Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

LEAVES: Lofted Environmental and Atmospheric Venus Sensors

LEAVES (Lofted Environmental Atmospheric Venus Sensors) is a design exercise with the goal of dramatically decreasing the cost of obtaining prioritized chemical and physical data in planetary atmospheres. Through the application of a swarm approach this concept parallelizes atmospheric exploration, with geographic coverage far exceeding what is possible with conventional monolithic platforms or sondes. Each unit in the swarm is exceptionally compact, with a powered payload mass of only a few tens of grams and a high-drag, semi-rigid structure that acts to slow each probe as it descends through the atmosphere. This structural design can collapse into a planar form to allow for efficient stowage prior to arrival at the target body. With a total per-unit mass of only 120 g, a fleet of 100 (or more) units can be very reasonably accommodated on a carrier spacecraft.Science operations, which begin when the LEAVES probes reach an altitude of 100 km, are targeted for the cloud-bearing region of Venus' atmosphere. During the roughly 9 hour, terminal velocity descent through the atmosphere, LEAVES collects data of the state and composition of the atmosphere in parallel across multiple units. These data would represent an unprecedented constraint on the distribution and concentration of targeted chemical species, and the detection of local and regional variations in both chemistry and physical properties.A novel and compelling result of this exercise was that the same optimization that produced a structure with an exceptionally low areal mass density (0.126 kg/m2) also resulted in a probe that can be deployed directly from an aerobraking orbit (~140 km at 5 km/s) without the need for aeroshell protection. This translates to a tremendous mass savings and gives LEAVES the flexibility to be carried as a secondary payload aboard either a descending surface probe or an orbital radar mapper. Because such missions are under active development or have already been proposed (but not flown), we infer that LEAVES is well positioned as a technology

Swarm↗

The investigation of time dependent flame structure by ionization probes

Ionization probes were used to measure mean ionization current and frequency spectra, auto-correlations and cross-correlations in jet flames with variation in the initial Reynolds numbers and equivalence ratios. Special attention was paid to the transitional region between the burner exit plane and the plane of onset of turbulence.

Ventura, J. M. P.↗

Post-Viking models for the structure of the summer atmosphere of Mars

A model for the Mars atmosphere up to 100 km altitude and between the 60 deg latitudes is presented. Seasonal variations are considered as induced by variations in surface temperature, using data supplied by the Viking lander and Mars 6 probe. The temperature profile is provided in 2 km intervals, noting a large temperature gradient in the first 2.5 km above the surface in wintertime. An average summer pressure is calculated at 7.3 mb with a variance of about 0.5. Viking spectrometer readings indicated a 0.995 mole fraction CO2 atmosphere with a mean molecular weight of 43.49. Gravitational acceleration is determined to vary from 3.73-3.19 m/sec sq in going from surface to 100 km, and atmospheric pressure is shown to vary by 5 orders of magnitude in the same interval. Finally, the thermal tides induced by the expansion and contraction cycle in the atmosphere near the surface are described.

Seiff, A.↗

The Quasi-biennial Oscillation and Annual Variations in Tropical Ozone from SHADOZ and HALOE

We examine the tropical ozone mixing ratio perturbation fields generated from a monthly ozone climatology using 1998 to 2006 ozonesonde data from the Southern Hemisphere Additional Ozonesondes (SHADOZ) network and the 13-year satellite record from 1993 to 2005 obtained from the Halogen Occultation Experiment (HALOE). The long time series and high vertical resolution of the ozone and temperature profiles from the SHADOZ sondes coupled with good tropical coverage north and south of the equator gives a detailed picture of the ozone structure in the lowermost stratosphere down through the tropopause where the picture obtained from HALOE measurements is blurred by coarse vertical resolution. Ozone perturbations respond to annual variations in the Brewer-Dobson Circulation (BDC) in the region just above the cold-point tropopause to around 20 km. Annual cycles in ozone and temperature are well correlated. Above 20 km, ozone and temperature perturbations are dominated by the Quasi-biennial Oscillation (QBO). Both satellite and sonde records show good agreement between positive and negative ozone mixing ratio anomalies and alternating QBO westerly and easterly wind shears from the Singapore rawinsondes with a mean periodicity of 26 months for SHADOZ and 25 months for HALOE. There is a temporal offset of one to three months with the QBO wind shear ahead of the ozone anomaly field. The meridional length scales for the annual cycle and the QBO, obtained using the temperature anomalies and wind shears in the thermal wind equation, compare well with theoretical calculations.

