Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Polarization transfer observables in elastic electron-proton scattering at Q 2 = 2.5 , 5.2, 6.8, and 8.5 GeV 2

In this paper, interest in the behavior of nucleon electromagnetic form factors at large momentum transfers has steadily increased since the discovery, using polarization observables, of the rapid decrease of the ratio G p E /G p M of the proton's electric and magnetic form factors for momentum transfers Q 2 ≳ 1 GeV 2 , in strong disagreement with previous extractions of this ratio using the traditional Rosenbluth separation technique. The GEp-III and GEp-2$\gamma$ experiments were carried out in Jefferson Lab's (JLab's) Hall C from 2007-2008, to extend the knowledge of $G_E^p/G_M^p$ to the highest practically achievable $Q^2$ and to search for effects beyond the Born approximation in polarization transfer observables of elastic $\vec{e}p$ scattering. This article reports an expanded description of the common experimental apparatus and data analysis procedure, and the results of a final reanalysis of the data from both experiments, including the previously unpublished results of the full-acceptance data of the GEp-2$\gamma$ experiment. The Hall C High Momentum Spectrometer detected and measured the polarization of protons recoiling elastically from collisions of JLab's polarized electron beam with a liquid hydrogen target. A large-acceptance electromagnetic calorimeter detected the elastically scattered electrons in coincidence to suppress inelastic backgrounds. The final GEp-III data are largely unchanged relative to the originally published results. The statistical uncertainties of the final GEp-2$\gamma$ data are significantly reduced at $\epsilon = 0.632$ and $0.783$ relative to the original publication. The decrease with $Q^2$ of $G_E^p/G_M^p$ continues to $Q^2 = 8.5$ GeV$^2$, but at a slowing rate relative to the approximately linear decrease observed in earlier Hall A measurements. At $Q^2 = 2.5$ GeV$^2$, the proton form factor ratio $G_E^p/G_M^p$ shows no statistically significant $\epsilon$-dependence, as expected in the Born approximation. The ratio $P_\ell/P_\ell^{Born}$ of the longitudinal polarization transfer component to its Born value shows an enhancement of roughly 1.7\% at $\epsilon = 0.783$ relative to $\epsilon = 0.149$, with $\approx 2.2\sigma$ significance based on the total uncertainty, implying a similar effect in the transverse component $P_t$ that cancels in the ratio $R$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Longitudinal and transverse spin transfer to $Λ$ and $\overline{Λ}$ hyperons in polarized $p$ + $p$ collisions at √s = 200 GeV

The longitudinal and transverse spin transfers to Λ ($\overline{Λ}$) hyperons in polarized proton-proton collisions are expected to be sensitive to the helicity and transversity distributions, respectively, of (anti)strange quarks in the proton, and to the corresponding polarized fragmentation functions. We report improved measurements of the longitudinal spin transfer coefficient, D LL , and the transverse spin transfer coefficient, D TT , to Λ and $\overline{Λ}$ in polarized proton-proton collisions at √s = 200 GeV by the STAR experiment at RHIC. The dataset includes longitudinally polarized proton-proton collisions with an integrated luminosity of 52 pb –1 , and transversely polarized proton-proton collisions with a similar integrated luminosity. Both datasets have about twice the statistics of previous results and cover a kinematic range of |η Λ ($\overline{Λ}$) | < 1.2 and transverse momentum p T , Λ($\overline{Λ}$) up to 8GeV/c. We also report the first measurements of the hyperon spin transfer coefficients D LL and D TT as a function of the fractional jet momentum z carried by the hyperon, which can provide more direct constraints on the polarized fragmentation functions

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Conjugate heat and mass transfer in the lattice Boltzmann equation method

