Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Pacific area data collection stations

The installation of environmental data collection systems at several remotely located sites in islands in the Pacific Ocean is summarized. The effort was designed to enhance the ability to collect hydrological information. The data collection station consists of a data acquisition system for handling data, a transmitter for uplinking information to the GOES-W geostationary satellite, and a variety of environmental sensors for data accumulation. Each system was assembled, tested, and deployed on designated islands. The concept of using microprocessors for handling data at remote sites and relaying it via a satellite link is a cost effective approach. Such systems require high reliability and proven performance in the field.

Rector, R. C.↗
NASA NTRS1981

The early 1981 view of Landsat-D progress

The thematic mapper (TM) will provide a spatial resolution (30 m) higher than the radiometric observations provided from Landsats 1 through 3 (80 m); what is more, observations in new spectral bands (0.45 to 0.52, 1.55 to 1.75, and 2.08 to 2.35 microns) will be available. These characteristics will aid in identifying and assessing the acreage and condition of crops. Further advantages will be offered in mineral exploration and land resource assessment. In describing the flight segment, it is noted that the high-gain antenna (diameter, 6 ft) will be used to communicate with the Tracking and Data Relay Satellite System in the Ku-band (15 GHz). Direct transmission of TM data will be provided by the X-band antenna. The MSS data will be transmitted directly to foreign stations by the S-band antenna. A figure describing the Multimission Modular spacecraft is included.

Salomonson, V. V.↗
NASA NTRS1983

Galileo mission overview

The Galileo mission has three major and equally important scientific objectives: the investigation of the chemical composition and physical state of the Jupiter atmosphere, the study of the composition and state of the Jovian satellites, and the probing of the structure and physical dynamics of the Jovian magnetosphere. The Galileo spacecraft comprises an Orbiter and an atmospheric entry Probe, which will be released on a ballistic entry trajectory from the Orbiter about 150 days before Jupiter arrival. After Probe release, the Orbiter will overfly the Probe during entry in order to relay its data to earth. The Orbiter will then insert itself into a 200-day orbit around Jupiter. Attention is given to the radio science, remote sensing and fields and particles instruments to be carried for the mission.

Oneil, W. J.↗
NASA NTRS1983

Galileo atmospheric entry probe mission description

The mission goals, control parameters, and instrumentation for the Galileo entry probe are described. The goal for the probe is to penetrate the Jovian atmosphere to 10 bars, begin data gathering and transmission at about 0.1 bar, and make as many in-situ cloud measurements as possible. The probe will pass through a 16,000 K shock layer, which has led to a ratio of 5 kg of heat shield to every kg of instrumentation on the probe. An entry angle between -7.0 to -10.2 deg will be used, and possible targets with respect to declinations associated with a 1986 launch are discussed. The preentry mission phase, entry/descent sequence, and the baseline mission relay link performance are outlined. Data may be available down to 20 bars, and the probe performance will aid in design goals for subsequent Saturn and Uranus probes.

Vojvodich, N. S.↗
NASA NTRS1983

Galileo 1986 on Centaur

The mission, flight profile, instrumentation, and developmental program for the Galileo Jupiter probe, scheduled for Shuttle launch in 1986, are discussed. Gravity assists from each Galilean satellite at spacecraft periapsis will be used in order to configure for approaching the next satellite after a swingby past Jupiter. The process will continue for twenty months, and will yield data on the Jovian magnetosphere and tail, as well as on the satellites. A probe will be released 150 days from Jupiter orbit, followed by a course adjustment for the main instrumentation payload. The dual-spin spacecraft will proceed on its mission and act as a relay for the atmospheric entry probe, which is expected to broadcast data for one hour. Instrumentation on the Galileo will perform imaging, IR and UV spectrometry, radiometry, magnetometry, particle and dust detection, as well as plasma measurements, and celestial mechanics and radio propagation experiments. The direct trajectory to Jupiter, including a plane change maneuver, will be powered by a Centaur upper stage, and will encompass a journey taking over two years. The key constraints on the satellite tour are propellant and radiation tolerance.

