cryogenic transonic wind tunnel models are defined. The major cost factors for wind tunnel models are model complexity, tolerances, surface finishes, materials, material validation, and model inspection. The cryogenic temperatures require the use of materials with relatively high fracture toughness but at the same time high strength. Some of these materials are very difficult to machine, requiring extensive machine hours which can add significantly to the manufacturing costs. Some additional engineering costs are incurred to certify the materials through mechanical tests and nondestructive evaluation techniques, which are not normally required with conventional models. When instrumentation such as accelerometers and electronically scanned pressure modules is required, temperature control of these devices needs to be incorporated into the design, which requires added effort. Additional thermal analyses and subsystem tests may be necessary, which also adds to the design costs. The largest driver to the design costs is potentially the additional static and dynamic analyses required to insure structural integrity of the model and support system.

Boykin, R. M., Jr.↗
NASA NTRS1983

Dimensional stability considerations for cryogenic metals

Work performed as part of an effort to identify, and where possible separate out, some of the factors that contribute to dimensional stability in cryogenic wind tunnel models is reported. Initial problems were encountered with two dimensional models made of 15-5 PH stainless steel, which warped significantly after being subjected to cryogenic testing in the 0.3 Meter Transonic Cryogenic Tunnel. Subsequently, an effort was undertaken to investigate the mechanisms that could cause model warpage during cryogenic testing. The two basic mechanisms that can lead to warpage are (1) metallurgical structural instability in which one phase transforms partially or fully into a second phase which has a different crystal structure and volume, and (2) deformation due to the creation, or relief, of unbalanced induced or residual stresses. In the case of the 15-5 PH airfoils, it is highly probable that metallurgical instability was responsible for most of the observed warpage. A particular specimen configuration was established for use in the systematic evaluation of the factors influencing warpage. Preliminary studies of a specimen made of VASCOMAX 200 suggest the possibility of manipulating the stresses in the surface layers by appropriate combinations of milling and grinding steps. This opens up the possibility of correcting or establishing the required surface profile of an airfoil.

Wigley, D. A.↗