Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

REE in Shergottite Augites and Whole Rocks

Redox variations have been reported among the shergottites. Eu and Gd were used in partitioning experiments designed for the LEW86010 angrite, to infer a range of fO2 for the shergottites. Inferred fO2 using equilibria between Fe-Ti oxides was used. There is fairly good agreement between the Fe- Ti oxide determinations and the estimates from Eu anomalies in terms of which meteorites are more or less oxidized. The Eu anomaly technique and the Fe-Ti oxide technique both essentially show the same trend, with Shergotty and Zagami being the most oxidized and QUE94201 and DaG 476 being the most reduced. Thus, the variation in fO2 appears to be both real and substantive. However, although the redox trends indicated by the two techniques are similar, there is as much as a two log unit offset between the results of presented. One explanation for this offset is that the Eu calibration used for the shergottites was actually designed for the LEW86010 angrite, a silica-undersaturated basalt whose pyroxene (diopside) compositions are rather extreme. To correct this, a set of experiments were conducted on the redox relationship of Eu partitioning relative to Sm and Gd for pyroxene and melt compositions more relevant to Martian meteorites. We have taken the experimentally determined relationship between (Sm,Eu,Gd) and fO2 and applied it to augite Eu and Gd data for the basaltic Shergottites as well as previously unreported augite Sm data.

Musselwhite, D. S.↗

Use of New Communication Technologies to Change NASA Safety Culture: Incorporating the Use of Blogs as a Fundamental Communications Tool

The purpose of this paper is to explore an innovative approach to culture change at NASA that goes beyond reorganizations, management training, and a renewed emphasis on safety. Over the last five years, a technological social revolution has been emerging from the internet. Blogs (aka web logs) are transforming traditional communication and information sharing outlets away from established information sources such as the media. The Blogosphere has grown from zero blogs in 1999 to approximately 4.5 million as of November 2004 and is expected to double in 2005. Blogs have demonstrated incredible effectiveness and efficiency with regards to affecting major military and political events. Consequently, NASA should embrace the new information paradigm presented by blogging. NASA can derive exceptional benefits from the new technology as follows: 1) Personal blogs can overcome the silent safety culture by giving voice to concerns or questions that are not well understood or seemingly inconsequential to the NASA community at-large without the pressure of formally raising a potential false alarm. Since blogs can be open to Agency-wide participation, an incredible amount of resources from an extensive pool of experience can focus on a single issue, concern, or problem and quickly vetted, discussed and assessed for feasibility, significance, and criticality. The speed for which this could be obtained cannot be matched through any other process or procedure currently in use. 2) Through official NASA established blogs, lessons learned can be a real-time two way process that is formed and implemented from the ground level. Data mining of official NASA blogs and personal blogs of NASA personnel can identify hot button issues and concerns to senior management. 3) NASA blogs could function as a natural ombudsman for the NASA community. Through the recognition of issues being voiced by the community and taking a proactive stance on those issues, credibility within NASA Management can be restored. For NASA to harness the capabilities of blogs, NASA must develop an Agency-wide policy on blogging to encourage use and provide guidance. This policy should describe basic rules of conduct and content as well as a policy of non-retribution and/or anonymity. The Agency must provide sever space within their firewalls, provide appropriate software tools, and promote blogs in newsletters and official websites. By embracing the use of blogs, a potential pool of 19,000 experts could be available to address each posted safety issue, concern, problem, or question. Blogs could result in real NASA culture change.