Diaz, A.↗
NASA NTRS1983

Aeroelastic considerations for continuous patrol/high altitude surveillance platforms

For the last several years, an investigation has been conducted regarding the feasibility of unmanned, airborne, High-Altitude Powered Platforms (HAPP), and High Surveillance Platforms for Over-the-Horizon Targeting (HI-SPOT). These airborne platforms have been proposed as a means of achieving a continuous regional communication-relay or for continuous regional surveillance for use in agricultural research or military applications, i.e., fleet support. These platforms would offer improvements over existing orbiting satellites. These improvements are related to better resolution and increased mission flexibility. The required mission endurance up to six months, would be obtained through the use of either solar power, a cryogenically fueled engine, or microwave-power. Attention is given to airborne platform configuration, structure, structural and aerodynamic modeling, modal analysis, and flutter analysis.

Turner, C. D.↗
NASA NTRS1982

Good imaging with very fast paraboloidal primaries - An optical solution and some applications

Attention is given to the imaging performance improvement obtainable in telescopes with fast parabolic primaries by means of two-mirror correctors of the Paul-Baker type. Images with 80 percent of the energy concentrated within 0.2 arcsec are projected for an f/1 primary relaying to an f/2 final focus, over a 1 deg-diameter field. It is noted that the mechanical structure and enclosure of a large telescope built with these fast optics should be significantly smaller and less expensive than those for conventional optics. The application of the Paul-Baker corrector system is explored for such diverse telescope types as those employing six off-axis primary mirrors, UV astronomy telescopes with no chromatic aberration, a low emissivity IR astronomy instrument with an off-axis f/1 parent primary mirror part, and thin rectangular aperture telescopes which are useful for spectroscopy and photometry.

Angel, J. R. P.↗
NASA NTRS1982

Approaches to environmental verification of STS free-flier and pallet payloads

This paper presents an overview of the environmental verification programs followed on an STS-launched free-flier payload, using the Tracking and Data Relay Satellite (TDRS) as an example, and a pallet payload, using the Office of Space Sciences-1 (OSS-1) as an example. Differences are assessed and rationale given as to why the differing programs were used on the two example payloads. It is concluded that the differences between the programs are due to inherent differences in the payload configuration, their respective mission performance objectives and their operational scenarios rather than to any generic distinctions that differentiate between a free-flier and a pallet payload.

Keegan, W. B.↗
NASA NTRS1982

Space telescope low scattered light camera - A model

A design approach for a camera to be used with the space telescope is given. Camera optics relay the system pupil onto an annular Gaussian ring apodizing mask to control scattered light. One and two dimensional models of ripple on the primary mirror were calculated. Scattered light calculations using ripple amplitudes between wavelength/20 wavelength/200 with spatial correlations of the ripple across the primary mirror between 0.2 and 2.0 centimeters indicate that the detection of an object a billion times fainter than a bright source in the field is possible. Detection of a Jovian type planet in orbit about alpha Centauri with a camera on the space telescope may be possible.

Breckinridge, J. B.↗
NASA NTRS1983

Design study for remotely piloted, high-altitude airplanes powered by microwave energy

A design study has been conducted for unmanned, microwave-powered airplanes that must fly with long endurance at high altitude. They are proposed to conduct communications-relay, observation, or various scientific missions above approximately 55,000 feet altitude. The special characteristics of the microwave-power system and high-altitude, low-speed vehicle are reviewed. Examples of both sizing and performance analysis are used to suggest design procedure guidelines.

Morris, C. E. K., Jr.↗
NASA NTRS1983

Return to Jupiter - Project Galileo

The mission profile, instrumentation, and mission objectives of the Galileo probe are described. Scheduled for Shuttle launch in 1986, with a boost from the Centaur upper stage, the probe will require over 2 yr to reach the Jovian system. An atmospheric entry probe will be released during Jupiter approach, and the orbiting module will relay the temperature, pressure, radio signals, spectroscopy, magnetometry, and particle counts, originating from the parachuting probe. The orbiting module will then continue on to a series of flybys and orbits around the Jovian moons by using a gravity assist from Jupiter after each pass of a moon. The orbiter will record spectrometric, radiometric, dust, visual, magnetic, and radio propagation data. The television camera is a CCD device with 640,000 diodes forming an 800 x 800 array in one square centimeter.