Witte, J. C.↗

Temporal and spatial variations in the Io torus

Spectroscopic measurements of lines from both forbidden S II and forbidden O II in the Io torus taken on 15 nights spread over four months in 1981 are presented and discussed. An east-west asymmetry was observed in the optical emissions, showing larger western intensities and a more diffuse and radially extensive nebula to the east. Two configurations of forbidden S II longitudinal asymmetry were stable over at least four days. Longitudinal structure was not detected in either the forbidden O II intensity or the plasma density as measured by the forbidden O II and S II doublet ratios. A radial variation in the ratio of O II/S II was observed, with the ratio being largest near Io's orbit. Monthly variability was detected in both the intensity and density of the torus.

Morgan, J. S.↗

On the changes in the physical properties of the ionized region around the Weigelt structures in n Carinae over the 5.54-yr spectroscopic cycle

We present HST/STIS observations and analysis of two prominent nebular structures around the central source of η Carinae, the knots C and D. The former is brighter than the latter for emission lines from intermediate or high ionization potential ions. The brightness of lines from intermediate and high ionization potential ions significantly decreases at phases around periastron. We do not see conspicuous changes in the brightness of lines from low ionization potential (<13.6 eV) ions over the orbital period. Line ratios suggest that the total extinction towards the Weigelt structures is AV=2.0. Weigelt C and D are characterized by an electron density o f10(exp 6.9)/cu.cm that does not significantly change throughout the orbital cycle. The electron temperature varies from 5500K (around periastron) to 7200K (around apastron). The relative changes in the brightness of He I lines are well reproduced by the variations in the electron temperature alone. We found that, at phases around periastron, the electron temperature seems to be higher for Weigelt C than that of D. The Weigelt structures are located close to the Homunculus equatorial plane, at a distance of about 1240 AU from the central source. From the analysis of proper motion and age, the Weigelt complex can be associated with the equatorial structure called ‘Butterfly Nebula’ surrounding the central binary system.

M. Teodoro↗

A Compendium of Wind Statistics and Models for the NASA Space Shuttle and Other Aerospace Vehicle Programs

The wind profile with all of its variations with respect to altitude has been, is now, and will continue to be important for aerospace vehicle design and operations. Wind profile databases and models are used for the vehicle ascent flight design for structural wind loading, flight control systems, performance analysis, and launch operations. This report presents the evolution of wind statistics and wind models from the empirical scalar wind profile model established for the Saturn Program through the development of the vector wind profile model used for the Space Shuttle design to the variations of this wind modeling concept for the X-33 program. Because wind is a vector quantity, the vector wind models use the rigorous mathematical probability properties of the multivariate normal probability distribution. When the vehicle ascent steering commands (ascent guidance) are wind biased to the wind profile measured on the day-of-launch, ascent structural wind loads are reduced and launch probability is increased. This wind load alleviation technique is recommended in the initial phase of vehicle development. The vehicle must fly through the largest load allowable versus altitude to achieve its mission. The Gumbel extreme value probability distribution is used to obtain the probability of exceeding (or not exceeding) the load allowable. The time conditional probability function is derived from the Gumbel bivariate extreme value distribution. This time conditional function is used for calculation of wind loads persistence increments using 3.5-hour Jimsphere wind pairs. These increments are used to protect the commit-to-launch decision. Other topics presented include the Shuttle Shuttle load-response to smoothed wind profiles, a new gust model, and advancements in wind profile measuring systems. From the lessons learned and knowledge gained from past vehicle programs, the development of future launch vehicles can be accelerated. However, new vehicle programs by their very nature will require specialized support for new databases and analyses for wind, atmospheric parameters (pressure, temperature, and density versus altitude), and weather. It is for this reason that project managers are encouraged to collaborate with natural environment specialists early in the conceptual design phase. Such action will give the lead time necessary to meet the natural environment design and operational requirements, and thus, reduce development costs.