Huls, Dale thomas↗

Safe2Ditch Steer-To-Clear Development and Flight Testing

This paper describes a series of small unmanned aerial system (sUAS) flights performed at NASA Langley Research Center in April and May of 2019 to test a newly added Steer-to-Clear feature for the Safe2Ditch (S2D) prototype system. S2D is an autonomous crash management system for sUAS. Its function is to detect the onset of an emergency for an autonomous vehicle, and to enable that vehicle in distress to execute safe landings to avoid injuring people on the ground or damaging property. Flight tests were conducted at the City Environment Range for Testing Autonomous Integrated Navigation (CERTAIN) range at NASA Langley. Prior testing of S2D focused on rerouting to an alternate ditch site when an occupant was detected in the primary ditch site. For Steer-to-Clear testing, S2D was limited to a single ditch site option to force engagement of the Steer-to-Clear mode. The implementation of Steer-to-Clear for the flight prototype used a simple method to divide the target ditch site into four quadrants. An RC car was driven in circles in one quadrant to simulate an occupant in that ditch site. A simple implementation of Steer-to- Clear was programmed to land in the opposite quadrant to maximize distance to the occupant’s quadrant. A successful mission was tallied when this occurred. Out of nineteen flights, thirteen resulted in successful missions. Data logs from the flight vehicle and the RC car indicated that unsuccessful missions were due to geolocation error between the actual location of the RC car and the derived location of it by the Vision Assisted Landing component of S2D on the flight vehicle. Video data indicated that while the Vision Assisted Landing component reliably identified the location of the ditch site occupant in the image frame, the conversion of the occupant’s location to earth coordinates was sometimes adversely impacted by errors in sensor data needed to perform the transformation. Logged sensor data was analyzed to attempt to identify the primary error sources and their impact on the geolocation accuracy. Three trends were observed in the data evaluation phase. In one trend, errors in geolocation were relatively large at the flight vehicle’s cruise altitude, but reduced as the vehicle descended. This was the expected behavior and was attributed to sensor errors of the inertial measurement unit (IMU). The second trend showed distinct sinusoidal error for the entire descent that did not always reduce with altitude. The third trend showed high scatter in the data, which did not correlate well with altitude. Possible sources of observed error and compensation techniques are discussed.

Petty, Bryan J.↗

Reactive transport in the complex heterogeneous alluvial aquifer of Fortymile Wash, Nevada

Yucca Mountain, Nevada, had been extensively investigated as a potential deep geologic repository for storing high-level nuclear wastes. Previous field investigations of stratified alluvial aquifer downstream of the site revealed that there is a hierarchy of sedimentary facies types. There is a corresponding log conductivity and reactive surface area subpopulations within each facies at each scale of sedimentary architecture. Here in this paper, we use a Lagrangian-based transport model in order to analyze radionuclide dispersion in the saturated alluvium of Fortymile Wash, Nevada. First, we validate the Lagrangian model using high-resolution flow and reactive transport simulations. Then, we used the validated model to investigate how each scale of sedimentary architecture may affect long-term radionuclide transport at Yucca Mountain. Results show that the reactive solute dispersion developed by the Lagrangian model matches the ensemble average of numerical simulations well. The link between the alluvium spatial variability and reactive solute dispersion at different spatiotemporal scales is demonstrated using the Lagrangian model. Finally, the longitudinal dispersivity of the reactive plume can be on the order of hundreds to thousands of meters, and it may not reach its asymptotic value even after 10,000 years of travel time and 2–3 km of travel distance.

54 ENVIRONMENTAL SCIENCES↗

Synthesizing realistic sand assemblies with denoising diffusion in latent space

Abstract The shapes and morphological features of grains in sand assemblies have far‐reaching implications in many engineering applications, such as geotechnical engineering, computer animations, petroleum engineering, and concentrated solar power. Yet, our understanding of the influence of grain geometries on macroscopic response is often only qualitative, due to the limited availability of high‐quality 3D grain geometry data. In this paper, we introduce a denoising diffusion algorithm that uses a set of point clouds collected from the surface of individual sand grains to generate grains in the latent space. By employing a point cloud autoencoder, the three‐dimensional point cloud structures of sand grains are first encoded into a lower‐dimensional latent space. A generative denoising diffusion probabilistic model is trained to produce synthetic sand that maximizes the log‐likelihood of the generated samples belonging to the original data distribution measured by a Kullback‐Leibler divergence. Numerical experiments suggest that the proposed method is capable of generating realistic grains with morphology, shapes and sizes consistent with the training data inferred from an F50 sand database. We then use a rigid contact dynamic simulator to pour the synthetic sand in a confined volume to form granular assemblies in a static equilibrium state with targeted distribution properties. To ensure third‐party validation, 50,000 synthetic sand grains and the 1542 real synchrotron microcomputed tomography (SMT) scans of the F50 sand, as well as the granular assemblies composed of synthetic sand grains are made available in an open‐source repository.