Johnson, T. V.↗
NASA NTRS1982

Landsat-D, about to be reality

The space and ground segments of the Landsat-D thematic mapper (TM) for remote sensing of a 185 km swath with 30 m resolution are described. Scanning the full earth once every 16 days from its 705 km sunsynchronous orbit, Landsat-D will relay its data on the ku-band through the TDRSS satellite to a ground station. The X-band will also be used to transmit data directly to foreign and domestic ground stations; the S-band will be reserved for MSS data only. Landsat-D comprises the multimission modular spacecraft and the instrument module, which features the MSS and TM, a wideband communication subsystem, a solar array, and an L-band global positioning system. Three computers on the ground provide a high degree of automation for reception, storage, retrieval, back-up, and transmission of data and commands. Additionally, a van is equipped with transportable equipment, including an antenna. Procedures followed for image generation from the MSS and TM are detailed, noting storage at Goddard until dispersal of tapes under the direction of the EROS data center.

Aepli, T. C.↗
NASA NTRS1983

Spaceborne SAR sensor architecture

Spaceborne imaging radars for the decade of the '90s will be called upon to provide increased illumination parameter flexibility, polar orbital coverage, and to operate from the same platform with other advanced sensors such as multilinear arrays. The potential information content in accurately merged microwave infrared, or microwave visible images is enormous by comparison to either radar images alone or visible/infrared images alone, since microwave images are principally responsive to surface geometry whereas visible/infrared images are highly sensitive to surface chemistry. A strawman system concept in which a SAR and multilinear array (MLA) are flown on a polar orbiting free flyer at 800 km altitude is discussed. Data would be relayed to ground via the TDRSS (or equivalent).

Carver, K. R.↗
NASA NTRS1983

An Attached Payload Operations Center (APOC) at the Goddard Space Flight Center (GSFC), volume 2

An overview of the APOC is given. For Spacelab payloads channel 2 and 3 data are input via a Statistical Multiplexer (SM) to the various SIPS functions. These include recording of the data on High Density Recorders (HDR), DQM and demultiplexing of the composite data stream by the High Rate Demultiplexer (HRDM). This system performs the inverse functions of the onboard Spacelab High Rate Multiplexer (HRM) enabling access to the data streams as multiplexed onboard the Spacelab. The contents and characteristics of channels one, two and three data as downlinked by the Tracking and Data Relay Satellite System (TDRSS) ku-band are given.

Source record↗
NASA NTRS1983

Effects of systematic errors on the mixing ratios of trace gases obtained from occulation spectra

The influence of systematic errors in the parameters of the models describing the geometry and the atmosphere on the profiles of trace gases retrieved from simulated solar occultation spectra, collected at satellite altitudes, is investigated. Because of smearing effects and other uncertainties, it may be preferable to calibrate the spectra internally by measuring absorption lines of an atmospheric gas such as CO2 whose vertical distribution is assumed rather than to relay on externally supplied information.

Shaffer, W. A.↗
NASA NTRS1984

Spaceborne Gravity Gradiometers. Part 2: Role of gravity gradiometers in NASA's programs

Sources of information for present knowledge of Earth's gravitational field are discussed as well as the Goddard Earth models. Improvements to these models can be achieved by using additional data and reprocessing some earlier data. Plans for using satellite-to-satellite tracking and gravity gradiometers for the geopotential research mission are considered as well as the relative merits of each method. Present knowledge of solar system bodies and strategies for their exploration are also described. A core program for planetary exploration through the year 2000 is summarized as well as ten candidate subsequent missions. Of these, the lunar geoscience orbiter has the best justification for a gravity gradiometer since far side gravity data can be acquired without the requirement for a separate communications relay satellite. For rendezvous missions, the gradiometer can permit on-board automation of orbit computation and control thus reducing the time devoted to communication with an orbiter.

Source record↗
NASA NTRS1981

Study of a Tracking and Data Acquisition System (TDAS) in the 1990's

Progress in concept definition studies, operational assessments, and technology demonstrations for the Tracking and Data Acquisition System (TDAS) is reported. The proposed TDAS will be the follow-on to the Tracking and Data Relay Satellite System and will function as a key element of the NASA End-to-End Data System, providing the tracking and data acquisition interface between user accessible data ports on Earth and the user's spaceborne equipment. Technical activities of the "spacecraft data system architecture' task and the "communication mission model' task are emphasized. The objective of the first task is to provide technology forecasts for sensor data handling, navigation and communication systems, and estimate corresponding costs. The second task is concerned with developing a parametric description of the required communication channels. Other tasks with significant activity include the "frequency plan and radio interference model' and the "Viterbi decoder/simulator study'.

Source record↗