Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEA LEVEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Optimization of engines for a commercial Mach 0.85 transport using advanced turbine cooling methods

A parametric study was made of a group of separate-flow-turbofan engines for use in advanced technology airplanes designed for a cruise Mach number of 0.85 at 40,000 feet. The three-engined airplanes were sized to carry 200 passengers 3000 nautical miles. Supercritical aerodynamics were assumed. Film-cooled turbines were used and sea-level-static turbine-rotor-inlet temperature was always 2600 F. The optimum cycle depends on the noise goal assumed. Without a noise goal the best fan pressure ratio (FPR) is about 1.90. At noise goals of FAR 36, -10 EPNdb, and -20 EPNdb, the best FPR's are 1.85, 1.76, and 1.70, respectively, at cruise. The take-off FPR's are progressively less than the cruise value as the noise goal approaches -20 EPNdb. The penalties in take-off gross weight incurred were 8.5, 19, and 64 percent at goals of FAR 36, -10 EPNdb, and -20 EPNdb, respectively.

Kraft, G. A.↗

Use of altimetry data in a sampling-function approach to the geoid

Problems associated with using an altimetry sampling function approach to the geoid are examined. They include: (1) conventent mathematical representation of short-wavelength (eventually approximately 1 deg) features of the geoid or geopotential, (2) utilization of detailed data from only part of the globe (i.e., the oceans) (3) application of appropriate formalism to relate the sea-level equipotential below the atmospheric mass to the external potential above the atmosphere, (4) mathematical applicability of an adopted geopotential representation on the surface of the physical geoid.

Lundquist, C. A.↗

Error analysis of earth physics satellite systems

Error analysis of distant-satellite-to-close-satellite range-rate, satellite-to-sea altimetry, and ground station to satellite range are made by simulations in which observational variances are assumed, observation equations are formed, and normal equations incremented. The final normal equation matrix is inverted to obtain standard deviations and correlation coefficients. The natural parameters solved for are the broad variations of the gravity field, represented by harmonic coefficients; local variations of gravity, represented by point masses; and the departure of the sea level from the geoid, represented by area means. A standard case of a low (263 km) polar close satellite, three equatorial geosynchronous satellites, and eight ground tracking stations is set up.

Kaula, W. M.↗

Measurement of gaseous emissions from an afterburning turbojet engine at simulated altitude conditions

Gaseous emissions from a J85-GE-13 turbojet engine were measured over a range of fuel-air ratios from idle to full afterburning and simulated altitudes from near sea-level to 12,800 meters (42,000 ft). Without afterburning, carbon monoxide and unburned hydrocarbon emissions were highest at idle and lowest at takeoff; oxides of nitrogen exhibited the reverse trend. With afterburning, carbon monoxide and unburned hydrocarbon emissions were greater than for military power. Carbon monoxide emissions were altitude dependent. Oxides of nitrogen emissions were less at minimum afterburning than at military power. For power levels above minimum afterburning, the oxides of nitrogen emissions were both power level and altitude dependent.

Diehl, L. A.↗

Experimental test results of a generalized parameter fuel control

Considerable interest has been generated recently in low cost jet propulsion systems. One of the more complicated components of jet engines is the fuel control. Results of an effort to develop a simpler hydromechanical fuel control are presented. This prototype fuel control was installed on a J85-GE-13 jet engine. Results show that the fuel control provided satisfactory engine performance at sea level static conditions over its normal nonafterburning operating range, including startup. Results of both bench and engine tests are presented; the difficulties encountered are described.

Batterton, P. G.↗

Study of dual-channel infrared spectroradiometer systems

A dual channel infrared spectroradiometer system was installed at a high altitude facility where spectral data were obtained from F2/H2, FLOX/CH4, FLOX/B2H6, OF2/CH4, and OF2/B2H6 propellant combinations. A good HF emission spectra was obtained for tests with the OF2B2H6 propellant combination. Subsequently, data were obtained on the LOX/GH2 propellant combination at sea level and altitude conditions that were inconsistent because the calculation of plume properties led to physically unrealistic results. The inconsistencies resulted from measurement accuracy not being within the narrow limits required by the data reduction scheme. Although the anticipated program results were not obtained, the data gathered are useful for guiding future experimental efforts and formulations of less sensitive analytical models.