Vlassis, Nikolaos N.↗

The clustering of galaxies in the completed SDSS-III Baryon Oscillation Spectroscopic Survey: Double-probe measurements from BOSS galaxy clustering and Planck data – towards an analysis without informative priors

Here, we develop a new methodology called double-probe analysis with the aim of minimizing informative priors in the estimation of cosmological parameters. We extract the dark-energy-model-independent cosmological constraints from the joint data sets of Baryon Oscillation Spectroscopic Survey (BOSS) galaxy sample and Planck cosmic microwave background (CMB) measurement. We measure the mean values and covariance matrix of {R, l a , Ω b h 2 , n s , log(A s ), Ω k , H(z), D A (z), f(z)σ 8 (z)}, which give an efficient summary of Planck data and 2-point statistics from BOSS galaxy sample, where R = √Ω m H 2 0 , and l a = πr(z * )/r s (z * ), z * is the redshift at the last scattering surface, and r(z * ) and r s (z * ) denote our comoving distance to z * and sound horizon at z * respectively. The advantage of this method is that we do not need to put informative priors on the cosmological parameters that galaxy clustering is not able to constrain well, i.e. Ω b h 2 and n s . Using our double-probe results, we obtain Ω m = 0.304 ± 0.009, H 0 = 68.2 ± 0.7, and σ 8 = 0.806 ± 0.014 assuming ΛCDM; and Ω k = 0.002 ± 0.003 and w = –1.00 ± 0.07 assuming owCDM. The results show no tension with the flat ΛCDM cosmological paradigm. By comparing with the full-likelihood analyses with fixed dark energy models, we demonstrate that the double-probe method provides robust cosmological parameter constraints which can be conveniently used to study dark energy models. We extend our study to measure the sum of neutrino mass and obtain Σm ν < 0.10/0.22 (68%/95%) assuming ΛCDM and Σm ν < 0.26/0.52 (68%/95%) assuming wCDM. This paper is part of a set that analyses the final galaxy clustering dataset from BOSS.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-CAMPUS-I-04: Automatic Skin-Dose Mapping for An Angiographic System with a Region-Of-Interest, High-Resolution Detector

Purpose: Our real-time skin dose tracking system (DTS) has been upgraded to monitor dose for the micro-angiographic fluoroscope (MAF), a high-resolution, small field-of-view x-ray detector. Methods: The MAF has been mounted on a changer on a clinical C-Arm gantry so it can be used interchangeably with the standard flat-panel detector (FPD) during neuro-interventional procedures when high resolution is needed in a region-of-interest. To monitor patient skin dose when using the MAF, our DTS has been modified to automatically account for the change in scatter for the very small MAF FOV and to provide separated dose distributions for each detector. The DTS is able to provide a color-coded mapping of the cumulative skin dose on a 3D graphic model of the patient. To determine the correct entrance skin exposure to be applied by the DTS, a correction factor was determined by measuring the exposure at the entrance surface of a skull phantom with an ionization chamber as a function of entrance beam size for various beam filters and kVps. Entrance exposure measurements included primary radiation, patient backscatter and table forward scatter. To allow separation of the dose from each detector, a parameter log is kept that allows a replay of the procedure exposure events and recalculation of the dose components.The graphic display can then be constructed showing the dose distribution from the MAF and FPD separately or together. Results: The DTS is able to provide separate displays of dose for the MAF and FPD with field-size specific scatter corrections. These measured corrections change from about 49% down to 10% when changing from the FPD to the MAF. Conclusion: The upgraded DTS allows identification of the patient skin dose delivered when using each detector in order to achieve improved dose management as well as to facilitate peak skin-dose reduction through dose spreading. Research supported in part by Toshiba Medical Systems Corporation and NIH Grants R43FD0158401, R44FD0158402 and R01EB002873.

60 APPLIED LIFE SCIENCES↗

Ree in Shergottite Augites and Whole Rocks

Redox variations have been reported among the shergottites. Eu and Gd partitioning experiments designed for the LEW86010 angrite, to infer a range of fo2 for the shergottites have been used. Fo2 using equilibria between Fe-Ti oxides have been inferred. There is fairly good agreement between the Fe-Ti oxide determinations and the estimates from Eu anomalies in terms of which meteorites are more or less oxidized. The Eu anomaly technique and the Fe-Ti oxide technique both essentially show the same trend, with Shergotty and Zagami being the most oxidized and QUE94201 and DaG 476 being the most reduced. Thus, the variation in fo2 appears to be both real and substantive. However, although the redox trends indicated by the two techniques are similar, there is as much as a two log unit offset between the results. One explanation for this offset is that the Eu calibration used for the shergottites was actually designed for the LEW86010 angrite, a silica-undersaturated basalt whose pyroxene (diopside) compositions are rather extreme. To correct this, a set of experiments on the redox relationship of Eu partitioning relative to Sm and Gd for pyroxene and melt compositions more relevant to Martian meteorites were conducted. We have taken the experimentally determined relationship between D (sup Augite/melt) (Sm,Eu,Gd) and fO2 and applied it to augite Eu and Gd data for the basaltic Shergottites of as well as previously unreported augite Sm data.