An interface treatment for conjugate heat and mass transfer in the lattice Boltzmann equation method is proposed based on our previously proposed second-order accurate Dirichlet and Neumann boundary schemes. The continuity of temperature (concentration) and its flux at the interface for heat (mass) transfer is intrinsically satisfied without iterative computations, and the interfacial temperature (concentration) and their fluxes are conveniently obtained from the microscopic distribution functions without finite-difference calculations. The present treatment takes into account the local geometry of the interface so that it can be directly applied to curved interface problems such as conjugate heat and mass transfer in porous media. For straight interfaces or curved interfaces with no tangential gradient, the coupling between the interfacial fluxes along the discrete lattice velocity directions is eliminated and thus the proposed interface schemes can be greatly simplified. Several numerical tests are conducted to verify the applicability and accuracy of the proposed conjugate interface treatment, including (i) steady convection-diffusion in a channel containing two different fluids, (ii) unsteady convection-diffusion in the channel, (iii) steady heat conduction inside a circular domain with two different solid materials, and (iv) unsteady mass transfer from a spherical droplet in an extensional creeping flow. The accuracy and order of convergence of the simulated interior temperature (concentration) field, the interfacial temperature (concentration), and heat (mass) flux are examined in detail and compared with those obtained from the "half-lattice division" treatment in the literature. The present analysis and numerical results show that the half-lattice division scheme is second-order accurate only when the interface is fixed at the center of the lattice links, while the present treatment preserves second-order accuracy for arbitrary link fractions. For curved interfaces, the present treatment yields second-order accurate interior and interfacial temperatures (concentrations) and first-order accurate interfacial heat (mass) flux. An increase of order of convergence by one degree is obtained for each of these three quantities compared with the half-lattice division scheme. The surface-averaged Sherwood numbers computed in test (iv) agree well with published results.

Li, LK↗

Key role of antibonding electron transfer in bonding on solid surfaces

The description of the chemical bond between a solid surface and an atom or a molecule is the fundamental basis for understanding surface reactivity and catalysis. Despite considerable research efforts, the physics that rules the strength of such chemical bonds remains elusive, especially on semiconductor surfaces. Widespread understandings are mostly based on the degree of filling of antibonding surface-adsorbate states that weaken the surface adsorption. The unoccupied antibonding surface-adsorbate states are often considered to have no effects on surface bonding. Here in this paper, we show that the energy levels of unoccupied antibonding surface-adsorbate states relative to the Fermi-level play a critical role in determining the trends in variations of surface adsorption energies. The electrons that would occupy those high-energy antibonding states are transferred to the Fermi-level, leading to an energy gain that largely controls surface bonding. To illustrate this picture, as a validating case, we study the hydrogen evolution reaction (HER) catalyzed by MoS 2 from density functional theory calculations. We find that the majority of antibonding surface-hydrogen states are positioned well above the Fermi-energy. A clear linear relationship between the energy gain from antibonding electron transfer and the adsorption energy is identified for hydrogen binds to either molybdenum or sulfur atoms at different sites. The antibonding-electron transfer energy can thus serve as a primary catalytic activity descriptor. The emerging picture identifies the origin of HER on MoS 2 , which is related to the empty in-gap states induced by sulfur vacancies or edges. Under this picture, the effects of surface inhomogeneity (e.g., defects, step edges) on surface bonding strength can be understood. This antibonding electron transfer picture also offers a physically different explanation for the well-known d-band theory for hydrogen adsorption on transition metal surfaces. The results provide guidelines for understanding and optimizing catalyst performance and designing new solid catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cast or Additively Manufactured Coils with End Turn Enhanced Heat Transfer Surfaces for Spray or Jet Cooling

Cast or additively manufactured coils present a new opportunity for creativity in thermal management of electric machines. Improvements to the heat transfer of spray or jet cooling of coil end turns through the incorporation of pins or enhanced heat transfer surfaces in the cast end turn surfaces is explored. The thermal response of cast copper half-turns is measured for a range of spray/jet volumetric flow rates and ohmic loss heat fluxes. A significant reduction, ~30%, in the steady state temperature and increased spray cooling heat transfer coefficients was experimentally measured when the pins or enhanced heat transfer surfaces are incorporated.