Wrubel, J. A.↗

Observations of disk-shaped bodies in free flight at terminal velocity

Ten disk-shaped models of a proposed nuclear heat source module were released from an aircraft and observed by radar. The initial launch attitude, spin rate, and mass of the models were varied. Significant differences were observed in the mode of flight and terminal velocity among models of different mass and launch attitudes. The data were analyzed to yield lift and drag coefficients as a function of Reynolds number. The total sea-level velocity of the models was found to be well correlated as a function of mass per unit frontal area. The demonstrated terminal velocity of the modular disk heat source, about 27 m/sec for this specific design, is only 33% of that of existing heat source designs.

Vorreiter, J. W.↗

Full scale hover test of a 25 foot tilt rotor

The tilt rotor underwent a hover performance test on the Aero Propulsion Laboratory whirl stand at Wright-Patterson Air Force Base. The maximum thrust over density ratio measured at the design tip speed of 740 feet per second was 10,016 pounds. This occurred when the power over density ratio was 1721 horsepower. At the hover overspeed rpm, the thrust and power, over density ratio, were 11,008 pounds and 1866 horsepower. During the test, the maximum measured thrust coefficient was 0.177, and the rotor figure of merit exceeded 0.81. Measured lifting efficiency was 8.35 pounds per horsepower at the thrust a 13,000-pound aircraft would require for hover at sea level on a standard day. No effect of compressibility on performance is discernible in the test results (the range of tip Mach numbers tested was 0.55 to 0.71).

Helf, S.↗

Radial gradients of galactic cosmic ray protons and helium nuclei

Variation of the cosmic ray intensity as a function away from the sun and its radial derivative is studied by plotting satellite cosmic ray measurements against sea level neutron monitor data. Results show that the solar modulation cavity extends well beyond 2 AU and that irregularities in the sun's magnetic field are carried outward radially by the solar wind, thus sweeping low energy cosmic rays out of the solar system and at the same time cooling cosmic rays reaching the earth.

Teegarden, B. J.↗

Atmospheric windows for HF laser radiation between 2.7 and 3.2 microns.

A high resolution computer model study of the atmospheric transmittance in the 2.7 to 3.2 micron region of the spectrum is described, whose purpose was to identify atmospheric windows for the HF laser wavelengths available in this region. Three HF lines corresponding to the transitions P(12), 1 to 0, P(6), 3 to 2, and P(4), 5 to 4 are identified as having transmittances of 0.70 or greater over a 1-km sea level path.

Seals, R. K., Jr.↗

Comparison of vertical profile turbulence structure with stellar observations.

Vertical profiles of microthermal turbulence structure have been obtained from balloon flights to altitudes near 25 km above mean sea level. Comparison of the observed turbulence structure with meteorological data and simultaneously acquired stellar scintillation data has been successful. For this comparison integrals over the observed turbulence structure were computed as required by theory. Turbulence and wind velocity data were also employed to successfully predict stellar irradiance spectra.

Bufton, J. L.↗

Experimental evaluation of a 600 lbf spacecraft rocket engine.

Experimental results are presented for a long-duration-capability (1000-sec), space-storable, bipropellant liquid rocket motor burning fluorine/hydrazine or FLOX/monomethylhydrazine. The interrelationship between injected mixture ratio and the per cent film cooling on vacuum specific impulse performance and chamber heat transfer is given. Experimental sea level measurements are used to predict space vacuum performance based upon simplified JANNAF reference procedures. Dynamic combustion stability is demonstrated over a wide range of operating conditions. Analytical results of char penetration, erosion, and ablative wall temperature distributions are presented for prototype chamber designs.