Musselwhite, D. S.↗

Probabilistic Assessment and Uncertainty Analysis of CO2 Storage Capacity of the Morrow B Sandstone—Farnsworth Field Unit

This paper presents probabilistic methods to estimate the quantity of carbon dioxide (CO2) that can be stored in a mature oil reservoir and analyzes the uncertainties associated with the estimation. This work uses data from the Farnsworth Field Unit (FWU), Ochiltree County, Texas, which is currently undergoing a tertiary recovery process. The input parameters are determined from seismic, core, and fluid analyses. The results of the estimation of the CO2 storage capacity of the reservoir are presented with both expectation curve and log probability plot. The expectation curve provides a range of possible outcomes such as the P90, P50, and P10. The deterministic value is calculated as the statistical mean of the storage capacity. The coefficient of variation and the uncertainty index, P10/P90, is used to analyze the overall uncertainty of the estimations. A relative impact plot is developed to analyze the sensitivity of the input parameters towards the total uncertainty and compared with Monte Carlo. In comparison to the Monte Carlo method, the results are practically the same. The probabilistic technique presented in this paper can be applied in different geological settings as well as other engineering applications.

03 NATURAL GAS↗

Synchronous NDVI and Surface Air Temperature Trends in Newfoundland: 1982 to 2003

The northern regions of the earth are currently experiencing rapid change in temperature and precipitation. This region contains -40% of carbon stored in the world's soil which has accumulated from the last ice age (over 10,000 years ago). The carbon has remained to this point due to reduced decomposition from the short growing seasons and subfreezing temperatures. The influence of climate upon plant growth can have significant consequences to the carbon cycle balance in this region and could potentially alter and release this long term store of carbon to the atmosphere, resulting in a negative feedback enhancing climate warming. These changes have the potential to alter ecosystems processes, which impact human well being. This paper investigated a global satellite record of increases in vegetation growth from 1982 to 2003 developed at GSFC. It was found that, Newfoundland's vegetation growth during the 1990s exceeded global measurements. A number of potential causes were investigated to understand the mechanistic environmental drivers that could alter the productivity of this ecosystem. Possible drivers of change included: human influence of land use change on vegetation cover; changes in precipitation; temperature; cloud cover; snow cover; and growing season length. We found that humans had a minimal influence on vegetation growth in Newfoundland. Less than 6% of the island was logged during the investigation. We found a strong correlation of vegetation growth to a lengthening of the growing season of -9 and -17 days from 1982-1990 and 1991-1999. A distinct drop in plant growth and air temperature was found in 1990 to 1991 from the volcanic eruption of Mt. Pinatubo that reduced global surface air temperatures. These results document the influences of air temperature upon northern forest plant growth and the cooling effects of major volcanic eruptions in this ecological system.

Neigh, C. S. R.↗

Characteristics of In Situ Fine Fraction Aerosol Spectra from 300-700 nm Observed Around the Korean Peninsula During KORUS-OC

In situ aerosol extinction and absorption spectra covering the 300-700 nm range at ≤ 1 nm spectral resolution were measured aboard the R/V Onnuri during the Korea U.S. – Ocean Color (KORUS-OC) cruise around the Korean Peninsula from May 21 through June 3, 2016. Total absorption spectra were obtained from aerosols collected on glass fiber filters and subsequently placed in the center of an integrating sphere (Labsphere DRA-CA-30) attached to a dual beam spectrophotometer (Cary 100 Bio UV-Visible Spectrophotometer, 0.2 nm spectral resolution). Absorption spectra from methanol and deionized water extracts of aerosols collected on Teflon filters were measured in a liquid waveguide capillary cell (World Precision Instruments LWCC- 3100, ~0.4 nm spectral resolution). Extinction spectra were measured with a custom built instrument (SpEx, ~0.8 nm spectral resolution). The measurements were obtained at a height of ~10 m above the sea surface with an inlet that limited the measured aerosols to diameters ≤ 1.3 µm. All four sets of spectra exhibit curvature in log-log space with 2nd order polynomials providing a better fit to the measured spectra than power law fits. The deionized water extracts were also analyzed with an ion chromatograph (Dionex ICS-3000 Ion Chromatography System) and with an aerosol mass spectrometer (Aerodyne Research, Inc. HR-ToF High Resolution Aerosol Mass Spectrometer) to examine chemical composition. These data indicate the optical spectra are sensitive to differing chemical properties of the measured ambient aerosols and suggest differing sources and/or atmospheric processes influence the observed optical signatures. The measured suite of spectra are combined to examine the spectral characteristics of single scattering albedo, as well as to examine the contribution of soluble absorbing chromophores to the total absorption spectra. Additional measurements made during the affiliated Korea U.S. - Air Quality (KORUS-AQ) campaign will be used to provide further insight on the observed spectral characteristics.