33 ADVANCED PROPULSION SYSTEMS↗

An Intelligent Metasurface-Based Wireless Power Transfer System

Wireless Power Transfer (WPT) systems are getting more popular in recent years in a wide range of application areas. However, the performance of wireless power transfer systems is adversely affected by coil misalignment and increased power transfer distance. To overcome the limitations, the proposed method in this paper will place an intelligent controllable metasurface between the transmitter and receiver coils. The goal is to establish the feasibility of a metasurface-assisted, intelligent WPT charging system by variable coil design and angle of arrival estimation using machine learning for multiple misalignment cases. We will feed these angles of arrival data to reconfigure the metasurface. The inclusion of a controllable metasurface will improve efficiency and increase the power transfer distance.

Aydin, Emrullah↗

Experiments and Analyses of Data Transfers Over Wide-Area Dedicated Connections

Dedicated wide-area network connections are increasingly employed in high-performance computing and big data scenarios. One might expect the performance and dynamics of data transfers over such connections to be easy to analyze due to the lack of competing traffic. However, non-linear transport dynamics and end-system complexities (e.g., multi-core hosts and distributed filesystems) can in fact make analysis surprisingly challenging. We present extensive measurements of memory-to-memory and disk-to-disk file transfers over 10 Gbps physical and emulated connections with 0–366 ms round trip times (RTTs). For memory-to-memory transfers, profiles of both TCP and UDT throughput as a function of RTT show concave and convex regions; large buffer sizes and more parallel flows lead to wider concave regions, which are highly desirable. TCP and UDT both also display complex throughput dynamics, as indicated by their Poincare maps and Lyapunov exponents. For disk-to-disk transfers, we determine that high throughput can be achieved via a combination of parallel I/O threads, parallel network threads, and direct I/O mode. Our measurements also show that Lustre filesystems can be mounted over long-haul connections using LNet routers, although challenges remain in jointly optimizing file I/O and transport method parameters to achieve peak throughput.

Rao, Nageswara S.↗

Deep Transfer Learning With Field-Based Measurements for Large Area Classification

Classification of Electro-Optical (EO) datasets using Deep Neural Networks (DNNs) has lead to high-performance supervised learning algorithms. However, DNNs require a large amount of labeled data for training which often have limited availability in ecological studies. Up-to-date classification of vegetation in sensitive Arctic ecosystems continue to be a challenge. In an ecosystem undergoing rapid change, capturing the dynamics of vegetation requires the existing maps of vegetation (such as Alaska Existing Vegetation Type (AKEVT), circa 2000) to be updated based on frequent field based observation of vegetation. A method is needed to transfer the knowledge gained from field-collected observations to a larger area using DNNs. Transfer learning is a machine learning technique where a model trained on one task is re-purposed on another similar task. This paper seeks to train DNNs using field-collected observations and apply transfer learning to apply the knowledge gained to update existing vegetation map at larger scale. We test two DNN methods, (1) a deep multilayer perceptron (MLP) model and (2) siamese MLP network that uses a structure to rank similarity between inputs and can be used for training datasets with few samples and show good performance with limited datasets (e.g. few-shot learning). The results show ∼90% accuracy (using the field observations for evaluation) when transfer learning is applied to a siamese network, compared to ∼45% accurate when a MLP is trained on the AKEVT and evaluated on the field observations. The approach show promise for improving and update the existing vegetation maps over large areas using limited field-based observations.

Langford, Zach↗

Flowzilla: A Methodology for Detecting Data Transfer Anomalies in Research Networks

© 2018 IEEE. Research networks are designed to support high volume scientific data transfers that span multiple network links. Like any other network, research networks experience anomalies. Anomalies are deviations from profiles of normality in a research network's traffic levels. Diagnosing anomalies is critical both for network operators and users (e.g., scientists). In this paper we present Flowzilla, a general framework for detecting and quantifying anomalies on scientific data transfers of arbitrary size. Flowzilla incorporates Random Forest Regression(RFR) for predicting the size of data transfers and utilizes an adaptive threshold mechanism for detecting outliers. Our results demonstrate that our framework achieves up to 92.5% detection accuracy. Furthermore, we are able to predict data transfer sizes up to 10 weeks after training with accuracy above 90%.