Hoehn, F. W.↗

Correlation of microthermal turbulence data with meteorological soundings in the troposphere.

Recent measurements of vertical profiles of microthermal turbulence structure are reported. Data obtained by balloon-borne temperature sensors are presented in terms of the temperature structure coefficient. Free-floating balloon flights allowed this type of measurement to be extended to an altitude of 15 km above sea level. This series of flights was accompanied by vertical profiles of wind speed and temperature that permitted calculation of wind shear and gradient Richardson number profiles. The observed correlations found to exist between microthermal turbulence layers and the standard meteorological data are discussed briefly in light of the theory.

Bufton, J. L.↗

Calcified proteins in the sedimentary environment.

Amino acid diagenesis is considered in relatively young fossil mollusk shells which are capable of preserving some of their original organic constituents. The rate of change of amino acid content in fossils is related to time and diagenetic temperature. Thus, the amino acid content provides information relating to the approximate ages of shells. Pleistocene temperatures and sea level changes in Florida are discussed, along with stratification correlation.

Mitterer, R. M.↗

Comparison of vertical profile turbulence structure with stellar observations.

Vertical profiles of microthermal turbulence structure have been obtained from balloon flights to altitudes near 25 km above mean sea level. Comparison of the observed turbulence structure with meteorological data and simultaneously acquired stellar scintillation data has been successful. For this comparison integrals over the observed turbulence structure were computed as required by theory. Turbulence and wind velocity data were also employed to predict successfully stellar irradiance spectra.

Bufton, J. L.↗

Atmosphere-entry behavior of a modular, disk-shaped, isotope heat source.

The authors have studied the entry and impact behavior of an isotope heat source for space nuclear power that disassembles into a number of modules which would enter the earth's atmosphere separately if a flight aborted. These modules are disk-shaped units, each with its own reentry heat shield and protective impact container. In normal operation, the disk modules are stacked inside the generator, but during a reentry abort they separate and fly as individual units of low ballistic coefficient. Flight tests at hypersonic speeds have confirmed that a stack of disks will separate and assume a flat-forward mode of flight. Free-fall tests of single disks have demonstrated a nominal impact velocity of 30 m/sec at sea level for a practical range of ballistic coefficients.

Vorreiter, J. W.↗

The effect of water injection on nitric oxide emissions of a gas turbine combustor burning ASTM Jet-A fuel

Tests were conducted to determine the effect of water injection on oxides of nitrogen (NOx) emissions of a full annular, ram induction gas turbine combustor burning ASTM Jet-A fuel. The combustor was operated at conditions simulating sea-level takeoff and cruise conditions. Water at ambient temperature was injected into the combustor primary zone at water-fuel ratios up to 2. At an inlet-air temperature of 589 K (600 F) water injection decreased the NOx emission index at a constant exponential rate: NOx = NOx (o) e to the -15 W/F power (where W/F is the water-fuel ratio and NOx(o) indicates the value with no injection). The effect of increasing combustor inlet-air temperature was to decrease the effect of the water injection. Other operating variables such as pressure and reference Mach number did not appear to significantly affect the percent reduction in NOx. Smoke emissions were found to decrease with increasing water injection.

Marchionna, N. R.↗

Atmospheric composition

The earth's atmosphere is made up of a number of gases in different relative amounts. Near sea level and up to about 90 km, the amount of these atmospheric gases in clean, relatively dry air is practically constant. Four of these gases, nitrogen, oxygen, argon, and carbon dioxide, make up 99.99 percent by volume of the atmosphere. Two gases, ozone and water vapor, change in relative amounts, but the total amount of these two is very small compared to the amount of the other gases. The atmospheric composition shown in a table can be considered valid up to 90 km geometric altitude. Above 90 km, mainly because of molecular dissociation and diffusive separation, the composition changes.

Daniels, G. E.↗