Smith, O. E.↗

The GOAL-to-HAL/S translator specification

The specification sets forth a technical framework within which to deal with the transfer of specific GOAL features to HAL/S. Key technical features of the translator are described which communicate with the data bank, handle repeat statements, and deal with software interrupts. GOAL programs, databank information, and GOAL system subroutines are integrated into one GOAL in HAL/S. This output is fully compatible HAL/S source ready for insertion into the HAL/S compiler. The Translator uses a PASS1 to establish all the global data needed for the HAL/S output program. Individual GOAL statements are translated in PASS2. The specification document makes extensive use of flowcharts to specify exactly how each variation of each GOAL statement is to be translated. The specification also deals with definitions and assumptions, executive support structure and implementation. An appendix, entitled GOAL-to-HAL Mapping, provides examples of translated GOAL statements.

Stanten, S. F.↗

The structure of the lunar crust at the Apollo 17 site

A seismic profiling experiment was successfully executed on the lunar surface during the Apollo 17 mission allowing a determination of the structure of the lunar crust to a depth of several kilometers. The most outstanding feature of the seismic velocity variation, in the Taurus-Littrow region, is the stepwise increase with depth. A total thickness of about 1200 meters for the infilling mare basalts at the 17 landing site is also indicated from the seismic results. The apparent velocity is high (about 4 km/sec for P waves) in the material below the basalts.

Kovach, R. L.↗

The energy spectrum of the Perseus cluster of galaxies

A one-dimensional focusing X-ray telescope has been used to measure the spatial structure and energy spectrum of the Perseus cluster in the 0.5-4.5 keV X-ray range. A significant variation is observed in the X-ray spectrum from different regions of the cluster, indicating different possible emission mechanisms. The spectrum from the region centered on NGC 1275 appears harder and more cut off at low energy than that of the remainder of the cluster.

Wolff, R. S.↗

X-ray bursts from MXB 1837+05

Results are reported for SAS 3 observations of 22 bursts from the X-ray source designated MXB 1837+05. Assuming that all the bursts come from one source, the source position is determined to be right ascension (1950) 18 hr 37.9 min, declination (1950) 5 deg 4.2 min. Integrated burst intensities are listed along with ratios of counts in different energy channels, and it is found that there are significant variations in these ratios from burst to burst. The bursts are also shown to exhibit a variety of temporal structures (including double peaks) and changes in spectral hardness. No regularity was detected in the burst occurrence times during one observing period, but four bursts during another period seemed to recur at regular intervals of about 6.3 hr. It is concluded that an intensity-interval correlation similar to that for a rapid burster does not exist for MXB 1837+05 and that this source is probably identical with the relatively strong and steady source Ser X.1.

Li, F. K.↗

Wind induced composition effects at high latitudes

The temperature and compositional structure of the upper atmosphere are discussed in relation to the impacts of wind-induced diffusion processes. Seasonal variations in thermospheric temperature and composition are explained by energy and mass transport from the summer to the winter hemisphere induced by preferential heating, with the winter oxygen bulge participating in a feedback mechanism which acts to dampen wind velocities and increase temperature contrast. Changes in the eddy diffusion coefficient are considered as a complementary mechanism of producing the seasonal anomalies. The role of winds induced by high-latitude heating by particles and Joule dissipation during magnetic storms and substorms in accounting for thermospheric density increases and N2 and Ar enhancements and O and He depletions at high latitudes are discussed, and the rather weak compositional signature of E x B momentum coupling is distinguished from the effects of Joule dissipation.

Mayr, H. G.↗

Design considerations and experiences in the use of composite material for an aeroelastic research wing

Experiences in using composite skin material on an aeroelastic research wing used in flight flutter testing are described. Significant variations in skin shear modulus due to stress and temperature were encountered with the original fiberglass laminate skin designed to minimize wing torsional stiffness. These variations along with the sensitivity of wing torsional stiffness to the skin-to-frame attachment method complicated the structural model vibration mode predictions. A wing skin redesign with different fiber orientation and a reduction in the amount of skin-to-frame bonding resulted in more predictable modal characteristics without sacrificing design objectives. Design and modeling considerations for future applications are discussed.