Jordan, Carolyn E↗

MSL Telecom Automated Anomaly Detection

The Mars Science Laboratory (MSL) Telecom Operations Team at the Jet Propulsion Laboratory (JPL) has implemented a machine learning system in order to automate the anomaly detection process as a part of daily operations. Machine learning enables reliable detection of anomalies in Telecom-related telemetry and automated reporting of Telecom subsystem status, resulting in an 90% reduction in team workload and improved anomaly detection reliability. At present, machine learning methods are used to detect: 1. Anomalous long-term trends in telemetry data 2. Anomalous time-domain evolution of telemetry values Both types of anomalies pose their own unique challenges that are addressed in different ways. In the first case, long term trending of daily minima, maximum, and mean telemetry values in temperatures, currents, voltages, and radio frequency (RF) power levels is used in addition to hard threshold safety checks to look for changes in long-term equipment health and performance. Long-term trending methods allow for ordinary seasonal variations in these quantities caused by temperature changes over the course of the Martian year while allowing operators to determine whether current performance remains in line with historical values from previous years. Changes in long-term trends can provide important insights into the health and status of the rover's on-board systems as well as valuable early warning if subtle degradation begins to take hold. But while trending of daily statistics is valuable, it does not detect anomalies in the short-term time evolution of data over the course of minutes or hours during a day, and this task is handled with short-term shape analysis. Principal components analysis (PCA) has been found to provide robust detection of short-term anomalies, and several examples of the use of PCA to detect actual anomalous events will be provided here. In using PCA, we use both the percentage of explained variance and also a log likelihood test on the PCA expansion coefficients to flag telemetry data for human review. Previous work in the field of spacecraft anomaly detection includes [1] for MSL and [2] for some other JPL missions.

Mukai, Ryan↗

Mass–Metallicity Relation and Fundamental Metallicity Relation of Metal-poor Star-forming Galaxies at 0.6<$Z$<0.9 from the eBOSS Survey

The stellar mass–metallicity relation (M * –Z; MZR) indicates that the metallicities of galaxies increase with increasing stellar masses. The fundamental metallicity relation (FMR) suggests that galaxies with higher star formation rates (SFRs) tend to have lower metallicities for a given stellar mass. To examine whether the MZR and FMR still hold at poorer metallicities and higher redshifts, we compile a sample of 35 star-forming galaxies (SFGs) at 0.6 < $z$ < 0.9 using the public spectral database (v5_10_0) of emission-line galaxies from the extended Baryon Oscillation Spectroscopic Survey. These galaxies are identified for their significant auroral [O iii]λ4363 emission line (S/N $\leqslant$ 3). With the electronic temperature metallicity calibration, we find nine SFGs that are extremely metal-poor galaxies with 12 + log(O/H) $\leqslant$ 7.69 (1/10 Z ⊙ ). The metallicity of the most metal-deficient galaxy is 7.35 ± 0.09 (about 1/20 Z ⊙ ). Compared to the SFGs with normal metallicities in the local and high-redshift universe, our metal-poor SFGs have more than 10 times higher SFRs at a fixed stellar mass. We create a new mass–SFR relation for these metal-poor galaxies at 0.6 < $z$ < 0.9. Due to the higher SFRs and younger stellar ages, our metal-poor SFGs deviate from the MZR and FMR in the local universe toward lower metallicities, confirming the existence of FMR, as well as the cosmic evolution of MZR and FMR with redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Deep galaxy counts in the K band with the Kech telescope