Giannakou, Anna↗

The Sensitivity Analysis of Coil Misalignment for a 200-kW Dynamic Wireless Power Transfer System with an LCC-S and LCC-P Compensation

The dynamic wireless power transfer systems may reduce the battery size of electric vehicles while maintaining the travel range. Similar to the stationary wireless power transfer systems, the compensation networks are desired in dynamic wireless charging systems at the primary and secondary sides to reduce the reactive power requirement from the source and improve the efficiency. Consequently, it is essential to understand the behavior of the compensation networks, especially the sensitivity to misalignments. This paper presents a sensitivity analysis of LCC-S and LCC-P compensation networks for a 200-kW power transfer with variations in the coupling coefficient due to the electric vehicle travel and misalignments between the pads. The sensitivity study combines the electromagnetic finite element analysis and circuit analysis to determine the impact of misalignments on the wireless power transfer system characteristics. The theoretical analysis is verified by conducting circuit simulations at discrete points to verify the accuracy of the mathematical model.

Kavimandan, Utkarsh↗

Horizontal transfer of a pathway for coumarate catabolism unexpectedly inhibits purine nucleotide biosynthesis

A microbe’s ecological niche and biotechnological utility are confirmed by its specific set of co-evolved metabolic pathways. The acquisition of new pathways, through horizontal gene transfer or genetic engineering, can have unpredictable consequences. In this work, we show that two different pathways for coumarate catabolism failed to function when initially transferred into Escherichia coli . Using laboratory evolution, we elucidated the factors limiting activity of the newly acquired pathways and the modifications required to overcome these limitations. Both pathways required host mutations to enable effective growth with coumarate, but the necessary mutations differed. In one case, a pathway intermediate inhibited purine nucleotide biosynthesis, and this inhibition was relieved by single amino acid replacements in IMP dehydrogenase. A strain that natively contains this coumarate catabolism pathway, Acinetobacter baumannii , is resistant to inhibition by the relevant intermediate, indicating that natural pathway transfers have faced and overcome similar challenges. Molecular dynamics simulation of the wild type and a representative single-residue mutant provide insight into the structural and dynamic changes that relieve inhibition. These results reflect how deleterious interactions can limit pathway transfer, that these interactions can be traced to specific molecular interactions between host and pathway, and how evolution or engineering can alleviate these limitations.

59 BASIC BIOLOGICAL SCIENCES↗

Electronic Structure and Triplet-Triplet Energy Transfer in Artificial Photosynthetic Antennas

Three Pd(II) phthalocyanine–carotenoid dyads featuring chromophores linked by amide bonds were prepared in order to investigate the rate of triplet–triplet (T-T) energy transfer from the tetrapyrrole to the covalently attached carotenoid as a function of the number of conjugated double bonds in the carotenoid. Carotenoids having 9, 10 and 11 conjugated double bonds were studied. Transient absorption measurements show that intersystem crossing in the Pd(II) phthalocyanine takes place in 10 ps in each case and that T-T energy transfer occurs in 126, 81 and 132 ps in the dyads bearing 9, 10 and 11 double bond carotenoids, respectively. To identify the origin of this variation in T-T energy transfer rates, density functional theory (DFT) was used to calculate the T-T electronic coupling in the three dyads. According to the calculations, the primary reason for the observed T-T energy transfer trend is larger T-T electronic coupling between the tetrapyrrole and the 10-double bond carotenoid. A methyl group adjacent to the amide linker that connects the Pd(II) phthalocyanine and the carotenoid in the 9 and 11-double bond carotenoids is absent in the 10-double bond carotenoid, and this difference alters its electronic structure to increase the coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of the Natural Convection Heat Transfer in a Magnesium Oxide Electrolytic Cell Concept