Eckstrom, C. V.↗

LANDSAT-D investigations in snow hydrology

Thematic mapper data for the southern Sierra Nevada area were registered to digital topographic data and compared to LANDSAT MSS and NOAA-7 AVHRR data of snow covered areas in order to determine the errors associated with using coarser resolution and to qualify the information lost when high resolution data are not available. Both the zenith and the azimuth variations in the radiative field are considered in an atmospheric radiative transfer model which deals with a plane parallel structured atmosphere composed of different layers, each assumed to be homogeneous in composition and to have a linear in tau temperature profile. Astronomical parameters for each layer are Earth-Sun distance and solar flux at the top of the atmosphere. Atmospheric parameters include pressure temperature, chemical composition of the air molecules, and the composition and size of the aerosol, water droplets, and ice crystals. Outputs of the model are the monochromatic radiance and irradiance at each level. The use of the model in atmospheric correction of remotely sensed data is discussed.

Dozier, J.↗

Observation of reconnection phenomena at synchronous orbit

SCATHA satellite observations of large-amplitude magnetic field oscillations in the magnetosheath and in the associated plasma are studied. Large-amplitude variations in the magnetosheath magnetic field intensity with a quasi-period of 10 s were observed. Nearly static structures of high-beta plasma associated with the magnetic field minima and low-beta plasma associated with the magnetic field maxima were observed convecting toward the earth. The morphology of charged particle data for the transition between the magnetosphere and the magnetosheath for a northward magnetosheath magnetic field is presented. A convection electric field of about 9 mV/m was inferred from the spectral difference between solar and antisolar drifting ions in the magnetosheath near a magnetopause rotational discontinuity. A trapped component was observed in the magnetosheath plasma during both northward and southward magnetosheath magnetic fields. It is concluded that flux transfer events arise from the interaction of the earthward convecting plasma filaments with the magnetospheric magnetic field at the magnetopause.

Croley, D. R., Jr.↗

Plasma and field observations of a Pc 5 wave event

The particle detector and electric field data collected by the Dynamo Explorer 1 on the Pc 5 wave event encounter on July 14, 1982 are presented, yielding a nearly complete picture of the event. The overall structure of the Pc 5 seems to order the event into two distinct halves, suggesting a temporal or spatial variation of the micropulsation. Thermal plasma measurements showed that the dominant ion throughout both lobes was H(+). Significant quantities of He(+), O(+), N(+), and O(2+) were also observed to be present and rotating together in a plane normal to the magnetic field direction, due to the Pc5 E x B drift. The plasma parameters determined for the two lobes were used in theoretical calculations to predict the period of the observed resonance.

Waite, J. H.↗

Structureborne noise measurements on a small twin-engine aircraft

Structureborne noise measurements performed on a twin-engine aircraft (Beechcraft Baron) are reported. There are two overall objectives of the test program. The first is to obtain data to support the development of analytical models of the wing and fuselage, while the second is to evaluate effects of structural parameters on cabin noise. Measurements performed include structural and acoustic responses to impact excitation, structural and acoustic loss factors, and modal parameters of the wing. Path alterations include added mass to simulate fuel, variations in torque of bolts joining wing and fuselage, and increased acoustic absorption. Conclusions drawn regarding these measurements are presented.

Cole, J. E., III↗

Reuse at the Software Productivity Consortium

The Software Productivity Consortium is sponsored by 14 aerospace companies as a developer of software engineering methods and tools. Software reuse and prototyping are currently the major emphasis areas. The Methodology and Measurement Project in the Software Technology Exploration Division has developed some concepts for reuse which they intend to develop into a synthesis process. They have identified two approaches to software reuse: opportunistic and systematic. The assumptions underlying the systematic approach, phrased as hypotheses, are the following: the redevelopment hypothesis, i.e., software developers solve the same problems repeatedly; the oracle hypothesis, i.e., developers are able to predict variations from one redevelopment to others; and the organizational hypothesis, i.e., software must be organized according to behavior and structure to take advantage of the predictions that the developers make. The conceptual basis for reuse includes: program families, information hiding, abstract interfaces, uses and information hiding hierarchies, and process structure. The primary reusable software characteristics are black-box descriptions, structural descriptions, and composition and decomposition based on program families. Automated support can be provided for systematic reuse, and the Consortium is developing a prototype reuse library and guidebook. The software synthesis process that the Consortium is aiming toward includes modeling, refinement, prototyping, reuse, assessment, and new construction.

Weiss, David M.↗