We present deep galaxy counts in the K (lambda 2.2 micrometer) band, obtained at the W. M. Kech 10 m telescope. The data reach limiting magnitudes K approximately 24 mag, about 5 times deeper than the deepest published K-band images to date. The counts are performed in three small (approximately 1 min), widely separated high-latitude fields. Extensive Monte Carlo tests were used to derive the comleteness corrections and minimize photometric biases. The counts continue to rise, with no sign of a turnover, down to the limits of our data, with the logarithmic slope of d log N/dm = 0.315 +/- 0.02 between K = 20 and 24 mag. This implies a cumulative surface density of approximately 5 x 10(exp 5) galaxies/sq deg, or approximately 2 x 10(exp 10) over the entire sky, down to K = 24 mag. Our counts are in good agreement with, although slightly lower than, those from the Hawaii Deep Survey by Cowie and collaborators; the discrepancies may be due to the small differences in the aperture corrections. We compare our counts with some of the available theoretical predictions. The data do not require models with a high value of Omega(sub 0), but can be well fitted by models with no (or little) evolution, and cosmologies with a low value of Omega(sub 0). Given the uncertainties in the models, it may be premature to put useful constrains on the value of Omega(sub 0) from the counts alone. Optical-to-IR colors are computed, using CCD data obtaind previously at Palomar. We find a few red galaxies with (r-K) approximately greater than 5 mag, or (i-K) approximately greater than 5 mag; these may be ellipticals at z approximately 1. While the redshift distribution of galaxies in our counts is still unknown, the flux limits reached would allow us to detect unobscured L(sub *) galaxies out to substantial redshifts (z greater than 3?).

Djorgovski, S.↗

A high-resolution survey of interstellar Na I D1 lines

We present high-resolution (0.5 km/s) spectra, obtained with the McDonald Observatory 2.7 m coude echelle spectrograph, of interstellar Na I D1 absorption toward 38 bright stars. Numerous narrow, closely blended absorption components, showing resolved Na I hyperfine structure, are evident in these spectra; such narrow components appear in both low halo and quite local gas, as well as in gas toward more distant disk stars. We have used the method of profile fitting in an attempt to determine column densities, line widths, and velocities for the individual interstellar clouds contributing to the observed absorption lines. The resulting sample of 276 clouds is significantly larger, and likely more complete, than several previous samples of 'individual' interstellar clouds, and allows more precise investigation of various statistical properties. We find that the cloud column density (N) and line width parameter (b) are not correlated, for 0.3 km/s approximately less than b approximately less than 1.5 km/s and 10.0/sq cm approximately less than log (N(Na I)) approximately less than 11.6/sq cm. The median b is about 0.73 km/s, the median log N is about 11.09/sq cm, and the median separation between adjacent components is about 2.0 km/s. All these are overestimates of the true median values, however, due to our inability to completely resolve all the component structure present in some cases; even at a resolution of 0.5 km/s, we may have discerned only 60% of the full number of individual components actually present. The one-dimensional dispersion of component velocities, in the local standard of rest, is approximately 8.6 km/s; the distribution of velocities is broader and displaced to more negative velocities for the weaker components. If 80 K is a representative temperature for the interstellar clouds seen in Na I absorption, then at least 38% (and probably the majority) of the clouds have subsonic internal turbulent motions. The range in N(H I) observed at a given N(Na I) increases as N(Na I) decreases below about 10(exp 11)/sq cm, so that N(Na I) becomes a less reliable predictor of N(H I) at low column densities. These spectra will be quite useful in future detailed studies of these lines of sight with the Hubble Space Telescope (HST) Goddard High Resolution Spectrograph (GHRS) echelle -- to determine accurate velocities and to reveal the detailed interstellar component structures that cannot be discerned at the 3.5 km/s resolution available with the GHRS.

Welty, Daniel E.↗

Acridine orange staining reaction as an index of physiological activity in Escherichia coli

The assumption that the acridine orange (AO) color reaction may be used as an index of physiological activity was investigated in laboratory grown Escherichia coli. Spectrofluorometric observations of purified nucleic acids, ribosomes and the microscopic color of bacteriophage-infected cells stained with AO confirmed the theory that single-stranded nucleic acids emit orange to red fluorescence while those that are double-stranded fluoresce green in vivo. Bacteria growing actively in a rich medium could be distinguished from cells in stationary phase by the AO reaction. Cells from log phase appeared red, whereas those in stationary phase were green. However, this differentiation was not seen when the bacteria were grown in a minimal medium or when a variation of the staining method was used. Also, shifting bacteria in stationary phase to starvation conditions rapidly changed their AO staining reaction. Boiling and exposure to lethal concentrations of azide and formalin resulted in stationary-phase cells that appeared red after staining but bacteria killed with chlorine remained green. These findings indicate that the AO staining reaction may be suggestive of physiological activity under defined conditions. However, variables in staining and fixation procedures as well as uncertainties associated with mixed bacterial populations in environmental samples may produce results that are not consistent with the classical interpretation of this reaction. The importance of validating the putative physiological implications of this staining reaction is stressed.