The rate of heat transfer by natural convection between the wall and electrolyte of an electrolytic cell that produces magnesium (Mg) from magnesium oxide (MgO) at temperatures near 1000 °C in a molten fluoride salt electrolyte is presented. An experimental model of the cell was developed that enabled measurements of the heat transfer in the absence of electrolysis and at temperatures less than 100 °C over ranges of Rayleigh numbers from 1 × 10 -7 to 7 × 10 -8 and Prandtl numbers from 2 to 6200, ranges that include those anticipated in the operation of the MgO electrolytic cell. The model avoids the substantial experimental challenges associated with the high-temperature, corrosive molten salt to enable a conservative estimate of the heat transfer at a lower cost and greater accuracy than would otherwise be possible. The results are correlated by the expression Nu = 0.412Ra 0.23 Pr 0.15 with Nusselt numbers spanning 30–80. The application of the correlation shows that the heat transfer between the cell wall and the molten fluoride electrolyte at ≈1000 °C is characterized by convection coefficients between 100 and 600 W/m 2 -K and is fast enough to enable heat fluxes up to 10 W/cm 2 without compromising the structural integrity of the steel cell wall.

Engineering↗

Wettability Effects on Falling Film Flow and Heat Transfer Over Horizontal Tubes in Jet Flow Mode

The performance of a falling-film heat exchanger is strongly linked to the surface characteristics and the heat transfer processes that take place over the tubes. The primary aim of this numerical study is to characterize the influence of surface wettability on the film flow behavior and its associated surface heat transfer in the jet-flow mode. Volume of fluid (VOF) based simulations are carried out for horizontal tubes with different surface wettabilities. The wettability of the tube surfaces is represented using the Kistler's dynamic contact angle model. Surface wettability effects ranging from superhydrophilic to superhydrophobic are studied by varying the equilibrium contact angle from 2 deg to 175 deg. Two different liquid mass flow rates of 0.06 and 0.18 kg/m-s corresponding to the inline and staggered jet flow modes are studied. Results are presented in terms of the liquid film thickness, the contact areas between the different phases (solid–liquid and liquid–air), and the heat transfer coefficient or Nusselt number. The resistance imposed by the increasing contact angles inhibits the extent of the liquid spreading over the tube surface, and this, in turn, influences the liquid film thickness, and the wetted area of the tube surface. A significant decrement in the heat transfer rate from the tube surfaces was observed as the equilibrium contact angle increased from 2 deg to 175 deg. The local distributions of the Nusselt number over the tube surface are strongly influenced by the flow recirculation in the liquid bulk.

Engineering↗

Atomic-Level, Energy-Conversion Heat Transfer

Abstract Heat is stored in quanta of kinetic and potential energies in matter. The temperature represents the equilibrium and excited occupation (boson) of these energy conditions. Temporal and spatial temperature variations and heat transfer are associated with the kinetics of these equilibrium excitations. During energy-conversion (between electron and phonon systems), the occupancies deviate from equilibria, while holding atomic-scale, inelastic spectral energy transfer kinetics. Heat transfer physics reaches nonequilibrium energy excitations and kinetics among the principal carriers, phonon, electron (and holes and ions), fluid particle, and photon. This allows atomic-level tailoring of energetic materials and energy-conversion processes and their efficiencies. For example, modern thermal-electric harvesters have transformed broad-spectrum, high-entropy heat into a narrow spectrum of low-entropy emissions to efficiently generate thermal electricity. Phonoelectricity, in contrast, intervenes before a low-entropy population of nonequilibrium optical phonons becomes a high-entropy heat. In particular, the suggested phonovoltaic cell generates phonoelectricity by employing the nonequilibrium, low-entropy, and elevated temperature optical-phonon produced population—for example, by relaxing electrons, excited by an electric field. A phonovoltaic material has an ultranarrow electronic bandgap, such that the hot optical-phonon population can relax by producing electron-hole pairs (and power) instead of multiple acoustic phonons (and entropy). Examples of these quanta and spectral heat transfer are reviewed, contemplating a prospect for education and research in this field.