NASA Discipline Number 04-10↗

A COMPARISON OF NEAR-INFRARED PHOTOMETRY AND SPECTRA FOR Y DWARFS WITH A NEW GENERATION OF COOL CLOUDY MODELS

We present YJHK photometry, or a subset, for the six Y dwarfs discovered in Wide-field Infrared Survey Explorer (WISE) data by Cushing et al. The data were obtained using the Near-Infrared Imager on the Gemini North telescope; YJHK were obtained for WISEP J041022.71+150248.5, WISEP J173835.52+273258.9, and WISEPC J205628.90+145953.3; YJH for WISEPC J140518.40+553421.5 and WISEP J154151.65225025.2; and YJK for WISEP J182831.08+265037.8. We also present a far-red spectrum obtained using GMOS-North for WISEPC J205628.90+145953.3. We compare the data to Morley et al. models, which include cloud decks of sulfide and chloride condensates. We find that the models with these previously neglected clouds can reproduce the energy distributions of T9 to Y0 dwarfs quite well, other than near 5 {mu}m where the models are too bright. This is thought to be because the models do not include departures from chemical equilibrium caused by vertical mixing, which would enhance the abundance of CO and CO{sub 2}, decreasing the flux at 5 {mu}m. Vertical mixing also decreases the abundance of NH{sub 3}, which would otherwise have strong absorption features at 1.03 {mu}m and 1.52 {mu}m that are not seen in the Y0 WISEPC J205628.90+145953.3. We find that the five Y0 to Y0.5 dwarfs have 300 {approx}< T {sub eff} K {approx}< 450, 4.0 {approx}< log g {approx}< 4.5, and f {sub sed} Almost-Equal-To 3. These temperatures and gravities imply a mass range of 5-15 M {sub Jupiter} and ages around 5 Gyr. We suggest that WISEP J182831.08+265037.8 is a binary system, as this better explains its luminosity and color. We find that the data can be made consistent with observed trends, and generally consistent with the models, if the system is composed of a T {sub eff} Almost-Equal-To 325 K and log g {approx}< 4.5 primary, and a T {sub eff} Almost-Equal-To 300 K and log g {approx}> 4.0 secondary, corresponding to masses of 10 and 7 M {sub Jupiter} and an age around 2 Gyr. If our deconvolution is correct, then the T {sub eff} Almost-Equal-To 300 K cloud-free model fluxes at K and W2 are too faint by 0.5-1.0 mag. We will address this discrepancy in our next generation of models, which will incorporate water clouds and mixing.

79 ASTRONOMY AND ASTROPHYSICS↗

MASSIVE STAR FORMATION AT THE PERIPHERY OF THE EVOLVED GIANT H II REGION W 39

We present the first detailed study of the large, {approx}30 pc diameter, inner-Galaxy H II region W 39. Radio recombination line observations combined with H I absorption spectra and Galactic rotation models show that the region lies at V{sub LSR} = +65.4 {+-} 0.5 km s{sup -1}, corresponding to a near kinematic distance of 4.5 {+-} 0.2 kpc. Analysis of radio continuum emission shows that the H II region is being powered by a cluster of OB stars with a combined hydrogen-ionizing luminosity of log (Q) {>=} 50, and that there are three compact H II regions located on the periphery of W 39, each with log (Q) {approx} 48.5 (single O7-O9 V star equivalent). In the infrared, W 39 has a hierarchical bubble morphology, and is a likely site of sequential star formation involving massive stars. Kinematic models of the expansion of W 39 yield timescales of the order of Myr, consistent with a scenario where the formation of the smaller H II regions has been triggered by the expansion of W 39. Using Spitzer GLIMPSE and MIPSGAL data, we show that star formation activity is not distributed uniformly around the periphery of W 39 but is concentrated in two areas that include the compact H II regions as well as a number of intermediate-mass Class I and Class II young stellar objects.

79 ASTRONOMY AND ASTROPHYSICS↗