Engineering↗

Experimental and Computational Heat Transfer Study of sCO 2 Single-Jet Impingement

This study experimentally and computationally investigates the heat transfer capability of supercritical carbon dioxide (sCO 2 ) single jet impingement. The evaluated jet Reynolds number range is between 80,000 and 600,000, with a nondimensional jet-to-target surface spacing of 2.8. CO 2 -impinging jet stagnation conditions were maintained at approximately 200 bar and a temperature of ∼400 °C for most experiments. The goal is to understand how changes in the aforementioned parameters influence heat transfer between the working fluid and the heated surface. Additionally, due to the elevated Reynolds numbers and difference in thermodynamic properties between air and CO 2 , air-derived impingement correlations may not be appropriate for CO 2 impingement; these correlations will be evaluated against experimental sCO 2 impingement data. At the time of this study, no sCO 2 impingement data was available relevant to sCO 2 power cycles. The target surface is a 1.5-in. diameter copper block centered on the 3 mm jet orifice. A mica heating element bolted to the bottom of the copper block provides a uniform heat flux. Thermocouples embedded in the copper block are used to determine the surface temperature. Nusselt numbers obtained from experimental sCO 2 test data are compared to area-averaged Nusselt numbers from air-derived correlations. The comparisons showed that air correlations drastically underpredict the heat transfer when sCO 2 is used as the working fluid. A modified sCO 2 correlation using experimental data at discussed conditions is derived based on an existing air correlation. A CFD study is also performed to further investigate sCO 2 heat transfer characteristics, and assess the numerical model applicability to this problem type.

42 ENGINEERING↗

Optical information transfer through random unknown diffusers using electronic encoding and diffractive decoding

Free-space optical information transfer through diffusive media is critical in many applications, such as biomedical devices and optical communication, but remains challenging due to random, unknown perturbations in the optical path. We demonstrate an optical diffractive decoder with electronic encoding to accurately transfer the optical information of interest, corresponding to, e.g., any arbitrary input object or message, through unknown random phase diffusers along the optical path. This hybrid electronic-optical model, trained using supervised learning, comprises a convolutional neural network-based electronic encoder and successive passive diffractive layers that are jointly optimized. After their joint training using deep learning, our hybrid model can transfer optical information through unknown phase diffusers, demonstrating generalization to new random diffusers never seen before. The resulting electronic-encoder and optical-decoder model was experimentally validated using a 3D-printed diffractive network that axially spans <70λ, where λ = 0.75 mm is the illumination wavelength in the terahertz spectrum, carrying the desired optical information through random unknown diffusers. The presented framework can be physically scaled to operate at different parts of the electromagnetic spectrum, without retraining its components, and would offer low-power and compact solutions for optical information transfer in free space through unknown random diffusive media.

36 MATERIALS SCIENCE↗

Direct light–induced spin transfer between different elements in a spintronic Heusler material via femtosecond laser excitation

Heusler compounds are exciting materials for future spintronics applications because they display a wide range of tunable electronic and magnetic interactions. Here, we use a femtosecond laser to directly transfer spin polarization from one element to another in a half-metallic Heusler material, Co 2 MnGe. This spin transfer initiates as soon as light is incident on the material, demonstrating spatial transfer of angular momentum between neighboring atomic sites on time scales < 10 fs. Using ultrafast high harmonic pulses to simultaneously and independently probe the magnetic state of two elements during laser excitation, we find that the magnetization of Co is enhanced, while that of Mn rapidly quenches. Density functional theory calculations show that the optical excitation directly transfers spin from one magnetic sublattice to another through preferred spin-polarized excitation pathways. This direct manipulation of spins via light provides a path toward spintronic devices that can operate on few-femtosecond or faster time scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